Пікірлер

• 
  @ykwoo5314 сағат бұрын

  Could you tell me that rear bulge air intake function , why in the rear

• 
  @Ducesweden3 күн бұрын

  Hahahaha, you just had to add an "E" to the Swedish "aceton" 😂

• 
  @Ghostrider-lm9en5 күн бұрын

  Excellent video! Sometimes when I airbrush I have to pull the lever back a pretty significant amount to get my paint to start spraying out. Once it starts spraying I can bring the nozzle forward to get the fine spray pattern I want, but if I release the lever completely, I have to pull it a ways back again. It makes it difficult cause ill be pointing the brush at a paper towel waiting, and then a lot of paint suddenly starts flowing out. This is accompanied by occasional sputtering as well. Any idea why this may be?

• 
  @AliRadaa8 күн бұрын

  Is there a kit where the propellers can freely rotate?

• 
  @TheInnerNerd6 күн бұрын

  Hello and thank you for watching. I don't know of any off the top of my head, but I you can modify the nose cone and shift to allow it to rotate.

• 
  @Lurker12228 күн бұрын

  Well im gonna have to watch this 10 more times.. lol

• 
  @TheInnerNerd6 күн бұрын

  Hello and thanks for watching. I'm glad you're finding the video useful enough to rewatch. Maybe this is why it has over 1million views 😂

• 
  @OdysseyAviation9 күн бұрын

  Why you sand the top of the aircraft ?

• 
  @TheInnerNerd6 күн бұрын

  Hello and thanks for watching. I sand the clear coat varnish to make the surface smooth and also prepare it for the weathering. Oil washes stick better to a satin surface as I mention in the video, so this sanding both improves the finish and prepares for the next step

• 
  @jaymorris34689 күн бұрын

  Excellent.

• 
  @TheInnerNerd6 күн бұрын

  Thank you and thanks for watching:)

• 
  @edutaimentcartoys9 күн бұрын

  wow, very detail and amazing repaint

• 
  @TheInnerNerd6 күн бұрын

  Thank you and thanks for watching:)

• 
  @ronaldchang888510 күн бұрын

  Thanks for this great video! I always love Tamiya's model kit, quick and cheerful, never over engineering with crazy numbers of parts!

• 
  @TheInnerNerd6 күн бұрын

  Thank you and thanks for watching:)

• 
  @andrewcampbell71510 күн бұрын

  Weathering is superb!!! Especially the exhaust, by far the best exhaust finish on a WW II warbird I’ve seen!!! Excellent 👍👍👍

• 
  @TheInnerNerd10 күн бұрын

  Thank you, and thanks for watching :)

• 
  @Another_dabdabi13 күн бұрын

  I bought a really cheap airbrush 1 weeks ago. I put a paint in it then it started flowing into the hose. Does that happen to other airbrushes too?

• 
  @jimmyshelton655814 күн бұрын

  Hi mate have you ever built a BN _2A ISLANDER THE RED DEVILS FF TEAM PLEASE THNX JIMMY

• 
  @stevendillon859215 күн бұрын

  I got my AIRFIX LANCASTER kit from the Woolworths store in Hoylake, Wirral, Cheshire in 1958 😃

• 
  @TheInnerNerd14 күн бұрын

  Ahh Cheshire! I know Hoylake and I'm from Cheshire. The Lanc is is a classic kit for Airfix 👌 Thanks for watching:)

• 
  @user-ed2ti3bs4d15 күн бұрын

  😊😅😅😊😊😊😊😊😊😊😊😊

• 
  @jimmyshelton655816 күн бұрын

  BRILLIANT JOB ON THE RED ARROWS MODEL

• 
  @TheInnerNerd14 күн бұрын

  Thank you, and thanks for watching :)

• 
  @jimmyshelton655816 күн бұрын

  BRILLIANT JOB MATE

• 
  @TheInnerNerd14 күн бұрын

  Thank you, and thanks for watching :)

• 
  @jimmyshelton655816 күн бұрын

  HI MATE WHERE CAN I GET THAT VICE FROM PLZ & HOW MUCH THNX JIMMY

• 
  @TheInnerNerd14 күн бұрын

  Hi Jimmy. If you're talking about the workstand jig unfortunately it's no longer available. I used to sell them on my website whilst I launched this video. Thanks for watching

• 
  @timcalhoun703116 күн бұрын

  Awesome job!! If only the IFR light on the vertical tail wasn't broken off. That's about to only readily visible issue I see with it...

• 
  @TheInnerNerd14 күн бұрын

  Thank you, and thanks for watching :)

• 
  @gavin265117 күн бұрын

  A well delivered film on this model with great explanation and research, an excellent paint job on this kit and the end product is fantastic , thank you for sharing

• 
  @TheInnerNerd14 күн бұрын

  Thank you, and thanks for watching :)

• 
  @kaipath800918 күн бұрын

  Moin, why is Part 1 no longer available? Or does the link just not work?

