when you put the filter is the filter supposed to be marked as red still !?
@hadassaanouman84623 күн бұрын
I think you need to reset the filter
@Dan-TheHandyMan2 күн бұрын
Press and hold the filter reset button for about 3 seconds to reset the water filter. The colour of the indicator will change from red to blue, green or yellow. 6 Make sure you've turned the water supply back on (if you previously turned it off)
@jludtxs11 күн бұрын
How do I remove the water supply lines from the faucet? mine came attached but the lines don't fit my water lines. Mine doesn't have instructions on how to take the handle off. Any chance you have directions?
@SanctuaryofthePalmBeaches9 күн бұрын
Apologies for my delayed response. I'm currently traveling abroad. It's interesting that your new faucet came with pre-attached water lines. To disconnect them, hold the faucet with one hand and unscrew the water line counterclockwise from underneath the faucet.
@pamvines745816 күн бұрын
Thank you! You saved my husband's life. Lol
@domordono515429 күн бұрын
Thanks for the video
@SanctuaryofthePalmBeaches28 күн бұрын
Your welcome
@dougmichaelroossien9115Ай бұрын
I don't have water hooked up, after 9 months water filter light is on. Obviously,...it's a time in service warning. I have no water source as it's an extra fridge/freeze only. Any concerns of fridge shutdown eventually because of this warning?
@SanctuaryofthePalmBeachesАй бұрын
0% chance of it shutting down. it is only a reminder, try resetting the waring by telling it you have replaced the filter.
@stephanier9633Ай бұрын
Thank you! This was perfect.
@SanctuaryofthePalmBeachesАй бұрын
You are welcome, glad it work out.
@SanctuaryofthePalmBeaches16 күн бұрын
your welcome, these filters can be a pain sometimes.
@brentblanchard1830Ай бұрын
Nice video, was trying to find a detailed review and you nailed every question/concern I had. How’s it holding up so far?
@SanctuaryofthePalmBeachesАй бұрын
Thank you, Brent, The fan is performing wonderfully. It can be operated via remote control or voice commands with Google Assistant and Alexa. Two features I particularly appreciate are the wide range of fan speeds and the adjustable brightness of the light. When set to high, level 10, the fan spins as fast as a helicopter, :), but it can also be slowed down to a gentle breeze. The light's brightness is highly versatile, ranging from very dim to extremely bright.
@brentblanchard1830Ай бұрын
Outstanding! Was curious on fan speeds and noise level, south Texas is no joke with the heat so this really helps. Home Depot has them in stock so I’ll probably my grab one of these for a replacement for our old failing fan
@El-qr9wsАй бұрын
Did he said “it tells you the temperature” 😂 my boy fersure doing paid publicity to a higher level!
@KevinJonasx112 ай бұрын
just what i needed… thanks
@Dan-TheHandyMan2 ай бұрын
You are welcome, good luck.
@henrymuasml2 ай бұрын
thanks for the tip to go to messages and looking for reset filter. It's a lousy user interface design for Samsung. Simple one button design in Apps but they put it in a hard way for look for.
@Dan-TheHandyMan2 ай бұрын
You are welcome
@user-dr6bh9nu4q3 ай бұрын
Is this plumbed or unplumbed?
@Dan-TheHandyMan3 ай бұрын
Honestly, I not sure what you are asking. Forgive my ignorance.
@user-dr6bh9nu4q3 ай бұрын
@@Dan-TheHandyMan is this a plumbed fridge-freezer as in connected to the water mains.
@Dan-TheHandyMan3 ай бұрын
plumbed
@Dan-TheHandyMan3 ай бұрын
plumbed
@dougmichaelroossien9115Ай бұрын
I don't have water hooked up, after 9 months water filter light is on. Obviously,...it's a time in service warning. I have no water source as it's an extra fridge/freeze only. Any concerns of fridge shutdown eventually because of this warning?
@akiremasanchez3 ай бұрын
Do you happen to know why it comes with an extra long cushion cover? We just finished putting it together and can’t figure out how it goes. 🤦🏻♀️
@Dan-TheHandyMan3 ай бұрын
Interesting, as far as I know, I didn't have an extended cushion cover. We only had the necessary seat and back covers. It's been three years, and the unit still looks as good as the day we purchased it. Living in South Florida means we must store our cushions when they're not in use to protect them from the sun, which could otherwise damage them. Remarkably, the unit itself has stood up well to the intense Florida sun.
@russbollesjr853 ай бұрын
Can you please measure the distance from the base edge to a screw hole? I need that number to understand if I can use these. Thank you.
