THANK YOU! I have the same TT2 but with the gold labels--it's my baby and I went to toss with a harder-throwing ex-teammate and on probably the fifth throw a ball busted right through the pocket. Went back and replaced the lace in the web today and this was a huge help!
@joeywozniak36466 күн бұрын
Bro, I love you
@frankiepag17207 күн бұрын
I think many of us had a Dale Murphy glove back then.
@joeywozniak36467 күн бұрын
I love you
@DIRTY30TN7 күн бұрын
Love you too bro
@johnnyrc930411 күн бұрын
I had to relace my daughter’s glove between tournaments, this was HUGELY helpful. Thank you!
@DIRTY30TN7 күн бұрын
Great job!
@zmot12 күн бұрын
Watched your standard lacing and was super confused, thankful I stumbled upon this one after the fact. Had no idea Wilson gloves laced slightly differently.
@29goshawk13 күн бұрын
great videos. what lacing do you use?
@DIRTY30TN7 күн бұрын
Tanners was used in this video.
@kpmcdonald119 күн бұрын
Also do you have to skive any lace for a catchers mitt like you might do for the palm lace on a fielders glove?
@DIRTY30TN7 күн бұрын
You can, but not necessary in most mitts. Unless it’s being annoying and digging into your hand I wouldn’t worry about it.
@kpmcdonald119 күн бұрын
Is this all 1/4 inch lace on the web and 3/16 on the rear of the glove?
@DIRTY30TN7 күн бұрын
Yessir
@lorimeyers3839Ай бұрын
Yeah I have an AMG 600 CW, it’s just over 20 years old. It’s a heavy glove, but a damn good one. I bought some saddle soap and I’m considering re-lacing it as well. Nice vid!
@jdc9318Ай бұрын
My son has a KBH13 and the finger laces cover the whole back of the fingers. And I think 1 whole piece of lace is used for the fingers and the spiral. Am I wrong? I want to relace the spiral 1 color and the fingers another. But I'm new to this and dont want to mess it up. Thanks!
@DIRTY30TNАй бұрын
That sounds right. Check my video for standard fingers/web spiral and it’ll show you how
@paulawoods7633Ай бұрын
Where do you get that? Great long needle?
@DIRTY30TNАй бұрын
This is a needle that Tanners used to sell long ago. You can get a similar one from AZ Glove Lab: azglovelab.bigcartel.com/category/glove-accessories
@sintesapa3027Ай бұрын
Helped me out alot today! I re-laced 2 gloved thanks to this video, thank you
@DIRTY30TNАй бұрын
Nice work!
@yusuftarantino5158Ай бұрын
Genius, MashaAllah Allahumabarik
@DIRTY30TNАй бұрын
Wa Jazakom Mithlaho
@steveblomerthАй бұрын
Wonderful job and very patient thorough instructions. When I saw the price tag to replace my Wilson A-2000 XLO at $300.00 I decided I must re-string it. (I paid 50-60 years ago which I thought was a lot at the time.
@LizzyL-cx2nrАй бұрын
LIFESAVER
@DIRTY30TNАй бұрын
✊
@jstngerald2 ай бұрын
Awesome tutorial!
@JUSTBASEBALLFORFUN2 ай бұрын
How do you get the lace thru the metal my needle is too big?
@DIRTY30TNАй бұрын
You’ll have to cut the lace at more of an angle and pull it through with needle nose pliers
@spencerbeyers2 ай бұрын
What size lace did you use for the web and fingers? 1/4 inch or 3/8 inch?
@DIRTY30TNАй бұрын
Always 1/4” for fingers and web, 3/16” for everywhere else
@jeremiahshangraw77832 ай бұрын
dude easiest DIY video I have ever watched. Absolute legend.
@jeffe46252 ай бұрын
Sheesh man i think i just went through all your vids looking for this answer..where did you get that lacing tool?? I have a tandy leather perma lock but yours looks so much longer definitely easier for pulling through the web.
@DIRTY30TN2 ай бұрын
That is an old needle that Tanners used to sell. AZ Glove Lab sells one very similar now. azglovelab.bigcartel.com/product/relacing-needles
@jeffe46252 ай бұрын
@@DIRTY30TN really appreciate the reply
@bob713402 ай бұрын
Awesome video but you need to put a disclaimer out that these can only be done while the palm is open, it’s impossible to do this job without the palm open
@eltistebilly2 ай бұрын
Thanks! You saved me
@DIRTY30TNАй бұрын
You are welcome!
