Пікірлер

• 
  @carbonnater7 күн бұрын

  Wondering what’s your clearance from the top of the pull stud to the bottom of the gantry? Looking at getting the MR1 and SMW plate and something similar to this build.

• 
  @airgunningyup7 күн бұрын

  its lapse , no laps

• 
  @KamalSingh-ny9vw27 күн бұрын

  can you make a video on the old mr1 spindle and disassemble it and shows us what precision bearing they are using ?

• 
  @popbandolАй бұрын

  Its awesome, the only issue i see for now is the chips getting on the tool holders. Im sure you thought about it though. What are you planning to build to protect it ? Also what controller did you go with?

• 
  @KeepCalmSoldierOn2 ай бұрын

  Did you replace the spindle to do this or?

• 
  @shawnwebb52612 ай бұрын

  It's been a while since this video was posted. How is the MR-1 holding up? Can it cut stainless steel?

• 
  @rosshall80672 ай бұрын

  Please please please make a full length tutorial on how to set up the auto tool changer and 4th axis, this is so sick.

• 
  @quinlannascustoms2 ай бұрын

  Whattt?? Bro I want to buy an MR-1 so bad but when I called them they said they weren’t going to be focusing on making the 4th axis part right now. Which 4th axis were you able to adapt to the MR-1 if you don’t mind asking?

• 
  @ryanwykes2 ай бұрын

  some amazon part. the MR-1 is a great kit from the start and is easily upgradable. there's a community of people modding them and making them incredibly capable machines. The 4th axis really steps the game up.

• 
  @quinlannascustoms2 ай бұрын

  @@ryanwykes Awesome man! Yeah it looks like a very capable machine from everything that I have seen. Simply because I absolutely need a 4th axis rotary for the things I am looking to make I’m almost leaning towards the tormach 770m but after seeing this. Langmuir is definitely back in my view

• 
  @edyg75862 ай бұрын

  Watch

• 
  @Dan-ry7ql2 ай бұрын

  Thats cool as bro im trying to slap a basic gbrl code into my old i3 haha😅 dremel bolted on currently... Have a castle motor buuuuuuuuut ....it costs more then my printer did or a cheap mill 😅 might just buy one

• 
  @ryanwykes2 ай бұрын

  do it, these things rock

• 
  @Dan-ry7ql2 ай бұрын

  @@ryanwykes good enough for me I'm on to it haha cheers for the feedback 😀👍

• 
  @TheProfesionalGamerGGN3 ай бұрын

  Soooooo every op .....WE NEED TO PROGRAM AND CHANGE TOOL?????

• 
  @ryanwykes3 ай бұрын

  Yeah. thats how the stock system is. that is why I changed out the controls and spindle. now I have a 24K RPM unit with ATC running UCCNC. Others have done Linux. base machine is great, and the software is simple. but running tool after tool, program after program gets old fast.

• 
  @dannysanchez62483 ай бұрын

  do you have the tool setter riser file ?

• 
  @ryanwykes3 ай бұрын

  its on the FB Forum. facebook.com/groups/870787690305007/permalink/1211095736274199

• 
  @jaykanyi3 ай бұрын

  More videos on your mr1 machine

• 
  @ryanwykes3 ай бұрын

  I want to! work has gotten me busy lately.

• 
  @ryandeweese3633 ай бұрын

  Found this system the other day and deff seeing the potential to pay for itself and then some!! I'd like to see how ppl are utilizing this rig!

• 
  @ccfirearms4 ай бұрын

  Have you found anything you do not like so far about it?

• 
  @danbirch89395 ай бұрын

  Nice! Does it do well with engraving fine lettering into aluminum?

• 
  @ryanwykes3 ай бұрын

  Yes it does! depends on what endmill you select.

• 
  @snowfarmer695 ай бұрын

  Probably a stupid question but can the stock mr1 electronics run this spindle?

• 
  @ryanwykes3 ай бұрын

  I wouldn't suggest it.

• 
  @rodan28525 ай бұрын

  Compared to the ww2 era bridgeport that was in my H.S machine shop back in the late 2000's, this thing is a space ship. A real revolution for the independent free thinking inventor, or for looney-tunes like me 😁

• 
  @jojolebleu93645 ай бұрын

  How does it end?!!!!!

• 
  @BecksArmory5 ай бұрын

  I just purchased an MR-1 I'm worried about breaking tiny tools like the one you're using. I'm happy to see it's possible to run them effectively. :)

• 
  @sethsidden5 ай бұрын

  Bad hits. Probe isnt supposed to bend or warp just touch. Speed and feeds too high

• 
  @bdkj3e5 ай бұрын

  What is this for?

