Been a few years since I studied chemistry, but going back to basics you ALWAYS use a full face respirator as fumes can irreparably damage your eyes. Also it's a sensible precaution to install an extractor fan into your mixing area as part of a belt & braces approach to deal with fumes
@rogsands564426 күн бұрын
My son just bought a house and needs this service. Lexington KY, any recommendations?
@baneotoole5370Ай бұрын
What size is your trailer ?? I just picked up a 12 x 6 for $1,500 Canadian,if you can believe that ?? A bit of a steal of a deal. I was stuck on what to do about the hose reels but you just solved it for me.
@Frank020Ай бұрын
Hi, I have a room where there was, to my knowledge, minimum puppy pee. I hit with chemicals. Then Zinzer oil base three times. Smell is still faint, but it is a chemical odor. to rework this I don't know if I must grind all the zinzer oil base down. Any suggestions. ( To my knowledge puppies pee downward and not against the wall, but I hit the drywall too with this same procedure. Can you please recommend something?????? I am willing to buy stuff but want to avoid the five figure bill for something I could hire if needed and just work the essential parts that I should not get involved in as a layman. Thanks ..
@WilliamJoseph20152 ай бұрын
There's got to be a simpler solution by now?
@davidwyatt82423 ай бұрын
Great video. Thank you for sharing.
@cvconnor3 ай бұрын
This is a great setup. Thank you for sharing. How about exhaust fumes in the trailer? Doesn't the pressure washer make a bit of heat and exhaust fumes?
@hamidmalik35383 ай бұрын
Whatever happened to you, I started watching your videos well over half a decade ago. Hope you are alright
@cfmill743 ай бұрын
How do you get to the gutters 30+ feet up?
@kendalledmo65244 ай бұрын
Hello, I am bidding on an apartment complex for post-construction cleaning services, however, I'm unable to clean the exterior second and third story windows. Would I just not bid on windows all together or just have a price for cleaning the inside of the windows?
@pedrocruz64325 ай бұрын
i would love to built a hose rack like that..
@user-xd4nb9dd7j5 ай бұрын
Where did you get these fittings?
@tdiler125 ай бұрын
Fantastic points… My bid for that 1st house is $1200 Us dollars thats right.. nice clean cash… You know that great point you made about the low E Blue tint windows. Those area a real nightmare and seems like they came around and kind of disappeared ?? as I dont run into them anymore and for that I am so grateful!
@michaelwilson4865 ай бұрын
What's that white spot on the left side of the siding?
@jobehayes84446 ай бұрын
2.5gpm 3700psi what would be the best tip for 20inch surface cleaner? I didn't know 20inch cleaner is supposedly to big for my machine...thankyou
@billybwebn6 ай бұрын
how many gpm is the avrage hose bib
@user-gp2lr6vr8v7 ай бұрын
what psi pressure washer where you using thanks
@rcman68957 ай бұрын
I listen to what you were saying to your videos about pressure no I don't know anything about pressure and how that's supposed to work I guess for right now I just want this Downstream injector to work if you don't know what your precious are can that damage the machine I was thinking about maybe not born the injector out maybe what I'll do is I'll just take the injector screw cut the end off of it take the ball and spring out and just use it like that at what time it seems to be working pretty good now not so much what do you think
@davidintili66478 ай бұрын
How come your hose wheels are on the back rather than the side I was thinking it would be a lot easier on the side you would have to run all your hoes out the back 100 feet and then come back so don’t you think it would be easier and more efficient to run them out the side
@briceworks33478 ай бұрын
I would charge $225.00 for that cleaning in 2023. (Single truck wash pricing)
@briceworks33478 ай бұрын
Great wash job!
@user-ok3kf8kl8v9 ай бұрын
Do you mind to share formula of what is in the bottle? I did hear water but also heard soap.
@TheJxsanchez2111 ай бұрын
What chemical did you use?
@GaryElliott40811 ай бұрын
What about waste water from surface cleaning?
@the40daybook71 Жыл бұрын
BEST video I've watched on this subject...GREAT JOB
@kashi2843 Жыл бұрын
Nice video - 4:29 what about cleaning the hose of all cutting debris?
@suzuki400sm Жыл бұрын
Long time no videos
@577buttfan Жыл бұрын
Freakin awesome interesting video man!!Wow about a 1/2 gal a minute pretty badass!
@dncprncss Жыл бұрын
What tools are being used?
@chenz53 Жыл бұрын
What do you use in your foam cannon?
@mariagrimaldo6691 Жыл бұрын
What the point in u making this video with u telling us the solution you using, you’re not helping nobody but yourself stop making these videos if you’re not telling nobody the solution you’re using specially for some of us that are new in this kind of business
@Dtluta77 Жыл бұрын
Great explanation 👍🏾
@user-be3fn8vx8r Жыл бұрын
If you are running 8gpm 3500 psi 4 tip bar what tips would you suggest I don't fell my 28" is cleaning as well as it should. Thanks for your videos
@bradleys6600 Жыл бұрын
Sorry to be picky, but you last 2 numbers are absolutely not the gpm it is your orifice size. 40050 is 40 degree tip with a 5.0 orifice. 5lindustry standards say that 5.0 orifice is 1.45mm. Your math is right with 2 nozzles at 5.0 orifice with 8gpm being 2500 psi but had to mention a terminology correction
@bradleys6600 Жыл бұрын
Also I was wondering, you say you have 8 gpm doing 10 feet 1 tip would be 16 times but 2 tips would be 32 times. Does a surface cleaner receive full gpm to each tip? So your 8gpm unit is putting out 16gpm total out of your surface cleaner?
