Eco Friendly Resin Alternative | ResinCrete from JDiction
Тәжірибелік нұсқаулар және стиль
Hi! Welcome to my channel!
In this video I will be using JDiction's new ResinCrete.
LINKS TO MY SOCIAL, PRODUCTS USED, DISCOUNTS & MORE ARE LISTED BELOW!
If you have questions, please let me know in the comments! Please click the thumbs up and subscribe button, and click the bell to know when I upload videos!
Thanks for watching!
Elisa
(pronounced EE-leesah)
😊
#resinart #fluidart #homedecor #functionalart #learntoresin #resinartist #pourart #diy #crafting #epoxy #abstract #expert #howto
*****************************************
SHOP - SUPPORT - SOCIAL MEDIA
*****************************************
If you would like to see my gallery, want to help support my channel and keep it going, and/or get to my social media, check out this link!
linktr.ee/jotzdesigns
ALL help is greatly appreciated, and goes back into making videos for you!
**************
DISCOUNTS!
**************
Dryer Day's Art Studio
Discount Code: JOTZD (Does not include boards)
www.dryerdaysartstudio.com/
********
JDiction
Discount Code: JOTZ10
jdiction.online/?ref=ibdxu5e75h
KZread @JDiction Epoxy Resin
Instagram @jdiction_officials
TikTok @jdiction_official
#jdictioncrafting
********
Into Resin
Discount Code: JOTZ10
www.intoresin.com/?ref=03rfcx...
********
Laura's Art Corner (Le Rez Expressions)
Discount Code: JOTZ10%
laurasartcorner.net/
********
Let’s Resin
Amazon
Discount code 1 (liquids/powders): ELISA2024
Discount code 2 (molds/tools): ELSA2410
amzn.to/3NM6vW1
Let’s Resin website code - JOTZD
USA
letsresin.com/?ref=JOTZdesign...
UK
letsresin.co.uk/?ref=JOTZdesigns
Canada
letsresin.ca/?ref=JOTZdesigns
********
NicPro
Discount Code for epoxy: Elisa10% (NicPro site only)
nicpro.com/
amzn.to/3trOWDd
********
Washi Tape Store
Discount Code: JOTZ10
www.thewashitapeshop.com?aff=1330
**********************************
PRODUCTS & SUPPLIES USED
**********************************
I get many of the products I use from Amazon, and I have them (and more!) listed in my AMAZON SHOP! Check it out, there's a LOT, and I'm always adding more!
amazon.com/shop/jotzdesigns
**PRODUCTS NOT FROM AMAZON**
If you don't see something in my Amazon shop, or listed below, please let me know in the comments, and I'll get you the information if I can!
__COLORS__
Epoxy Candy - Copper GoldLeaf - epoxycandy.com
Dryer Days Art Studio - Code: JOTZD - Mermaid's Dream - www.dryerdaysartstudio.com/
FolkArt Ultra Dye - amzn.to/3frNSq1
Jacquard Pinata Alcohol Ink - Code: ELISA20 at checkout! - www.theepoxyresinstore.com/co...
Mica powders - JDiction - amzn.to/3IYNlu5
__SUPPLIES__
Cups - 9oz - amzn.to/3rtHMeL
Metal scoops for powders/glitters - amzn.to/3uRQeTB
Mold - Silicone Round Coaster - amzn.to/3KJl4c3
Molds - Dryer Days - Discount Code: JOTZD - www.dryerdaysartstudio.com/sh...
Molds - Jessama Design - www.etsy.com/shop/JessamaDesi...
Mold - Silicone Butterfly - www.michaels.com/product/butt...
Resincrete (JDiction) - amzn.to/3ZlXBBV
Scale sm - amzn.to/363houW
Scale lg - amzn.to/3JoYBjJ
Silicone Whisk - amzn.to/3xSQzJ6
Wood Craft Sticks - Jumbo - amzn.to/2HotLqS
Wood Sticks - Bamboo skewers - amzn.to/35RPK3r
***************************************
As an Amazon Influencer, and Affiliate of those listed above, I earn a tiny bit from qualifying purchases at no additional cost to you! By making a purchase using the links and discount codes above, you help me grow as an artist!! Those companies will give me little something back as a thank you for sending you their way, which in turn helps me keep my channel going!
**My videos are to show how I like to create my art and crafts and the materials I like to use or test. Follow all safety instructions from the manufacturers, as I can not be held liable for your safety.
***************************************
MUSIC:
Too Far From Home - Wondershare Filmora stock
Teardrop Sky - Wondershare Filmora stock
Пікірлер: 63
Thanks for watching! 😊❤ Links for products and discounts in the description!
Thank you for sharing!
@JOTZdesigns
Жыл бұрын
Happy to share! Thanks for watching! 🧡☺️
I am so glad I saw this before ordering it.
@JOTZdesigns
Жыл бұрын
I’m glad you found it useful! 🧡☺️ Thanks for watching!
