I followed this tutorial exactly the only thing i didnt do was move the old white piece to the new laser, but the one i ordered came with one already attached.
@user-yr6kk6st8y11 күн бұрын
Thank you for the video. What is the product name of the tape attached to the cable? I don't think it's just Scotch tape
@Warranty-Voided11 күн бұрын
kapton tape
@LafeeshaLearns12 күн бұрын
What mini-screen are you using to test the Wii?
@Warranty-Voided11 күн бұрын
Some backup camera lcd I got of ebay .if you search for that you will find it
@adhdjames311912 күн бұрын
Hey I have a original xbox Halo 2 green see through. Mine will turn on. But no matter what it blinks yellow and displays nothing.
@JRaft0518Ай бұрын
If I were to replace the whole optical drive are there 2 varieties like the lasers?
@Warranty-VoidedАй бұрын
Probably. But I am not for sure
@JRaft0518Ай бұрын
Does it matter what kind of laser ? Or all wii lasers are the same ? Like for the gamecube compatible wii and non
@Warranty-VoidedАй бұрын
Has to be a wii laser and there are 2 versions of laser the wii takes . I explain in the video how to identify the one you need.
@JRaft0518Ай бұрын
Ok thanks . I got cut off watching and I just had to ask lol
@JRaft0518Ай бұрын
Also , I have a Wii that reads fine but it won’t eject. Those little metal clips that keep the disc in doesn’t move at all. Should I just replace the whole optical drive ? Or you think it’s like the motor for the eject ?
@Warranty-VoidedАй бұрын
@@JRaft0518 it's probably the eject motor. I would just replace the whole drive
@The3rdEstate.2 ай бұрын
I appreciate the way they package the screens in oversized replicas of Game Boy cartridges.
@Warranty-Voided2 ай бұрын
Me too very clean
@BeeBee-fk9ce2 ай бұрын
I noticed I didn't need to add that extra touch pad part. Do you know if its needed? Thanks*
@Warranty-Voided2 ай бұрын
Not it's not .you use it if the built in touch sensor doesn't work properly because of placement
@johnnydasio87014 ай бұрын
everything perfect but 4gb usb tool not detected. jrunner detects it but in not show up..
@Warranty-Voided4 ай бұрын
Try a different usb cable also check the orientation of the plug to the xbox header?
@johnnydasio87014 ай бұрын
@@Warranty-Voided Failed to get DiskGeometry.
@Warranty-Voided4 ай бұрын
@@johnnydasio8701 try a different usb port on your pc . I have never seen that error before
@johnnydasio87015 ай бұрын
Hello, after you hook the 4gb flasher for the nand do you connect power to the motherboard (before you connect to pc)?
@Warranty-Voided5 ай бұрын
I don't think it matters. But I would plug it in after the pc
@mikewazowski59005 ай бұрын
I installed a new laser, the disc drive clicks twice, then turns off, why?
@Warranty-Voided5 ай бұрын
Maybe the ribbon Cable is not Seated properly. Do you remove the solder blob on the ribbon cable
@mikewazowski59005 ай бұрын
@@Warranty-VoidedI did, maybe not enough. When I power it up, it clicks twice, spins the disc and then the laser clicks twice before giving up.
@Warranty-Voided5 ай бұрын
@@mikewazowski5900 I would double check to see if it Seated properly and make sure where the solder blob was that there is no solder left bridging the connection. Just take your time on go over it all . Sorry couldn't be more helpful
@Ghostblaze15 ай бұрын
I used this as a guide, unfortunately I probably messed something up while soldering as it no longer gets any video now.
@Warranty-Voided5 ай бұрын
Trying cleaning the port with a toothbrush and rubbing alcohol. Also try reflowing the solder again
@centiq5 ай бұрын
I appreciate the video. Do you know if it is necessary to use the resistor when connecting together those 2 specific points on the backside? I've seen other tutorial videos that say it's optional, but I've never really understood why.
