Пікірлер

• 
  @e.taylor65204 күн бұрын

  I honestly just did what another person did in their video and dropped the white ink as is. They made that technique work but it failed for me. I didn’t know the white was supposed to be mixed separately with resin first-then added!!

• 
  @JOTZdesigns4 күн бұрын

  To achieve this technique, and the similar flower method, you do want to add the white (alcohol ink or paste) to resin before adding it for sure. If you want the petri effect, that's when you drop the white alcohol ink onto your piece after dropping colored alcohol ink. I'm glad you found this video useful! 🧡😊 Thanks for watching!

• 
  @RitaMontalcini-mt7ki5 күн бұрын

  Sto cercando di ordinare la lampada uv avance i coloranti per resina e il kit stampi per gioielli e il kit iniziale,ma non trovo come posso fare mi potete aiutare anche perché devo vedere i prezzi,grazie

• 
  @JOTZdesigns3 күн бұрын

  I don't know what country you're in, but if you do a search for Let's Resin you can find out if they deliver to your country. You can also find them on Amazon. Prices may vary. Hope that helps! Thanks for watching!

• 
  @RitaMontalcini-mt7ki2 күн бұрын

  @@JOTZdesigns meno thenks I live in Italy near Turin,in Chieri.

• 
  @JOTZdesigns2 күн бұрын

  Definitely search on Amazon for Let's Resin!

• 
  @carolynbrew37706 күн бұрын

  Beautiful and good teaching ❤ thank you subscribe

• 
  @JOTZdesigns4 күн бұрын

  Thank you! 🧡😊 Thanks for watching and subscribing!

• 
  @phoenixankaa7 күн бұрын

  Gorgeous!

• 
  @JOTZdesigns7 күн бұрын

  Thank you! 🧡😊 Thanks for watching!

• 
  @YemsirachFikade8 күн бұрын

  it's nays. Can I Gate the molds

• 
  @JOTZdesigns8 күн бұрын

  Thanks! The mold, and other products are listed in the video description. You can find most products I use on Amazon. Check out my Amazon shop! Thanks for watching! www.amazon.com/shop/jotzdesigns

• 
  @paolasettantatre9 күн бұрын

  tutte ste parole per tirare fuori queste cose? :'@

• 
  @JOTZdesigns9 күн бұрын

  I'm sorry, with the translation I do not understand your question. Could you rephrase it? Thanks for watching!

• 
  @hitoshi_shinsou180610 күн бұрын

  Hi my entire piece hardened except the bottom I was think maybe it didn’t get enough air but I don’t know what to do now

• 
  @JOTZdesigns10 күн бұрын

  Hi! Can you give a little more detail please so I know I'm understanding what happened correctly. In the bottom, do you mean where the piece(s) you were creating a mold of was?

• 
  @randa102420 күн бұрын

  These are beautiful! Thank you for the sharing your technique! Is the small nail brush just from leftover gel clear coat? That seems so much easier than using a toothpick!

• 
  @JOTZdesigns20 күн бұрын

  Thank you! Happy to share! The brush is from an empty bottle I got from Amazon that I added the UV resin to. I have links listed in the video description for the products I used. You could use any old gel bottle, so long as it's black and throughly cleaned with isopropyl alcohol. I wouldn't recommend adding the UV resin to other types of UV resin in the bottle, including gel polish. ☺️🧡 Thanks for watching!

• 
  @dorothymitchell771Ай бұрын

  They were very beautiful I am going to try working with resin to day. thank you

• 
  @JOTZdesignsАй бұрын

  Thanks! I hope your project goes as you hope! 🧡☺️ Thanks for watching!

• 
  @GodsChild77_Ай бұрын

  What do you do with these?

• 
  @JOTZdesignsАй бұрын

  Give them to friends and also sell them. ☺️ Thanks for watching!

• 
  @pepethepatriot752427 күн бұрын

  Nothing. They are for lazy jewelry designers who are too lazy to actually make them into a proper pendant. So sad.

