This was the original channel for Umarex USA. This channel will be removed during 4th quarter 2012. We apologize for any inconvenience and invite you to subscribe to the channel: UmarexAir.
MOST OF THESE VIDIO'S SUCK! I WOULD MOUNT THESE SCOPES THE SAME WAY I MOUNT HIG POWERED RIFLE SCOPES! # LEVELS # 2 TORQUE SCREWDRIVER # 3 LOCKTITE #4 BORESIGHT #5 SIGHT IN THE RIFLE #6 SHOOT THE RIFLE AND HAVE FUN😊
@dhanoa5310 ай бұрын
I just got this rife today. I did put a different scope on it because it has zoom. The stock scope is very clear I’m sure it’s good , but I shoot out to 25 yards and beyond. Very Impressed with this rifle. This is my first Gamo I have several other brands but I like this one as well.
@user-zw1ik3iy2c10 ай бұрын
Haven't had a chance to test if it holds zero, but mounts just fine and has nice clear glass. Centered vertically true to a plumb line with the crosshairs which is always a plus!It's a great kzread.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope. There's no parallax adjustment or focus ring, so may be limited to 3-7x, have to see how it is on the range. Also be aware that the rings are "look through" so you can still use irons, but they are really tall if you only intend to use the optics. On a 22LR no biggie since I'm not shooting competitions or worried about a hard cheek press. Will boresight and range test, if all goes well, I'll leave it at that!
@JohnDoe-jn3es Жыл бұрын
Installed scope then watching video realized missed couple steps to insure accuracy.. THANKS FOR VIDEO
@rayfoster6980 Жыл бұрын
.
@andyjame2978 Жыл бұрын
Easy peasy- and it works!!
@wishiknew1974 Жыл бұрын
Wow! Love it!
@dienal-hakim8649 Жыл бұрын
Quick install
@BootsEditor11 Жыл бұрын
Nice no nonsense tutorial. Thanks.
@jimcatanzaro7808 Жыл бұрын
No oil ?
@garystone8092 Жыл бұрын
So.....there is no need to apply any lubricant, anywhere?
@mikeford91762 жыл бұрын
Hope I didn’t mess up my gun. Put a few drops of rem oil on the spring. Has been sitting in my closet for a couple years
@barbgrosberg38872 жыл бұрын
I have searched and can find no kits (or separate sales) of all three oils listed in the video. Where can these be found?
@Dara-Baba2 жыл бұрын
Hi! Thank you for your video. My Indian springer air rifle’s manual insists on putting just one or 2 drops of oil into the chamber every100shots. They say it is important due to the humid and dusty conditions we have here. What oil would be best for this? Pretty sure the gun has a plastic piston.
@JesusChrist_IsTruth-LoveForALL Жыл бұрын
Silicone oil. Crosman makes a kind RMCOIL
@fredyounes12792 жыл бұрын
Where can I find maintenance videos for side cock RWS54 100 & 1000 shot?
@apriljoyvaldeavilla32482 жыл бұрын
Where can I buy that cleaning rod
@cesare3072 жыл бұрын
To me the Diana 52 will be the telescope with the normal mounts. The strong vibrations
@jeffestrada68572 жыл бұрын
The recoil screws will move the way you have done that. Also what about eye relief? No mention of bringing to the shoulder make sure relief is correct? Terrible demonstration black background means cant see whats going on. Old mate that sounds like Darth Vader is also all hands cant see past them👎👎👎👎
@carrompoolbiakropuia64092 жыл бұрын
🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
@roadstar4992 жыл бұрын
geeezz.what about wear to use pell gun oil???
@luthiervandros3 жыл бұрын
git em gooden taht
@ThaKidMarty3 жыл бұрын
HORRIBLE DEMONSTRATION
@andyprairiedog48293 жыл бұрын
Good stuff to know. Got the Umarex Targis Hunter and keeping up with the maintenance. Thank you, T-1000 looking guy and Mr. Cleaning Rod Guy. Very helpful.
@googleuser14563 жыл бұрын
I use cotton swabs, the kind to clean your ears, break them in 1/2 and shoot them through. So cheap and effective works great 👍
@hirammacduff88263 жыл бұрын
What a clown show!
@brianmchenry51123 жыл бұрын
No loctite no good
@jimmydeshazo13123 жыл бұрын
Can w d 40 specialist be used to lube the nitro piston on a break barrel air rifle? Help
@christopherarriaga86043 жыл бұрын
Howdy! I know its VERY late but do you still have this? Is it for sale?
