Here at RespShop.com, we are dedicated to spreading knowledge about Respiratory Care! We carry CPAPs, Oxygen Concentrators, Nebulizers, and more at www.respshop.com/
Contact Us today to Find the Products that Work Best For Your Therapy!
Website: bit.ly/3gvtt65
Phone: 1 (866) 936-3754
Facebook: facebook.com/RespShop/
Twitter: twitter.com/RespShop
Instagram: instagram.com/respshop/
Пікірлер
I have the new 11 and love it. No one has prompted with any questions or instructions ….hmmm
Glad you're enjoying your new AirSense 11! If you've opted in to the Care Check-in feature when setting up the machine, it'll check in with you over a one month period to see how therapy is going.
I ordered one of these and a new mask and they arrived just before I went on a trip. The Transcend Micro machine seemed quiet to me, but the noise coming from my mask woke me up several times a night. When I got home, I used my new mask with my Resmed Airsense 10 and there was zero noise. I have a whispersoft muffler, but the one I have looks to be about half the size of the one shown in the video.
Hi, most likely you have the updated whispersoft muffler which is 40% smaller than the original (the one shown in our video).
awesome, thanks!
Hi! I've just used minicpap software to set my brand new Transcend Micro to my therapy pressure (12). However, the dashboard app still reads the initial setting (4). I've power cycled the Transcend Micro and force stopped the dashboard app but it still reads 4, not 12. I _think_ the pressure that I'm feeling is in fact 12. (Will only know when I try to sleep with it, shortly.) The dashboard app _seems_ to be connecting to the device to read it - at least, there is a pause when going to the settings panel. Is there a way to force it to reread from the device, is this a known issue with the dashboard app, or? (I should say I connected the dashboard app _first_ before using the minicpap app to change the settings.) Thanks!
Hi, we suggest reaching out to Transcend customer service through the app's troubleshooting section. If that doesn't work, here's contact information for Transcend: mytranscend.com/contact-us/
I’m not diagnosed with anything but I’m honestly scared to fall asleep. Every so often I will stay up all night because every time I drift off I wake up gasping for air. Normally this wouldn’t be a problem but last night really scared me. I was having these episodes of forgetting to breath for some reason, yet I could tell they were for less than 30 seconds. But there was this one that seemed like it lasted longer than a minute before my entire body jolted awake because something fell off my shelf. I know my body would have woken me up because I wasn’t breathing, but what if it didn’t and I just laid there not breathing? I’m only 14 years old and I know I probably have nothing to worry about but I’m honestly so scared to fall asleep now
Sorry to hear you're going through this! This doesn't sound like sleep apnea but definitely something you should get a doctor's opinion on.
When I started CPAP - this would be nearly 20yrs ago at this point - I had severe problems with this exact issue - couldn't keep my mouth closed. Pressure (then) was 15. Chin strap was horribly uncomfortable. Damn inconvenient. Hated it. BUT! I stuck with it because I really needed the better sleep. Until one night about 6months after starting I forgot to put the chin strap on - and my mouth stayed shut! And has stayed shut since then without ever needing the chin strap again! No leaks whatsoever. Apparently sometime during the 6months my brain, during sleep, had someone managed to learn to keep my mouth shut! This is just one person's experience - ME! - but it's true, and maybe the same will happen for you. Don't give up; you need the better sleep. Maybe other people will chime in with their experience: Have they also learned, in their sleep, to keep their mouth shut?
Thank you for sharing your experience! It is very true - you can train yourself to only breathe through your mouth. A lot of people are skeptical and many people who try don't stick with it so they say it isn't possible.
Thank you.
Thank you very much for your thorough review
It is true. We are what we eat. Dr's are taught to push pills, not fix the problem. These problems can be corrected in one day by eliminating the following 5 poisons from our diet. All vegetable seed oils, White rice, White flour, Refined salt, All sugars, There is no difference between sugar and cyanide to the mitochondria, The only oils we have the enzymes to brake down to carbon dioxide and ATP are animal fats, all processed foods are unrecognizable to the body, they are stopped by the liver. Causing fatty liver disease.
Thank you for watching!
But lower EPAP gives me a lot of more CAs, even when PS is 2.
Thank you for watching! Unfortunately, in this case then it's not a good idea to use EPR.