• 
  @ryanwykes5 ай бұрын

  A Sugar company lab test stand- back when I had no idea what I was doing. This was one of my first projects that mounted to a Bruker sample probe.

• 
  @jmldennis6 ай бұрын

  How is the accuracy on the MR-1. I've seen several comments in the forums that a gantry style CNC can't hold tight tolerances, but no real reports on these machines. What are the real world tolerances you can expect on aluminum and steel?

• 
  @ryanwykes5 ай бұрын

  Accuracy is relative, especially when it comes to hobby machines. but ill say this, I can consistently dial in a part and hit the same size with really good results. .001 seemingly all day long

• 
  @rbdesignsnh6 ай бұрын

  the only thing I wish Langmuir offered was a spindle upgrade with tool holders, rather than collets. My nomad has collets and if was to spend the money on the MR-1 i would love to be able to just setup tool offsets once with holders rather than having to probe tool height every time i change a tool like i do now.

• 
  @tg55096 ай бұрын

  Everyone talking about feeds. You need a dial indicator and skill, tf is that.

• 
  @Sharedbook6 ай бұрын

  This is awesome!!!

• 
  @balajisangulage86176 ай бұрын

  Probe price?

• 
  @DizzyWood_shop6 ай бұрын

  Hello. Have u seen some markings on the vises or do u know the brand or manufacturer of them?I live in Europe I can't buy from langmuir directly the shipping costs and import taxes are 2x the price of a vise. Any help is appreciated thanks :) keep making them chips!!

• 
  @ryanwykes6 ай бұрын

  www.alibaba.com/product-detail/Modular-Vise-High-Quality-Modular-Vise_1600284749436.html?spm=a2700.galleryofferlist.p_offer.d_price.519245d3XMpcsA&s=p

• 
  @ortegasculpture6 ай бұрын

  how do you think a 5.5 kw version of the spindle would do on steel? im getting ready to change out my controls to a masso system but seeing this make me think about changing the spindle lol

• 
  @ryanwykes6 ай бұрын

  Do it and send the results. probably work great.

• 
  @ortegasculpture4 ай бұрын

  @@ryanwykes im sending it lol i just ordered a 8kw 12000 6 pole version and gonna install in the next few weeks

• 
  @timmontano87926 ай бұрын

  Before retiring I owned and used a Tormach 770 for some of my custom jobs. After retiring I sold it thinking I wouldn't have much use for it anymore. Boy, was I wrong. Now I'm looking to buy a CNC mill with a slightly smaller footprint. These MR-1s look like they might fit my needs now. My CNC mill had all of the bells and whistles including a 4th axis but, II never had an automatic tool changer on my Tormach. To speed up all my tool changes I'd preset all of my tools in their respective holders to the exact same height. This way I didn't have to go through the hassle of changing tools and then re-indicating them with the top of my part. Do you pre-set the stick-out of your cutters in the same way? I ask because none of your tool changes used the automatic tool height gauge you have mounted on your mill.

• 
  @ryanwykes6 ай бұрын

  Each tool has a known height in relation to a “master tool”. I have a G31 macro written so whenever I call for A tool I can also include G31 and it will auto measure the tool and save the offset

• 
  @imiafamily6 ай бұрын

  И придурка нисколько не смутило то, что измеренная так деталь существенно меньше, чем на самом деле?)))

• 
  @leokinggg49026 ай бұрын

  So was nehmtman rewnishaw taster

• 
  @jacobmiller66646 ай бұрын

  Awesome work. I wish LS would update cut control and fix the bugs. Im inching closer and closer to what youve done. My only issue with your setup for me would be the high speed spindle. i cut steel frequently, and i like the torquey low speed of the stock spindle. I love seeing your updates!

• 
  @ryanwykes6 ай бұрын

  I updated the controller first. Very simple process and allows so much more capability to the machine. If you do, make sure you don't ruin backwards compatibility if you don't know what you are doing.

• 
  @theflamecoreguy79296 ай бұрын

  Sounds ❤

• 
  @HuskyMachining6 ай бұрын

  Awesome! I so want to add a ATC to my MR1. What brand spindle did you get?

• 
  @ryanwykes6 ай бұрын

  search Ebay for ISO20 ATC Spindle.

• 
  @HuskyMachining6 ай бұрын

  @@ryanwykes I was curious if you went ebay or aliexpress

• 
  @ThumbDr6 ай бұрын

  But… those tapers would get absolutely covered in chips and gunk making this basically unusable?