@rushzeen3 жыл бұрын
hi, i just want to know, is it okay to use the type of grease that been used for vehicles. because its very hard to find such type made for guns in my country.
@rushzeen3 жыл бұрын
@@googleuser1456 how about chicken fried cooking oil. is it ok??
@mattbowman36414 жыл бұрын
Omg..i was just waiting for him to dry fire it at the end lol...😂🤣😂🤣
@stevek.19794 жыл бұрын
I just shoot pieces of Nerf football through the barrel with a couple pellets that cleans it out real good
@MtnBadger4 жыл бұрын
A bore guide would be advisable... Are there torque specs for tightening the stock screws, or is a noted effort to "hit the same mark" sufficient?
@GovtWatchdog2 жыл бұрын
A bore guide for a bore that small?? Do you know how insanely skinny the cleaning rod would have to be in order to use a bore guide on a .177 air rifle??
@MtnBadger2 жыл бұрын
@@GovtWatchdog Yeah, I thought about that after I wrote that. Just my over active, OCD mind always getting it's two cents in. 😆 I had one of these when I was young and now that I finally have another, I want to do everything I can to make it lasts. I decided a bit of a compound like a moldable plastic (silly putty, etc.) around the opening to keep things safe from dings would be functional if one wanted to go that far. I'm not crazy, just a frustrated scientist at heart who's always looking for new and exciting ways to over complicate things. Gives my mind something to think about while distracting myself from PTSS stuff, like working with my guns. It would be an interesting concept, though. Needle bore cleaning rods... 😆
@probegt754 жыл бұрын
Those two guys are some serious panty droppers
@quiropracticoculiacan14 жыл бұрын
“Get it saturated just a little bit” oxy moron
@eldonruhl54444 жыл бұрын
RWS..Or Fuenberkbau..#1
@eldonruhl54444 жыл бұрын
.22..Is Too Slow..Not Subsonic..
@eldonruhl54444 жыл бұрын
The Diana..#350 Magnum...177 Is Fastest Caliber..And More Powerful..I Can't See Anything Good About The Model#34??
@eldonruhl54444 жыл бұрын
I Have A RWS#350 Magnum..Way More Powerful&In My Opinion..Deadly ACCURATE..Morw Lux..If You Ask Me..Bigger. Better Looking..1350Fps.
@3rdeyespy9674 жыл бұрын
Uhhhh huh huh.......he said *Jag Off* huh huh huh huh
@J4ckieD4 жыл бұрын
What should I be using to lube the joints? Would the chamber oil be ok? I'm not having spring honking yet so I really only want to order one product.
@quiropracticoculiacan14 жыл бұрын
Chamber oil is silicone oil, not recommended for mainspring or hinges, use spring cylinder oil for that. Silicone not good for lubricating metal to metal surfaces.
@KimLensing5 жыл бұрын
i know for a fact that you should never shoot your gun without a bullet or 2 cottons. or else you can break your spring. your gun needs backpressure
@googleuser14563 жыл бұрын
Except Gamo rifles, they are designed to be dry fired without a problem
@redz208765 жыл бұрын
At the end of the video where he says you need to discharge the rifle, does he mean dry fire it?
@ohaleceiffel5 жыл бұрын
are they working on a RWS model 34 in this video?
@shipslab19485 жыл бұрын
*I have no complaints except for the terrible factory packaging>>>**arah.in/XJLx** which lets the butt end of the stock flop in the box around unsupported, levering against the barrel tip which is held in place with a piece of syrofoam. Check to see that the screw securing the barrel in place at the muzzle end of the stock are tight, or the barrel will move around and affect your accuracy. It takes a while to get used to the long trigger pull and non adjustable tension, but then it's darn accurate.*
@sportsandautomotives47395 жыл бұрын
Rws Diana 460 = Which best scope ?
@habibulbasher382 жыл бұрын
Hawke air max 3/9/40 AO
@herb27305 жыл бұрын
More like 50 shot and replace.IT'S AN IMPRESSIVE LOOKING PIECE OF JUNK !!! WANT ONE, I HAVE A 22 CAL MAKE ME AN OFFER. When I got it all looked fine, put a target out, got it sighted in, a few shots later the the cocking arm broke also braking the cocking lever at the pin and at the same time. That's when I found out the warranty was completely worthless. Being brand new I ordered the parts and fixed it myself. Same thing happened again. It may be defective, I wanted it replaced but good luck with that. Very serious I have one for sale if anyone wants it.