@SanctuaryofthePalmBeaches3 ай бұрын
Sorry for the delay in the response, the distance from the top of the base to the center of the screw hole is 4.75" or 4 3/4"
@user-vx5sp6rh3c3 ай бұрын
It can only be one or two things, the filter is being installed properly, such as not pushed in far enough or it is a defective filter. In the last couple of years these filters have been getting bad reviews. Not sure what happened to them. When I purchased mine it worked great.
@pacnonstop3233 ай бұрын
Hopefully you can respond to my issue. I have been using the same brand of filters for the past 2 years and yesterday i installed the new one and im experiencing problems. The pitcher isnt getting filled with water the area where the filter goes gets all wet. I remove the filter and the water dispenses normal. Any idea whats happening here?
@Dan-TheHandyMan4 ай бұрын
If the door seal was damage, contact the manufacturer to have it replaced. Hopefully it will be under warranty.
@AA-ct7cb4 ай бұрын
Mine leaks from the door, the rubber seal got caught in the sheets. But it’s a magnificent washer if that hadn’t happened.
@SanctuaryofthePalmBeaches4 ай бұрын
I regret to hear about the inconvenience with the faucet. However, I'm pleased that you were able to find a manual solution. Ours is installed in the guest bathroom, and our primary issue with the faucet is that guests often struggle to operate it. 😊 I am glad Kohler is taking care of you.
@ccalexander19244 ай бұрын
My plumber installed mine almost year ago. It stopped working. I changed batteries. Still not working. I guess I can use it manually at least ( I just learned that ). Kohler is sending me a new one since it’s still under warranty. I have two in the house. Makes me nervous how long these will last but at least I know now I use it manually when batteries stop working
@michaelberti76605 ай бұрын
And that was a totally useless video!
@janyfarias77845 ай бұрын
Se me mojo toda la cosina al meter el filtro🥲
@Dan-TheHandyMan5 ай бұрын
Aquí hay solo dos razones por las cuales esto podría haber sucedido. Uno, el filtro no se instaló correctamente y, por lo tanto, la junta tórica no pudo evitar la fuga. Dos, la junta tórica vieja está dañada. Por favor, inspeccione la junta tórica en el filtro y asegúrese de que no esté cortada. Asegúrese de que no haya daño en la carcasa donde va el filtro.
@papajoeknows83557 ай бұрын
If you have to rinse it off, then spray and forget is probably not the best name for the product.
@Dan-TheHandyMan7 ай бұрын
You are correct. I love the product "Spray and Forget" for sidewalks but after using the "Spray and Forget" for the roof (two different products). I was disappointed.
@stoichiometry1478 ай бұрын
Good info, thanks!
@Dan-TheHandyMan8 ай бұрын
Thanks
@Dan-TheHandyMan8 ай бұрын
feel free to ask any questions
@felma5399 ай бұрын
Have you had any issues with water getting through gap between the sliding doors? If so, how did you remedy that? Didn't take into account how big that gap is (about 1.5") & with how close the wall is to inner door (bit over 22"), splash back of water can get through - very minor but some water still manages to get through. I'm currently looking for vertical shower fin / guar to cover that gap. Any advice / suggestion appreciated!
@josephhollier98799 ай бұрын
What is the purpose of this video?
@josephhollier98799 ай бұрын
Tarnishing???
@Mb-nc8so9 ай бұрын
What causes the machine to not spin?
@SanctuaryofthePalmBeaches9 ай бұрын
There are several potential reasons why the Samsung Front Load Washer might not be spinning. Here are a few common issues: Unless you are fairly handy with working with these machines you will probably need a service technician to come out and see what is causing the problem. 1. Faulty Door Lock: The washer will not start the spin cycle if it detects that the door is not locked properly. This could be due to a faulty door lock mechanism or latch. 2. Blocked or Damaged Drain Pump: If the washer cannot drain the water properly, it won’t spin. A blockage or a faulty drain pump can cause this issue. 3. Unbalanced Load: An unbalanced load can prevent the washer from spinning properly. Adjusting the load or reducing the load size can often resolve this issue. 4. Worn Out Motor Coupler or Belt: The motor coupler or belt could be worn out or broken, preventing the washer from spinning. 5. Faulty Motor Control Board or Main Control Board: These components are responsible for controlling the motor and other functions of the washer. If either of them is faulty, the washer might not spin. 6. Faulty Rotor or Stator: These are integral parts of the motor, and any issue with them can lead to the washer not spinning. 7. Broken Lid Switch or Sensor: If the washer thinks the lid is open due to a faulty switch or sensor, it won’t spin. 8. Software or Firmware Issue: Sometimes, an issue with the software or firmware of the washer can cause functional problems, including issues with spinning. Troubleshooting Steps: Check Error Codes: Refer to the user manual or look up online to understand any error codes displayed on the washer. Check the Door Lock: Ensure the door is closed properly. If the door lock is faulty, it may need to be replaced. Inspect the Drain Pump and Hose: Check for blockages or damage in the drain pump and hose. Balance the Load: If the load is unbalanced, redistribute the clothes and try again. Check the Belt or Motor Coupler: Inspect these components for wear or damage and replace them if necessary. Perform a Software Reset: Unplug the washer for about 10 minutes to reset the electronic components, then plug it back in and try again. Contact a Professional: If you are unable to diagnose or resolve the issue, it may be best to contact a qualified appliance repair technician for further assistance. Note: Before performing any checks or repairs, always refer to the user manual for safety instructions and specific guidance for your model, and unplug the washer or turn off the power at the circuit breaker.
