Very cool. I live in Neenah and visit the railyards around there often. Would be cool to see some Wisconsin Central SD45's and SD40-2's in this.
@vern19618 сағат бұрын
Once again thanks for the review. Decided to grab this in the current Steam sale. I mean the Steam reviews are very positive, with a few caveats about the train assets but seeing the route demonstrated in this and your other clips clinched it. Was either £12.49 for this or £12.99 for the TSW one handled Class 380 EMU - no contest really. Might even give the Berkshire and H9 steamers a run along it later.
@xray606Күн бұрын
People always complain about the scenery and stuff, but... I've been to this area countless times, and they definitely captured it overall.
@ZuluFoxtrotBEARКүн бұрын
Whose butt do we have to lick to get a U-Boat mod?
@nathanhaddock9688Күн бұрын
I downloaded and installed the F7 in the game and shows up in the mods menu on game startup but its not showing up in gameplay. What I'm doing wrong?
@jeffhale2982Күн бұрын
Brighter night skies: Preferences - Graphics - Post Exposure 2.0 - Contrast 0
@trainman1ishКүн бұрын
When running a freight service the PZB-mode is either 70 or 55 depending on the weight of the train and the max speed in the time schedule of the train. Top speed of most freight trains is 100 kph, which also depends on the state of the line.
@thomasparodies9730Күн бұрын
how do you change numbers/liveries for engines in the game?
@wildberrygarage43482 күн бұрын
Lol I 100% support full berk... but regardless, that 4-5% grade doesnt play and most trains probably need helpers!
@jereljackson69442 күн бұрын
Place your trailing locomotive (not MU’d) in manual with the brakes off and reverser in neutral. Now, place the handbrake on it-basically, turn on its handbrake (you can do this step first, as well). Then, select said trailing locomotive to have its brakes cut-out (ensure its brake cylinder is zero (you may have to click this a few times to get it to zero (also, you may have to set the lead locomotive to manual and release its TRAIN BRAKE))). Set your LEAD locomotive to AI Road Mode and set its target speed and its intended direction (THEN turn off all handbrakes-you can do this before trying to move, too). Once the lead locomotive is moving (at least 1 MPH), place your trailing locomotive in AI Road Mode and select the speed you want it to maintain (ideally the same as your lead locomotive’s target speed (e.g. 30 MPH). Once stopped, you can turn the trailing locomotive’s handbrake on and put it back into Manual Mode (ensure its brakes are cut back in). Ultimately, you can used AI Road Mode for any trailing locomotive as a “pusher/helper” once it’s in motion. 😊
@trevorstein46032 күн бұрын
Is the yard at Alarka Jct. a mod add on? I just got the wye built at Alarka but i havent seen that as an option for a milestone build.
@wildberrygarage43482 күн бұрын
It's part of the base game. There's a lot of work at that wye before you can get to alarka.
@jeffhale29822 күн бұрын
Thanks for the video. My layout runs from Sylva to Nantahala and I’m curious- when you expanded to Andrews, how much did that interchange take away from the Sylva interchange? Is there some breakpoint, like everything for Bryson and east starts in Sylva, everything west of Bryson starts in Andrews? Maybe the breakpoint is Alarka? Just curious, thanks.
@jeffhale29822 күн бұрын
I got my answer looking at your earlier episode when Andrews first opened. Everything comes and goes everywhere at both interchanges. Crazy.
@VeritechCEO2 күн бұрын
Just in case you're not aware, if you press "R" you get an Engine roster window on the screen. It's been a big help for me to quickly switch between engines.
@flenomusic2 күн бұрын
🥰🚂
@P_litzer2 күн бұрын
Can you make a video on how you customize your font?
@dupdrewww2 күн бұрын
Its a mod
@P_litzer2 күн бұрын
@@dupdrewww what mod
@saxtman70553 күн бұрын
I bought this instead of actually buying the game😅 now i aint got money left to buy it, but at least i got the ex BN patch unit
@monostripeexplosiveexplora23743 күн бұрын
I like a lot of the boats.. but it is kinda lacking a sailing boat
@lucasholstin25053 күн бұрын
you can mu the steamers they have to be in manual first but this is in the base game
@billbloggss4 күн бұрын
BIG thumbs up, just the BEST video!! And it provided maximum value because you didn't edit out the bloopers. Commentary clear and concise and the information soooooo valuable for a two day Run8 owner. Certainly challenging and probably more so wading through a 9 page print out of the key bindings but have, via luck and ....... more luck, managed to run two trains so there's that I suppose lol!!! The goal, after watching you operate, is to get my speed with the mouse and key selection quicker because it obviously makes such a difference. Very pleased with the sim so far although a new computer has become a priority after seeing your 'vision' by comparison. Much enjoyed and yes Billy Bob is a potential axe murderer given the stare😂😂
@kylehc154 күн бұрын
i love the detail on the locomotives more then i do the rest of the game lol sure some routes are decent but idk
@VeritechCEO4 күн бұрын
Boy, you have a lot to do on your railway! Currently, I only go from E. Whittier to Bryson. This is a typical (in-game) Day for me. 1. Yard switch in E. Whittier. 2. Yard Switch in Bryson. 3. Run Freight and Passenger trains from E. Whittier to Bryson, yard switch newly arrived freight cars, and then back to E. Whittier. 4. Run Lumber train, in Connelly Creek, back to Sawmill, Empty all 15 cars, and then send the Lumber train back up the creek for more logs. 5. Sleep to next day 6. Repeat 1-5 Plan to expand to Sylva next, soon.
