1.5 MRR in Aluminum. 2 flute variable pitch .25" endmill.
Жүктеу.....
Пікірлер: 45
@t.h210 Жыл бұрын
Glad to see these machines are working good and producing nice parts. Great work!
@HuskyMachining Жыл бұрын
Damn your getting me excited for when my machine comes! great looking part btw
@1320freek Жыл бұрын
Nice!!! Just poured my concrete! Can’t wait to start making parts with mine.
@julianwatts9024 Жыл бұрын
So pumped about to pour the concrete. Can’t wait to see what it can do. Hope they come out with the 4th axis sooner rather than later.
@chutzpah3921
Жыл бұрын
You are so lucky! Mine got pushed back until the end of January! It is killing me 🤣
@mikejuzenas93 Жыл бұрын
Wow, that looked like fun! Mine is shipped, now waiting ... 🙂
@josefcogonzalez1902 Жыл бұрын
Congratulations great job
@jacobfalk4827 Жыл бұрын
I'm about to pour concrete. Can't wait! Thanks for the motivation
@ryanwykes
Жыл бұрын
You got this!
@jacobfalk4827
Жыл бұрын
@@ryanwykes stayed up until 4:45 Now it’s ready for concrete but I need a buddy.
@dts_user1389
Жыл бұрын
@@ryanwykes Any tips or challenges you ran into?
@mystamo Жыл бұрын
Ready for your next video.. I ended up pulling out of the MR1 campaign. Just wouldn't get me a dang machine to Canada on time.
@desertTooHot Жыл бұрын
ooo that is nice
@brettkerr2034 Жыл бұрын
Sweet!
@T0tenkampf Жыл бұрын
I have seen other videos showing the probe making a faster coarse bump and then a slower one, do you not think that process has value? I want a Plasma XR and this MR-1 so badly that I may just apply for a job in Conroe lol
@MoralRichMedia Жыл бұрын
Question, did you have to cut the rectangular part off with another saw before you did the second operation? Just curious as to how you clean up the back side of the part.
@ryanwykes
Жыл бұрын
Yeah gotta cut op 1 with a bit deeper depth than normal, cut the part off with a bandsaw from the remaining stock, face it down to size then reindex position with the probe.
@MoralRichMedia
Жыл бұрын
@@ryanwykes Thank you...good info.
@rcadtechnologies1573 Жыл бұрын
Machine looks like a lot of fun. I was just looking at your part a bit closer and at 3:07 I saw the chamfer on the holes and edges was off. Was that on purpose or did something go awry? Thanks
@ryanwykes
Жыл бұрын
good eye! Op.1 was indexed off a corner and op. 2 was indexed from a center hole with the langmuir probe that was un-tuned.
@rescobar8572 Жыл бұрын
Great video! How is the CAM software? What did you use before the MR1's software?
@ryanwykes
Жыл бұрын
Hey. The cam software generates the GCode for you. It plots out the tool path. I have always used Fusion 360 but there are others that also work. the software of MR1 is "Cut Control" and it is proprietary software specific to the MR-1. Langmuir does not have cam software, but they play along with multiple different software programs.
@airgunningyup Жыл бұрын
hows the probing routine , is it easy to figure out ?
@ryanwykes
Жыл бұрын
quite! it only has the basics for now, home off X, Y, Z, all 3, bore, boss, hoping they will come out with more routines soon.
@jojolebleu93645 ай бұрын
How does it end?!!!!!
@darkshadowsx5949 Жыл бұрын
it looks really bothersome to clean without a slanted base and chip auger. might have to pause to clean on big projects. but it looks like it does a fine job.
@joell439 Жыл бұрын
👍👍👍👍👍👍👍👍👍👍
@brandonthompson5795 Жыл бұрын
Nice part and those chips had me memorized... lol us nerdy machine guys find that shizzz to be hypnotic. Do they have you mix a cutting oil base or is that just water? hoping soon i can get one of these bad boys.
@ryanwykes
Жыл бұрын
it's amazing how the machine sounds when it's cutting. the cutting fluid is a mixture of synthetic coolant and tap water.
@fancyfistfight40329 ай бұрын
Do you do work for hire? I'm needing some small pieces milled and this machine looks ideal for the job.
@ryanwykes
5 ай бұрын
sorry for being late to reply. upload your parts to Xometry- they will connect you with someone who can make what you need.
@DR.ELEKTRIK Жыл бұрын
It's pretty good for $4,000!
@DizzyWood_shop6 ай бұрын
Hello. Have u seen some markings on the vises or do u know the brand or manufacturer of them?I live in Europe I can't buy from langmuir directly the shipping costs and import taxes are 2x the price of a vise. Any help is appreciated thanks :) keep making them chips!!
Nice watching these videos isnt making the wait any easier lol are you using the free version fusion thanks
@ryanwykes
Жыл бұрын
I went ahead and got the paid version. It was worth it to me for time savings on certain things.
@mystamo
Жыл бұрын
@@ryanwykes The wait is killing me.. When I get mine I think I might buy fusion on a sub also.. Great Video!
@727jetjumper Жыл бұрын
how is the accuracy on these things?
@ryanwykes
Жыл бұрын
I am hitting tenths on steel with a single finishing pass. quite accurate!
@Akatora112 Жыл бұрын
What type of coolant are you using? It looks like water.