• 
  @JOTZdesigns27 күн бұрын

  @pepethepatriot7524 Not everything needs to be jewelry. Creating things with resin isn't limited to one purpose; people can make whatever they want. It's unfair to label them as lazy just because their work doesn't align with your expectations.

• 
  @cristinateodora11Ай бұрын

  Beautiful 😍

• 
  @JOTZdesignsАй бұрын

  Thanks! 🧡😊 Thank you for watching!

• 
  @LISA-gv5yoАй бұрын

  Eu fiz o meu jesmonite caseiro! Não cheguei a experimentar esses! O meu é bom, é brilhante como cerâmica, suave, mas só aceita cores pastéis! É feito com gesso pedra, hidrofugante, caucita, e água! Fica impermeável, o que eu adoro! O que me faz pensar ...porquê esses não contem hidrofugante? Jesmonite, resincrete, não são a prova d'água!

• 
  @JOTZdesignsАй бұрын

  That’s a good question! It would be great if they were waterproof! 🤷🏻‍♀️🧡😊 Thank you for watching!

• 
  @MelissaK307Ай бұрын

  Beautiful job

• 
  @JOTZdesignsАй бұрын

  Thanks 😊🧡 Thank you for watching!

• 
  @chantalc.5708Ай бұрын

  👏👏👏👏👏👏

• 
  @JOTZdesignsАй бұрын

  Thanks! 😊😊 Thank you for watching!

• 
  @shirleylouisemahoney3498Ай бұрын

  My god. How messy are you You wouldn't have to cut the bits off if you were more tidy pouring

• 
  @JOTZdesignsАй бұрын

  Honestly, I am rather tidy compared to many others. I don’t mind cutting if needed, not everything is perfect, but if you feel the need to be perfect be my guest! Besides, if you are tidy with this technique you will most likely get very large blobs in the pieces, so it is better to be messy! 😁Thanks for watching!

• 
  @helloitisme4280Ай бұрын

  @shirleylouisemahoney3498 What a rude comment! Wow. Not everyone is as anal as you apparently are! 😂😂😂🤦‍♀️🤪

• 
  @SaskiaSmitArtАй бұрын

  It is supercute❣️

• 
  @JOTZdesignsАй бұрын

  Thanks! Easy to make, and make great gifts! 😊🧡 Thank you for watching!

• 
  @SaskiaSmitArtАй бұрын

  They are beautiful ❤

• 
  @JOTZdesignsАй бұрын

  Thanks! Super simple, but pretty! 🧡😊 Thanks for watching!

• 
  @SaskiaSmitArtАй бұрын

  I love it!

• 
  @JOTZdesignsАй бұрын

  Thanks! 👍😊 Thank you for watching!

• 
  @NighthawkMeowАй бұрын

  I love the powder- adds a nice touch!!! That black is really shiny! So nice!

• 
  @JOTZdesignsАй бұрын

  Thanks! I love how the powder turned out! 🧡😊 Thanks for watching!

• 
  @GinaBeana_TootsieАй бұрын

  Nice Elisa this black resin is beautiful shinny and dark came out great 😊💜💋🐈‍⬛

• 
  @JOTZdesignsАй бұрын

  Thanks Gina! I like how it turned out! 🧡😊 Thanks for watching!

• 
  @helloitisme4280Ай бұрын

  Turned out great! Love the colors together and it is a very nice black! 😍😍

• 
  @JOTZdesignsАй бұрын

  Thanks for watching! 😊❤ Please like, sub, & comment! Links for products and discounts in the description!

• 
  @eva1tori7232 ай бұрын

  Cool

• 
  @JOTZdesignsАй бұрын

  Thank you! 🧡😊 Thanks for watching!

• 
  @stacikspencer2 ай бұрын

  The hot glue doesn't stick to the back of the heart when someone peels it off?

