Your go kart looks so cool!! Am looking for a affordable rear and front axel for a plan
@WhatIsTheWheel13 күн бұрын
I got most of my parts from OMB warehouse and some stuff from Amazon
@TheAnthonyBrandi21 күн бұрын
I found it easier when it's bolt to the engine.
@user-sv4dw2hu5f22 күн бұрын
U talk way too much!!
@WhatIsTheWheel22 күн бұрын
This is not the first time I have heard that
@Frank-et2hgАй бұрын
I see a can of Kroil on that bench, I wish I could still find that stuff locally is phenomenal
@WhatIsTheWheelАй бұрын
It is great. I think I had to order it.
@speedfinder1Ай бұрын
I'm puzzled! EVERYTHING on a Royal Enfield 650 is METRIC..... Why did you just no use a 27mm Metric socket as the factory intended? No need to ruin a perfectly good nut with a sander. 🫣.
@WhatIsTheWheelАй бұрын
It is not a 27mm socket it is a 27mm Hex or Allen. They start around $25 and require 1" drive tools. The tool I made used the nut I ground down in the video and a cracked socket I had in my junk drawer, the cost was less than $2. The socket was trash, but I kept it for a purpose just like this.
@facmptrАй бұрын
what’s the value of it?
@BIGHIM87Ай бұрын
Where did you find those tires?
@WhatIsTheWheelАй бұрын
Amazon Look up Vevor Go Kart wheels They come with the rim and tire as pairs(or maybe the set of 4)
@HappyHands.Ай бұрын
Comprimising the pressure chamber of the regulator is a bad idea. I would instead make a mount that used the existing seal/flange bolts and just use longer bolts.
@charlesgraham9954Ай бұрын
went from a few hundred dollars to well over 2 grand, but i have to say it is fun building these lil engines. its shocking what a lil 212 will do blownout.
@francoreia8147Ай бұрын
What if those weights are different in weight
@stanleyshults6427Ай бұрын
You started good ,but ur tooling needs replaced,4 different porting work you left a lot to be taken out 4 flow also,i,I, rate it at a 5 on porting,sorry ,guy!!!!!
@Mr.GoKartАй бұрын
i put more weight in the front and turns perfect now
@WhatIsTheWheelАй бұрын
Balance is a big deal for sure. If you have a cart where you can move the seat front to back and change that balance, especially on something as light as a cart, You can really make a big difference in how it handles.
@kgol4686Ай бұрын
Ops I'm sorry you did put it in right the engine was the opposite way so it screw me up sorry about that
@kgol4686Ай бұрын
Just so u know u put your connecting rod in wrong the dipper should have been facing down
@WhatIsTheWheelАй бұрын
It is facing the correct direction. It has a spoon shape on one side to force oil into the big end and it points in the direction of rotation
@mockbattlesАй бұрын
I love the style of the Bullit but the wind noise is intolerable.
@WhatIsTheWheelАй бұрын
It is the noisiest helmet I have ever owned
@davidmalinowski7930Ай бұрын
Just got one for $75 to shred waste hay, putting a $175 6.6 hp predator on it
@nilla0032 ай бұрын
What manufacturer is that frame?
@WhatIsTheWheel2 ай бұрын
It has Rob Ron stickers on it but I spoke with a guy that has the original jigs and said it was a knock off.
@MexicanPoro2 ай бұрын
Where are you lifting the car from?
@midnightblue692 ай бұрын
How impressive, its mulches pinecones fed individually 🙄 was there a point to this vid?
@WhatIsTheWheelАй бұрын
The point is engagement, and it worked. It will turn a 30g bin of pinecones into a 5 gal bucket of shreds.
@midnightblue69Ай бұрын
@@WhatIsTheWheel so will a pair of scissors... ONLY QUICKER THAN THIS VIDEO 🙄
@vicosee44392 ай бұрын
Thank you so much you rock dude
@vicosee44392 ай бұрын
I make my own cuters fairly easy
@jeremyoshea79412 ай бұрын
A lot of channels, see not to use that brass bushing because it’s something that can catch and force the go kart to go forward on its own. I don’t know how much credibility there is to that.
@jeremyoshea79412 ай бұрын
Love you sense of humor!