Too loose and they leak and make noose
Sorry to hear that! Usually sizing up with the nasal pillows will give you a better seal.
@@RespShop large dont feel like they seal, med fit well but irritate inside of nose. hard to find the sweet spot
I have this machine... I love it.. I don't even think of sleeping without it.
I just got it today. Trying to figure out if im small or medium
What is the power outlet used for? Can it charge a phone?
The power outlet is for charging the AirMini.
@@RespShop so why do they call it an outlet then?
okey
Thank you for watching!
Great video! So helpful since Aeroflow never answers!
Thank you!
The airsense 10 does work with myair :)
Handy i thought warm up was 15 minutes before, il do half hour :)
Or boil water and let it sit 😎
These mosks drive me crazy.
CPAP masks can be hard to get used! Have you tried something a little more minimalistic like the BLEEP Eclipse no-headgear CPAP mask? Aside from two sticky pads around your nostrils, there's nothing else on your face.
Can i place my heated hose inside?
Yes, you can put your heated hose inside although the UV light can't penetrate inside the hose so it won't be able to sanitize the inside.
I am having a hard time finding a way to purchase this mask with nasal pillows and not the cousin
Fisher & Paykel hasn't officially released the Solo nasal pillows yet. Last we heard it should be coming out soon.
@@RespShop oh ok, thanks for the quick response. I had seen other content creators with them, so I had believed they were released already
I received my order of the F40 I haven't used it yet.
If you can share with us (and everyone here) what you think about the F40, that'd be great!
That's for your time and showing how to set the pressure
Sir pls cpap pressar setting
Hi, the video explains how you can check your pressure setting and adjust it. If you're trying to figure out what pressure you should be on, that's something you'll need to talk to your doctor about. Hope this answers your question.
Thank You!!!
Is the climate hose for 10 usable for the 11. I getting a new machine the 11 and still have 10 climate hose for 10 haven't used yet
The Climateline hose for the AirSense 10 isn't compatible with the AirSense 11 unfortunately.
I am using it now - and I find it leaks a lot over the time I sleep,...makes sounds...I have to do a "Mask Fit" a couple of times during the night. Is this normal? I have to make the straps pretty tight - is this common w this mask? thanks
You shouldn't have to overtighten the straps for the mask to seal. Have you tried a different cushion size or a smaller headgear? The headgear comes in small, standard and large. Here's a F40 leak adjustment video from ResMed that might help: kzread.info/dash/bejne/l46qsahwh7iqebw.htmlsi=224_rs0wENn_EESS
Thank you for explanation
I wish in England we would have a info channel like respsho
We're glad you found us informative 😊and thank you for watching. We release new videos every Friday so make sure to stay tuned!
I get a “Forbidden” message : “You do not have access to this site” when I attempt to download OSCAR as instructed. Am using ASUS laptop, Windows. Any suggestions? Thanks
Have you tried reaching out to the developers of OSCAR at www.apneaboard.com? There's an old post from a cpap forum where someone from Taiwan encountered the same problem. www.cpaptalk.com/viewtopic/t179061/OSCAR-v110-is-now-Released.html?start=15
Good review, but the background music is too loud and distracting.
Thank you for your feedback!
The worst design ever for the hose attachment. It does not swivel and comes off many times throughout the night. Getting awaken by hissing air is worse than Sleep Apnea.
Have you tried the ResMed AirFit F40? It's also a minimal contact full face mask but this one swivels.
That's great, thanks for responding to me. I do find your videos very helpful and educational.
Thank you! Glad you found us helpful!
You made a comment about a person with a “Pace Maker”. Since I use the F30, I did not see any disadvantage in using the F40 as they appear to connect in basically the same place/area. Should a person with a pace maker be concerned more with the F40 over the F30. Not sure if my CPAP doc would be the best person to answer a concern on the change. I will probably ask my heart doc about the change. Thanks.
Yes, please do consult with your cardiologist. As far as we know, the magnet strength is the same for the F30 and F40.
Do you think that you could turn down the back ground music a notch or two so we can hear what you are saying or maybe you could just start screaming over the loudness of the music.
Sorry about the volume of the background music. We'll keep this in mind when making our next video.
