Hey Guys! This is AMN I'm a Curious Guy and specialize in the field of technology. I love to design and make things for the better tomorrow So Here I will Post Videos, More Interesting Content Related To Science, Technology, Craft, Creative, Do it yourself (DIY), Electronics, Tutorials,etc++++. Just Take a look Inside The Channel.
Пікірлер
Thank you bruh, it still worked
Cheers 🍻
ver good. Why didn't you use the piozo to give it up? I didn't fully understand its performance?
I can't understand your comment though. Could you please clarify?
@@Ciiads The outlet of the piezo disc should face upwards. Water vapor must also rise upwards. The orientation of your piezo disc is sideways. For this reason, the amount of steam output is not fully understood. But when you dropped a few drops of water by hand, very little steam came out. This means the steam output performance is poor. Your opinions are important. What is your suggestion to increase steam output?
You’re right, the piezo disc was placed vertically in the demo because we currently don't have a proper mechanism to mount it horizontally. This particular 1.77MHz ceramic piezo disc is solid and doesn’t have the tiny holes in the center like some other types. I want to clarify that I'm not hiding anything, what you see in the video is the exact output of this circuit at 12 Volts DC. If you find the steam output to be poor, that's an accurate reflection of the current setup. If you're looking to get more power, I recommend experimenting with over-volting the circuit within the piezo disk's safe operating limits, using thick tracks, and short, thick wires. Additionally, some viewers have modified this circuit with IGBTs to improve performance. You can find one such comment further down where they explained their modifications and component values, though they forgot to mention the IGBT part number. You can also see others' opinions from those who successfully built the circuit. Thank you for your suggestions! If you have more tips or insights, please share them. We're always looking to improve! We can make a better version soon.
@@Ciiads Thank you for your answers. In the country I live in, there is only a 1.7 MHz ceramic piezo. This must be the circuit I had to make. According to my research, only you have made this circuit. That's why I have to make this circuit in the best way possible. I need to adjust it to have good steam efficiency. thank you.
@@Throtmanni wish you all the best , good luck.
thats cool man! Can this circuit run the lower disk with 116 khz ?
@@fauzanhariz9589 no it's not but you can try that with ne555 chip.😊👍
hello , is there any way that somebody can still extract the hex file from arduino if the microcontroller has bootloader inside it aswell ? I have read in some forums that is possible to still extract the hex file from the microcontroller through the bootloader that is inside the mcu. how true is that ?
So chip erase then flash the without bootloader version of the hex file with the new fuse and lock bit settings. that's exactly what we did here 👍
i saw that you flashed all the 6 lock bits . BLB01 BLB11 BLB02BLB12 are 4 lock bits that are responsible to lock the bootloader . Since you have the hex file without the bootloader then why you are still programming those lock bits ? I think LB1 and LB2 are enough to program if you have a hex file without a bootloader on it .
@@Email-wg8je just closing all the doors as we can👍😁
Can u upload circuit diagram with components name
After I got the microphone, I mistakenly inserted the LR44 battery with reverse polarity inside the capsule and turned on the switch. Obviously, it didn't work, so after realizing my mistake, I corrected it by installing the battery with the correct polarity. It works, but there is a constant static noise in the recordings. Do you think I might have somehow damaged the circuitry inside the capsule?
avrdude error: invalid -P value: 'COM4' use -P usb:bus:device avrdude error: unable to open port COM4 for programmer arduinoisporg
simple and effective.. works fine... it only consume 0.6amp...... thanks
I have 3 Ceramic Piezo 20mm disks rated at 5MHz, 10MHz and 20MHz. What components in you circuit determine the resonant frequency?
wawww. thanks from srilanka
Welcome 😊♥️🤝
Nice build... Great explanation of audio post processing too!
Thank you so much for your kind words! I'm glad you enjoyed the video and found the explanation on audio post-processing helpful. Your support means a lot. Stay tuned for more DIY projects and tech tips! 😊 AMN CIIADS
hi. what is the size of the wire you use to make 150 micro henry inductor? and how many turns? thank you and i will appreciate your reply.