@jeremyoshea79412 ай бұрын
Thank you for your time…………. A huge difference as well. Are the cheap bills compared to the comet belt. The cheaper belts are gonna leave rubber on the clutch which is gonna screw up the way your belt rides on the clutch. It’s a terrible ride. Spend the extra few bucks and get a good belt from Powersports well worth it and the juggernaut I would advise to get the real juggernaut, huge difference
@lillomourn22382 ай бұрын
Your explanation of how the d shaped ports affect is great I wondered why they were shaped like that.
@greyladder45242 ай бұрын
Can you post a link to those wheel and tires?
@user-sr4yl7gf9yАй бұрын
There vevor on amazon
@richardcranium53933 ай бұрын
We had a fly cutter that held a lathe cutting bit, in shop class. It was awesome with a nice sharp quarter round grind.
@user-gt3xx6lc1o3 ай бұрын
All that $ and effort to use a fuel pump! Why not use stock tank with risers and bigger fittings? I don't think tach is right
@WhatIsTheWheel3 ай бұрын
Some of it was for looks, both to have a clean look on the engine and to use a remote alloy tank. The tach is correct. It inducts the signal from the spark plug wire and is set to read every other signal(the coil fires on scavenge cycle too). I used them on commercial mowing equipment for years.
@user-gt3xx6lc1o3 ай бұрын
Use genuine mikuni needle and seat
@Outcastduffy_3 ай бұрын
Are those vevor wheels. What hubs are those and where are they from?
@WhatIsTheWheel3 ай бұрын
They are Vevor rims and tires. They came as a set from Amazon. I think I got the hubs from OMB warehouse
@2506Larry3 ай бұрын
The diagram of the two heads tells me that the HEMI head utilizes "Impingement Mixing" and the standard utilizes a "Swirl Mixing". I've been recommending "Impingement" for better fuel consumption and better fuel/air mix.
@esuas75623 ай бұрын
Do you know what brand of flexible alan wrench you used? I can’t seem to find the tool online
@georgeprice98823 ай бұрын
What is the ratio from the driver to the drivet
@MotoCurmudgeon3 ай бұрын
Hey Chuck, just wanted to say THANK YOU!!! Your video and instructions were spot on. I just finished the fork kit today and it’s night and day difference. So much better it was crazy. You are the only one that explained how to figure out the two turns in on the emulator PD valve, by starting with no load / pressure on the spring and that’s the zero. Might be obvious but for a newbie it helped to hear that. I also made the tool just as you mention with a 3/4 nut and 1 and 1/16 socket and it worked perfectly. Anyway, I can’t thank you enough, I couldn’t have done this without you. Oh, and I realized after I took the damper rod out that that short spring is already part of the stock damper rod setup. Good fun. Cheers
@WhatIsTheWheel3 ай бұрын
I'm glad I could help you out.
@MotoCurmudgeon3 ай бұрын
Great info, tanks much! Can you provide information on the additional short spring you added to the damping rod? Is that optional? I haven’t seen anyone else mention that. Thanks
@steverollins46904 ай бұрын
Thanks for the great video, just bought a new GT and need to learn this stuff.
@African2muslim4 ай бұрын
So choke in when you start or choke out ?
@WhatIsTheWheel4 ай бұрын
This bike had a choke lever on the bar and you would have it on the "ON" position for a cold start. I have another bike with the knob on the carb and "ON" position is with the knob pulled out.
@davehudson20644 ай бұрын
Great informative video on these panniers. Just finalising the purchase of these for a cb1000r black edition which I think they ll look great on. About £450 complete here in the UK. What a beautiful RE GT you have. Love the colours. Honestly I m not sure they would be my choice for a RE but that’s just subjective. However liked and look forward to seeing more of your content on the RE. Ride safe.
@WhatIsTheWheel4 ай бұрын
I think you will really like them. They don't "fit" the style of the GT but there were not a lot of choices. Motech does make some cases that look like old school fabric panniers but they don't have the capacity of these.