@Warranty-Voided5 ай бұрын
It's safer to use the resistor to protect your cpu . It's not necessary but there super cheap so I would recommend using them . Thank you
@TB-rd6dv5 ай бұрын
I was wondering if you can tell me where does this go inside this part and how can I put it back in. It's like a black arm with a little spring it looks kind of like the white arms in the inside part of the drive on the cover. Please help. When I close it the disk now stops because of it
@Warranty-Voided5 ай бұрын
I am not sure what part you are talking about .did it come out of the disc drive ? Here's my Twitter x.com/vitals817?t=GBk6gV8le0lEth2YPuz0hA&s=09 if you can post a pic thereafter I can help thamks for watching
@ryangiannini50495 ай бұрын
Great video, I’ve had to replace two boards already. I noticed the new boards they sent me have larger power ratings on the switches. Can you tell be where to buy the switch from and what the model is? I’d like to try just replacing the individual switch like you just showed us how to do.
@Warranty-Voided5 ай бұрын
I got my switchs from ebay . Just search by the part number on the relay. Thanks for watching
@adamm.50555 ай бұрын
Could you please tell me where can i buy this relay board online ?
@Warranty-Voided5 ай бұрын
My friend got a replacement from the manufacturer. I think you have to call them for a replacement
@MyPotat6 ай бұрын
I can’t wait to see if I can fix mine! Thank you!
@Warranty-Voided5 ай бұрын
You can do it!
@tgshotoftcr22566 ай бұрын
THANK YoU! No - one else showed how to pull that little notch to get the ribbon to release!
@Warranty-Voided6 ай бұрын
Your so welcome . Thanks for watching
@ameramer-xg4pz6 ай бұрын
Mi querido hermano, tengo una Xbox 360 tipo gorda, la modifiqué, pero no me apareció el panel azul y ahora el dispositivo está roto, ¿qué debo hacer?😢
@Warranty-Voided6 ай бұрын
What motherboard revision was your xbox?
@ameramer-xg4pz6 ай бұрын
@@Warranty-Voided jassper 512
@Warranty-Voided6 ай бұрын
@@ameramer-xg4pz I would look for a video for that motherboard .I have never done that motherboard. Sorry I couldn't help more
@ameramer-xg4pz6 ай бұрын
@@Warranty-Voided Muchas gracias, eres increíble.
@andreslara94176 ай бұрын
How do I know if my x box 360 slim is compatible with this mod(procedure)?
@Warranty-Voided6 ай бұрын
You would have to identify your motherboard version . Lots of pics and info on Google to do so. if it's a corona 4 gb it should work . One other thing you would have to check is if you need a post fix adapter which I went over in the video . Thanks for watching
@theghettotraveler3475 ай бұрын
@Warranty-Voided i have a cornona v1 or v2 but it has post traces but DB3R3 n DB3R4 I Do not see those traces where they should be. My pinouts are not looking like yours. I see DB3R1 DB3R2 DB3R6 DB3R7 But not R3 R4 or even R5 wth. Its killing me right now
@theghettotraveler3475 ай бұрын
@@Warranty-VoidedTo be honest it look like a trinity board with the desolder of the 4gb mu port. The 6 pin traces are there like there was 1 there but some1 desolder it off.
@Warranty-Voided5 ай бұрын
@@theghettotraveler347 the power suppy for your xbox can help identify your motherboard too . If your not finding these solder pads on the silkscreen you probably don't have the right motherboard .
@karanmattutractorsinformat36396 ай бұрын
4gb
@Warranty-Voided6 ай бұрын
Yes this is the 4gb
@karanmattutractorsinformat36396 ай бұрын
Can jb xbox 360e 2013
@Warranty-Voided6 ай бұрын
I think it's possible now days . Not for sure though
@karanmattutractorsinformat36396 ай бұрын
Good
@Warranty-Voided6 ай бұрын
Thank you
@paulbaldwin11536 ай бұрын
What was the purpose of removing the solder? Does it remove a short between connections. What happens if it’s left on? Thanks…
@Warranty-Voided6 ай бұрын
The solder needs to be remove .it's there to protect the laser from damage until it's installed. If it's left it will not read games
@szymons35007 ай бұрын
Install analogs with a Hall sensor, this is a better solution because they do not drift after a long time of playing
@Warranty-Voided7 ай бұрын
I have been thinking about that and will probably do that next time . This was a friend's controller and he provided the replacement joysticks . Where did you get your joystick with hall effect sensors?
