Your Transit service videos are a huge value added to the community. Thank you for sharing so many of the repairs that you do.

@AJourneyOfYourSoul

2 жыл бұрын

Absolutely. Thank you!!!

Thanks for putting out these videos.I have three transit 250 . An there almost no videos worthy of watching but yours

When I was taking off the rear bolts, one of the captured nuts inside the frame came loose and was spinning. Made the job really fun. Thanks for your videos, it really helped me while doing the transmission fluid and filter/rebuilding most of the front end parts.

@medtec6747

2 жыл бұрын

Sorry to hear that I know that's going to happen to me especially as they keep getting older. Luckily in Oklahoma rust isn't a huge issue

@adamkington

2 жыл бұрын

Med Tec67 There was actually no rust. It’s lived it’s life in Arizona and Southern California. The other bolt actually came out fairly easy, no problems. I thought this one was the same way until I noticed the nut spinning. I had to wedge a pry bar against the nut to loosen and tighten the bolt, luckily it worked.

@medtec6747

2 жыл бұрын

Ain't that a bitch glad you got it out

If it wasn’t for the seized bushing issue, getting that k-frame out would be really straight forward. Thanks for putting up the videos. Can’t wait to see the others.

@medtec6747

2 жыл бұрын

Yup if they just put on some anti seize at the factory this job would be super simple

beautiful work!

Im doing the exact job at home my truck is from up north and pretty rusted out. broke a whole bunch of bolts from the sub frame. The same thing happend to the control arm bushings i had to replace the whole sub frame . Also doing timming chains and phasers

@medtec6747

2 жыл бұрын

Damn that sounds like a chore and a half good luck sir

I'm literally doing this right now to a 2020 transit in my shop and was going to use the pressure and weight from the subframe to separate the lower ball joints. Also hoping you have good luck with the subframe bolts

Thanks for this video. it helped me a lot dropping the rack and pinion. Do you have a video on how to bleed the system for the rack and pinion? thanks again

I have a transit t250. The steering has hard spots.. any tips to look for? Thanks

Does the 2010 ford transit and 2010 ford transit connect use the same rack and pinion?

Note to self, don't buy a Ford transit if I ever buy another van. I think I'm sticking to a chevy express even if it only comes in a low roof model. The next one I want is a 2.8l diesel, but might have to sacrifice the mpg for a gas model that can handle winter temps in Michigan.

What is the numeric keypad on the driver's knee bolster for?

@medtec6747

2 жыл бұрын

Street eagle monitoring system

So should I just sell my 2019 transit before it gets bad 😅

I really don't want to do this. Is exactly how I feel too.

What's the name of that blue clip you used to block the steering hose?

@medtec6747

11 ай бұрын

its a kit from matco its there line block off kit

How is the cost for that

Transmission slipping already at 110k?!!

New bolt

Bro talks too much🫤