@demondanderson20104 ай бұрын
I can't find those wheels and tires anywhere
@WhatIsTheWheel4 ай бұрын
This is where I got them www.amazon.com/VEVOR-Tires-Wheels-Pattern-Holes/dp/B09GVSD1C8/ref=sr_1_11_sspa?crid=25Z75I5ML32MS&dib=eyJ2IjoiMSJ9.OMclJkzO46hOGJB4CSThwsR09ao5fFrZ-_EwabvF7LN0Guvl3nNAOSh2WrKPIRNumZMtxrnNqRNlbf_uMOsCpnwmug4yE_i7kZ5LXhf4IvssQr2RYboewnv5KdgnrobJ34frtxU5fdkSz6t-mPzIwtEtXzKHAdjzremD2tHzC2U8g-Z_ea3u2idqUDisry9GhkcwsQ9Ln2nJKCk0UyTrClhHsl62QHPqoMJA8edsYJ9RcW2WL3Z51tAcDOXZ4i119SHF_5dT_GHYbs3KqrwmHgiD-8nN0MNWCghIJ5lpVwI.JPkOMF4yVXFrlwk_if65QguyTGWMEih1ydNjjKq_sH0&dib_tag=se&keywords=vevor+go+kart+tires+and+rims&qid=1708820484&sprefix=vevor+go+kart%2Caps%2C116&sr=8-11-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1
@jamesa62724 ай бұрын
I’ve been watching videos where they had 1 and 3 reversed than. I tried the hole to the right and it was weaker than the second. Now I have to try the hole to the left from this video
@kennyh50834 ай бұрын
When the Comet is over $200 and the clone is under $50 I'll just buy a few clones thank you!
@joer50574 ай бұрын
Lol, this. I cut one of mine down since the riser plates won't work with my frame. Slapped it on a 3/4 shaft 196 with a lugnut. Then, I swapped in a 223 and needed the keyed washer and center bolt for the internal threaded shaft, so I just bought a whole new kit, just for those parts. 😅
@jeffreyhill39605 ай бұрын
Why haven’t the aftermarket people caught on , if it’s so great for flow , then just replace the head with a ported one. This could be done in the casting process so as not to have to machine the material out…
@WhatIsTheWheel5 ай бұрын
You can get ported heads from several suppliers. Everything from basic stuff to custom castings and heads that have been welded and the ports completely reshaped. Porting has a long hit rod history. Hotrodding a Predator is a lot like hotrodding an old small block Chevy. There are a bunch of mods to get free or cheap power
@freddysoto70215 ай бұрын
THANK U so much 4 explain i understand much more i will see more videos
@LUNA_is_NIGLIT5 ай бұрын
This is off topic to this video but in the go kart video what size omb hubs should I order for my front vevor tires ? I have the same body frame as you so I just wanted to make sure I do everything right 👍🫡
@WhatIsTheWheel5 ай бұрын
That is a tough question. When I got mine, I ended up cutting them down on the lathe to fit the hub and redrilling them. I know the hub shoulder(the the rim sits on) is 40mm and there are metric hubs in that size. You will need to figure out your axle size and see if you can get a hub that matches the axle size and hub diameter. Video of me making them fit: kzread.info/dash/bejne/q5yi2sOeprLQiKw.html&ab_channel=WhatIsTheWheel
@Michael_22115 ай бұрын
thats very cool
@highwaymen12375 ай бұрын
Very good information!
@user-4klawson5 ай бұрын
Great video sir
@mlindsay5275 ай бұрын
I used a bench vice clamped slightly off center so I could get the snap ring on. Went through a bunch of changes while tuning, got pretty good at it. You can also zip tie the brake and do it on the bike. Seemed to be an almost mute point when I went to the Juggernaut. It just works.
@TACOMASRT56 ай бұрын
I have a predator 212 i want to put on a bicycle. Governor removed. 18lb valve springs 22 carb Should i run a 30 series torque converter with a juggernaut or a 40 series with the 1" adapter?
@mcontreras13406 ай бұрын
Very nice installation and.... VERY WELL BEHAVING PUP YOU GOT THERE🐾❤️
Пікірлер
Your go kart looks so cool!! Am looking for a affordable rear and front axel for a plan
I got most of my parts from OMB warehouse and some stuff from Amazon
I found it easier when it's bolt to the engine.
U talk way too much!!
This is not the first time I have heard that
I see a can of Kroil on that bench, I wish I could still find that stuff locally is phenomenal
It is great. I think I had to order it.
I'm puzzled! EVERYTHING on a Royal Enfield 650 is METRIC..... Why did you just no use a 27mm Metric socket as the factory intended? No need to ruin a perfectly good nut with a sander. 🫣.
