Project Basecamp

Project Basecamp

Camping, overlanding and exploring!

Email Me: [email protected]

Etenwolf Air 3 Review

Etenwolf Air 3 Review

Пікірлер

  • @helenaheller8073
    @helenaheller80732 күн бұрын

    Very informative. Most enjoyable.

  • @ThomasJeffersonWolfcall-kn3bx
    @ThomasJeffersonWolfcall-kn3bx2 күн бұрын

    The intro could be tightened up a bit.

  • @LoneWolf1985BK
    @LoneWolf1985BK2 күн бұрын

    Thanks for the video. Got directed here from Forest River site. My fridge has been working great for a year and then mid trip started having issues with the freezer holding temp but not the fridge. Going to pull the thermostat when I get home to see if the factory screw went out of adjustment and loosened up over time with rotating the dial. Or I’ll adjust to try and get it back where it should be! Sad these units don’t have factory offered parts.

  • @EXTRAExpeditionTrailer
    @EXTRAExpeditionTrailer3 күн бұрын

    I decided to install the shower cabin in my trailer. Cool idea to use TV holder to assembly the shower cabin.

  • @charlesfrye1942
    @charlesfrye19424 күн бұрын

    Have these arms on my 23 pro4x best upgrade ever a must for any lift in these trucks!

  • @johnmccool6875
    @johnmccool68757 күн бұрын

    What about a Four Wheel Camper pop up? Scout is coming out with one as well....good luck!

  • @ProjectBasecamp
    @ProjectBasecamp7 күн бұрын

    Check out our newer videos!

  • @UnpopularGameGuy
    @UnpopularGameGuy13 күн бұрын

    If only we could edit out the background noise if you know what i mean 😂

  • @dansouthcomb5439
    @dansouthcomb543921 күн бұрын

    You set the temperature for the refrigerator, but what about the freezer?

  • @ProjectBasecamp
    @ProjectBasecamp21 күн бұрын

    This model does not have a separate setting for the freezer

  • @regkershaw
    @regkershaw22 күн бұрын

    A bloody top idea. Well done. What was the overall cost ?

  • @thinkingkingdomthoughts
    @thinkingkingdomthoughts27 күн бұрын

    My husband said you used to be able to buy LP regulators. A regulator can get higher pressure the tighter you screw it down. I hope they still sell them so you can cook outside your rig too.

  • @rimfirejunkie7427
    @rimfirejunkie7427Ай бұрын

    How does the 4Rnner do towing it?

  • @airtazznunya5724
    @airtazznunya5724Ай бұрын

    would be cool to add a digital display where we could select the psi to stop on

  • @martinkolar3595
    @martinkolar3595Ай бұрын

    Super Good!

  • @thejungalope2900
    @thejungalope2900Ай бұрын

    Your work bench clutter is giving me an anxiety attack 😮😂

  • @woofman4796
    @woofman4796Ай бұрын

    Sasquatch country

  • @ramoncampa9334
    @ramoncampa9334Ай бұрын

    The cackling chickens ruined the video, for real!

  • @woofman4796
    @woofman4796Ай бұрын

    I don't know why you need a weight/sway control hitch on such a short and light trailer??

  • @algorithmicalychallenged.291
    @algorithmicalychallenged.291Ай бұрын

    Super thank you....doing this for my titan

  • @jammy93981
    @jammy93981Ай бұрын

    How many of these strips did you buy? Or how long of a run? Thanks and great video!

  • @georgeradford3020
    @georgeradford3020Ай бұрын

    Maybe you should forget about camping in an RV and just get a motel room next time since you were so miserable and complained about everything, some people just ain’t cut out for this lifestyle

  • @ProjectBasecamp
    @ProjectBasecampАй бұрын

    😂

  • @Sunlandexpress
    @SunlandexpressАй бұрын

    Find someone who can 3d print you one

  • @Allium_369
    @Allium_369Ай бұрын

    Cool but not worth the price! The cost to build this is much lower. They should have made this more budget friendly since it’s a budget minimalist tent trailer.

  • @charlisquiroga740
    @charlisquiroga7402 ай бұрын

    I need to know where I buy it, who makes the base of the winch

  • @charlisquiroga740
    @charlisquiroga7402 ай бұрын

    Friend, I'm interested in knowing where I buy the base of the winch.

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    The link is already in the description below the video.

  • @rialisayumang4283
    @rialisayumang42832 ай бұрын

    thats dangerous! these guys are lucky the truck did not decide to lay on their lap..

  • @DarthBaeza
    @DarthBaeza2 ай бұрын

    Did I miss something? Where's the part where you show us what to disconnect and where to reconnect? Respectfully, I don't understand.

  • @Nadbadass
    @Nadbadass2 ай бұрын

    Can i ask how tall you are? I liked how you showed how you fit but wondering what your height is for reference.

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    I am 6’

  • @Nadbadass
    @Nadbadass2 ай бұрын

    @@ProjectBasecamp Thanks. I'm a bit taller at 6'3". Seriously considering a summit as it checks a lot of boxes. Thanks for all the videos.

  • @markhornibrook8642
    @markhornibrook86422 ай бұрын

    Great idea How is it going after 8 months?

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    Great, actually! I am super surprised it hasn’t rusted yet

  • @michaelnakhla1515
    @michaelnakhla15152 ай бұрын

    I wire it to the factory harness according to there website but the right signal and brake lights doesn’t work.after contacting customer service ,they admit the wiring is good but they ask me to buy the plug and play cable .guess what still not working.don’t but this product for Toyota 4 runner

  • @kylerprewitt
    @kylerprewitt2 ай бұрын

    Thanks for the shout out! Great job capturing the process.