@AG.Floats5 жыл бұрын
Lol no propellant. The crud in the barrel is just the stuff they put on the outside of pellets so they don't rust. Lol you have to season your barrel to make it most accurate anyway. Lmao cleaning after 100 or 1000 shots no thanks. So unnecessary.
@EarthSurferUSA5 жыл бұрын
All metals do oxidize at differing rates, but "rust" is only associated with "ferrous metals", (metal with iron in it), like the barrel is probably made out of if it can rust. Lead has no iron in it, and they do not rust. Pellets may be coated with something, but I am sure many are raw also. One famous rust preventive for guns right out of the factories has been the use of "Cosmoline". en.wikipedia.org/wiki/Cosmoline Different manufactures use different rust inhibitors for shipping from the factory I am sure, but if they are anything like cosmoline, you better clean the barrel before you shoot IMO.
@quiropracticoculiacan14 жыл бұрын
Correct, just waste of time and money
@enricomemmoli73996 жыл бұрын
best co2 in the market,but it is't smooth in the bolt action.Lothar Walther barrel add lot of accuracy,worth every buck,light and solid, great rifle.
@regsparkes65076 жыл бұрын
What lousy camera work,...SHOW US WHAT HE'S DOING, NOT THE WHOLE DAMNED STAGE SETTING?
@bucsam16606 жыл бұрын
I haven't seen a cleaning kit for a .25 , what's up with that?
Пікірлер
MOST OF THESE VIDIO'S SUCK! I WOULD MOUNT THESE SCOPES THE SAME WAY I MOUNT HIG POWERED RIFLE SCOPES! # LEVELS # 2 TORQUE SCREWDRIVER # 3 LOCKTITE #4 BORESIGHT #5 SIGHT IN THE RIFLE #6 SHOOT THE RIFLE AND HAVE FUN😊
I just got this rife today. I did put a different scope on it because it has zoom. The stock scope is very clear I’m sure it’s good , but I shoot out to 25 yards and beyond. Very Impressed with this rifle. This is my first Gamo I have several other brands but I like this one as well.
Haven't had a chance to test if it holds zero, but mounts just fine and has nice clear glass. Centered vertically true to a plumb line with the crosshairs which is always a plus!It's a great kzread.infoUgkxc4K63Fd5LglDMObu7-Bgapxp_ef0W8hE scope. There's no parallax adjustment or focus ring, so may be limited to 3-7x, have to see how it is on the range. Also be aware that the rings are "look through" so you can still use irons, but they are really tall if you only intend to use the optics. On a 22LR no biggie since I'm not shooting competitions or worried about a hard cheek press. Will boresight and range test, if all goes well, I'll leave it at that!
Installed scope then watching video realized missed couple steps to insure accuracy.. THANKS FOR VIDEO
.
Easy peasy- and it works!!
Wow! Love it!
Quick install
Nice no nonsense tutorial. Thanks.
No oil ?
So.....there is no need to apply any lubricant, anywhere?
Hope I didn’t mess up my gun. Put a few drops of rem oil on the spring. Has been sitting in my closet for a couple years
I have searched and can find no kits (or separate sales) of all three oils listed in the video. Where can these be found?
Hi! Thank you for your video. My Indian springer air rifle’s manual insists on putting just one or 2 drops of oil into the chamber every100shots. They say it is important due to the humid and dusty conditions we have here. What oil would be best for this? Pretty sure the gun has a plastic piston.
Silicone oil. Crosman makes a kind RMCOIL
Where can I find maintenance videos for side cock RWS54 100 & 1000 shot?
Where can I buy that cleaning rod
To me the Diana 52 will be the telescope with the normal mounts. The strong vibrations
The recoil screws will move the way you have done that. Also what about eye relief? No mention of bringing to the shoulder make sure relief is correct? Terrible demonstration black background means cant see whats going on. Old mate that sounds like Darth Vader is also all hands cant see past them👎👎👎👎
🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
geeezz.what about wear to use pell gun oil???
git em gooden taht
HORRIBLE DEMONSTRATION
Good stuff to know. Got the Umarex Targis Hunter and keeping up with the maintenance. Thank you, T-1000 looking guy and Mr. Cleaning Rod Guy. Very helpful.
I use cotton swabs, the kind to clean your ears, break them in 1/2 and shoot them through. So cheap and effective works great 👍
What a clown show!
No loctite no good
Can w d 40 specialist be used to lube the nitro piston on a break barrel air rifle? Help
Howdy! I know its VERY late but do you still have this? Is it for sale?
hi, i just want to know, is it okay to use the type of grease that been used for vehicles. because its very hard to find such type made for guns in my country.