• 
  @JOTZdesigns2 ай бұрын

  The glue peels off the heart as well. Because of the heat, if you haven’t let the resin cure for 30 days you might get an indent/mark, but that can be removed with a heat gun. If you don’t want to use hot glue you can use removable adhesive dots like these (linked below), but they’re not very strong and the hearts can easily fall off the card. Thanks for watching! amzn.to/3UmCcHq

• 
  @stacikspencer2 ай бұрын

  @@JOTZdesigns okay Thank you!! 😀

• 
  @linseydiggett7472 ай бұрын

  Hi, these are lovely. Can i ask what mould you used please? X

• 
  @lmullen94782 ай бұрын

  I CRINGE when I hear women endorse Hobby Lobby!!! The family owned, "christian" organization was the FIRST ones to initiate a lawsuit (and won) AGAINST women's right to affordable access BIRTH CONTROL PILLS ! They didn't want their health insurance to have to cover that for their female employees!! OMG!! I REFUSE to give them one dime of my money in support of all women of childbearing age...and neither should YOU, nor the men who love them.

• 
  @wendybond28482 ай бұрын

  Lovely but the video was a bit fast for me. I missed why you had to paint them again with resin after they partially cured.

• 
  @JOTZdesigns2 ай бұрын

  I’m not sure exactly what you mean. Do you mean the UV resin I used to seal the backs? That’s the only time I added additional resin, but the pieces were cured when I did that. I mention I’m using the UV resin to seal the backs at 5:20. If videos are too fast for you, you can slow the speed down by click on the gear icon when you tap the video and change playback settings. You can also turn on the CC (closed captions) if what is said is too fast or an hard to understand. Hope that helps! 😊🧡 Thanks for watching!

• 
  @mimikhan95462 ай бұрын

  ❤.

• 
  @JOTZdesigns2 ай бұрын

  Thanks! 🧡😊 Thank you for watching!

• 
  @rosanneshale9232 ай бұрын

  Love them all especially the pink ones for earrings and pendant

• 
  @JOTZdesigns2 ай бұрын

  Thank you! 🧡😊 Thanks for watching!

• 
  @margaretslater13542 ай бұрын

  Love it. Thanks for sharing

• 
  @JOTZdesigns2 ай бұрын

  Thank you! 🧡🙂 Thanks for watching!

• 
  @shirleylouisemahoney34983 ай бұрын

  Useless this one I got mine yesterday and it wont even pour out of the bottle Would not recomend this one

• 
  @JOTZdesigns2 ай бұрын

  I’ve heard that has happened with several types of UV resin, but I’ve never experienced it. It typically is an issue with the bottle, how it was shipped/stored, bad batch, etc. I’d recommend contacting JDiction directly (website, FB, IG) and let them know. Thanks for watching!

• 
  @FerdyZanotto3 ай бұрын

  Amazing video!!! I'm just curious about something and I hope you can answer this question to me. Is it possible to cure this kind of resin if it is CLOSED inside a clear container? Tks !

• 
  @JOTZdesigns2 ай бұрын

  Yes, UV resin can be curd inside a closed clear container, but keep in mind that due to shrinkage of the resin while curing it may affect the container/project overall, depending on the container itself. Thanks for watching! 🧡🙂

• 
  @ameerael-youssef83803 ай бұрын

  Really very nice ❤

• 
  @JOTZdesigns3 ай бұрын

  Thank you! 🧡😊 Thanks for watching!

• 
  @user-wj2oj8te5h3 ай бұрын

  How much

• 
  @JOTZdesigns3 ай бұрын

  Could you please clarify? How much of what?

• 
  @MikeAnderson-jd2rw3 ай бұрын

  I like the backs of them better. :)

• 
  @JOTZdesigns3 ай бұрын

  I am often torn between which I like better, but that’s why I like putting clear in the back instead of a solid color so that both are still visible! 😊🧡 Thanks for watching!