@stevescott42664 күн бұрын
1, you can mu the steam engines coupled together. 2, you can dpu them via AI. The leads on both ends are set up the exact same and any trailing power are set as mu's. I always have mid and rear end helpers set up like dpus. You just can't set up the first helper as an mu, cut out. Just set them like they are leading a train.
@MrJMS8144 күн бұрын
Did they fix the height of the geep? I swear when this game first launched the geep looked short
@jamesonnewhouse12984 күн бұрын
Im getting to the point where railroader has become an actual job. Im about to unlock the red marble grade and it's so hard to keep up with what I have currently by myself.
@butthead69653 күн бұрын
I’ve gotten end to end unlocked. Not everything is t5 on contracts. And my day is between 10-13 hours. Just cut some stuff back if you wanna run the whole line.
@annhinchcliff54605 күн бұрын
you can MU the steam engines just couple them up to eachother
@wesw95864 күн бұрын
Yep. MU is suppoeted. Distributed power is not.
@Ethan_the_Railfan5 күн бұрын
Hey man. How you been? Love the vids. Keep working hard brotha!
@crazypete88885 күн бұрын
You know when Schnauz doesn't flat out sh*t on a TSW DLC it must be pretty good.
@davidhill81636 күн бұрын
great commentary i hope you are enjoying the route
@80_aychdee6 күн бұрын
can i still get this enhancement pack today? the pack was taken down and I'm having trouble after making the deadly mistake of buying the pack from the early years livery pack from the steam store :/
@SeanBodine6 күн бұрын
Haha, FJB, I get it. Very good.
@colbylawson53317 күн бұрын
The devs need to add some more horns. You can never have too many horns, besides, variety is important in any Train Simulator, especially considering that a lot locomotives were fitted with various horns.
@psych_11237 күн бұрын
Did they ever get the horn?
@darylhannon47239 күн бұрын
I was an engineer on BCRAIL.
@railwaycafe9 күн бұрын
Part 3 plsss
@crazygecko53859 күн бұрын
It's nice to finally have a German mainline diesel on TSW and a decent quality one as well. Not sure if its just me but does it feel a bit unoptimised as it seems to stutter in spots compared to other locos?
@potatoman4518 күн бұрын
Tsw as a whole is unoptimized
@melikeplanes9 күн бұрын
San Diego doesn't even get grain trains........
@donovanferrari76110 күн бұрын
Nice locomotive, but that horn kind of ruins it for me.
@True_NOON10 күн бұрын
Hamburg lübeck was from TSW 2 , IIRC after SKA as the german one but before Riesa heaven It does make sense , the services onwards to kiel and Puttgarden are under non-electrified section of track
@yerolo10 күн бұрын
Thanks for the review. There are actually manual valves for the PZB & Sifa, you need to go to the #2 end and there is a hatch below the hand brake containing both. I find it alot easier just to do ctrl+enter for PZB and shift+enter for sifa though (it saves hunting around for the switches/valves)
@schnauzahpowahz10 күн бұрын
@@yerolo ha, thanks. I looked around but didnt see anything extra in the 2nd cab, admittedly not very long
@SEWisconsinRailfan11 күн бұрын
Very nice route! As a crazy train nut who's been up and down this line many times, it's cool to see how accurate it is. There's obviously some flaws I noticed, but other than that it looks really good and accurate!
@mihailm175311 күн бұрын
Annoying, Vectron! He wants us to make certain changes during the race, we do them, but then he takes it back and takes us out of the game! I follow the steps in the guide and it does the same!
@DynamicDuo79511 күн бұрын
Does this map run west of Port Jervis up the old Erie Delaware Division, and can you run a freight train on this particular route?
@minermantherailfan695Күн бұрын
Runs past Mill Rift 2 miles, so halfway to Pind Eddy. Done because i fished the Delaware and had lunch at the Mill Rift Inn. For the route this section allows for freight to come off the Delaware Div to go east. Route was designed as a fully funtioning frieight experience ala the great Erie Lackawanna!