@danielcatches9376 Жыл бұрын
Hey buddy I bought a dragon diesel hot box 4000 psi 10 gpm and the switch is going bad on it after a few hours. Does your switch work good on yours if so I’m gonna the one that you got thanks
@MHS_PessureWashing Жыл бұрын
I have a big guy 28” paired with a 8gpm 3500psi I’m still deciding wether to go with 40040 tips or 25045 tips. I do a mix of pavers and concrete
@aussiepickers8250 Жыл бұрын
what's with the fart sound at 8.12?
@markc7954 Жыл бұрын
Could these be used to make a custom hose that will let karcher gun work with none karcher. I already have tryed adaptors and while these do work I need to go direct to karcher gun for the surface cleaner. Basically can this make the hose of the 22/15 fit onto where the 22/14 is on a pressure washer hose?
@enjoythesho1992 Жыл бұрын
Was you downstreaming that mix? Or using a 12 volt system
@omarmunoz8636 Жыл бұрын
Cool build. Do you have a link for the water fed pole hose?
@JAYJAYJAY53 Жыл бұрын
Thanks for the single/double wire explanation. I kept hearing/seeing in ads or how to vids but without an explanation.
@michaelknowsstocks5170 Жыл бұрын
looking to buy a 4400 psi 4 pgm and get a 20" surf cleaner. what tips do you suggest i use. i do not want to risk etching the concrete. was thinking 400025...thoughts? or a 250025?
@orlandomendiola4696 Жыл бұрын
I have a question hopefully you can answer it I have a 4400 PSI 4 GPM DeWalt I'm having trouble finding a surface cleaner that is rated for 4400 PSI can I buy a 16 inch surface cleaner and change the tips to make it more compatible
@clarencehurst7509 Жыл бұрын
It was a combination of everything but what really killed them when they left scrubbers covered up for them couple of days at night time scrubs was freezing cuz they was cover up
@Greg_Chase Жыл бұрын
You have tenants, and like a lot of owners of rentals, probably know the following: 1) "I have a dog/cat, it's house trained" 2) "I'm moving out, and sorry to say my dog/cat had 'accidents' now and then" 3) "if you try deducting from my deposit for odors, I will fight it" This is why so many rental owners say 'no pets' If the pet owners knew the high cost of eliminating the odor, even if they are normally responsible people, they will refuse to pay, even though they are at fault. The partial fault is allowing pets in the first place. Someone should start a company that sells 'pet mitigation bonds' purchased by renters that pay for the clean-up. If the tenant refuses to pay for the bond, they will have to find a different rental. The cost of this cleanup is not small.
@codyscetto2101 Жыл бұрын
Have you Ever Tried Using The muiratic Acid, Or Some Varsol Paint 🎨 thinner Stripper, Chemicals, Because That’s Like Oil Based Paint 🎨, An I Gotta Tell Ya Something If Ya Get That Paint 🎨 On Your Clothes, That paint will never ever Fuck’n come out.
Пікірлер
what kind of machine is that? cost?
Been a few years since I studied chemistry, but going back to basics you ALWAYS use a full face respirator as fumes can irreparably damage your eyes. Also it's a sensible precaution to install an extractor fan into your mixing area as part of a belt & braces approach to deal with fumes
My son just bought a house and needs this service. Lexington KY, any recommendations?
What size is your trailer ?? I just picked up a 12 x 6 for $1,500 Canadian,if you can believe that ?? A bit of a steal of a deal. I was stuck on what to do about the hose reels but you just solved it for me.
Hi, I have a room where there was, to my knowledge, minimum puppy pee. I hit with chemicals. Then Zinzer oil base three times. Smell is still faint, but it is a chemical odor. to rework this I don't know if I must grind all the zinzer oil base down. Any suggestions. ( To my knowledge puppies pee downward and not against the wall, but I hit the drywall too with this same procedure. Can you please recommend something?????? I am willing to buy stuff but want to avoid the five figure bill for something I could hire if needed and just work the essential parts that I should not get involved in as a layman. Thanks ..
There's got to be a simpler solution by now?
Great video. Thank you for sharing.
This is a great setup. Thank you for sharing. How about exhaust fumes in the trailer? Doesn't the pressure washer make a bit of heat and exhaust fumes?
Whatever happened to you, I started watching your videos well over half a decade ago. Hope you are alright
How do you get to the gutters 30+ feet up?
Hello, I am bidding on an apartment complex for post-construction cleaning services, however, I'm unable to clean the exterior second and third story windows. Would I just not bid on windows all together or just have a price for cleaning the inside of the windows?
i would love to built a hose rack like that..