One more thing-- yes, as you noted, Resincrete has to sit and cure for 2-3 days (like most 'cretes') to release some of its moisture so colors become more vibrant (and acrylic paint, as you noted, works well) and the item gets stronger. I've also had great success with painting mine, and sealing after painting.
@JOTZdesigns
Жыл бұрын
Thanks for the info! What is your favorite sealant? I’d like to seal the ones I make for my plant cover pots. Thanks for watching! FYI, I like your name! And as sad as I was when I saw it, it did bring me comfort because I was notified of it when I was putting my dog Tator down (he was the sweetest 15.25 yr old Rottie mutt one could ask for!).
@tatortot6776
Жыл бұрын
@@JOTZdesigns Oh! My little dog was TatorTot too! She was 18.5 when she passed- my little soul mate. I sooooo know how you feel. My heart goes out to you and I'm so sorry for your grief. I'm currently using Clark's Slate and Concrete Wax. ($16.95 a container) It smells faintly of orange, goes on SO smoothly and is earth friendly. I've made both candles and little flower pots out of my resincrete vessels and this sealant works very well. Strongly suggest watching Jai Catalano's review of 17 concrete sealants on his UpVibe channel. I'm going to be trying a different product (Hydrostone) because it's less expensive than Resincrete. Will let you know!
@JOTZdesigns
Жыл бұрын
I’ll look into the sealants, thanks for the info! Losing one’s fur baby is certainly tough! They definitely leave a mark on your heart! Thank you for the kind words. 🧡😭💔
Thank you!! I just got mine in this week but hadn't had a chance to try it out yet. I think I will get some different colorants before trying it out now. I really appreciate you making this!
@JOTZdesigns
Жыл бұрын
I’m glad it was helpful for you! I love that you can get projects done in a day with this! Thank you for watching! 🧡☺️
Very nice Elisa I didn’t know epoxy came I order form but is seems that is not a good thing thanks for sharing 😆💜😺🐾🐾🐈⬛💋
@JOTZdesigns
Жыл бұрын
Thanks for watching, Gina! 🧡☺️😘
You can add a bit of extra water to make the set time longer per JD instructions. I also purchased the Resincrete pigments which work better at not offsetting the color by the white of the powder. I tried acrylic paint, mica powder and resin cream color first but got very washed out color and poor mixing. What ever you use, mix color with water prior to putting in powder. I love resincrete. ❤😊
@JOTZdesigns
8 ай бұрын
I hadn't heard of adding the color to the water first, thanks for the tip! Thanks for watching!
U r amazing... U explain so well... Thank you for Yr time
@JOTZdesigns
5 ай бұрын
Thank you so much! Comments like these keep me going! 🐾🧡 Thanks for watching!
I totally wished I had watched your video before I tried it! I measured the resincrete by weight and the water by volume, so I had a big wet mess! I misinterpreted what the instructions called for. It was relatively easy to clean up, and I'll try it again later! Thanks for your video!!!!
@JOTZdesigns
9 ай бұрын
I’m glad you found it useful! 🧡☺️ Thanks for watching!
Haha so funny inye
@JOTZdesigns
Жыл бұрын
Thanks for watching, Mona! 🧡☺️
I purchased this ResinCrete through amazon n after watching your video I’m not too impressed with it. First of all I don’t have a scale. Not impressed with the directions either. I think I wasted my money on it. I appreciate your video n enjoyed some knowledge about this stuff. Thanks so much in sharing this information. ♥️😊👍
@JOTZdesigns
6 ай бұрын
It’s not a product for everyone, that is for sure! 🧡☺️ Thanks for watching!
If you want the butterflies to be intact 1. Wait 1 day before demolding AND 2. Add bit extra resincrete on top. This will make it thicker and stronger
@JOTZdesigns
8 ай бұрын
Thanks for the tips! Do you know of a way to determine how much you need to mix to get certain volumes? 🧡☺️ Thank you for watching!
@libbyannbest1723
8 ай бұрын
@@JOTZdesigns No. What you should do is put disposable 3 or 5 (?) ounce bathroom paper cups on scale. Tare at zero before you add stuff. Add proper measurement of powder to one cup and mark with marker. Remove from scale. Place 2nd cup on scale and tare at zero. Add water to second cup and mark with marker. Then measure with water using actual measuring cups to determine how many ounce in volume you get and multiply as needed. Please note: When you add bit extra resin crete to antanna of butterfly, you will not get a "clean" string. Rather, the strings will appear raised against the extra resin crete, but at least it won't break off. I do this with arms and legs of people and animals.
@JOTZdesigns
8 ай бұрын
Thanks!
Thank you for the video. Very informative. Seems a bit to persnickety for me. Found the color change with the dye fascinating though. Looks to be the benefit is to get the soft finish of the resin with the structure of the cement. Wonder if the color will change over significant time as do resin products.
@JOTZdesigns
Жыл бұрын
Thank you! I haven’t noticed any change in color yet. Maybe it depends on the types colors you use. I’ve had some resin items yellow quickly, and others still look like new years later, even using the same resin. Only time will tell! Thanks for watching! ☺️🧡
Hi this was helpful thank you! I'm curious how the butterflies stood up after letting them cure fully. Can you break them apart or are they strong? I'm interested in using ResinCrete for similar sized items but wouldn't want to if the material was too fragile.