@szymons35007 ай бұрын
@@Warranty-Voided I can't even write where I bought it because shitty KZread deletes comments
@szymons35007 ай бұрын
@@Warranty-Voided But this is a popular Chinese site
@Warranty-Voided7 ай бұрын
@@szymons3500 lol
@devonmacdonald44397 ай бұрын
@@Warranty-Voidedwhat tool did you use to Remove the solder?
@TheOriginalVersatile8 ай бұрын
What if rca video doesn't work but component video is working. How to fix?
@Warranty-Voided8 ай бұрын
Check rhe a/v port for bend or discolored pins . Get a flash light and look real close.do you have 2 separate sets of av cable one is rca and one component?
@TheOriginalVersatile8 ай бұрын
@@Warranty-Voided yes I have two separate sets, one av rca and one component. I'll check the av port closer
@Warranty-Voided8 ай бұрын
The rca cable maybe faulty . Do you have another console to verify it is working?
@TheOriginalVersatile8 ай бұрын
@@Warranty-Voided the rca cable works in my 1.6 Xbox but with 1.0 Xbox no video only audio out. I'll check the av connector later today
@richardblaine95382 ай бұрын
@@TheOriginalVersatile you ever find a fix I got the same issue bugging me
@ziadalany57668 ай бұрын
Very good 👍
@Warranty-Voided8 ай бұрын
Thank you very much!!
@red23728 ай бұрын
can you tell me for what the soldering is for? i see no difference if i solder it or not
@Warranty-Voided8 ай бұрын
If your not soldering how did you attach the black wires?
@red23728 ай бұрын
@@Warranty-Voided thats literally my question, if i don‘t solder and leave the black wires out, it still has all the functions
@Warranty-Voided8 ай бұрын
@@red2372 the black wires are for power and start and select wires that's to access the menu options
@Edin218 ай бұрын
Are you aware of any way to fix a pulled post via? Every tutorial I see to rgh/jtag requires that post via to be soldered to.
@Warranty-Voided8 ай бұрын
If the post via is pulled and you can't get a wire soldered to it .than you can do this mod it is required. Sorry I thought you were talking about the adapters thanks for watching
@jtchoi20036 ай бұрын
POST? Well, It's possible to solder to POST on the top of the motherboard if the bottom point is damage. You can also clamp a postfix adapter on the side of the CPU. If you are taling about PLL, then it is impossible to fix on the S/E. You need to use S-RGH or Mufas if PLL is damaged on S/E.
@twistedprepper8 ай бұрын
Do you have an update if that repaired the problem
@Warranty-Voided8 ай бұрын
Not yet my friend keeps it as a backup as he bought a new relay board prior to shipping me this broken one . But I am sure it works as it should
@twistedprepper8 ай бұрын
@@Warranty-Voided thank you for the fast response I appreciate it
@Warranty-Voided8 ай бұрын
@@twistedprepper no problem. I will update you when he uses it .he runs his alot and didn't want down time . So I will have to wait for a update . Thanks for watching
@errcl658 ай бұрын
I plan to do this and upgrade to better Solid State versions with high current rating, these 8A contact relays are borderline IMO. Especially if you run the Eagle oiless pump.
@Warranty-Voided8 ай бұрын
@@errcl65 that would be a great idea!
@daisywong-ke1kz8 ай бұрын
Nice work!! Don't know if you may need any PCBs in the later videos, if so, we'd be glad to offer some. (PCBWay Daisy)🙌
@chickenfoundation93239 ай бұрын
Where did you get your capacitors from? I plan on recapping my whole unit
@Warranty-Voided9 ай бұрын
console5.com could probably help you out . The ram chips I installed in this video were from a broken donor motherboard. Thanks for watching
@marcianzero_yt9 ай бұрын
cool video. How much is this Display Kit?
@Warranty-Voided9 ай бұрын
The lcd kit was 51 and the case was 10 bucks. I put the links in the description from the parts . Thanks for watching
@ANGELMartinez-dg9zk9 ай бұрын
Bro hace un video con el pi pico y los reguladores para esa misma
@Warranty-Voided9 ай бұрын
The steps for the pico would be different.