@MrPopo-bd1ix11 ай бұрын
Avoid Home Depot (HDX) water filters! My Samsung has the same exact housing and takes the same kinda water filter despite the fridge having a slight different model#; anyways the HDX brand got stuck in our refridgerator and when it came time to replace it we couldn't get it out despite turning-off our water and trying to put a wrench on it! So we had to call Geeksquad. BestBuy's tech people that come to your house. Thankfully the housing didn't break. Home Depot gave-us a full-refund but the technician visit costed between $115-$200! Go with either OEM Samsung or Lowe's brand! We've used the 2-pack "S-4-2" water filter from Lowe's no problem! Believe it or not, both Lowe's and BestBuy can price-match Amazon's price for their Samsung OEM filters which aren't that much more expensive! it's like $3-more than HDX if you do the math! Also the Samsung OEM brand doesn't require submerging it in water for an hour prior to installation and is easier to install! Btw, it's obvious that the filter you have is a review filter because they normally don't come in packaging like that. Is Home Depot paying you to make this video? Btw, Samsung says to run 3-gallons through it, Home depot and Lowes say 2.5-gal, (listen to Samsung) You should try pulling it back out after you run the water to make sure you can get it out.
@nellieolmedo64288 ай бұрын
I ordered this filter from Home Depot too, and it came packaged exactly the same. I am having trouble putting the new filter in 😢
@ar204311 ай бұрын
I just bought a couple of bottles of this to do my roof and I was under the impression through my research that we were supposed to just "spray and forget". I don't remember reading anything online about rinsing it off gently after applying it. I guess I'll wait and see what the bottle says. I have a feeling it's gonna tell me to rinse it off which is kind of misleading on their part if you ask me. Just one man's opinion.
@Dan-TheHandyMan11 ай бұрын
agree, I thought the same thing, after buying it I realized it had to be rinsed. I tried it both ways. I ultimately found myself rather dissatisfied with the outcome. I believe that the area where I allowed it to rest, letting the rain reactivate it gradually over time, performed better than the section where I sprayed it on, left it for a brief period, and then rinsed it off.
@adamwielowski3910 Жыл бұрын
P r o m o S M 💞
@ValOzuna Жыл бұрын
Just bought a set of these and the washer makes some pretty loud noise when starting the spin cycle. Wondering if this is normal or not. Makes noise at start of spin cycle then is good!
@Dan-TheHandyMan Жыл бұрын
This situation is far from normal. Either the machine is unbalanced, or there is an underlying issue. It is possible that something went wrong during delivery. Since you recently purchased the machine, I recommend contacting the merchant from whom you made the purchase. Hopefully, they will address the problem by providing a replacement or sending someone to assess the situation.
@claytonmurray4328 Жыл бұрын
Promo>SM
@AbdallaMahmoudz Жыл бұрын
Does it give a better noise isolation?
@Dan-TheHandyMan Жыл бұрын
It will give about a 50% reduction of noise if the brush touches the other glass door all the way from top to bottom.