@JOTZdesigns
Жыл бұрын
Glad it helped! 🧡☺️ Thanks for watching! After a few the butterflies (and seashell) still broke, but it did take quite a bit of effort. Certainly not like the same day or even the next day. If you’re using it for things like earrings, I’d recommend sealing them (a water-based sealant would be best) to help with wear and tear.
I couldn't find the mermaid dreams you used, but if it was a resin pigment paste, it is most likely not going to work well in this product. Pigment pastes typically have part a or part b resin in them and that is why they don't work well in products like this. Resin dyes also work terribly in products like this. Those products are specifically formulated for epoxy resin. It can also interfere in curing.
@JOTZdesigns
Жыл бұрын
The Mermaid’s Dream is a popular product, and looks to be currently sold out. She’ll have it back in stock soon, I’m sure! It is made for resin, and I read conflicting things on the use of resin pigments in this product, hence why I was testing it. I spoke with Katherine from Dryer Days, and the only difference between the Mermaid’s Dream and the Cream color, that I also tested off camera, is that the MD is more pigmented. The Cream color did as expected and didn’t mix well, and left pock marks on the backside with uncured pigment. I do not have any resin dyes to try out, but the resin tints I have didn’t work well. Resin inks worked fine. Sometimes testing is needed just to see! Thanks for watching! 🧡☺️ Here’s the direct link for the Mermaid’s Dream if you’re still unable to find it. www.dryerdaysartstudio.com/shop/p/jlpuv2hllwuv3z5d04sfp6bpx6zyut
@julierathe6661
Жыл бұрын
Their website says you can use any of those items with their product.
I used primary elements powder pigments and they got much darker as time passed. 1 to 2 days. They got splotchy and darker on edges. Also if you wet them to wet sand the pigment changes and comes out in the water.
@JOTZdesigns
8 ай бұрын
Interesting! Good to know, thanks! ☺️🧡 Thank you for watching!
Eu fiz o meu jesmonite caseiro! Não cheguei a experimentar esses! O meu é bom, é brilhante como cerâmica, suave, mas só aceita cores pastéis! É feito com gesso pedra, hidrofugante, caucita, e água! Fica impermeável, o que eu adoro! O que me faz pensar ...porquê esses não contem hidrofugante? Jesmonite, resincrete, não são a prova d'água!
@JOTZdesigns
Ай бұрын
That’s a good question! It would be great if they were waterproof! 🤷🏻♀️🧡😊 Thank you for watching!
Thank you for this video. I certainly will not be trying out ResinCrete.
@JOTZdesigns
Жыл бұрын
I’m glad it was useful to you. Thanks for watching!
Aqui no Brasil uso concret designer
@JOTZdesigns
9 ай бұрын
Hello! I haven’t heard of that one. Thank you for watching! 🧡☺️
🤗Thank you for your video. Could you put these pieces in a kiln?
@JOTZdesigns
Жыл бұрын
I don’t know if these can be put into a kiln, I’ve never used one. Is there a reason you’d want to? Thanks for watching!
@casade2831
Жыл бұрын
@@JOTZdesigns thank you.
Do 10 teaspoons to 3 ts of water? Or table spoons
@JOTZdesigns
Жыл бұрын
You have to measure by weight not volume. So it would be more like 10 ounces to 3 ounces, or 10 grams to 3grams, etc. hope that helps! Thanks for watching!
how do you work out the ration of your mold to this how much can you do it
@JOTZdesigns
Жыл бұрын
Honestly, I just guess. I haven’t quite figured out the best way to do it yet! I’m hoping someone can chime in and help out soon! Thanks for watching! ☺️🧡
@nayfleww
7 ай бұрын
@@JOTZdesigns I watched a video where you put the mold on the scale, Tare, fill the mold up with water, get that weight in grams and calculate your mixture from there with the 10:3 ratio
@JOTZdesigns
7 ай бұрын
@nayfleww thanks! I’ll have to try that!
@nayfleww
7 ай бұрын
Just tested, that is NOT the measurement. What I calculated is take the same weight and double that, then calculate the ratio. May not be exact, but we're getting there! @@JOTZdesigns
@JOTZdesigns
7 ай бұрын
@nayfleww thanks for letting me know! It’s so unfortunate that they don’t help in this at all on the package!
So this is white only ..not clear?
@JOTZdesigns
Жыл бұрын
Correct. Thanks for watching!
I wish I had watched this before I bought. Seems like a lot of trouble!😮
@JOTZdesigns
Жыл бұрын
It’s definitely not for every project. Comes in handy though when you’re doing some simple things like trays and more large solid pieces! Thanks for watching!
Thank you for sharing. I am glad I didn't order this.
@JOTZdesigns
Жыл бұрын
Happy to share! Not every product is for everyone! I definitely wouldn’t use it as a complete resin replacement, but it is great for many things, like my cover pots for plants! Thanks for watching! 🧡☺️