Thanks for this video! you helped alot! hope your channel grows too. Big help!!!
@APC99067 күн бұрын
Great video
@poiuy0987z15 күн бұрын
This video could have started at 6:44 and ended at 7:00
@fw14213 ай бұрын
The channel my door runs in has dents in it and the door bounces when opened. Looks like I’m gonna have to replace it.☹️
@sarahweddle78053 ай бұрын
Thank you!
@jorgecastro18943 ай бұрын
Thank you very, very much, this help me a lot. great video, God bless you!!!
@GustavoGarnica-qn5ew3 ай бұрын
Thank You !!!
@213BRANDONP4 ай бұрын
Dude you called pb blaster jb weld dont put jb weld on there it definitely will not roll lol
@qpham634 ай бұрын
Awesome, gonna do that for my door. My house is 52 y ears old. The tracks are worn, did not even know there's such a thing as a cap for it. Thank you for your time in putting the 3 parts together. I am printing stills so I can quick refer to this when I do the job. Again great job on the videos.
@kenstoller10794 ай бұрын
Great job and explaination...Thx. Ken.
@DianeRoman-bj5sg4 ай бұрын
Thank you for this video showing how to replace the rollers. How do you know what kind of rollers‘s to get? Or is it necessary to take out the old rollers first to match them up?
@msdeiafitness4 ай бұрын
do you have the link for the cover from Amazon?
@MrPerrycountyjoe6 ай бұрын
Three minutes of babbling before we get in to actually fixing anything, then he skips taking the door off. Worthless.
@diyfellow16276 ай бұрын
Thank you for taking out the time to comment! Have a great one!
@MrJammor8 ай бұрын
HAHAHAHA "God forbid you try to open it before you eat breakfast"!! That's the damn truth- I about threw a hammer through mine. THanks for the video man
@theswampfisher325310 ай бұрын
My problem with this is, I can’t find the parts
@lindarosa-torres782710 ай бұрын
THANK YOU!!
@jacquelyndavis443711 ай бұрын
Mine keeps going in circles I have no clue I've tried everything
@chumavera1 Жыл бұрын
Talks too much, and he didn't even showed how to remove the doors out of the track. Not a good presentation, sorry
@diyfellow1627 Жыл бұрын
Thanks for taking out the time to comment! Good luck to you!
@unclegeorge7845 Жыл бұрын
And how did you get the door out of the frame?
@siowboonchan4236 Жыл бұрын
laconic!!! 😀👍👍
@robertansbro9171 Жыл бұрын
have you ever changed the lock on that same door?
@dianew5911 Жыл бұрын
THANK YOU THANK YOU THANK YOU!!!!!!
@amyburrichter7891 Жыл бұрын
I'm wondering where to get a replacement left side rail for that exact same door
@nordicpride8360 Жыл бұрын
What website did you use? I have a sliding door that is very similar
@CarlosVilla-qn9ds7 ай бұрын
Some people are genius. Had you worked for a window company before
@ziapaige5751 Жыл бұрын
All this time, I thought we needed a new door. Amazing!! Thank you!
@brewman5563 Жыл бұрын
Excellent presentation. Thank you and God bless you.
@darcybaxter6902 Жыл бұрын
Helpful . Even though mine late 70s frames on west coast of Canada different. But assembly access same. Thanks
@ultraman33624 Жыл бұрын
THANK YOU for this extremely helpful video.
@mr.recruiterp3583 Жыл бұрын
Exactly what I need to do with mine which are era 1960. In fact I may have the identical door as yours.
@TheWaterman1000 Жыл бұрын
Why are some using epoxy glue and others silicon? I understand some like to glue down the guide.
@matteobombonato5840 Жыл бұрын
hey mate thanks. Your video helped me replace the broken glass from my sliding door. greetings from Australia :)
@jcrowgey668 Жыл бұрын
Great video. Hadn't thought about how the roller adjustment could be affecting the alignment of the door lock to the outside frame, nor did I realize that the tracks could actually be replaced. Your down to earth style and willingness to show your missteps will be extremely helpful to anyone who is attempting the same type of repair. Thanks!