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    Thank YOU for the idea!

  • @arturo4109
    @arturo41092 ай бұрын

    excellent work 👏

  • @dalekarraker6851
    @dalekarraker68512 ай бұрын

    I just stumbled over your channel while looking for content regarding the Mission Overland Summit (I'm picking mine up next week). The "awning knot" that you tied is called a "half hitch" and is one of the most versatile and usefule knots you can learn. See you on the road sometime. ~dale

  • @otwer22
    @otwer222 ай бұрын

    Hello fellow Denverite, we are interested in the 15TB, and I am trying to avoid going and seeing one since we are a ways off in the planning, but how tall are you for reference? Both me and my wife are on the shorter side. I’m 5’7” and possibly won’t need this mod. Thanks.

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    I’m 6’, but I would recommend it anyway. My wife is only 5’4 or so and even she can catch a corner with her forehead

  • @otwer22
    @otwer222 ай бұрын

    Thanks for the reply, dang maybe in the 2025 they will fix this, that looked like a lot of work and I’m not very handy.

  • @Deontjie
    @Deontjie2 ай бұрын

    Just shows you, people from Africa can invent world beating products.

  • @MsTee-X71
    @MsTee-X712 ай бұрын

    Watching your videos as we’re looking at this year’s model and interestingly enough it now comes with a lagun table. Just wish it was wider. The microwave is now also a convection oven so no need to bring an extra oven, and they now include an outside gas griddle. The battery box is exactly the same tho so that’s a needed mod. I appreciate you sharing your previous experiences.

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    Ours did have a convection oven as well as the outside griddle. It’s nice that they now have a lagun table!

  • @trevorleeanderson
    @trevorleeanderson2 ай бұрын

    Thanks for sharing 💪🏼

  • @smfmotors
    @smfmotors2 ай бұрын

    Thank you for this!! I have put off installing these for two years 😂 Today I was forced too in order to run wiring for my Ovrlnd Camper. Still have all my fingers!!!!

  • @UrbanArmed
    @UrbanArmed2 ай бұрын

    Great video bro. I’m in southern Colorado, have a 22 summit and have been looking for an easy mind for measuring the water. Super helpful! Cheers bro.

  • @ProjectBasecamp
    @ProjectBasecamp2 ай бұрын

    Thanks for checking it out!

  • @Lpotter86
    @Lpotter863 ай бұрын

    Just did this in my 19FD worked great. Thanks!

  • @BradKoester
    @BradKoester3 ай бұрын

    Awesome lights! I will be adding this to my awning soon. Thanks for the video!

  • @thistediouspath
    @thistediouspath3 ай бұрын

    Oh, great.. Now I have another project. Thanks for providing a guide and including the materials list. Also thanks for leaving your mistakes in the edit so I don't make them, too!

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    Hah! There is always a new project to do! Thanks for the kind words!

  • @basecampcustomvans1096
    @basecampcustomvans10963 ай бұрын

    Great video. What is the brass fitting that you went from the hose to the unit?

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    If you are talking about the connection directly from the hose to the unit, it is the BPST to NPT adapter that I have listed in the description below the video.

  • @ig.awful_lot_of_mobile_washes
    @ig.awful_lot_of_mobile_washes3 ай бұрын

    Will it work for 2003

  • @DeanHenagan
    @DeanHenagan3 ай бұрын

    Great addition, thanks for posting the video of the process.

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    Thanks for watching!

  • @paulquiroz4070
    @paulquiroz40703 ай бұрын

    No A/C ? Cannot be use in florida…. And more than few other states….

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    Quite a few campers have the option for A/C these days, including small teardrops. Have you checked amazon for 12v air conditioners? They are pretty neat...

  • @connormuench9727
    @connormuench97273 ай бұрын

    Epic lol

  • @rmar7081
    @rmar70813 ай бұрын

    You lost me at Colorado.

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    Uh ok

  • @scottwesleymusic
    @scottwesleymusic3 ай бұрын

    Thanks for the video! One thing im really struggling with is the mcMaster Car part. I cannot for the life of me tell the difference between the BSP and NPT sides. I'm wondering if I was just sent the wrong part because I've done every single check possible and can't find the difference between the sides. I'm mostly wondering if this was an issue for you. How were you able to tell the difference?

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    BSP and NPT threads are angled differently. NPT threads are angled at 60 degrees where BSP are angled at 55 degrees. You should be able to thread the BSP side pretty easily into the propex. When did you get your Propex? There may be a chance that they now have a version for North America with the correct threads that you may now have.

  • @ScottHolt-xn8vj
    @ScottHolt-xn8vj3 ай бұрын

    I just got mine from van cafe like 3 weeks ago. Either side of my adapter screws in easily to the propex. I’ve not read anything about propex now using NPT but let me know if you’ve read that somewhere! I know that the NPT side is supposed to be at more of an angle but to the naked eye I can’t see a difference at all. I’m worried I’m going to damage the propex if I use the wrong side 😢

  • @lorelleindarsingh2259
    @lorelleindarsingh22593 ай бұрын

    Why doesn't mine come on?

  • @ProjectBasecamp
    @ProjectBasecamp3 ай бұрын

    From what I can tell, you have to hold the button which powers it on, and then you push the button again to change the levels.

  • @kenpettis3011
    @kenpettis30113 ай бұрын

    Send the freaking girls in the house for Christ’s sake!