• 
  @soniacintronjohnson3 ай бұрын

  How do you like the double sided lamp? Does it cure both side at the same time? Does it stiil work good?

• 
  @JOTZdesigns3 ай бұрын

  I love it! It does cure from both sides, for things like open bezels on clear tape or translucent molds, and it’s nice to have the option of just using one side if needed, or doubling up on things when adding a second power cord and using both sides individually. Very portable, too! The only thing I’m not fond of, and every light has this problem, is that it’s not fully enclosed so usable light escapes. That’s easily solved by placing aluminum foil over the openings, though (and underneath the piece(s) if using only one side of the light). It still works great! Don’t forget to use the discount codes in the description if you decide to get one! Codes for both their website and Amazon are available! 😊🧡 Thanks for watching!

• 
  @Nnurse5153 ай бұрын

  I have a nail UV light can I use that?

• 
  @JOTZdesigns3 ай бұрын

  Most nail lamps can be used, but depending on the wattage it could take longer to cure. Something you’ll have to test with the lamp you have. Hope that helps! Thanks for watching! 🧡🙂

• 
  @hjapheth3 ай бұрын

  Hi, is this food grade?

• 
  @hjapheth3 ай бұрын

  or whats the max temperature it can withstand?

• 
  @JOTZdesigns3 ай бұрын

  Hi! I do not see anything on their website that indicates an answer to your questions, and I am awaiting a reply from Let’s Resin. I will let you know what I find out.

• 
  @JOTZdesigns3 ай бұрын

  @hjapheth Let’s resin does not recommend the silicone rubber for food use. Heat max is 428°F/220°C. Hope that helps!

• 
  @GaryMcKinnonUFO3 ай бұрын

  Lovely.

• 
  @JOTZdesigns3 ай бұрын

  Thank you! 🧡😊 Thanks for watching!

• 
  @miriamluskberry3 ай бұрын

  Absolutely beautiful

• 
  @JOTZdesigns3 ай бұрын

  Thank you! 🧡😊 Thanks for watching!

• 
  @taminlove2003584 ай бұрын

  Thanks i was wondering if i could just use my white alcohol inks as the sinking 😊

• 
  @JOTZdesigns4 ай бұрын

  Thanks for watching! 🧡😊 Keep in mind that not all white alcohol inks are created equal and will work. If you have something besides Pinata Blanco Blanco I’d recommend doing a test run before any important projects.

• 
  @GaryMcKinnonUFO4 ай бұрын

  Very cool indeed, i learned half a dozen things just from this one video! Thanks from a beginner, liked and subbed :)

• 
  @JOTZdesigns4 ай бұрын

  I’m glad it was so useful for you! 🧡☺️ Thanks for watching and subbing!

• 
  @GaryMcKinnonUFO4 ай бұрын

  Thanks for taking the time to do all this and show us, great demo. I've noticed that when some artists are showing cells using silicone oil that the cells expand rapidly, so there must be different reactions depeding on the pigment type that's used. Liked and subbed :)

• 
  @JOTZdesigns4 ай бұрын

  Happy to share! From my experience, the only thing that makes the cells expand more rapidly would be low viscosity (thinner) resins, or the video being sped up. How it is applied can make a little bit of difference, but that’s more the effect rather than speed. Thanks for watching and subbing! 🧡☺️

• 
  @GaryMcKinnonUFO4 ай бұрын

  @@JOTZdesignsAh that makes sense, thanks.

• 
  @KarenYauney4 ай бұрын

  WONDERFUL!!❤

• 
  @JOTZdesigns4 ай бұрын

  Thanks! 🧡☺️ Thank you for watching!