@@googleuser1456 how about chicken fried cooking oil. is it ok??
Omg..i was just waiting for him to dry fire it at the end lol...😂🤣😂🤣
I just shoot pieces of Nerf football through the barrel with a couple pellets that cleans it out real good
A bore guide would be advisable... Are there torque specs for tightening the stock screws, or is a noted effort to "hit the same mark" sufficient?
A bore guide for a bore that small?? Do you know how insanely skinny the cleaning rod would have to be in order to use a bore guide on a .177 air rifle??
@@GovtWatchdog Yeah, I thought about that after I wrote that. Just my over active, OCD mind always getting it's two cents in. 😆 I had one of these when I was young and now that I finally have another, I want to do everything I can to make it lasts. I decided a bit of a compound like a moldable plastic (silly putty, etc.) around the opening to keep things safe from dings would be functional if one wanted to go that far. I'm not crazy, just a frustrated scientist at heart who's always looking for new and exciting ways to over complicate things. Gives my mind something to think about while distracting myself from PTSS stuff, like working with my guns. It would be an interesting concept, though. Needle bore cleaning rods... 😆
Those two guys are some serious panty droppers
“Get it saturated just a little bit” oxy moron
RWS..Or Fuenberkbau..#1
.22..Is Too Slow..Not Subsonic..
The Diana..#350 Magnum...177 Is Fastest Caliber..And More Powerful..I Can't See Anything Good About The Model#34??
I Have A RWS#350 Magnum..Way More Powerful&In My Opinion..Deadly ACCURATE..Morw Lux..If You Ask Me..Bigger. Better Looking..1350Fps.
Uhhhh huh huh.......he said *Jag Off* huh huh huh huh
What should I be using to lube the joints? Would the chamber oil be ok? I'm not having spring honking yet so I really only want to order one product.
Chamber oil is silicone oil, not recommended for mainspring or hinges, use spring cylinder oil for that. Silicone not good for lubricating metal to metal surfaces.
i know for a fact that you should never shoot your gun without a bullet or 2 cottons. or else you can break your spring. your gun needs backpressure
Except Gamo rifles, they are designed to be dry fired without a problem
At the end of the video where he says you need to discharge the rifle, does he mean dry fire it?
are they working on a RWS model 34 in this video?
*I have no complaints except for the terrible factory packaging>>>**arah.in/XJLx** which lets the butt end of the stock flop in the box around unsupported, levering against the barrel tip which is held in place with a piece of syrofoam. Check to see that the screw securing the barrel in place at the muzzle end of the stock are tight, or the barrel will move around and affect your accuracy. It takes a while to get used to the long trigger pull and non adjustable tension, but then it's darn accurate.*
Rws Diana 460 = Which best scope ?
Hawke air max 3/9/40 AO
More like 50 shot and replace.IT'S AN IMPRESSIVE LOOKING PIECE OF JUNK !!! WANT ONE, I HAVE A 22 CAL MAKE ME AN OFFER. When I got it all looked fine, put a target out, got it sighted in, a few shots later the the cocking arm broke also braking the cocking lever at the pin and at the same time. That's when I found out the warranty was completely worthless. Being brand new I ordered the parts and fixed it myself. Same thing happened again. It may be defective, I wanted it replaced but good luck with that. Very serious I have one for sale if anyone wants it.
Lol no propellant. The crud in the barrel is just the stuff they put on the outside of pellets so they don't rust. Lol you have to season your barrel to make it most accurate anyway. Lmao cleaning after 100 or 1000 shots no thanks. So unnecessary.
All metals do oxidize at differing rates, but "rust" is only associated with "ferrous metals", (metal with iron in it), like the barrel is probably made out of if it can rust. Lead has no iron in it, and they do not rust. Pellets may be coated with something, but I am sure many are raw also. One famous rust preventive for guns right out of the factories has been the use of "Cosmoline". en.wikipedia.org/wiki/Cosmoline Different manufactures use different rust inhibitors for shipping from the factory I am sure, but if they are anything like cosmoline, you better clean the barrel before you shoot IMO.
Correct, just waste of time and money
best co2 in the market,but it is't smooth in the bolt action.Lothar Walther barrel add lot of accuracy,worth every buck,light and solid, great rifle.
What lousy camera work,...SHOW US WHAT HE'S DOING, NOT THE WHOLE DAMNED STAGE SETTING?
I haven't seen a cleaning kit for a .25 , what's up with that?