@AbdallaMahmoudz Жыл бұрын
@Daniel Kyle Thanks, Daniel 👍
@4ourthLetta2010 Жыл бұрын
Was hoping to diy a retractable cordless bug screen for an out-facing window. Any suggestions? Maybe I could replace the blackout shade material with mesh netting - please give your thoughts (any comments, even from the comment section would be appreciated)
@Dan-TheHandyMan Жыл бұрын
Sorry for the late response. Have been doing a lot of traveling. One of the difficulties of the project that you are attempting will be its effectiveness. Without side tracking, the particular shade that I installed will not be effective keeping bugs out. The second difficulty is going to be attaching the screen to the current mechanism. I think it might be better if you just purchased something designed for what you're looking for. I've included a link below. I hope I did not misunderstand what it is that you were attempting to do. www.homedepot.com/p/Retractable-Bug-Screen-47-in-x-67-in-Adjustable-Width-Height-White-Aluminum-Fiberglass-Vertically-Retractable-Window-Insect-Screen-Frame-ZV05012017016/300268148?mtc=SHOPPING-BF-CDP-BNG-D30-030_022_WINDOWS-NA-NA-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-2023&cm_mmc=SHOPPING-BF-CDP-BNG-D30-030_022_WINDOWS-NA-NA-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-2023-71700000108165777-58700008322501150-92700075650798987&gclid=47fa929b48fb126fc022f6d9ed2feec3&gclsrc=3p.ds&msclkid=47fa929b48fb126fc022f6d9ed2feec3
@MikhailSpiridonov Жыл бұрын
Hi, Do you really need that step which is higher than the shower floor? Is it required to install these doors?
@Dan-TheHandyMan Жыл бұрын
Sorry for the late response, been doing a lot of traveling. No. The step is not required. That was the way the shower was built. We were just remodeling and installing the doors. Without the step. You would just lower the shower doors slightly. And they would glide inside the hardware that is provided, which would be mounted on the floor.
@Butterfly9481 Жыл бұрын
I am now online (the line being busy) trying to find out how to turn the Child Care option off on my washing machine.
@Dan-TheHandyMan Жыл бұрын
To turn off the child lock option on your Samsung front loader washer model WF50R8500AV, please follow these steps: 1. Press and hold the "Temp." and "Delay End" buttons at the same time for three seconds to activate the child lock feature. 2. Press and hold these buttons at the same time for three seconds again to disable the child lock feature. Once the child lock is disabled, you can use your washer normally.
@lilianalozano4308 Жыл бұрын
Is the tile on the walls beveled glass? If so, did you have any problem with it shattering when you drilled?
@Dan-TheHandyMan Жыл бұрын
Sorry for the late reply, have been out ot the country. The tile on the wall is standard glazed tile. It does have a texture to it and some curvature. When drilling into tile or glass always make sure you have the appropriate bit and you should not have a problem. They make special bits for tile and glass. Bosch - Carbide-Tipped Glass and Tile Drill Bit Set (8-Piece) www.thisoldhouse.com/windows/22332090/drilling-through-glass
@howstunningly Жыл бұрын
Took me a half hour to find this video with this particular filter ~ thanks so much for making this, I truly appreciate it!!!
@Dan-TheHandyMan Жыл бұрын
Welcome
@dawnburk5070 Жыл бұрын
You did not show HOW it was applied to the door
@Dan-TheHandyMan Жыл бұрын
Sorry I did not show the actual install in the video. You stick it to the backside of the frame of the sliding glass door that moves. Start at the top, peel the sticky part of the brush seal off the back (only about 6 inches). Stick it to the frame with the brush facing the other glass door. It will be a tight squeeze. Gradually make your way down slowly removing the paper off the back of the brush as you stick it to the frame. You will need a sharp knife or razor blade to cut it in the end.
@seangholipour3884 Жыл бұрын
Thanks for sharing, where do you get theses rollers from?
@Dan-TheHandyMan Жыл бұрын
Home Depot
@Arthur-Silva Жыл бұрын
You have to use the same chlorine that’s in your pool.
@The1andOnly1no Жыл бұрын
Hey average time to wash a normal regular load with this machine?
@Dan-TheHandyMan Жыл бұрын
45 minutes
@len9483 Жыл бұрын
Hello, I've got a question about a timer for a sprinkler. We have quail out here in Arizona in our tree outside our bedroom that are pooping everywhere under a specific tree all over our pool deck and wrought iron black fence. I've gone out there at dusk and sprayed into the trees and they scatter like crazy. One hour later, sometimes less, they are back. I was thinking of a timed sprinkler that would shoot into the tree every hour for about 4 seconds. Do you know how I would go about this? Their poop is everywhere!
@Dan-TheHandyMan Жыл бұрын
This might work best for your situation. It's a sprinkler that you hook up to a water hose and it has a day/night movement sensor detector on it. So, when it sees movement the sprinkler would turn on and spray up into the tree. You would of course need to point the sprinkler in that direction. The sensor works off of a battery. So, you can put it anywhere you can run a water hose. Hope this helps. Orbit 62100 Yard Enforcer Motion-Activated Sprinkler with Day & Night Detection Modes,Black www.amazon.com/Orbit-62100-Activated-Sprinkler-Detection/dp/B009F1R0GC/ref=asc_df_B009F1R0GC?tag=bingshoppinga-20&linkCode=df0&hvadid=79920803409782&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583520382215402&th=1
@llanbull Жыл бұрын
Thanks for the video. I was confused how to operate the door when you go in the shower. Your explanation is spot on.
