Пікірлер

• 
  @greatdane51712 сағат бұрын

  Great video, very thoroughly done.

• 
  @livefreevinnie12 сағат бұрын

  Between 60K and 80K is the sweet spot for 3.5 ecoboost engine spark plugs replacement.

• 
  @lafinest472 күн бұрын

  where can i contact you? i have a situation with my rear breaks, i already went to ford service and they didn't know what was causing the noise, TIA.

• 
  @briandodson9476 күн бұрын

  What are the warning signs of this issue?

• 
  @andryvazquez79448 күн бұрын

  greetings ad good job 👌🏻

• 
  @majickmeg9 күн бұрын

  Do these calipers have the EPB? If so you don't need to put the car in service mode for the brakes?

• 
  @ccroson793511 күн бұрын

  I love everything that you say in your videos, but I would like to talk to you about the Ford transit brakes because I have a company like you work for and we’re running through brake pads like water about 20,000 miles is all you get out of brake pads on these transit is that the same thing you’re seeing? Is there anyway that I could talk to you? I am in Illinois and I know you’re in Oklahoma.

• 
  @amish_h4ck3r11 күн бұрын

  Do you have any videos on removing/replacing the alternator on a 3.7L transit? If not, do you have any tips/tricks you can share on doing so?

• 
  @erichg669312 күн бұрын

  Can you list the correct part numbers for those Jiffy-Tite connectors? I assume it's the same as the F150 but I want to be sure - Tasca says it doesn't fit my vehicle: BC3Z-6A968-C

• 
  @idistorres260613 күн бұрын

  Thamks❤

• 
  @russellfleet763613 күн бұрын

  I have drilled and installed grease fitting on both top and bottom arms.it really helps the bushings to last better.

• 
  @Jonathan1997hk-ln4yk14 күн бұрын

  I have just bought a Renault kangoo express. Lots of road noise from the back door and they close but at the top I can put my fingers between the doors if I fix this will the road noise disappear?

• 
  @mikefranks452815 күн бұрын

  Can you share the ftlbs torque on the lugnuts (wheel) for a 2019 transit 350 HD?

• 
  @mjr442816 күн бұрын

  Not smart to run bare hands in the parts solvent

• 
  @wojciechnowak832718 күн бұрын

  Hi question about differential oil . What type do u use. Bought rotors but guy couldn't tell me what oil I need . Is it standard for all transits?

• 
  @derekmcdougal26221 күн бұрын

  First video I have watched of yours and am a subscriber no bs kinda guy does quality work and shit talks as he does it my kinda guy

• 
  @Mgenius3321 күн бұрын

  You say 35ftlbs + 70° for the axle to hub bolts? Doesn’t Ford say 85ftlbs?

• 
  @cheeseymccheese724921 күн бұрын

  Mine was my ignition where the key goes in. I ended up get aggressive with the key trying to start it and it worked. Glad i didnt have to chase. New ignition is 60 to 100 bucks

• 
  @alexwalton184623 күн бұрын

  thanks for the help man

• 
  @chadturner9712Ай бұрын

  Next time you change the lower control arms on a ford transit I would be interested.

• 
  @scottt2012Ай бұрын

  I have some small stress cracks on the port side door and couldn't figure out why... 2+2 = now I see why. Thanks!

• 
  @tylerrencher5559Ай бұрын

  Thanks! We just bought a 2016 to haul the family and it needs some work. This was the first job done and it stopped the complaining!

• 
  @Fm-ud9zdАй бұрын

  you’re the best bro!!! 🎉🎉🎉

• 
  @GKMess42Ай бұрын

  Awesome - thank you for this video. I have a Ford Transit Connect minivan and the driver's side passenger door just started having issues with opening up. Door keeps sticking like it's suctioned shut. I'm betting it's this same issue with the height of the door.

• 
  @martyisabelieverАй бұрын

  caliper bolt with damper stud was on bottom...

• 
  @mcsport154Ай бұрын

  Where is your shop located sir 😊

• 
  @MikeReszkeАй бұрын

  My transit is prematurely downshifting. It’s a 2016 gas non turbo with 73k miles. If I need a new transmission what would I be in for paying for one?

• 
  @eddiehulse7066Ай бұрын

  Can you link that piston depress tool ?

• 
  @roldanmichel9106Ай бұрын

  We need to replace the gasket ??