@kwsrl2 ай бұрын
Thanks for the video. Great detail. Helped me tighten my Rawlings glove.
@DIRTY30TNАй бұрын
Great to hear!
@davidfialkow12322 ай бұрын
Great video. First time doing this and it wasn’t that hard with this step by step guide! Thanks.
@DIRTY30TNАй бұрын
You're welcome!
@francischarlebois37952 ай бұрын
This is awesome. Thanks a bunch
@francischarlebois37952 ай бұрын
Thanks a bunch mate!!
@DIRTY30TNАй бұрын
🤜🤛
@BrianFarnham2 ай бұрын
Thanks!
@DIRTY30TN2 ай бұрын
Any time!
@toddvanwoerkom82942 ай бұрын
You're a Godsend, thank you! My son is trying out for his school team today and his glove broke last night. Couldn't have fixed it without you! Thank you so much for your time and effort! Your camera shots, instructions and pace were perfect!
@DIRTY30TN2 ай бұрын
Very happy to hear that and glad it helped. Hope he makes the team!
@chrishill59632 ай бұрын
Awesome and thank you much!
@DIRTY30TN2 ай бұрын
You bet!
@johnmacdonald24932 ай бұрын
Thank you for the video and thanks for not going two hundred miles an hour showing how you lace it or just showing a before and after picture just did this to my 45-year-old the a2000 thank you
@DIRTY30TN2 ай бұрын
Love stories like this. Makes it all worth it!
@christopherramirez43543 ай бұрын
Can you point me in the direction to a first base glove how to. A2000 Wilson to be exact? Love the vids thanks!
@nolanmcleod19833 ай бұрын
Is there a whole lot of difference between a standard palm like this and a Japanese style with the two rows of laces on the thumb side?
@DIRTY30TN2 ай бұрын
Stiffness is the only thing I can think of
@bus535joyfully33 ай бұрын
Your video helped me greatly.
@snap-off53833 ай бұрын
I want to do a spiral on the bottom interior of my pocket on my catcher's mitt, it has its junction to the web pocket much lower and there's a lot of impact right at its seam, ever see such a thing as a spiral done there to fully protect that seam with replaceable lacing, or is it a bad idea for some reason I can't envision yet?
@davidhanrahan7173 ай бұрын
Thank you. Excellent video!,
@JuanTorres-jw8lp3 ай бұрын
Can you replace an I web to a 1 piece web?
@DIRTY30TN2 ай бұрын
Yes, I have done that mod before and the holes line up pretty well if I remember correctly
@russellstaker14853 ай бұрын
Wish you had posted a full relace video for this glove
@DIRTY30TN2 ай бұрын
This is not the first time I’ve heard this. May have to keep an eye out for a nice XL 🤔
@mrdottle85813 ай бұрын
Thank you!! Was able to save my 1980 Jim Rice glove. Awesome.
@DIRTY30TN2 ай бұрын
Love it!
@melissarhein20313 ай бұрын
Where can I get the new web itself, looked online and can’t seem to find it anywhere?
Пікірлер
Awesome work. Have a Jeter glove very similar.
THANK YOU! I have the same TT2 but with the gold labels--it's my baby and I went to toss with a harder-throwing ex-teammate and on probably the fifth throw a ball busted right through the pocket. Went back and replaced the lace in the web today and this was a huge help!
Bro, I love you
I think many of us had a Dale Murphy glove back then.
I love you
Love you too bro
I had to relace my daughter’s glove between tournaments, this was HUGELY helpful. Thank you!
Great job!
Watched your standard lacing and was super confused, thankful I stumbled upon this one after the fact. Had no idea Wilson gloves laced slightly differently.
great videos. what lacing do you use?
Tanners was used in this video.
Also do you have to skive any lace for a catchers mitt like you might do for the palm lace on a fielders glove?
You can, but not necessary in most mitts. Unless it’s being annoying and digging into your hand I wouldn’t worry about it.
Is this all 1/4 inch lace on the web and 3/16 on the rear of the glove?
Yessir
Yeah I have an AMG 600 CW, it’s just over 20 years old. It’s a heavy glove, but a damn good one. I bought some saddle soap and I’m considering re-lacing it as well. Nice vid!