@Dan-TheHandyMan Жыл бұрын
Glad it was a help
@llanbull Жыл бұрын
@@Dan-TheHandyMan We are actually installing it now. But this is a weird design bec. when you close it, there is a gap on both sides bec. of the rubber stopper. So it doesn't completely seals the water from coming out.
@Dan-TheHandyMan Жыл бұрын
@@llanbull Sorry it took so long to respond. Rewatch the end of the video. if the fram is properly installed the rubber bumper should be on the shower side of the frame.
@lilmamma807 Жыл бұрын
Thank you 🙂
@7minutosconlabiblia145 Жыл бұрын
Thanks !!!
@Dan-TheHandyMan Жыл бұрын
Your welcome, feel free to ask any questions. If I do not have the answer I will ask someone who does. Good luck adn have a blessed day.
@prenumenumedefamilie3418 Жыл бұрын
Hi Dany ! What is the inner and outer size in cm of those cinder blocks ?
@Dan-TheHandyMan Жыл бұрын
16 inches or 40.64 cm
@Dan-TheHandyMan Жыл бұрын
40cm X 40cm is the outer size, I do not know the inner size. The block looks to be about 2.5 -3 cm thick so that would give us about a 35cm X 35cm inner measurement.
@johnnyfromtheblock9990 Жыл бұрын
Nice video. doesn’t even show how you installed it. Dafaq
@mgaitan22 Жыл бұрын
Can you do a king comforter in this? I think it's 5.0 CU?
@Dan-TheHandyMan Жыл бұрын
I do not own a king comforter. I have washed a queen comforter in this machine. One of the things I like about front end loaders is that you can put large loads in and they come out clean. It realy depends on the thickness of the comforter. I say if you can get it in you can wash it.
Пікірлер
4:17 Are you stupid?
when you put the filter is the filter supposed to be marked as red still !?
I think you need to reset the filter
Press and hold the filter reset button for about 3 seconds to reset the water filter. The colour of the indicator will change from red to blue, green or yellow. 6 Make sure you've turned the water supply back on (if you previously turned it off)
How do I remove the water supply lines from the faucet? mine came attached but the lines don't fit my water lines. Mine doesn't have instructions on how to take the handle off. Any chance you have directions?
Apologies for my delayed response. I'm currently traveling abroad. It's interesting that your new faucet came with pre-attached water lines. To disconnect them, hold the faucet with one hand and unscrew the water line counterclockwise from underneath the faucet.
Thank you! You saved my husband's life. Lol
Thanks for the video
Your welcome
I don't have water hooked up, after 9 months water filter light is on. Obviously,...it's a time in service warning. I have no water source as it's an extra fridge/freeze only. Any concerns of fridge shutdown eventually because of this warning?
0% chance of it shutting down. it is only a reminder, try resetting the waring by telling it you have replaced the filter.
Thank you! This was perfect.
You are welcome, glad it work out.
your welcome, these filters can be a pain sometimes.
Nice video, was trying to find a detailed review and you nailed every question/concern I had. How’s it holding up so far?
Thank you, Brent, The fan is performing wonderfully. It can be operated via remote control or voice commands with Google Assistant and Alexa. Two features I particularly appreciate are the wide range of fan speeds and the adjustable brightness of the light. When set to high, level 10, the fan spins as fast as a helicopter, :), but it can also be slowed down to a gentle breeze. The light's brightness is highly versatile, ranging from very dim to extremely bright.
Outstanding! Was curious on fan speeds and noise level, south Texas is no joke with the heat so this really helps. Home Depot has them in stock so I’ll probably my grab one of these for a replacement for our old failing fan
Did he said “it tells you the temperature” 😂 my boy fersure doing paid publicity to a higher level!
just what i needed… thanks
You are welcome, good luck.
thanks for the tip to go to messages and looking for reset filter. It's a lousy user interface design for Samsung. Simple one button design in Apps but they put it in a hard way for look for.
You are welcome
Is this plumbed or unplumbed?
Honestly, I not sure what you are asking. Forgive my ignorance.
@@Dan-TheHandyMan is this a plumbed fridge-freezer as in connected to the water mains.
plumbed
plumbed
I don't have water hooked up, after 9 months water filter light is on. Obviously,...it's a time in service warning. I have no water source as it's an extra fridge/freeze only. Any concerns of fridge shutdown eventually because of this warning?