@robertwittjr119810 ай бұрын
clear audio and video great presentation, i am doing one of these right now for a friend from work. i am a novice and i am doing one step at a time, one other thing i noticed. i discovered to help with doing smc's is to use a mechanical pencil - position smc after prepping board and hold it in place using the eraser end on the pencil. this is good in 2 ways; 1, it is way smaller than my giant fingers and the eraser "gripps" it a bit since it is rubber. and 2, if you accidentally heat it to much you don't get a singed finger. i inspected the board before starting and noticed that the power jack had bad solder joints; they were not dull like a cold joint but cracked loose almost all the way around the base of the solder point.
@Warranty-Voided10 ай бұрын
Good tips thanks for watching
@sliteovmind793010 ай бұрын
I have a 4GB console that requires a POST Fix adapter, I am able to create and write my Xell build but when I plug the console in to get my Key, I get a green light but no video out on any port (component or HDMI), eject button works on the DVD and the drive spins up, I never get a out green dash only the center green LED. Any help would be appreciated.
@Warranty-Voided10 ай бұрын
Sorry never ran into that problem before . I would check all connections . Hopefully someone will comment with some help for you .
@superstar645 ай бұрын
Usually if it doesn't boot it means one of two things: A. Your wiring is bad, and you'll need to check your solder joints. B. One time I made the mistake of not building an RGH 3 image, which can also prevent your console from booting xell. If it's neither of those, your console could also be dead.
@legoboy-ox2kx15 күн бұрын
A lot of the post fix adapters on the market are cheap and don't work very well. You might need to bend it down and try to get it to make contact
@goatified403810 ай бұрын
Where did you buy your laser from
@Warranty-Voided10 ай бұрын
Ebay but you can get them on aliexpress too
@goatified403810 ай бұрын
@@Warranty-Voidedwhich model was yours
@Warranty-Voided10 ай бұрын
@@goatified4038 in oder to see what laser you need you have to take it apart and look at the ribbon Cable on the laser . There is only 2 types one is stright and one is L shaped
@edwardschneider504310 ай бұрын
I have a different version of the Genesis. But the game genie does work but after i do the codes it keeps going back the start up screen
@Warranty-Voided10 ай бұрын
Try cleaning the pins on the game genie and the game
@jayysheehan970111 ай бұрын
Why is it that you gotta clean the the middle piece with rubbing alcohol?
@Warranty-Voided11 ай бұрын
Not for sure what part your talking about . But I use ipa to clean off flux
@gamingwolf789511 ай бұрын
I know this sounds kinda stupid but can i use any wire i have wires from broken usbs would that work with it
@Warranty-Voided11 ай бұрын
Yes you can
@Museo_del_Videojuego11 ай бұрын
I love the iron noises
@Warranty-Voided11 ай бұрын
Nice glad you liked it 👍
@jgvtc55911 ай бұрын
What does this mod do and can the console still play on xbox live after
@Warranty-Voided11 ай бұрын
It allows you to play backups and homebrew. And yes you can still play online .I did this so I could run the halo sunrise project
@youcantstopme513611 ай бұрын
You can play online just don't get your Xbox 360 banned
@cybcarr11 ай бұрын
does it needs a sw to it, or it'll handle just boom?
@Warranty-Voided11 ай бұрын
I don't understand what you are asking
@TexasHollowEarth4 ай бұрын
Needs a 128MB compatible bios. Xecuter 2 bioses won't use it. I've heard that the latest IND bios does. Xecuter 3 can handle it. Pretty sure Cerbios can, too 👍
@bankbank11 ай бұрын
nice vid. would have been cool to hear an explanation about those 3 pins.
@Warranty-Voided11 ай бұрын
The model 3 was a water down version and removed a few connections that disable sega master system games from working and by doing that we lost game genie support as well. In this video we are just adding those lost connections to restore the game genie. Thanks for watching
@everyonesweird821911 ай бұрын
can i use RP 2040 Zero? is there any link for the diagram?
@Warranty-Voided11 ай бұрын
This only works for the pico
@saifi122311 ай бұрын
Which pico version supported for reading and writing nand?
@Warranty-Voided11 ай бұрын
Both types will work
@saifi122311 ай бұрын
@@Warranty-Voided thanks for replying 😊
@Warranty-Voided11 ай бұрын
@@saifi1223 no problem ! thanks for watching
@Liquidcanvas-slc11 ай бұрын
did you need speciality screwdrivers or will standard phillips work
@Warranty-Voided11 ай бұрын
You need torx drivers . You can get them anywhere that sells tools
@mecyanned11 ай бұрын
I found the same xbox thrown away working
@Warranty-Voided11 ай бұрын
Nice !!!