• 
  @mkfranklin21794 ай бұрын

  I just love them! So much fun to do. My hearts always stick to the silicone even when i dont use a heat gun! Ugh

• 
  @JOTZdesigns4 ай бұрын

  Thanks! Are you using any other source of heat, or warming your resin in any way? Could just be the mold is past its prime. Thanks for watching! 🧡☺️

• 
  @Bonnie-bf5hu4 ай бұрын

  Great tutorial - Thank you. How can i order the Double Sided UV Light - I have used every search word I can think of - Thank you. Bonnie

• 
  @JOTZdesigns4 ай бұрын

  Thanks! You can always find links in the video description for products I use. Here’s the links to the lamp. Thanks for watching! 🧡☺️ UV lamp Let’s Resin double sided -Amazon - Code: ELSA2410 amzn.to/3vjzbPP -Website - Code: JOTZD USA - letsresin.com/?ref=JOTZdesigns& UK - letsresin.co.uk/?ref=JOTZdesigns Canada - letsresin.ca/?ref=JOTZdesigns

• 
  @tanujain71334 ай бұрын

  Its so much informative 😁 Thanks for sharing the vedio , i have one question if we don't have this silicone oil then is there any substitute for this? Would you please assist me 😊

• 
  @JOTZdesigns4 ай бұрын

  Thanks! Silicone oil is certainly unique and I haven’t come across anything that gives the same results. It’s very easy to find, though. Any hardware store/department will carry it, and it’s generally cheap. 🧡🙂 Thanks for watching!

• 
  @tanujain71334 ай бұрын

  @@JOTZdesigns Thank you so much for your response ☺️☺️ I will search here in hardware shop 👍 one more question if I want to give waves cell effect so can I mix few drops with white opaque pigment and resin it will work?

• 
  @JOTZdesigns4 ай бұрын

  @tanujain7133 you’re welcome! For waves, silicone oil is not the way to go. You’ll want to use a white resin paste and blow it out with a hair dryer or heat gun. I’d recommend a hair dryer, though. Heat guns apply a lot of heat and you run the chance of the resin becoming too liquidy and you lose the cells. For the pastes, I love using the whites from Le Rez (purchased through Laura’s Art Corner) and Dryer Days. You can find links and discount codes in the description. In the video I linked below, I use System Three from Amazon and there’s a link for that under the Colors section of the description of that video. Check out what I do at both 2:00 and 9:54 (separate layer) in this video and you’ll see what I mean about using a hair dryer. kzread.info/dash/bejne/eWxqs9KtlbrRerg.htmlsi=KO9K8FbYRDGefynP

• 
  @tanujain71334 ай бұрын

  @@JOTZdesigns so nice of you ❤️😍 thank you so much for your assistance 🙏😊

• 
  @JOTZdesigns4 ай бұрын

  @tanujain7133 happy to help! 🙂

• 
  @yvonne19601004 ай бұрын

  echt prachtig!!!

• 
  @JOTZdesigns4 ай бұрын

  Thanks! ♥️🐾 Thank you for watching!

• 
  @Gretchens4 ай бұрын

  Thank you this is a great idea. I been having this problem for a long time and used wood sheathing to support the cavas. I like the idea so you can color the resin for an added fun. Thank you

• 
  @JOTZdesigns4 ай бұрын

  Canvas sag is the worst!! I have another video with more of cost savings option, if you’re interested. Thanks for watching! 🧡☺️ kzread.info/dash/bejne/aKJnu8yAnNGoiZc.html

• 
  @kentgulley52595 ай бұрын

  Is this food safe when finished? Also what is the purpose of adding paint ? can you just swipe the colors?

• 
  @JOTZdesigns5 ай бұрын

  “Food safe” resin is only incidental contact, not something you can eat from. I tell anyone that purchases my boards to use the resin part only for things like crackers or decoration only. That’s the reason I NEVER cover an entire board, otherwise it’s a waste of a good cutting board. You never want to cut food in resin. The oil in the paint helps create cells. You do not achieve the same results without it. Thanks for watching! Check out my Swipes playlist for more! kzread.info/head/PLx7Pf5A8e8pyNAq1YJxN2HapHTyT9Bi77&si=CodQqXFShEdtucLH