Do you happen to know why it comes with an extra long cushion cover? We just finished putting it together and can’t figure out how it goes. 🤦🏻♀️
Interesting, as far as I know, I didn't have an extended cushion cover. We only had the necessary seat and back covers. It's been three years, and the unit still looks as good as the day we purchased it. Living in South Florida means we must store our cushions when they're not in use to protect them from the sun, which could otherwise damage them. Remarkably, the unit itself has stood up well to the intense Florida sun.
Can you please measure the distance from the base edge to a screw hole? I need that number to understand if I can use these. Thank you.
Sorry for the delay in the response, the distance from the top of the base to the center of the screw hole is 4.75" or 4 3/4"
It can only be one or two things, the filter is being installed properly, such as not pushed in far enough or it is a defective filter. In the last couple of years these filters have been getting bad reviews. Not sure what happened to them. When I purchased mine it worked great.
Hopefully you can respond to my issue. I have been using the same brand of filters for the past 2 years and yesterday i installed the new one and im experiencing problems. The pitcher isnt getting filled with water the area where the filter goes gets all wet. I remove the filter and the water dispenses normal. Any idea whats happening here?
If the door seal was damage, contact the manufacturer to have it replaced. Hopefully it will be under warranty.
Mine leaks from the door, the rubber seal got caught in the sheets. But it’s a magnificent washer if that hadn’t happened.
I regret to hear about the inconvenience with the faucet. However, I'm pleased that you were able to find a manual solution. Ours is installed in the guest bathroom, and our primary issue with the faucet is that guests often struggle to operate it. 😊 I am glad Kohler is taking care of you.
My plumber installed mine almost year ago. It stopped working. I changed batteries. Still not working. I guess I can use it manually at least ( I just learned that ). Kohler is sending me a new one since it’s still under warranty. I have two in the house. Makes me nervous how long these will last but at least I know now I use it manually when batteries stop working
And that was a totally useless video!
Se me mojo toda la cosina al meter el filtro🥲
Aquí hay solo dos razones por las cuales esto podría haber sucedido. Uno, el filtro no se instaló correctamente y, por lo tanto, la junta tórica no pudo evitar la fuga. Dos, la junta tórica vieja está dañada. Por favor, inspeccione la junta tórica en el filtro y asegúrese de que no esté cortada. Asegúrese de que no haya daño en la carcasa donde va el filtro.
If you have to rinse it off, then spray and forget is probably not the best name for the product.
You are correct. I love the product "Spray and Forget" for sidewalks but after using the "Spray and Forget" for the roof (two different products). I was disappointed.
Good info, thanks!
Thanks
feel free to ask any questions
Have you had any issues with water getting through gap between the sliding doors? If so, how did you remedy that? Didn't take into account how big that gap is (about 1.5") & with how close the wall is to inner door (bit over 22"), splash back of water can get through - very minor but some water still manages to get through. I'm currently looking for vertical shower fin / guar to cover that gap. Any advice / suggestion appreciated!
What is the purpose of this video?
Tarnishing???
What causes the machine to not spin?
There are several potential reasons why the Samsung Front Load Washer might not be spinning. Here are a few common issues: Unless you are fairly handy with working with these machines you will probably need a service technician to come out and see what is causing the problem. 1. Faulty Door Lock: The washer will not start the spin cycle if it detects that the door is not locked properly. This could be due to a faulty door lock mechanism or latch. 2. Blocked or Damaged Drain Pump: If the washer cannot drain the water properly, it won’t spin. A blockage or a faulty drain pump can cause this issue. 3. Unbalanced Load: An unbalanced load can prevent the washer from spinning properly. Adjusting the load or reducing the load size can often resolve this issue. 4. Worn Out Motor Coupler or Belt: The motor coupler or belt could be worn out or broken, preventing the washer from spinning. 5. Faulty Motor Control Board or Main Control Board: These components are responsible for controlling the motor and other functions of the washer. If either of them is faulty, the washer might not spin. 6. Faulty Rotor or Stator: These are integral parts of the motor, and any issue with them can lead to the washer not spinning. 7. Broken Lid Switch or Sensor: If the washer thinks the lid is open due to a faulty switch or sensor, it won’t spin. 8. Software or Firmware Issue: Sometimes, an issue with the software or firmware of the washer can cause functional problems, including issues with spinning. Troubleshooting Steps: Check Error Codes: Refer to the user manual or look up online to understand any error codes displayed on the washer. Check the Door Lock: Ensure the door is closed properly. If the door lock is faulty, it may need to be replaced. Inspect the Drain Pump and Hose: Check for blockages or damage in the drain pump and hose. Balance the Load: If the load is unbalanced, redistribute the clothes and try again. Check the Belt or Motor Coupler: Inspect these components for wear or damage and replace them if necessary. Perform a Software Reset: Unplug the washer for about 10 minutes to reset the electronic components, then plug it back in and try again. Contact a Professional: If you are unable to diagnose or resolve the issue, it may be best to contact a qualified appliance repair technician for further assistance. Note: Before performing any checks or repairs, always refer to the user manual for safety instructions and specific guidance for your model, and unplug the washer or turn off the power at the circuit breaker.