@mecyanned11 ай бұрын
@@Warranty-Voided Is there a way i can do this with an arduino uno? And what is the cheapest place you reccomend for me to get a controller
@Warranty-Voided11 ай бұрын
@@mecyanned not that I am aware of . I got mine from weekend modder . Link in the description.
@mecyanned11 ай бұрын
@@Warranty-Voided i guess ill do some research :|
@kenkem396 Жыл бұрын
thermal surface purifierha ha ha!!
@Warranty-Voided Жыл бұрын
I got them together so I figured I would use it . It did them get the remaining compound off though lmao
@kenkem396 Жыл бұрын
@@Warranty-Voided you did an excellent job thank you for the video
Пікірлер
temp?
I followed this tutorial exactly the only thing i didnt do was move the old white piece to the new laser, but the one i ordered came with one already attached.
Thank you for the video. What is the product name of the tape attached to the cable? I don't think it's just Scotch tape
kapton tape
What mini-screen are you using to test the Wii?
Some backup camera lcd I got of ebay .if you search for that you will find it
Hey I have a original xbox Halo 2 green see through. Mine will turn on. But no matter what it blinks yellow and displays nothing.
If I were to replace the whole optical drive are there 2 varieties like the lasers?
Probably. But I am not for sure
Does it matter what kind of laser ? Or all wii lasers are the same ? Like for the gamecube compatible wii and non
Has to be a wii laser and there are 2 versions of laser the wii takes . I explain in the video how to identify the one you need.
Ok thanks . I got cut off watching and I just had to ask lol
Also , I have a Wii that reads fine but it won’t eject. Those little metal clips that keep the disc in doesn’t move at all. Should I just replace the whole optical drive ? Or you think it’s like the motor for the eject ?
@@JRaft0518 it's probably the eject motor. I would just replace the whole drive
I appreciate the way they package the screens in oversized replicas of Game Boy cartridges.
Me too very clean
I noticed I didn't need to add that extra touch pad part. Do you know if its needed? Thanks*
Not it's not .you use it if the built in touch sensor doesn't work properly because of placement
everything perfect but 4gb usb tool not detected. jrunner detects it but in not show up..
Try a different usb cable also check the orientation of the plug to the xbox header?
@@Warranty-Voided Failed to get DiskGeometry.
@@johnnydasio8701 try a different usb port on your pc . I have never seen that error before
Hello, after you hook the 4gb flasher for the nand do you connect power to the motherboard (before you connect to pc)?
I don't think it matters. But I would plug it in after the pc
I installed a new laser, the disc drive clicks twice, then turns off, why?
Maybe the ribbon Cable is not Seated properly. Do you remove the solder blob on the ribbon cable
@@Warranty-VoidedI did, maybe not enough. When I power it up, it clicks twice, spins the disc and then the laser clicks twice before giving up.
@@mikewazowski5900 I would double check to see if it Seated properly and make sure where the solder blob was that there is no solder left bridging the connection. Just take your time on go over it all . Sorry couldn't be more helpful
I used this as a guide, unfortunately I probably messed something up while soldering as it no longer gets any video now.
Trying cleaning the port with a toothbrush and rubbing alcohol. Also try reflowing the solder again
I appreciate the video. Do you know if it is necessary to use the resistor when connecting together those 2 specific points on the backside? I've seen other tutorial videos that say it's optional, but I've never really understood why.
It's safer to use the resistor to protect your cpu . It's not necessary but there super cheap so I would recommend using them . Thank you
I was wondering if you can tell me where does this go inside this part and how can I put it back in. It's like a black arm with a little spring it looks kind of like the white arms in the inside part of the drive on the cover. Please help. When I close it the disk now stops because of it
I am not sure what part you are talking about .did it come out of the disc drive ? Here's my Twitter x.com/vitals817?t=GBk6gV8le0lEth2YPuz0hA&s=09 if you can post a pic thereafter I can help thamks for watching
Great video, I’ve had to replace two boards already. I noticed the new boards they sent me have larger power ratings on the switches. Can you tell be where to buy the switch from and what the model is? I’d like to try just replacing the individual switch like you just showed us how to do.