• 
  @TheInnerNerd18 күн бұрын

  The video is still there, link must have changed. Here's the latest kzread.info/dash/bejne/X3ugy8R9f7S_odI.htmlsi=BSW5WyedjXFR4458

• 
  @kaipath800918 күн бұрын

  @@TheInnerNerd Thanx for your help 👍

• 
  @tullyDT19 күн бұрын

  That's amazing work. What sources did you use to find out information on the extra details you made yourself?

• 
  @TheInnerNerd18 күн бұрын

  Thank you. I mainly use reference photos I find via Google. The name of the aircraft followed by 'walkaround' usually shows some good results if you're looking for the same. Otherwise I find Pinterest great references :)

• 
  @FuatMuci20 күн бұрын

  eline sağlık

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @Michu3242121 күн бұрын

  Are MRP paints suitable for painting with a brush? This applies to large surfaces such as camouflage

• 
  @TheInnerNerd18 күн бұрын

  Unfortunately not. They're way too thin to be brushed in any controllable manor, however I've never actually tried. I'd go for another brand which isn't pre-thinned if you're going to be using a brush. Thanks for watching :)

• 
  @Michu3242118 күн бұрын

  @@TheInnerNerdok, if you can, tell me some paint that is suitable for a brush and looks very similar to this one. I want to build f4u 1d Corsair from tamiya and i dont know which paint should i use beacuse i know that tamiya paints arę not good for brush

• 
  @TheInnerNerd18 күн бұрын

  I recommend AK Real Colours, thinned with AK Higb compatibility thinner. These are the paints I normally use and can be brush painted as well. I don't do much brush painting other than on small details but these paints have been good for me

• 
  @wrongwrong112221 күн бұрын

  У меня уже сделано 16 танков, сейчас делаю ,,тигр в,, У нас нету столько материалов, как у вас( Я рисую только кисточками 😊 Ваши работы очень качественные 100%

• 
  @TheInnerNerd18 күн бұрын

  Thank you and good luck with your model building too! :)

• 
  @wrongwrong112221 күн бұрын

  Зачёт! 😊

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @gavin265124 күн бұрын

  Bring on the General!!! Best weapon ever, I was Sf platoon or the Machine gun Platoon, for best part of my career, a brilliant and reliable weapon in its own right and when coupled with the tri pod and c2 sight a real enemy stopper, should never have changed to 5.56, pea shooter springs to mind , SLR and GPMG should have remained the staple, for infantry at least, proper man stoppers, , long live the general, keep up the great channel sir love the content,

• 
  @IsaiJacobLaurrabaquio25 күн бұрын

  I think that the majority who comment on this kit either am I the only one who finds this f-16 beautiful for me it is a beauty I have been a modeller for many years and now they want everything easy or they are incompetent It fit me very well

• 
  @ToxicWastoid-km3mt25 күн бұрын

  Cool tips I'm @ that stage of life that Guys around age (37) starts having A growing interest & appreciation of older things of A past they didn't experienced especially the world wars. My dad @ my age collected commemorative ww2 plates .yesh Me I'm getting into modeling of military tech of more modern one I have Models of the The Seahawk ,A-10, ma2 Abrams, F102 intercepter, and haven't done them yet these tips are helpful.

• 
  @keithsweat751327 күн бұрын

  Another excetional build, thank you for being out there for us nerds I love how you bagged it all, " Im not having fun anymore" Alot could use that advice in life

• 
  @TheInnerNerd14 күн бұрын

  Thank you, and thanks for watching :)

• 
  @MaxwellSmart6425Ай бұрын

  Very impressed with your attention to detail, one question though is that photo etched section in your video, does that come with the model or do you find that somewhere else?

• 
  @TheInnerNerd18 күн бұрын

  Thank you. This kit comes with the Photo etch in the box as it a limited edition. Eduard ProfiPack also contain the PE parts too whereas the Weekend editions are just the plastic sprues and decals. Thanks for watching :)

• 
  @tubikcnАй бұрын

  the very first seconds of the video reminded me the situation when I threw out my Su-32FN model right out of my window from 5-th floor of my condo 20 years ago... but in my case - i wasn't happy with the way how I filed down the place around the canopy, so the canopy itself was not more adjusting to that place... anyway, I kind of felt the moral relief at that moment)))

• 
  @RobertGraham-vk4jzАй бұрын

  I think you did a great job on it.

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @AverageGreaseMonkeyАй бұрын

  I would love a video on airbrushing. I just got mine and i am struggling with the paint mixing and how to make camoflauge patterns.