@oenta8311 күн бұрын
You dont need maintalbahn for it, it is a standalone dlc. But ofcourse this dlc works best with hamburg or maintalbahn route dlc
@BigMeechEJ2510 күн бұрын
He kinda just mispoke, I'm sure he was referring to content he was about to show on the route.
@nikospapageorgiou5711 күн бұрын
Great review! Very nice visual details, great engine sound, really bad horn sound, the rest of the sounds are just average. Hate the typical unoptimisation of the game though, dropping frames when rendering the environment Infront of the locomotive, looks so bad...
@haegenbyrne11 күн бұрын
CSX 1176 is from the SCL era it’s former SCL 4206
@flenomusic11 күн бұрын
22:42 😆😀HA😜😃HA😃😄🕺 🚂💨 😘
@flenomusic11 күн бұрын
08:08 A truly very appreciable statement and considerations in general, lieber Schnauzahpowahz 🥰, just as one would be accustomed to and expect from you. It’s great that you always manage to get right to the point!😘🤪🤗Amüsant ꒰ und 💎 👸✨ 😃 🌸🌟. 🌸 🍀☀🐞🐷🎩 Dankeschön 💐 🥰 👌🏼👍🏼 👑
Пікірлер
Very cool. I live in Neenah and visit the railyards around there often. Would be cool to see some Wisconsin Central SD45's and SD40-2's in this.
Once again thanks for the review. Decided to grab this in the current Steam sale. I mean the Steam reviews are very positive, with a few caveats about the train assets but seeing the route demonstrated in this and your other clips clinched it. Was either £12.49 for this or £12.99 for the TSW one handled Class 380 EMU - no contest really. Might even give the Berkshire and H9 steamers a run along it later.
People always complain about the scenery and stuff, but... I've been to this area countless times, and they definitely captured it overall.
Whose butt do we have to lick to get a U-Boat mod?
I downloaded and installed the F7 in the game and shows up in the mods menu on game startup but its not showing up in gameplay. What I'm doing wrong?
Brighter night skies: Preferences - Graphics - Post Exposure 2.0 - Contrast 0
When running a freight service the PZB-mode is either 70 or 55 depending on the weight of the train and the max speed in the time schedule of the train. Top speed of most freight trains is 100 kph, which also depends on the state of the line.
how do you change numbers/liveries for engines in the game?
Lol I 100% support full berk... but regardless, that 4-5% grade doesnt play and most trains probably need helpers!
Place your trailing locomotive (not MU’d) in manual with the brakes off and reverser in neutral. Now, place the handbrake on it-basically, turn on its handbrake (you can do this step first, as well). Then, select said trailing locomotive to have its brakes cut-out (ensure its brake cylinder is zero (you may have to click this a few times to get it to zero (also, you may have to set the lead locomotive to manual and release its TRAIN BRAKE))). Set your LEAD locomotive to AI Road Mode and set its target speed and its intended direction (THEN turn off all handbrakes-you can do this before trying to move, too). Once the lead locomotive is moving (at least 1 MPH), place your trailing locomotive in AI Road Mode and select the speed you want it to maintain (ideally the same as your lead locomotive’s target speed (e.g. 30 MPH). Once stopped, you can turn the trailing locomotive’s handbrake on and put it back into Manual Mode (ensure its brakes are cut back in). Ultimately, you can used AI Road Mode for any trailing locomotive as a “pusher/helper” once it’s in motion. 😊
Is the yard at Alarka Jct. a mod add on? I just got the wye built at Alarka but i havent seen that as an option for a milestone build.
It's part of the base game. There's a lot of work at that wye before you can get to alarka.
Thanks for the video. My layout runs from Sylva to Nantahala and I’m curious- when you expanded to Andrews, how much did that interchange take away from the Sylva interchange? Is there some breakpoint, like everything for Bryson and east starts in Sylva, everything west of Bryson starts in Andrews? Maybe the breakpoint is Alarka? Just curious, thanks.
I got my answer looking at your earlier episode when Andrews first opened. Everything comes and goes everywhere at both interchanges. Crazy.
Just in case you're not aware, if you press "R" you get an Engine roster window on the screen. It's been a big help for me to quickly switch between engines.
🥰🚂
Can you make a video on how you customize your font?