I got my switchs from ebay . Just search by the part number on the relay. Thanks for watching
Could you please tell me where can i buy this relay board online ?
My friend got a replacement from the manufacturer. I think you have to call them for a replacement
I can’t wait to see if I can fix mine! Thank you!
You can do it!
THANK YoU! No - one else showed how to pull that little notch to get the ribbon to release!
Your so welcome . Thanks for watching
Mi querido hermano, tengo una Xbox 360 tipo gorda, la modifiqué, pero no me apareció el panel azul y ahora el dispositivo está roto, ¿qué debo hacer?😢
What motherboard revision was your xbox?
@@Warranty-Voided jassper 512
@@ameramer-xg4pz I would look for a video for that motherboard .I have never done that motherboard. Sorry I couldn't help more
@@Warranty-Voided Muchas gracias, eres increíble.
How do I know if my x box 360 slim is compatible with this mod(procedure)?
You would have to identify your motherboard version . Lots of pics and info on Google to do so. if it's a corona 4 gb it should work . One other thing you would have to check is if you need a post fix adapter which I went over in the video . Thanks for watching
@Warranty-Voided i have a cornona v1 or v2 but it has post traces but DB3R3 n DB3R4 I Do not see those traces where they should be. My pinouts are not looking like yours. I see DB3R1 DB3R2 DB3R6 DB3R7 But not R3 R4 or even R5 wth. Its killing me right now
@@Warranty-VoidedTo be honest it look like a trinity board with the desolder of the 4gb mu port. The 6 pin traces are there like there was 1 there but some1 desolder it off.
@@theghettotraveler347 the power suppy for your xbox can help identify your motherboard too . If your not finding these solder pads on the silkscreen you probably don't have the right motherboard .
4gb
Yes this is the 4gb
Can jb xbox 360e 2013
I think it's possible now days . Not for sure though
Good
Thank you
What was the purpose of removing the solder? Does it remove a short between connections. What happens if it’s left on? Thanks…
The solder needs to be remove .it's there to protect the laser from damage until it's installed. If it's left it will not read games
Install analogs with a Hall sensor, this is a better solution because they do not drift after a long time of playing
I have been thinking about that and will probably do that next time . This was a friend's controller and he provided the replacement joysticks . Where did you get your joystick with hall effect sensors?
@@Warranty-Voided I can't even write where I bought it because shitty KZread deletes comments
@@Warranty-Voided But this is a popular Chinese site
@@szymons3500 lol
@@Warranty-Voidedwhat tool did you use to Remove the solder?
What if rca video doesn't work but component video is working. How to fix?
Check rhe a/v port for bend or discolored pins . Get a flash light and look real close.do you have 2 separate sets of av cable one is rca and one component?
@@Warranty-Voided yes I have two separate sets, one av rca and one component. I'll check the av port closer
The rca cable maybe faulty . Do you have another console to verify it is working?
@@Warranty-Voided the rca cable works in my 1.6 Xbox but with 1.0 Xbox no video only audio out. I'll check the av connector later today
@@TheOriginalVersatile you ever find a fix I got the same issue bugging me
Very good 👍
Thank you very much!!
can you tell me for what the soldering is for? i see no difference if i solder it or not
If your not soldering how did you attach the black wires?
@@Warranty-Voided thats literally my question, if i don‘t solder and leave the black wires out, it still has all the functions
@@red2372 the black wires are for power and start and select wires that's to access the menu options
Are you aware of any way to fix a pulled post via? Every tutorial I see to rgh/jtag requires that post via to be soldered to.
If the post via is pulled and you can't get a wire soldered to it .than you can do this mod it is required. Sorry I thought you were talking about the adapters thanks for watching
POST? Well, It's possible to solder to POST on the top of the motherboard if the bottom point is damage. You can also clamp a postfix adapter on the side of the CPU. If you are taling about PLL, then it is impossible to fix on the S/E. You need to use S-RGH or Mufas if PLL is damaged on S/E.
Do you have an update if that repaired the problem
Not yet my friend keeps it as a backup as he bought a new relay board prior to shipping me this broken one . But I am sure it works as it should
@@Warranty-Voided thank you for the fast response I appreciate it
@@twistedprepper no problem. I will update you when he uses it .he runs his alot and didn't want down time . So I will have to wait for a update . Thanks for watching
I plan to do this and upgrade to better Solid State versions with high current rating, these 8A contact relays are borderline IMO. Especially if you run the Eagle oiless pump.