It is not a 27mm socket it is a 27mm Hex or Allen. They start around $25 and require 1" drive tools. The tool I made used the nut I ground down in the video and a cracked socket I had in my junk drawer, the cost was less than $2. The socket was trash, but I kept it for a purpose just like this.
what’s the value of it?
Where did you find those tires?
Amazon Look up Vevor Go Kart wheels They come with the rim and tire as pairs(or maybe the set of 4)
Comprimising the pressure chamber of the regulator is a bad idea. I would instead make a mount that used the existing seal/flange bolts and just use longer bolts.
went from a few hundred dollars to well over 2 grand, but i have to say it is fun building these lil engines. its shocking what a lil 212 will do blownout.
What if those weights are different in weight
You started good ,but ur tooling needs replaced,4 different porting work you left a lot to be taken out 4 flow also,i,I, rate it at a 5 on porting,sorry ,guy!!!!!
i put more weight in the front and turns perfect now
Balance is a big deal for sure. If you have a cart where you can move the seat front to back and change that balance, especially on something as light as a cart, You can really make a big difference in how it handles.
Ops I'm sorry you did put it in right the engine was the opposite way so it screw me up sorry about that
Just so u know u put your connecting rod in wrong the dipper should have been facing down
It is facing the correct direction. It has a spoon shape on one side to force oil into the big end and it points in the direction of rotation
I love the style of the Bullit but the wind noise is intolerable.
It is the noisiest helmet I have ever owned
Just got one for $75 to shred waste hay, putting a $175 6.6 hp predator on it
What manufacturer is that frame?
It has Rob Ron stickers on it but I spoke with a guy that has the original jigs and said it was a knock off.
Where are you lifting the car from?
How impressive, its mulches pinecones fed individually 🙄 was there a point to this vid?
The point is engagement, and it worked. It will turn a 30g bin of pinecones into a 5 gal bucket of shreds.
@@WhatIsTheWheel so will a pair of scissors... ONLY QUICKER THAN THIS VIDEO 🙄
Thank you so much you rock dude
I make my own cuters fairly easy
A lot of channels, see not to use that brass bushing because it’s something that can catch and force the go kart to go forward on its own. I don’t know how much credibility there is to that.
Love you sense of humor!
Thank you for your time…………. A huge difference as well. Are the cheap bills compared to the comet belt. The cheaper belts are gonna leave rubber on the clutch which is gonna screw up the way your belt rides on the clutch. It’s a terrible ride. Spend the extra few bucks and get a good belt from Powersports well worth it and the juggernaut I would advise to get the real juggernaut, huge difference
Your explanation of how the d shaped ports affect is great I wondered why they were shaped like that.
Can you post a link to those wheel and tires?
There vevor on amazon
We had a fly cutter that held a lathe cutting bit, in shop class. It was awesome with a nice sharp quarter round grind.
All that $ and effort to use a fuel pump! Why not use stock tank with risers and bigger fittings? I don't think tach is right
Some of it was for looks, both to have a clean look on the engine and to use a remote alloy tank. The tach is correct. It inducts the signal from the spark plug wire and is set to read every other signal(the coil fires on scavenge cycle too). I used them on commercial mowing equipment for years.
Use genuine mikuni needle and seat
Are those vevor wheels. What hubs are those and where are they from?
They are Vevor rims and tires. They came as a set from Amazon. I think I got the hubs from OMB warehouse
The diagram of the two heads tells me that the HEMI head utilizes "Impingement Mixing" and the standard utilizes a "Swirl Mixing". I've been recommending "Impingement" for better fuel consumption and better fuel/air mix.
Do you know what brand of flexible alan wrench you used? I can’t seem to find the tool online
What is the ratio from the driver to the drivet
Hey Chuck, just wanted to say THANK YOU!!! Your video and instructions were spot on. I just finished the fork kit today and it’s night and day difference. So much better it was crazy. You are the only one that explained how to figure out the two turns in on the emulator PD valve, by starting with no load / pressure on the spring and that’s the zero. Might be obvious but for a newbie it helped to hear that. I also made the tool just as you mention with a 3/4 nut and 1 and 1/16 socket and it worked perfectly. Anyway, I can’t thank you enough, I couldn’t have done this without you. Oh, and I realized after I took the damper rod out that that short spring is already part of the stock damper rod setup. Good fun. Cheers
I'm glad I could help you out.