Avoid Home Depot (HDX) water filters! My Samsung has the same exact housing and takes the same kinda water filter despite the fridge having a slight different model#; anyways the HDX brand got stuck in our refridgerator and when it came time to replace it we couldn't get it out despite turning-off our water and trying to put a wrench on it! So we had to call Geeksquad. BestBuy's tech people that come to your house. Thankfully the housing didn't break. Home Depot gave-us a full-refund but the technician visit costed between $115-$200! Go with either OEM Samsung or Lowe's brand! We've used the 2-pack "S-4-2" water filter from Lowe's no problem! Believe it or not, both Lowe's and BestBuy can price-match Amazon's price for their Samsung OEM filters which aren't that much more expensive! it's like $3-more than HDX if you do the math! Also the Samsung OEM brand doesn't require submerging it in water for an hour prior to installation and is easier to install! Btw, it's obvious that the filter you have is a review filter because they normally don't come in packaging like that. Is Home Depot paying you to make this video? Btw, Samsung says to run 3-gallons through it, Home depot and Lowes say 2.5-gal, (listen to Samsung) You should try pulling it back out after you run the water to make sure you can get it out.
I ordered this filter from Home Depot too, and it came packaged exactly the same. I am having trouble putting the new filter in 😢
I just bought a couple of bottles of this to do my roof and I was under the impression through my research that we were supposed to just "spray and forget". I don't remember reading anything online about rinsing it off gently after applying it. I guess I'll wait and see what the bottle says. I have a feeling it's gonna tell me to rinse it off which is kind of misleading on their part if you ask me. Just one man's opinion.
agree, I thought the same thing, after buying it I realized it had to be rinsed. I tried it both ways. I ultimately found myself rather dissatisfied with the outcome. I believe that the area where I allowed it to rest, letting the rain reactivate it gradually over time, performed better than the section where I sprayed it on, left it for a brief period, and then rinsed it off.
P r o m o S M 💞
Just bought a set of these and the washer makes some pretty loud noise when starting the spin cycle. Wondering if this is normal or not. Makes noise at start of spin cycle then is good!
This situation is far from normal. Either the machine is unbalanced, or there is an underlying issue. It is possible that something went wrong during delivery. Since you recently purchased the machine, I recommend contacting the merchant from whom you made the purchase. Hopefully, they will address the problem by providing a replacement or sending someone to assess the situation.
Promo>SM
Does it give a better noise isolation?
It will give about a 50% reduction of noise if the brush touches the other glass door all the way from top to bottom.
@Daniel Kyle Thanks, Daniel 👍
Was hoping to diy a retractable cordless bug screen for an out-facing window. Any suggestions? Maybe I could replace the blackout shade material with mesh netting - please give your thoughts (any comments, even from the comment section would be appreciated)
Sorry for the late response. Have been doing a lot of traveling. One of the difficulties of the project that you are attempting will be its effectiveness. Without side tracking, the particular shade that I installed will not be effective keeping bugs out. The second difficulty is going to be attaching the screen to the current mechanism. I think it might be better if you just purchased something designed for what you're looking for. I've included a link below. I hope I did not misunderstand what it is that you were attempting to do. www.homedepot.com/p/Retractable-Bug-Screen-47-in-x-67-in-Adjustable-Width-Height-White-Aluminum-Fiberglass-Vertically-Retractable-Window-Insect-Screen-Frame-ZV05012017016/300268148?mtc=SHOPPING-BF-CDP-BNG-D30-030_022_WINDOWS-NA-NA-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-2023&cm_mmc=SHOPPING-BF-CDP-BNG-D30-030_022_WINDOWS-NA-NA-NA-PLALIA-NA-NA-NA-NA-NBR-NA-NA-NA-2023-71700000108165777-58700008322501150-92700075650798987&gclid=47fa929b48fb126fc022f6d9ed2feec3&gclsrc=3p.ds&msclkid=47fa929b48fb126fc022f6d9ed2feec3
Hi, Do you really need that step which is higher than the shower floor? Is it required to install these doors?