I tried the F40 because I liked the idea of the soft mask feature. I used it for several nights but had to revert to my F&P Amara View. My experience (and data readout) showed that I could not get a good seal and had many leaks. I am bearded, and that may have caused some issues. Other pertinent details: I have been on CPAP therapy for a year and a half. I use a ResMed AirCurve 10 and a heated supply tube. I also find that a chinstrap helps with mouth leaks. I'm a side sleeper and find both masks work when on my side.
Thank you for sharing your experience with the F40!
Very good run down. Thank you
I was recently diagnosed with central sleep apnea from dysautonomia. Also have sinus tachycardia and recently chf. Sucks bc I'm only 47. I've already lost a lot of my vision from chronic optic neuropathy for whatever reason. I was active and healthy 2.5 years ago and now I'm in horrible health. I don't get it and I hate it.
I'm so sorry to hear about everything you're going through. That must be incredibly frustrating and scary! 😔
My Dr. Left the area and I struggle with change. That's an understatement. And so I've just been dealing with low pressure for years. Im so grateful for the video.
Thank you! We're glad we could help, if just a little!
I just got the transcend micro, but I have noticed the air of my resmed AirSense 11 machine is comes out so much more powerful and strong compare to the transcend micro machine and I couldn't find a was to make it stronger.
Are your settings on the Micro are exactly the same as your settings on the AirSense 11? Is Ramp on? It's normal for there to be a difference between machines from different manufacturers because they use different algorithms. So there will always be a bit of a difference unless you stick to the same brand.
Is cpap the best treatment for central sleep apnea?
CPAP can be the first line of treatment for central sleep apnea and if that doesn't fix the issue then doctors usually prescribed BiPAP therapy instead. There are many different reasons why central apneas may occur and depending on the cause of the central apneas, different types of BiPAP therapies will be prescribed.
I love it. It’s a big improvement.
with respect to two sizes of tubes - I assume 12mm (and 19mm) with standard 22m ends so I can use leftover tubes from my late lamented Dreamstation Go? In fact, the pictures I've seen show that the "Micro Air Flex Hose" has a kind of twist-to-engage end for the device end - perhaps you can ONLY use their hose on the thing beause of that connector?
Yes, the Micro Air Flex Hose has a special end connection that's designed to only work with the Micro. Previously you could use any standard hose with the Micro as long as you have the muffler attached. The muffler came with a short tube that connects to the Micro. On the other end of the muffler, you can attach your standard hose. However a few months ago Transcend updated their muffler design, reducing its size by 40% and getting rid of that short tube connection. It makes the muffler setup a lot less clunky but it also made it so you can no longer attach a standard hose to the muffler. You have to use the AirFlex hose with the muffler as well. Hope this answers your questions!
I have it and was told to mark it as pillows but the problem is I have it on automatic start and it does not work. I have to manually start it. Do you have a solution?
Have you tried taking a few forceful breaths in and out to try to trigger the sensor?
I can confirm that going aftermarket does reduce the overall sound output. However, the standard tubes are bulky and don't do well when repacked every day. The HME filters last ~5 days, and the weight from the HMR can make the weight of the tubing an issue. Definitely the way to go if you use a mask that is not compatible with the AirMini with the ResMed tubing.
Facts
Thanks for the info but the biggest problem is that the heating element keeps dying. I’ve had several I’ve had to turn in. Take my advice. Keep your Airsense 10. I’ve had 10 times more problems with the 11.
Thanks for watching! Sorry to hear you've run into so many issues with the AirSense 11.
Yes, this interface does rest on your top lip more than a mask. But I guess a trade-off then straps along the side of your face and having to keep adjusting a headgear.
Unfortunately my first night with this system had a leak failure on one side that started small and while I tried to add more tape still was chasing the leak. So I was waking up adjusting trying to press down the tape which would hold for short. Until I woke up again with it leaking total of 29 l per hour But figure that probably after 5 hours was when it started leaking in my sleep more before I woke up to find it. I know the first hour it said zero leaks but I felt the small one starting at that point. Since it was only one side I'm going to assume user error or some other issue with that Halo placement. Since the foam pad is a little less flexible than I would like, I think when the face moves it could loosen if not perfectly applied. I also felt cool air or a wetness on that side. So I'm thinking that once the humid air from the machine found a small pathway, it just kept widening and moistening which probably wasn't helping it re-stick down.