@MtPockets14U Жыл бұрын
What a pain in the balls!! I happen to have the white 4' wide heavier doors.. sure is a chore handling them, Swisco is awesome for all these types of parts.. glad you gave a part# to save my ass some time!!
@BendyLemmy Жыл бұрын
Yes - so magically the door appears on a table. My door's stuck, and I can't take it out.
@diyfellow1627 Жыл бұрын
So mine was not hard to take out at all. You should be able to grab it by the sides, push up and then tilt the bottom down. That is how I did mine. If that doesn't work, on the bottom of the door there should be a place to put in a screw driver. That is where you should be able to adjust the height of rollers, I would adjust the rollers so it would give you more room to lift and tilt the bottom out. Hope that makes sense. ALSO you might have to have another person to help with the door, depending on the weight of the door!
@adrianotero7963 Жыл бұрын
Great video.....doing mine tomorrow.....what a coincidence I have the same cage and same colored Macaw.....they are very curious birds....yours is very well behaved....when you were hammering and he squaked ...mine let out a yell and raised his wings.....
@pjolleydd Жыл бұрын
If you are going to do how to videos you should at least get the names of your products you are using correct. PB blaster is not JB weld and it’s not WD-40 either totally different products totally different brands.
@diyfellow1627 Жыл бұрын
Thanks for taking out the time to comment!
@mohamedlmy78142 жыл бұрын
My car is Buick enclave 2014 and the key wouldn't come out as much as I tried so the only way to get it out is by giving it a jump ??
@spoiledbeans74022 жыл бұрын
Can we just take a minute to appreciate the Monkey in the cage??
@spoiledbeans74022 жыл бұрын
Ok not sure what I was seeing but its a parrot :-)
@15jody2 жыл бұрын
Seriously you couldn't just do that in one video.
@MAGAMAN2 жыл бұрын
"I've hear that the plastic ones are better" At breaking, maybe.
@J4Truman2 жыл бұрын
Luis, I want to thank you for these sets of videos. I’ve watched all of them and because of your unselfishness by giving to us your most precious asset - time - sharing your knowledge; has saved me thousands of dollars. Today I replaced one set of rollers and the sliding door that was installed in the 1960’s and now works like new for only 20$. I have three more doors to do now. Thanks again!!!
@benjamingorden2932 жыл бұрын
Thank you so much for posting this. I was at my wit's end trying to figure out what happened to mine. You really saved my day today.
@christophertalesfranklin83092 жыл бұрын
Hey, I know it's an old vid was this door the dual pane design with the gas in between?
@suze6of62 жыл бұрын
Thank You
@sonyaborgen97382 жыл бұрын
thank you. big help
@danielhoward83542 жыл бұрын
Not Amazon basically either you bought them from Amazon or you didnt
@TheKnceoincusa2 жыл бұрын
Where did u get the part ? What's the part #
@isallaboutthebicycle11262 жыл бұрын
Dude..... you ROCK!!!
@1caniac3272 жыл бұрын
no one cares what the green crap you're drinking is, just tell us what you found. geeeez
@diyfellow16272 жыл бұрын
Thanks for taking out the time to comment! I appreciate it. 😀
@seansean80082 жыл бұрын
i have had mine for 5 years and never once has it climbed a wall like that
Пікірлер
Thanks for this video! you helped alot! hope your channel grows too. Big help!!!
Great video
This video could have started at 6:44 and ended at 7:00
The channel my door runs in has dents in it and the door bounces when opened. Looks like I’m gonna have to replace it.☹️
Thank you!
Thank you very, very much, this help me a lot. great video, God bless you!!!
Thank You !!!
Dude you called pb blaster jb weld dont put jb weld on there it definitely will not roll lol
Awesome, gonna do that for my door. My house is 52 y ears old. The tracks are worn, did not even know there's such a thing as a cap for it. Thank you for your time in putting the 3 parts together. I am printing stills so I can quick refer to this when I do the job. Again great job on the videos.
Great job and explaination...Thx. Ken.