My son has a KBH13 and the finger laces cover the whole back of the fingers. And I think 1 whole piece of lace is used for the fingers and the spiral. Am I wrong? I want to relace the spiral 1 color and the fingers another. But I'm new to this and dont want to mess it up. Thanks!
That sounds right. Check my video for standard fingers/web spiral and it’ll show you how
Where do you get that? Great long needle?
This is a needle that Tanners used to sell long ago. You can get a similar one from AZ Glove Lab: azglovelab.bigcartel.com/category/glove-accessories
Helped me out alot today! I re-laced 2 gloved thanks to this video, thank you
Nice work!
Genius, MashaAllah Allahumabarik
Wa Jazakom Mithlaho
Wonderful job and very patient thorough instructions. When I saw the price tag to replace my Wilson A-2000 XLO at $300.00 I decided I must re-string it. (I paid 50-60 years ago which I thought was a lot at the time.
LIFESAVER
✊
Awesome tutorial!
How do you get the lace thru the metal my needle is too big?
You’ll have to cut the lace at more of an angle and pull it through with needle nose pliers
What size lace did you use for the web and fingers? 1/4 inch or 3/8 inch?
Always 1/4” for fingers and web, 3/16” for everywhere else
dude easiest DIY video I have ever watched. Absolute legend.
Sheesh man i think i just went through all your vids looking for this answer..where did you get that lacing tool?? I have a tandy leather perma lock but yours looks so much longer definitely easier for pulling through the web.
That is an old needle that Tanners used to sell. AZ Glove Lab sells one very similar now. azglovelab.bigcartel.com/product/relacing-needles
@@DIRTY30TN really appreciate the reply
Awesome video but you need to put a disclaimer out that these can only be done while the palm is open, it’s impossible to do this job without the palm open
Thanks! You saved me
You are welcome!
Thanks for the video. Great detail. Helped me tighten my Rawlings glove.
Great to hear!
Great video. First time doing this and it wasn’t that hard with this step by step guide! Thanks.
You're welcome!
This is awesome. Thanks a bunch
Thanks a bunch mate!!
🤜🤛
Thanks!
Any time!
You're a Godsend, thank you! My son is trying out for his school team today and his glove broke last night. Couldn't have fixed it without you! Thank you so much for your time and effort! Your camera shots, instructions and pace were perfect!
Very happy to hear that and glad it helped. Hope he makes the team!
Awesome and thank you much!
You bet!
Thank you for the video and thanks for not going two hundred miles an hour showing how you lace it or just showing a before and after picture just did this to my 45-year-old the a2000 thank you
Love stories like this. Makes it all worth it!
Can you point me in the direction to a first base glove how to. A2000 Wilson to be exact? Love the vids thanks!
Is there a whole lot of difference between a standard palm like this and a Japanese style with the two rows of laces on the thumb side?
Stiffness is the only thing I can think of
Your video helped me greatly.
I want to do a spiral on the bottom interior of my pocket on my catcher's mitt, it has its junction to the web pocket much lower and there's a lot of impact right at its seam, ever see such a thing as a spiral done there to fully protect that seam with replaceable lacing, or is it a bad idea for some reason I can't envision yet?
Thank you. Excellent video!,
Can you replace an I web to a 1 piece web?
Yes, I have done that mod before and the holes line up pretty well if I remember correctly
Wish you had posted a full relace video for this glove
This is not the first time I’ve heard this. May have to keep an eye out for a nice XL 🤔
Thank you!! Was able to save my 1980 Jim Rice glove. Awesome.
Love it!
Where can I get the new web itself, looked online and can’t seem to find it anywhere?
www.usasportsdirect.com/Replacement-Glove-Webs.html
Please help me Relace this glove I wanted to change the laces and clean my glove but I don’t know show to Relace this glove 😔
Please help me I have this exact same glove and I wanted to change the laces on it please help me relacing 🙏🏻🙏🏻🙏🏻
Yeah man. Thanks for this video!! Very helpful
Thank you very much sir I was able to replace my sons broken glove with no experience. You are a lifesaver!
can you relace it
Cómo se.llama la aguja 🪡
Esa es una vieja aguja de Tanners. Puedes conseguir uno similar en theglovelab.com.
this is great, but I cant figure out how to re-lace that web
do you have a full video on how you laced this Tom Seaver glove?
Is that a crochet needle?