Great info, tanks much! Can you provide information on the additional short spring you added to the damping rod? Is that optional? I haven’t seen anyone else mention that. Thanks
Thanks for the great video, just bought a new GT and need to learn this stuff.
So choke in when you start or choke out ?
This bike had a choke lever on the bar and you would have it on the "ON" position for a cold start. I have another bike with the knob on the carb and "ON" position is with the knob pulled out.
Great informative video on these panniers. Just finalising the purchase of these for a cb1000r black edition which I think they ll look great on. About £450 complete here in the UK. What a beautiful RE GT you have. Love the colours. Honestly I m not sure they would be my choice for a RE but that’s just subjective. However liked and look forward to seeing more of your content on the RE. Ride safe.
I think you will really like them. They don't "fit" the style of the GT but there were not a lot of choices. Motech does make some cases that look like old school fabric panniers but they don't have the capacity of these.
I can't find those wheels and tires anywhere
This is where I got them www.amazon.com/VEVOR-Tires-Wheels-Pattern-Holes/dp/B09GVSD1C8/ref=sr_1_11_sspa?crid=25Z75I5ML32MS&dib=eyJ2IjoiMSJ9.OMclJkzO46hOGJB4CSThwsR09ao5fFrZ-_EwabvF7LN0Guvl3nNAOSh2WrKPIRNumZMtxrnNqRNlbf_uMOsCpnwmug4yE_i7kZ5LXhf4IvssQr2RYboewnv5KdgnrobJ34frtxU5fdkSz6t-mPzIwtEtXzKHAdjzremD2tHzC2U8g-Z_ea3u2idqUDisry9GhkcwsQ9Ln2nJKCk0UyTrClhHsl62QHPqoMJA8edsYJ9RcW2WL3Z51tAcDOXZ4i119SHF_5dT_GHYbs3KqrwmHgiD-8nN0MNWCghIJ5lpVwI.JPkOMF4yVXFrlwk_if65QguyTGWMEih1ydNjjKq_sH0&dib_tag=se&keywords=vevor+go+kart+tires+and+rims&qid=1708820484&sprefix=vevor+go+kart%2Caps%2C116&sr=8-11-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9tdGY&psc=1
I’ve been watching videos where they had 1 and 3 reversed than. I tried the hole to the right and it was weaker than the second. Now I have to try the hole to the left from this video
When the Comet is over $200 and the clone is under $50 I'll just buy a few clones thank you!
Lol, this. I cut one of mine down since the riser plates won't work with my frame. Slapped it on a 3/4 shaft 196 with a lugnut. Then, I swapped in a 223 and needed the keyed washer and center bolt for the internal threaded shaft, so I just bought a whole new kit, just for those parts. 😅
Why haven’t the aftermarket people caught on , if it’s so great for flow , then just replace the head with a ported one. This could be done in the casting process so as not to have to machine the material out…
You can get ported heads from several suppliers. Everything from basic stuff to custom castings and heads that have been welded and the ports completely reshaped. Porting has a long hit rod history. Hotrodding a Predator is a lot like hotrodding an old small block Chevy. There are a bunch of mods to get free or cheap power
THANK U so much 4 explain i understand much more i will see more videos
This is off topic to this video but in the go kart video what size omb hubs should I order for my front vevor tires ? I have the same body frame as you so I just wanted to make sure I do everything right 👍🫡
That is a tough question. When I got mine, I ended up cutting them down on the lathe to fit the hub and redrilling them. I know the hub shoulder(the the rim sits on) is 40mm and there are metric hubs in that size. You will need to figure out your axle size and see if you can get a hub that matches the axle size and hub diameter. Video of me making them fit: kzread.info/dash/bejne/q5yi2sOeprLQiKw.html&ab_channel=WhatIsTheWheel
thats very cool
Very good information!
Great video sir
I used a bench vice clamped slightly off center so I could get the snap ring on. Went through a bunch of changes while tuning, got pretty good at it. You can also zip tie the brake and do it on the bike. Seemed to be an almost mute point when I went to the Juggernaut. It just works.
I have a predator 212 i want to put on a bicycle. Governor removed. 18lb valve springs 22 carb Should i run a 30 series torque converter with a juggernaut or a 40 series with the 1" adapter?
Very nice installation and.... VERY WELL BEHAVING PUP YOU GOT THERE🐾❤️
Thanks, she's a good girl