Sorry for the late response, been doing a lot of traveling. No. The step is not required. That was the way the shower was built. We were just remodeling and installing the doors. Without the step. You would just lower the shower doors slightly. And they would glide inside the hardware that is provided, which would be mounted on the floor.
I am now online (the line being busy) trying to find out how to turn the Child Care option off on my washing machine.
To turn off the child lock option on your Samsung front loader washer model WF50R8500AV, please follow these steps: 1. Press and hold the "Temp." and "Delay End" buttons at the same time for three seconds to activate the child lock feature. 2. Press and hold these buttons at the same time for three seconds again to disable the child lock feature. Once the child lock is disabled, you can use your washer normally.
Is the tile on the walls beveled glass? If so, did you have any problem with it shattering when you drilled?
Sorry for the late reply, have been out ot the country. The tile on the wall is standard glazed tile. It does have a texture to it and some curvature. When drilling into tile or glass always make sure you have the appropriate bit and you should not have a problem. They make special bits for tile and glass. Bosch - Carbide-Tipped Glass and Tile Drill Bit Set (8-Piece) www.thisoldhouse.com/windows/22332090/drilling-through-glass
Took me a half hour to find this video with this particular filter ~ thanks so much for making this, I truly appreciate it!!!
Welcome
You did not show HOW it was applied to the door
Sorry I did not show the actual install in the video. You stick it to the backside of the frame of the sliding glass door that moves. Start at the top, peel the sticky part of the brush seal off the back (only about 6 inches). Stick it to the frame with the brush facing the other glass door. It will be a tight squeeze. Gradually make your way down slowly removing the paper off the back of the brush as you stick it to the frame. You will need a sharp knife or razor blade to cut it in the end.
Thanks for sharing, where do you get theses rollers from?
Home Depot
You have to use the same chlorine that’s in your pool.
Hey average time to wash a normal regular load with this machine?
45 minutes
Hello, I've got a question about a timer for a sprinkler. We have quail out here in Arizona in our tree outside our bedroom that are pooping everywhere under a specific tree all over our pool deck and wrought iron black fence. I've gone out there at dusk and sprayed into the trees and they scatter like crazy. One hour later, sometimes less, they are back. I was thinking of a timed sprinkler that would shoot into the tree every hour for about 4 seconds. Do you know how I would go about this? Their poop is everywhere!
This might work best for your situation. It's a sprinkler that you hook up to a water hose and it has a day/night movement sensor detector on it. So, when it sees movement the sprinkler would turn on and spray up into the tree. You would of course need to point the sprinkler in that direction. The sensor works off of a battery. So, you can put it anywhere you can run a water hose. Hope this helps. Orbit 62100 Yard Enforcer Motion-Activated Sprinkler with Day & Night Detection Modes,Black www.amazon.com/Orbit-62100-Activated-Sprinkler-Detection/dp/B009F1R0GC/ref=asc_df_B009F1R0GC?tag=bingshoppinga-20&linkCode=df0&hvadid=79920803409782&hvnetw=o&hvqmt=e&hvbmt=be&hvdev=c&hvlocint=&hvlocphy=&hvtargid=pla-4583520382215402&th=1
Thanks for the video. I was confused how to operate the door when you go in the shower. Your explanation is spot on.
Glad it was a help
@@Dan-TheHandyMan We are actually installing it now. But this is a weird design bec. when you close it, there is a gap on both sides bec. of the rubber stopper. So it doesn't completely seals the water from coming out.
@@llanbull Sorry it took so long to respond. Rewatch the end of the video. if the fram is properly installed the rubber bumper should be on the shower side of the frame.
Thank you 🙂
Thanks !!!
Your welcome, feel free to ask any questions. If I do not have the answer I will ask someone who does. Good luck adn have a blessed day.
Hi Dany ! What is the inner and outer size in cm of those cinder blocks ?
16 inches or 40.64 cm
40cm X 40cm is the outer size, I do not know the inner size. The block looks to be about 2.5 -3 cm thick so that would give us about a 35cm X 35cm inner measurement.
Nice video. doesn’t even show how you installed it. Dafaq
Can you do a king comforter in this? I think it's 5.0 CU?
I do not own a king comforter. I have washed a queen comforter in this machine. One of the things I like about front end loaders is that you can put large loads in and they come out clean. It realy depends on the thickness of the comforter. I say if you can get it in you can wash it.
@@Dan-TheHandyMan thanks