@ryanwykes
Жыл бұрын
EF-130 from TAZ Industrial Fluids in Conroe. 10 out of 10. Blaser would not reply to me so I went Local.
@T0tenkampf
Жыл бұрын
@@ryanwykes good to know, I am in Porter myself
@hoppercar Жыл бұрын
Where are they made?....chinesium ???
@ryanwykes
Жыл бұрын
I think all individual parts are made in Asia(china), assembled in TX and the finally built in your garage... I have not seen any "chinesium" on this machine like my grizzly equipment
Пікірлер: 45
Glad to see these machines are working good and producing nice parts. Great work!
Damn your getting me excited for when my machine comes! great looking part btw
Nice!!! Just poured my concrete! Can’t wait to start making parts with mine.
So pumped about to pour the concrete. Can’t wait to see what it can do. Hope they come out with the 4th axis sooner rather than later.
@chutzpah3921
Жыл бұрын
You are so lucky! Mine got pushed back until the end of January! It is killing me 🤣
Wow, that looked like fun! Mine is shipped, now waiting ... 🙂
Congratulations great job
I'm about to pour concrete. Can't wait! Thanks for the motivation
@ryanwykes
Жыл бұрын
You got this!
@jacobfalk4827
Жыл бұрын
@@ryanwykes stayed up until 4:45 Now it’s ready for concrete but I need a buddy.
@dts_user1389
Жыл бұрын
@@ryanwykes Any tips or challenges you ran into?
Ready for your next video.. I ended up pulling out of the MR1 campaign. Just wouldn't get me a dang machine to Canada on time.
ooo that is nice
Sweet!
I have seen other videos showing the probe making a faster coarse bump and then a slower one, do you not think that process has value? I want a Plasma XR and this MR-1 so badly that I may just apply for a job in Conroe lol
Question, did you have to cut the rectangular part off with another saw before you did the second operation? Just curious as to how you clean up the back side of the part.
@ryanwykes
Жыл бұрын
Yeah gotta cut op 1 with a bit deeper depth than normal, cut the part off with a bandsaw from the remaining stock, face it down to size then reindex position with the probe.
@MoralRichMedia
Жыл бұрын
@@ryanwykes Thank you...good info.
Machine looks like a lot of fun. I was just looking at your part a bit closer and at 3:07 I saw the chamfer on the holes and edges was off. Was that on purpose or did something go awry? Thanks
@ryanwykes
Жыл бұрын
good eye! Op.1 was indexed off a corner and op. 2 was indexed from a center hole with the langmuir probe that was un-tuned.
Great video! How is the CAM software? What did you use before the MR1's software?
@ryanwykes
Жыл бұрын
Hey. The cam software generates the GCode for you. It plots out the tool path. I have always used Fusion 360 but there are others that also work. the software of MR1 is "Cut Control" and it is proprietary software specific to the MR-1. Langmuir does not have cam software, but they play along with multiple different software programs.
hows the probing routine , is it easy to figure out ?
@ryanwykes
Жыл бұрын
quite! it only has the basics for now, home off X, Y, Z, all 3, bore, boss, hoping they will come out with more routines soon.
How does it end?!!!!!
it looks really bothersome to clean without a slanted base and chip auger. might have to pause to clean on big projects. but it looks like it does a fine job.
👍👍👍👍👍👍👍👍👍👍
Nice part and those chips had me memorized... lol us nerdy machine guys find that shizzz to be hypnotic. Do they have you mix a cutting oil base or is that just water? hoping soon i can get one of these bad boys.
@ryanwykes
Жыл бұрын
it's amazing how the machine sounds when it's cutting. the cutting fluid is a mixture of synthetic coolant and tap water.
Do you do work for hire? I'm needing some small pieces milled and this machine looks ideal for the job.
@ryanwykes
5 ай бұрын
sorry for being late to reply. upload your parts to Xometry- they will connect you with someone who can make what you need.
It's pretty good for $4,000!
Hello. Have u seen some markings on the vises or do u know the brand or manufacturer of them?I live in Europe I can't buy from langmuir directly the shipping costs and import taxes are 2x the price of a vise. Any help is appreciated thanks :) keep making them chips!!
@ryanwykes
5 ай бұрын
www.alibaba.com/product-detail/Modular-Vise-High-Quality-Modular-Vise_1600284749436.html?spm=a2700.galleryofferlist.p_offer.d_price.519245d3XMpcsA&s=p
Nice watching these videos isnt making the wait any easier lol are you using the free version fusion thanks
@ryanwykes
Жыл бұрын
I went ahead and got the paid version. It was worth it to me for time savings on certain things.
@mystamo
Жыл бұрын
@@ryanwykes The wait is killing me.. When I get mine I think I might buy fusion on a sub also.. Great Video!
how is the accuracy on these things?
@ryanwykes
Жыл бұрын
I am hitting tenths on steel with a single finishing pass. quite accurate!
What type of coolant are you using? It looks like water.
@ryanwykes
Жыл бұрын
EF-130 from TAZ Industrial Fluids in Conroe. 10 out of 10. Blaser would not reply to me so I went Local.
@T0tenkampf
Жыл бұрын
@@ryanwykes good to know, I am in Porter myself
Where are they made?....chinesium ???
@ryanwykes
Жыл бұрын
I think all individual parts are made in Asia(china), assembled in TX and the finally built in your garage... I have not seen any "chinesium" on this machine like my grizzly equipment
you ended the video too soon!