@@errcl65 that would be a great idea!
Nice work!! Don't know if you may need any PCBs in the later videos, if so, we'd be glad to offer some. (PCBWay Daisy)🙌
Where did you get your capacitors from? I plan on recapping my whole unit
console5.com could probably help you out . The ram chips I installed in this video were from a broken donor motherboard. Thanks for watching
cool video. How much is this Display Kit?
The lcd kit was 51 and the case was 10 bucks. I put the links in the description from the parts . Thanks for watching
Bro hace un video con el pi pico y los reguladores para esa misma
The steps for the pico would be different.
clear audio and video great presentation, i am doing one of these right now for a friend from work. i am a novice and i am doing one step at a time, one other thing i noticed. i discovered to help with doing smc's is to use a mechanical pencil - position smc after prepping board and hold it in place using the eraser end on the pencil. this is good in 2 ways; 1, it is way smaller than my giant fingers and the eraser "gripps" it a bit since it is rubber. and 2, if you accidentally heat it to much you don't get a singed finger. i inspected the board before starting and noticed that the power jack had bad solder joints; they were not dull like a cold joint but cracked loose almost all the way around the base of the solder point.
Good tips thanks for watching
I have a 4GB console that requires a POST Fix adapter, I am able to create and write my Xell build but when I plug the console in to get my Key, I get a green light but no video out on any port (component or HDMI), eject button works on the DVD and the drive spins up, I never get a out green dash only the center green LED. Any help would be appreciated.
Sorry never ran into that problem before . I would check all connections . Hopefully someone will comment with some help for you .
Usually if it doesn't boot it means one of two things: A. Your wiring is bad, and you'll need to check your solder joints. B. One time I made the mistake of not building an RGH 3 image, which can also prevent your console from booting xell. If it's neither of those, your console could also be dead.
A lot of the post fix adapters on the market are cheap and don't work very well. You might need to bend it down and try to get it to make contact
Where did you buy your laser from
Ebay but you can get them on aliexpress too
@@Warranty-Voidedwhich model was yours
@@goatified4038 in oder to see what laser you need you have to take it apart and look at the ribbon Cable on the laser . There is only 2 types one is stright and one is L shaped
I have a different version of the Genesis. But the game genie does work but after i do the codes it keeps going back the start up screen
Try cleaning the pins on the game genie and the game
Why is it that you gotta clean the the middle piece with rubbing alcohol?
Not for sure what part your talking about . But I use ipa to clean off flux
I know this sounds kinda stupid but can i use any wire i have wires from broken usbs would that work with it
Yes you can
I love the iron noises
Nice glad you liked it 👍
What does this mod do and can the console still play on xbox live after
It allows you to play backups and homebrew. And yes you can still play online .I did this so I could run the halo sunrise project
You can play online just don't get your Xbox 360 banned
does it needs a sw to it, or it'll handle just boom?
I don't understand what you are asking
Needs a 128MB compatible bios. Xecuter 2 bioses won't use it. I've heard that the latest IND bios does. Xecuter 3 can handle it. Pretty sure Cerbios can, too 👍
nice vid. would have been cool to hear an explanation about those 3 pins.
The model 3 was a water down version and removed a few connections that disable sega master system games from working and by doing that we lost game genie support as well. In this video we are just adding those lost connections to restore the game genie. Thanks for watching
can i use RP 2040 Zero? is there any link for the diagram?
This only works for the pico
Which pico version supported for reading and writing nand?
Both types will work
@@Warranty-Voided thanks for replying 😊
@@saifi1223 no problem ! thanks for watching
did you need speciality screwdrivers or will standard phillips work
You need torx drivers . You can get them anywhere that sells tools
I found the same xbox thrown away working
Nice !!!
@@Warranty-Voided Is there a way i can do this with an arduino uno? And what is the cheapest place you reccomend for me to get a controller
@@mecyanned not that I am aware of . I got mine from weekend modder . Link in the description.
@@Warranty-Voided i guess ill do some research :|
thermal surface purifierha ha ha!!
I got them together so I figured I would use it . It did them get the remaining compound off though lmao
@@Warranty-Voided you did an excellent job thank you for the video