Hello, thank you for viewing my display base for Eduard Harrier GR7 ZD379. I hope you enjoyed the video and remember to activate subtitles using the ""CC Closed Captions" option in the video menu. I hope you like the display, I am planning on more complex dioramas in the future so please comment your thoughts on what I should do next! This was my first ever go at any type of scenery so wanted to keep it simple but I got a lot of learning from it. Many thanks and happy modelling The Inner Nerd

@hgbarnes1584

4 жыл бұрын

You make it look so easy. It is easy for you because you're BRILLIANT!!!! :) Thanks for the video.

@MrPolicekarim

4 жыл бұрын

cool looking dio mate!

The dio is great. Simple. But not everything in life beefs to be complicated. What I'm most pleased about (and respect for addressing the problem) is that you built the kit, acknowledged there was a problem with the centerline wheels, went away and did something about it. That's put my respect value up 10 fold. Bravo. And it worked. Looks miles better

The contrast between snow white and Harrier's camouflage paint is very amazing! It ’s really fresh!

Simple base but very effective dio....such a great watch. If this is your first and you're intending to build more.....count me in....I'll be watching out for the next ones. Great job!

Great dio, and the Harrier looks fantastic in this camo scheme.

AWESOME. I absolutely love the scratch built ladder and parking chalks. Very well done diorama. Till the next take care and have a great weekend my friend

Hi love your vids

Очень интересно! 👍🤔Возьму на заметку! 👍

It looks incredible! The ladder is perfect, and the diorama really suits the harrier!

a Masterpiece, as always

Wonderfully simple diorama that’s given me inspiration 😊 Thank you!

First diorama but already an expert, great job!

I am going to have to try that snow base technique! 🤯

Great video, gives me encouragement to make a similar diorama.

Cool diorama. I liked the scratchbuilt ladder. Bill

Great looking Harrier and snow diorama sets it off nicely mate 😍👍

Really nice work, the footprints were something I wouldn't have even thought of but make the diorama so much nicer

Приветствую! Классно получилось!!!

Superb attention to detail...bravo 👏👏 👍

Thank you, thank you, thank you. It worked out well. 😊

@TheInnerNerd

Жыл бұрын

Thank you and thanks for watching :)

This one would win an award at Telford!

Beautiful work mate very nicely done till next time have a good one

Great save! I normally don't like dios but you did a great job, as usual. Snow effects look great and the foot prints are genius. The ladder was a challenge on its own..great job!

Very very nice

WOW !!!! What a brilliant but simple diorama, totally enthralled by your ability to throw a few things at a base, and come up with an excellent addition to a build.. also many thanks for showing the ladder 'build', I'm currently just about to finish a Carrier Deck dio with the Kinetic 1/48 Sea Harrier FRS.1 and after buying a 'Photoetch' ladder I've found although it's 1/48 scale it looks to small to actually fit. so thankfully when some supplies arrive i can build one based on your measurements... cheers, keep up the good work mate.. best wishes chris

Very nice!

@TheInnerNerd

3 жыл бұрын

Thank you and thanks for watching :)

Збсенно получилось, ваще тема)

Супер👍🏻

There's already several ladders out there for 1/48 scale Harrier. David J. Parkins has some photo-etch Harrier ladders on his online store. Hannants in the UK also has some photo-etch ladders for the Harrier and other RAF planes.

@TheInnerNerd

4 жыл бұрын

Yes I've seen a lot of images and looked in all the shops for some PE ones. There are a lot available bit none for the GR7 or 9 variants. Mainly sea Harrier or GR3 which looking at the reference images are different to the ones used at Bardufoss on the GR7

Frickin stunning mate 😉👍,hello from Cheshire

@TheInnerNerd

4 жыл бұрын

Thank you Tim. You're from Cheshire!?! So am I 😂 hello from Cheshire to you too 🖐

@xjrthirteen

4 жыл бұрын

@@TheInnerNerd Hey, me too!! Hello to you both!

I remember it well 2004 Operation Snow Falcon it was actually IV (AC) that were out there as I was one of the Armourers on that Squadron, just that Cottesmore 1F, 3F and us on IV used to borrow each others A/C that were servicable and had enough hours on between any large service. Happy Days..................

one off many great video's. one question: wich or what for spray comes one before de snow balloons is that glue?

@TheInnerNerd

3 жыл бұрын

Thank you. Yes that's PVA glue that's been watered down so that the airbrush will spray it. Thanks for watching :)

Wow! Impressive build. What thinner ratio do you use? Can't find the answer anywhere...

@TheInnerNerd

4 жыл бұрын

I use 70:30 for the oils and around 50:50 for everything else as a general rule. Thanks for watching

Great work. By the way, what is the background music??

@TheInnerNerd

4 жыл бұрын

Thank you! All music credits are at the end of the video

I saw the camo scheme out of the corner of my eye on TV utube,could i find it again?Then saw your notification,.Bit like your work.

@darronhedges5873

4 жыл бұрын

Perfect.

Are you ever going to add the canopy explosive charges?

@TheInnerNerd

4 жыл бұрын

If I can find some aftermarket ones then yes but I don't intend to buy a whole set just to get one decal off for this one. Seems a waste of money since its just on a shelf at home. Not accurate I know but it's not being assessed by an IPMS judge there 😄

Liked this, nice job. I think maybe lots more footprints would be realistic: some ground crew plus pilot

@TheInnerNerd

2 жыл бұрын

Thank you and thanks for watching :)

Can you tell me what the coloured pens are please when you did the interior on the harrier

@TheInnerNerd

2 жыл бұрын

Yes these are Unibal POSCA PC-1MR. The full build video is also on my channel and you can see them in action there. Thanks for watching :)

a couple of questions for you Q1 what thickness brass did you use? Q2 what thickness evergreen did you use ? please

@TheInnerNerd

4 жыл бұрын

The brass is 0.127mm (0.005") The evergreen strip is item number 122 0.5x1mm (0.02x0.04")

@gsxrdave1974

4 жыл бұрын

Thanks I'll make a note of that

Great Harrier. Quick tip when photographing a white object dont use a white backdrop...its horrendous to look at. Dark grey or plain black...

@TheInnerNerd

4 жыл бұрын

Thank you. And yes I agree, I would have used black but since a lot of other KZreadrs use black I wanted this to be uniquely "Inner Nerdy". I keep getting confused for Plasmo, which isn't a bad thing I guess, but it would be nice not to be called David since I'm not him 😅 also makes the base look like it's edgless which I thought might be cool

@johnwanderin3872

4 жыл бұрын

The Inner Nerd I don’t mind the white background. Fits the theme of the plane nicely. Gives it a white out condition vibe.

@TheInnerNerd

4 жыл бұрын

Yes thats kind of what I was going for, it makes the base kind of extend into the surroundings a bit more

@johnwanderin3872

4 жыл бұрын

The Inner Nerd seeing as I’m a fan of the arts and grew in a photography loving household, I see these things. Also why I watch you and other guys like Plasmo and ScaleModelAircraft. You guys produce works of art. My model building is definitely not on this level lol.

Почему нет названий чем красите???

@TheInnerNerd

4 жыл бұрын

Если вы использовали опцию CC Closed captions в меню видео, все продукты, которые я использую, имеют субтитры в видео