I can't recall that it's been a while ago and I think you can use coil32 software to calculate that😊♥️👍, and very sorry for my late reply. Regards, AMN
apart from his fake accent, nice video
Thanks for your judgement but this is how I talk and how my voice is it will be better soon.
nice wallpaper
I know you are kidding, but thank you for noticing. I appreciate your time. Regards, AMN ♥️
Dear Aneeshmurali Sir, excellent work and very nicely explained. Many appreciations. One doubt Sir, can we use a cheaper power transistor of IGBT or JFET or MOSFET? The power transistor 2SC5200 is very expensive in the market; it handles 230Volts and carries 30 Amps and so the cost is justified. However, a low cost alternative would be much better and non BJT colution will also eliminate the need of heatsink. Any suggestions on alternate part number of IGBT or JFET or MOSFET Sir? Regards,
Yes, someone made modifications to the circuit using an IGBT and provided positive feedback about the results. I read his comments further down, but he didn't mention the IGBT part number. He explained the other components well, but I think he forgot to include that detail. Give it a try 😊♥️👍
How to copy .obb and .apk files to Shared Folders in ES Explorer? It won't allow me to drag and drop.
Don't need to drag and drop, just copy and paste it.🤝👍
Hello dear Ciiads, your video inspired me to try myself, but unfortunally i couldnt get it to work with a 2,4mhz piezo, but but but, then i started to experiment and got it to work very beautifully and highly powerful. I used your circuit, with an igbt, and i used a 1,5k puldown resistor from gate to emitter, and i used a 220uH torioidal inductor. And i used a 3k resistor insead of 2,2. I powered with a 19v laptop power supply... This setup works amazing for me. Please share this very important information! ❤ Kisses from Germany. Thank you brother❤! PS I use this to power an ultrasonic e cig tank called usonicig. Unfortunally the company went bankrupt, so u can only buy the pods. I can share more details if you want me to...
That was great, I'm very glad to hear the good news and thanks for your valuable feedback I appreciate your patience and participation, can you share your modified circuit, and mention Your IGBT part number? This is my email: [email protected] If you want to contact me anyway. Nice to meet you. With love AMN ♥️🤝😊👍.
Lovely Brother, which hex file can i use with or without bootloader for my burned bootloader Atmega328p. pls!
Without bootloader 😊👍
Hello, this fog generator is 16 mm, I think it is 113 khz. Is there a chance to make a circuit that works with small voltages such as a battery charger between 5 v and 9 v that operates the pieszo? Could you please help me?
You can make 113khz version using ne555 chip which works with 5 to 9v , for further reference there is a tutorial on the Greatscott channel ☺️👍
@@Ciiads Can you share your tutorial with me so I can search among channel videos?
titles of the training video
BRO, can you design a circuit with help of working 2.4mhz and 48vdc
The diameter is 25 mm. How many volts can I use?
We can't Guess that , check datasheet 👍😊
Excuse me, how many volts am I allowed to add to this circuit? Please answer ❤️
Depends on the piezo disk working voltage.
Hi, dear Indian brother, I did everything in the video carefully and it worked. Thank you. I set it up with a 24V 3A adapter. Do you think I can connect two piezos to this board and it will work well? Your friend from Iran ❤️❤❤🇮🇷🇮🇳
If you want have close source, don't use open.
The chip itself is not open source, the video is about bit lock atmega. There is nothing wrong to use opensource development boards to develop firmware but you have to write every piece of code your self including librarys for a closed source project or you have to buy the lisence and need to credit properly. Arduino is opensource platform but atmega MCU's are not.
Hi, I really appreciate your video, detailed guides and attached resources. You have no idea how much it helped me. Although I couldn't make it work with 2 MEGA's as programmer and target, I repeated the steps using an UNO as the programmer instead, and it worked! Thank you once again!
Thank you
You are welcome 🤝😊
what is the name of the air fresh coming out?