Its a mod
@@dupdrewww what mod
I bought this instead of actually buying the game😅 now i aint got money left to buy it, but at least i got the ex BN patch unit
I like a lot of the boats.. but it is kinda lacking a sailing boat
you can mu the steamers they have to be in manual first but this is in the base game
BIG thumbs up, just the BEST video!! And it provided maximum value because you didn't edit out the bloopers. Commentary clear and concise and the information soooooo valuable for a two day Run8 owner. Certainly challenging and probably more so wading through a 9 page print out of the key bindings but have, via luck and ....... more luck, managed to run two trains so there's that I suppose lol!!! The goal, after watching you operate, is to get my speed with the mouse and key selection quicker because it obviously makes such a difference. Very pleased with the sim so far although a new computer has become a priority after seeing your 'vision' by comparison. Much enjoyed and yes Billy Bob is a potential axe murderer given the stare😂😂
i love the detail on the locomotives more then i do the rest of the game lol sure some routes are decent but idk
Boy, you have a lot to do on your railway! Currently, I only go from E. Whittier to Bryson. This is a typical (in-game) Day for me. 1. Yard switch in E. Whittier. 2. Yard Switch in Bryson. 3. Run Freight and Passenger trains from E. Whittier to Bryson, yard switch newly arrived freight cars, and then back to E. Whittier. 4. Run Lumber train, in Connelly Creek, back to Sawmill, Empty all 15 cars, and then send the Lumber train back up the creek for more logs. 5. Sleep to next day 6. Repeat 1-5 Plan to expand to Sylva next, soon.
1, you can mu the steam engines coupled together. 2, you can dpu them via AI. The leads on both ends are set up the exact same and any trailing power are set as mu's. I always have mid and rear end helpers set up like dpus. You just can't set up the first helper as an mu, cut out. Just set them like they are leading a train.
Did they fix the height of the geep? I swear when this game first launched the geep looked short
Im getting to the point where railroader has become an actual job. Im about to unlock the red marble grade and it's so hard to keep up with what I have currently by myself.
I’ve gotten end to end unlocked. Not everything is t5 on contracts. And my day is between 10-13 hours. Just cut some stuff back if you wanna run the whole line.
you can MU the steam engines just couple them up to eachother
Yep. MU is suppoeted. Distributed power is not.
Hey man. How you been? Love the vids. Keep working hard brotha!
You know when Schnauz doesn't flat out sh*t on a TSW DLC it must be pretty good.
great commentary i hope you are enjoying the route
can i still get this enhancement pack today? the pack was taken down and I'm having trouble after making the deadly mistake of buying the pack from the early years livery pack from the steam store :/
Haha, FJB, I get it. Very good.
The devs need to add some more horns. You can never have too many horns, besides, variety is important in any Train Simulator, especially considering that a lot locomotives were fitted with various horns.
Did they ever get the horn?
I was an engineer on BCRAIL.
Part 3 plsss
It's nice to finally have a German mainline diesel on TSW and a decent quality one as well. Not sure if its just me but does it feel a bit unoptimised as it seems to stutter in spots compared to other locos?
Tsw as a whole is unoptimized
San Diego doesn't even get grain trains........
Nice locomotive, but that horn kind of ruins it for me.
Hamburg lübeck was from TSW 2 , IIRC after SKA as the german one but before Riesa heaven It does make sense , the services onwards to kiel and Puttgarden are under non-electrified section of track
Thanks for the review. There are actually manual valves for the PZB & Sifa, you need to go to the #2 end and there is a hatch below the hand brake containing both. I find it alot easier just to do ctrl+enter for PZB and shift+enter for sifa though (it saves hunting around for the switches/valves)
@@yerolo ha, thanks. I looked around but didnt see anything extra in the 2nd cab, admittedly not very long
Very nice route! As a crazy train nut who's been up and down this line many times, it's cool to see how accurate it is. There's obviously some flaws I noticed, but other than that it looks really good and accurate!
Annoying, Vectron! He wants us to make certain changes during the race, we do them, but then he takes it back and takes us out of the game! I follow the steps in the guide and it does the same!
Does this map run west of Port Jervis up the old Erie Delaware Division, and can you run a freight train on this particular route?
Runs past Mill Rift 2 miles, so halfway to Pind Eddy. Done because i fished the Delaware and had lunch at the Mill Rift Inn. For the route this section allows for freight to come off the Delaware Div to go east. Route was designed as a fully funtioning frieight experience ala the great Erie Lackawanna!
You dont need maintalbahn for it, it is a standalone dlc. But ofcourse this dlc works best with hamburg or maintalbahn route dlc
He kinda just mispoke, I'm sure he was referring to content he was about to show on the route.
Great review! Very nice visual details, great engine sound, really bad horn sound, the rest of the sounds are just average. Hate the typical unoptimisation of the game though, dropping frames when rendering the environment Infront of the locomotive, looks so bad...
CSX 1176 is from the SCL era it’s former SCL 4206
22:42 😆😀HA😜😃HA😃😄🕺 🚂💨 😘
08:08 A truly very appreciable statement and considerations in general, lieber Schnauzahpowahz 🥰, just as one would be accustomed to and expect from you. It’s great that you always manage to get right to the point!😘🤪🤗Amüsant ꒰ und 💎 👸✨ 😃 🌸🌟. 🌸 🍀☀🐞🐷🎩 Dankeschön 💐 🥰 👌🏼👍🏼 👑