• 
  @davidmarks4198Ай бұрын

  Great video. Wow i learned a lot. Thank you. Subscribed. i never have to watch another brake job video ever again.

• 
  @SkylerShawAeroАй бұрын

  FYI to anyone with the HD rear end like my 2020 AWD, you have a six lug pattern for both the rotors and the wheel axle hub bolts. The part numbers provided in the description here will not work. I found out after disassembling everything on Memorial Day while shops were closed; learn from my mistake. Also, the rotors are bolted on from the rear side, which doesn't appear to be the case in this video's version.

• 
  @macarthur71Ай бұрын

  I’ve got a 2015 3.5 NA and it’s been bullet proof. I don’t tow and haul much as mine’s more of a city boy truck so there’s that. It’s not going to win any races, but I will say that if I put my 3.5 NA in sport mode, it’s plenty quick.

• 
  @1Odama2 ай бұрын

  this van is clean as whistle ... nice to work with! 99.9999%of working vehicles are 99.999% than this one. And the brake pads well may be worn out and clean again ... easy and piece of fine swisse chocolate!!!! Although good and clear instructions how to do it right.... even better than Ford Australia ... a bunch of useless mechanics who know how to suck money!!! without deliverying knowledge and service!!! and as always ford parts are suckers of money for jam!!!

• 
  @thejimmyfo2 ай бұрын

  Is it ok to do this without replacing the wheel bearing hubs? They're an extra 100+ a side, and I'd like to skip them this time. I maybe missed it, but do you have the torque specs for the old-hub-to-new-rotor bolt specs?

• 
  @timbodnar67112 ай бұрын

  I watched a guy use exhaust manifold bolts through the two holes in the ball joint. Finished it off with a hammer. He didn't beat the threads or ball. Saved $600

• 
  @nextari2 ай бұрын

  great stuff Thanks!

• 
  @bigmarkymark96692 ай бұрын

  Would a manifold leak cause the same noise? 5.4 triton.. only squealing in a acceleration. 2500rpms and up

• 
  @jeffreycicero66852 ай бұрын

  Hey how long can I expect to spend on a spark plug replacement for a 2016 transit 150? If everything goes fairly smooth.

• 
  @chronicbullets67512 ай бұрын

  I really don't want to do this. Is exactly how I feel too.

• 
  @jeffmyers77482 ай бұрын

  Great video. Thanks !

• 
  @deanlongiii1612 ай бұрын

  I'm having this exact problem on my 2020 Ford Transit 350 with the EcoBoost where I am losing a lot of coolant I drive it highway miles and I also tow boats with it so it's running extra hot I just started having this coolant loss problem within the last 10,000 miles or so I had the system pressure tested and they said there's no leaks so I'm thinking it has to be one of these connectors that is the problem or more than one

• 
  @deanlongiii1612 ай бұрын

  Where is your shop located?

• 
  @prestonhorne38892 ай бұрын

  That's Great info on the Transits, I needed the info!

• 
  @WALLOWINGBULLS2 ай бұрын

  Well done

• 
  @karenectomy2 ай бұрын

  Thank you. Appreciate you making it possible for us to DIY/not get ripped off!

• 
  @user-og7il2wf3w2 ай бұрын

  @user-og7il2wf3w 0 seconds ago had ford dealer install a new f 150 oem windshield. the smell is so bad you cant barley drive truck. its a strong chemical smell. outside shop that did the work says they cant smell anything and I'm only one ever to complain. They also say they don't urethane, epoxy or primers, but something new like spray cans for glue? says he wont replace it again cause his method will be the same? what should i do?

• 
  @todd46103 ай бұрын

  I have a 2010 ford f-350 6.4 the oil light will come on when an adult and when I drive it goes away just started doing that after I change the oil in it can I put a new oil filter on it not that the oil pressure sensor would be it but it's still on one person told me it was the oil filter I took the oil filter out put the cap back on and start it and the oil black is still coming on

• 
  @jamesward57213 ай бұрын

  Anyone who does Toyota Landcruiser rear brake jobs lols at anyone who believes this is a difficult brake job. These are straightforward. Landcruiser rear brakes are a test of character, patience & your keyhole surgery ability.

• 
  @LawrenceL10003 ай бұрын

  Love your videos! Any footage of knock sensor replacement on these transits?

• 
  @football7cr3 ай бұрын

  Thanks