• 
  @TheInnerNerd18 күн бұрын

  Here you go! :) kzread.info/dash/bejne/m3ijtcqDj9CnZZs.htmlsi=60xHoQijXFWqXjOX

• 
  @AverageGreaseMonkey18 күн бұрын

  @@TheInnerNerd thank you kindly sir!

• 
  @grapetonenatches186Ай бұрын

  What is it about airbrushing and 100 year old airplanes.

• 
  @mazinman3Ай бұрын

  I think this is one of your best weathering applications. You did a superb job. I really like this build. Well done!

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @leechapman7848Ай бұрын

  The link to your paint stand isn't working

• 
  @allgood6760Ай бұрын

  Nice!.. well done mate 👍✈️🇳🇿

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @pilotazo8618Ай бұрын

  What a beautiful paint job. You must be proud of yourself!

• 
  @blacknass194325 күн бұрын

  jea truly amazing ! the end picturs ar super !

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @JintySteam1Ай бұрын

  You basically need to spend a lot just on the equipment before even attempting to make a kit XD

• 
  @eottoe2001Ай бұрын

  Nice build. The P-51D had an advanced look even though the designs go back to early 1940. It still looks contemporary. TY for the video.

• 
  @TheInnerNerd18 күн бұрын

  Thank you and thanks for watching :)

• 
  @RyanSVKАй бұрын

  Man, Im building this model right now while on deployment, and I have nothing in terms of tools and accesories like you, damn, I have just tools from local hardware store and few paints from aliexpress, but you gave me a lot of ideas and motivation to build it like you!

• 
  @TonyMac381Ай бұрын

  Great video. How many ml of thinner and colors (Tamiya) did you put in the airbrush?

• 
  @TheInnerNerdАй бұрын

  Thank you. It's around 2ml into the cup with the paint being pre-thinned like I showed in the video. I never use exact measurements since each paint varies slightly, even between colours. Hope this helps and thanks for watching :)

• 
  @ljscalemodels526Ай бұрын

  IN great video, im about to start the Airfix version - ive no metalic paint so probably a camo version, thanks for sharing, cheers Liam

• 
  @TheInnerNerdАй бұрын

  Thanks Liam. Best of luck with your build, I can recommend these AK Xtreme metals when you're ready to get some metallics. Alclad are also great but stink a bit compared to these ones. Thanks for watching :)

• 
  @ljscalemodels526Ай бұрын

  @@TheInnerNerd cheers IN - I’ll have to wait until I’m back home as getting stuff sent out to Saudi is risky - thanks for looking in.

• 
  @GOODEY41Ай бұрын

  Great video i am just getting into modeling used your list on what to buy to get me started massive thank you

• 
  @TheInnerNerdАй бұрын

  Thank you and best of luck starting with the hobby! Thanks for watching :)

• 
  @andysbowdenАй бұрын

  I've just bought a Bartsharp SB03 and an Oasser Ak1 Airbrush kit from Amazon. Assuming I get into it, I'll get something better later.

• 
  @TheInnerNerdАй бұрын

  Great start and I've heard good things about Bartsharp. Take your time and the expensive airbrushes are only marginally better than the cheap ones, the process is what makes a good paint finish :) Thanks for watching and best of luck :)

• 
  @andysbowdenАй бұрын

  @@TheInnerNerd Thanks mate. No one learns guitar on a Gibson. :-)

• 
  @user-ni2zo5zo3cАй бұрын

  An excellent kit of a prominent aircraft, with expert execution in the build at all points. A capital job, that, mate!

• 
  @TheInnerNerdАй бұрын

  Thank you and thanks for watching :)

• 
  @iannicholls7476Ай бұрын

  Great stuff, very useful. Thanks.

• 
  @TheInnerNerdАй бұрын

  Thank you and thanks for watching :)

• 
  @GOODEY41Ай бұрын

  Great video just starting out on my model making career. Thank you

• 
  @TheInnerNerdАй бұрын

  Thank you, best of luck with the career! Thanks for watching :)

• 
  @benthorogood4140Ай бұрын

  Excellent video, absolutely amazing work. I can’t believe the level and attention to detail. You’ve inspired me to have a go at airbrushing myself.

• 
  @TheInnerNerdАй бұрын

  Thank you and thanks for watching :)

• 
  @Johnny-tt8zcАй бұрын

  I have two of the hobby boss 1/48 J-29 ‘s. Saw the UN scheme and liked it, but the silver standard version is nice also. Hence two kits. Not sure if I should follow the instructions and use the #11 humbrol silver, do it in dull aluminum.. yours turned out lovely.

• 
  @TheInnerNerdАй бұрын

  Thank you. This was a nice aircraft to model and is still one of my favourites. I prefer the AK Xtreme metals over Humbrol, but that's my choice to recommend. Best of luck and thanks for watching :)