Sorry brother. Didnt work
i followed every step multiple times but when i open the app it shows a gray screen and closes OK NVM IT WORKS NOW FOR SOME REASON THANK YOU
I want to lock only reading the code from ATtiny2313 microcontroller but I should write the code. What lock bits I need to set through AVRDUDE?
I have a question for you. Do you know of a way to install a OS from a keyboard like the Ensoniq EPS Classic or old Akai MPC drum machines on an ESP 32?
Getting "WARNING: Unable to detect MCU" Any suggestions?
Dang did this and now my Arduino isn't being recognized. Not showing up on device manager either. Any Advice?
If you're Arduino is Clown then the device manager will shows the serial chip name instead of Arduino name.
Brother kindly help me out. Need to use the same technique for Arduino Mega 2560.
Bom o circuito gostaria do esquema onde posso encontrar ?:
hoçam merhabalar bende bir sis üreten çihaz var çihazzın özellikleri içinde su varsa çalışıyor yoksa çalışmıyor bir şarj aleti veya iki adet 1.5 kalem pil ile çalışmaktadır piezosu bozuldu çalışmaz oldu ben yenisini aldım taktım çalışmadı yeni bir çihaz aldım piezosunu söküp buna taktım çalıştı bendeki piezoyu ona takıyorum gene çalışmıyor ikisini bir bağladığımda ikiside çalışıyor lakin orjinal piezoyu sökersem çihaz çalışmıyor neden olabilir hoçam aynı ölçülerde aldım piezoyu yardım edermisiniz rica etsem
anyone getting this error: avrdude: stk500_getsync(): not in sync: resp=0x00 ?
I had success with UNO as programmer and mega 2560 as a target. Thanks for this great video.
🤝You're welcome!🤗
I don't know how to install a mod apk on bluestacks following this passes. When i download the mod apk i can modify it with or extract it on winrar because gameloop open it automatically
Can use 100 uh 2.4 ampsToroidal DIP Inductor for this circuit?
I've discovered that radial inductors perform exceptionally well. While I haven't experimented with Toroidal dips, you might find them worth trying out. Inductors with thick copper consistently deliver the best results. Best of luck with your endeavors! AMN🤗
Thank you buddy@@Ciiads
How much maximum wire length can be use between circuit board and peizo disc @@Ciiads
Can i program that arduino board with new program ? And can we use eeprom and serial communication ?
No matter which board you're using, it's all about the chip. Of course, you can reprogram after a chip erase, and there are no restrictions for serial communication and EEPROM usage. However, you can't upload an Arduino sketch through the Arduino IDE because that requires a bootloader, and here we've disabled read and write access to the chip as part of the protection mechanism. If you don't need any protection for your software and want to revert everything back to normal, just erase the chip and burn the Arduino bootloader. Then, your Arduino board will be back to its original state. 😊 AMN
Thanks 👍👍👍👍👍👍👍👍
Thanks for the tutorial. I cannot view the content of obb folder. Also trying to put the save game file from my mobile to blue stack via my computer (with my phone connected) I cannot do it help please
Can you clarify the issue with screenshots and video it's my email [email protected].😊🫂
the fuqs with the accent?
Appreciate your curiosity! I'm not sure about wtf my accent is, and I hope you still find the content enjoyable. Apologies if it didn't meet your expectations. By the way, I switched my native language to English to make the content more accessible. I'm still practicing and improving. This video is a year old, so I invite you to check out my latest videos for the ongoing progress. Thanks for watching! 👍 Much Love, AMN😊♥️🤝
Another amazing video friend well done! 👏Your videos are very entertaining to watch and you explain it very well, you are one of the best electronics youtubers that I know.
Thank you!, I remember you; it means a lot to me, my friend. I always do my best with what I have. See you soon.😊🤗
👏
🎧 Immerse yourself in the world of sound! Put your headphones on and don't miss the post-processing steps I've revealed after recording, from noise reduction to effects and processing. Witness the journey that elevates the audio to a whole new level. 🔊 If you missed, that's a loss. Much love AMN😊
Thanks for sharing. Your insights are awesome.👍
🤝🫂😊
Wow❤
🤗
Superb
Thank you! 😊♥️