Thank you for this video showing how to replace the rollers. How do you know what kind of rollers‘s to get? Or is it necessary to take out the old rollers first to match them up?
do you have the link for the cover from Amazon?
Three minutes of babbling before we get in to actually fixing anything, then he skips taking the door off. Worthless.
Thank you for taking out the time to comment! Have a great one!
HAHAHAHA "God forbid you try to open it before you eat breakfast"!! That's the damn truth- I about threw a hammer through mine. THanks for the video man
My problem with this is, I can’t find the parts
THANK YOU!!
Mine keeps going in circles I have no clue I've tried everything
Talks too much, and he didn't even showed how to remove the doors out of the track. Not a good presentation, sorry
Thanks for taking out the time to comment! Good luck to you!
And how did you get the door out of the frame?
laconic!!! 😀👍👍
have you ever changed the lock on that same door?
THANK YOU THANK YOU THANK YOU!!!!!!
I'm wondering where to get a replacement left side rail for that exact same door
What website did you use? I have a sliding door that is very similar
Some people are genius. Had you worked for a window company before
All this time, I thought we needed a new door. Amazing!! Thank you!
Excellent presentation. Thank you and God bless you.
Helpful . Even though mine late 70s frames on west coast of Canada different. But assembly access same. Thanks
THANK YOU for this extremely helpful video.
Exactly what I need to do with mine which are era 1960. In fact I may have the identical door as yours.
Why are some using epoxy glue and others silicon? I understand some like to glue down the guide.
hey mate thanks. Your video helped me replace the broken glass from my sliding door. greetings from Australia :)
Great video. Hadn't thought about how the roller adjustment could be affecting the alignment of the door lock to the outside frame, nor did I realize that the tracks could actually be replaced. Your down to earth style and willingness to show your missteps will be extremely helpful to anyone who is attempting the same type of repair. Thanks!
What a pain in the balls!! I happen to have the white 4' wide heavier doors.. sure is a chore handling them, Swisco is awesome for all these types of parts.. glad you gave a part# to save my ass some time!!
Yes - so magically the door appears on a table. My door's stuck, and I can't take it out.
So mine was not hard to take out at all. You should be able to grab it by the sides, push up and then tilt the bottom down. That is how I did mine. If that doesn't work, on the bottom of the door there should be a place to put in a screw driver. That is where you should be able to adjust the height of rollers, I would adjust the rollers so it would give you more room to lift and tilt the bottom out. Hope that makes sense. ALSO you might have to have another person to help with the door, depending on the weight of the door!
Great video.....doing mine tomorrow.....what a coincidence I have the same cage and same colored Macaw.....they are very curious birds....yours is very well behaved....when you were hammering and he squaked ...mine let out a yell and raised his wings.....
If you are going to do how to videos you should at least get the names of your products you are using correct. PB blaster is not JB weld and it’s not WD-40 either totally different products totally different brands.
Thanks for taking out the time to comment!
My car is Buick enclave 2014 and the key wouldn't come out as much as I tried so the only way to get it out is by giving it a jump ??
Can we just take a minute to appreciate the Monkey in the cage??
Ok not sure what I was seeing but its a parrot :-)
Seriously you couldn't just do that in one video.
"I've hear that the plastic ones are better" At breaking, maybe.
Luis, I want to thank you for these sets of videos. I’ve watched all of them and because of your unselfishness by giving to us your most precious asset - time - sharing your knowledge; has saved me thousands of dollars. Today I replaced one set of rollers and the sliding door that was installed in the 1960’s and now works like new for only 20$. I have three more doors to do now. Thanks again!!!
Thank you so much for posting this. I was at my wit's end trying to figure out what happened to mine. You really saved my day today.
Hey, I know it's an old vid was this door the dual pane design with the gas in between?
Thank You
thank you. big help
Not Amazon basically either you bought them from Amazon or you didnt
Where did u get the part ? What's the part #
Dude..... you ROCK!!!
no one cares what the green crap you're drinking is, just tell us what you found. geeeez
Thanks for taking out the time to comment! I appreciate it. 😀
i have had mine for 5 years and never once has it climbed a wall like that