• 
  @ryanwykes6 ай бұрын

  That is precisely why I am asking for ideas as my notes say in this video.

• 
  @ThumbDr6 ай бұрын

  @@ryanwykes my idea would Be to add a servo and a Gcode to have the tools covered completely when not in toolchange with a simple plastic cover, on toolchange open the shroud/cover, then if you have plain air on the spindle run a small radius around the tool with air and if not then just run a small radius of flood coolant around the tool to at least blast the chips off with coolant and then that way you shouldn’t have any wear on the taper surface finish and no chips stopping it from mating properly. Probably needs some trial and error I’m sure there a lot of problems that would arise that I’m not thinking of

• 
  @azurehydra6 ай бұрын

  SEXXY

• 
  @ryanwykes6 ай бұрын

  😁

• 
  @250smacks6 ай бұрын

  You beautiful genius, I’m saving money for a mr1 and watch every video I can find

• 
  @ryanwykes6 ай бұрын

  Unfortunately it seems like a mixed bag with delivery- not sure if user error plays into it at all. Mine was SN#1 so I had a few things that weren’t great but LS knocked those out pretty easy. Modding this thing has been a blast. Such a capable machine out of the box and only gets better and better

• 
  @250smacks6 ай бұрын

  Money well spent? Is it a hobbyist machine like some say or could you potentially run a business with it?

• 
  @ryanwykes6 ай бұрын

  The upgrades I have done have improved its reliability. As a stock unit you would run into frustration so quickly with its bugs and ghosts. LS will address these eventually but I didn’t want to wait.

• 
  @airgunningyup6 ай бұрын

  hopefully langmuir runs with a similar idea

• 
  @ryanwykes6 ай бұрын

  I am hopeful that Langmuir keeps doing what they are doing with their innovation and makes their mills even better and better.

• 
  @rshotty90396 ай бұрын

  it would be nice but instead they put their efforts to a 2ft wide useless CNC brake but whatever.

• 
  @bdkj3e6 ай бұрын

  Phenomenal work, do you lose much Z axis work height with this setup?

• 
  @ryanwykes6 ай бұрын

  None. I machined a back plate to match the original spindle height.

• 
  @speppino6 ай бұрын

  How will you prevent chips from covering the tool holders?

• 
  @ryanwykes6 ай бұрын

  @@speppinoI’ll have to 3D print a cover that either works with the M6 code or moves when the spindle gets close.

• 
  @Rajkumar_Chakre6 ай бұрын

  Cmm machine

• 
  @alexanderzawydiwski95346 ай бұрын

  I’m not sure the probe is supposed to bend like that

• 
  @gunlover926 ай бұрын

  Thats a terrible probing routine. No body should follow this advice or whatever u call this

• 
  @CanDuNietteR6 ай бұрын

  Nothing to see here

• 
  @SpeedNessRx76 ай бұрын

  Is the spindle upgrade necessary when upgrading to UCCNC or can the stock spindle be used as well?

• 
  @FluffRat6 ай бұрын

  Weird probe cycle. I can understand doing 2 macro calls for X center and Y center if you couldn't be bothered to do the trig on a 3 point circle measurement, but what are the first two touches at rapid feed for?

• 
  @ryanwykes6 ай бұрын

  the first 2 give the second probe on the X Axis a more accurate location. its a stock probing macro from UCCNC.

• 
  @Ry_Guy6 ай бұрын

  The probe doesn't need to check the Y axis a second time when locating a boss or bore, it'll adjust based off of the X axis measurement

• 
  @jumpman26806 ай бұрын

  That’s perfectly fine if your tolerance is .050”😂

• 
  @jacobmiller66646 ай бұрын

  I know you got your machine around the time i did, but i havent been on the forums much since ive had it up and running, but do you still use the touch probe from LS? Mine sucks, it seems. Its never been able to stay under 5 thou unless i spend 30 minutes getting it perfect and then use it. faster to just use an edge finder.

• 
  @ryanwykes6 ай бұрын

  with the LS Controller that's what you can expect. the new controller holds much greater tolerances because of the communication rate.

• 
  @jacobmiller66646 ай бұрын

  Ive been thinking about a different spindle. Looks like youve already done it, did you do a full electronics swap?

• 
  @ryanwykes6 ай бұрын

  Yes. UCCNC Controls, 300ETH controller with a C94 BOB. also swapped to servos. this machine is now a beast. not sure I recommend a different spindle yet. theirs has torque for days, but its nice to have quick change tools and 24k RPM