Where did you get these fittings?
Fantastic points… My bid for that 1st house is $1200 Us dollars thats right.. nice clean cash… You know that great point you made about the low E Blue tint windows. Those area a real nightmare and seems like they came around and kind of disappeared ?? as I dont run into them anymore and for that I am so grateful!
What's that white spot on the left side of the siding?
2.5gpm 3700psi what would be the best tip for 20inch surface cleaner? I didn't know 20inch cleaner is supposedly to big for my machine...thankyou
how many gpm is the avrage hose bib
what psi pressure washer where you using thanks
I listen to what you were saying to your videos about pressure no I don't know anything about pressure and how that's supposed to work I guess for right now I just want this Downstream injector to work if you don't know what your precious are can that damage the machine I was thinking about maybe not born the injector out maybe what I'll do is I'll just take the injector screw cut the end off of it take the ball and spring out and just use it like that at what time it seems to be working pretty good now not so much what do you think
How come your hose wheels are on the back rather than the side I was thinking it would be a lot easier on the side you would have to run all your hoes out the back 100 feet and then come back so don’t you think it would be easier and more efficient to run them out the side
I would charge $225.00 for that cleaning in 2023. (Single truck wash pricing)
Great wash job!
Do you mind to share formula of what is in the bottle? I did hear water but also heard soap.
What chemical did you use?
What about waste water from surface cleaning?
BEST video I've watched on this subject...GREAT JOB
Nice video - 4:29 what about cleaning the hose of all cutting debris?
Long time no videos
Freakin awesome interesting video man!!Wow about a 1/2 gal a minute pretty badass!
What tools are being used?
What do you use in your foam cannon?
What the point in u making this video with u telling us the solution you using, you’re not helping nobody but yourself stop making these videos if you’re not telling nobody the solution you’re using specially for some of us that are new in this kind of business
Great explanation 👍🏾
If you are running 8gpm 3500 psi 4 tip bar what tips would you suggest I don't fell my 28" is cleaning as well as it should. Thanks for your videos
Sorry to be picky, but you last 2 numbers are absolutely not the gpm it is your orifice size. 40050 is 40 degree tip with a 5.0 orifice. 5lindustry standards say that 5.0 orifice is 1.45mm. Your math is right with 2 nozzles at 5.0 orifice with 8gpm being 2500 psi but had to mention a terminology correction
Also I was wondering, you say you have 8 gpm doing 10 feet 1 tip would be 16 times but 2 tips would be 32 times. Does a surface cleaner receive full gpm to each tip? So your 8gpm unit is putting out 16gpm total out of your surface cleaner?
Hey buddy I bought a dragon diesel hot box 4000 psi 10 gpm and the switch is going bad on it after a few hours. Does your switch work good on yours if so I’m gonna the one that you got thanks
I have a big guy 28” paired with a 8gpm 3500psi I’m still deciding wether to go with 40040 tips or 25045 tips. I do a mix of pavers and concrete
what's with the fart sound at 8.12?
Could these be used to make a custom hose that will let karcher gun work with none karcher. I already have tryed adaptors and while these do work I need to go direct to karcher gun for the surface cleaner. Basically can this make the hose of the 22/15 fit onto where the 22/14 is on a pressure washer hose?
Was you downstreaming that mix? Or using a 12 volt system
Cool build. Do you have a link for the water fed pole hose?
Thanks for the single/double wire explanation. I kept hearing/seeing in ads or how to vids but without an explanation.
looking to buy a 4400 psi 4 pgm and get a 20" surf cleaner. what tips do you suggest i use. i do not want to risk etching the concrete. was thinking 400025...thoughts? or a 250025?
I have a question hopefully you can answer it I have a 4400 PSI 4 GPM DeWalt I'm having trouble finding a surface cleaner that is rated for 4400 PSI can I buy a 16 inch surface cleaner and change the tips to make it more compatible
It was a combination of everything but what really killed them when they left scrubbers covered up for them couple of days at night time scrubs was freezing cuz they was cover up
You have tenants, and like a lot of owners of rentals, probably know the following: 1) "I have a dog/cat, it's house trained" 2) "I'm moving out, and sorry to say my dog/cat had 'accidents' now and then" 3) "if you try deducting from my deposit for odors, I will fight it" This is why so many rental owners say 'no pets' If the pet owners knew the high cost of eliminating the odor, even if they are normally responsible people, they will refuse to pay, even though they are at fault. The partial fault is allowing pets in the first place. Someone should start a company that sells 'pet mitigation bonds' purchased by renters that pay for the clean-up. If the tenant refuses to pay for the bond, they will have to find a different rental. The cost of this cleanup is not small.
Have you Ever Tried Using The muiratic Acid, Or Some Varsol Paint 🎨 thinner Stripper, Chemicals, Because That’s Like Oil Based Paint 🎨, An I Gotta Tell Ya Something If Ya Get That Paint 🎨 On Your Clothes, That paint will never ever Fuck’n come out.
Do you use that on polished aluminum?
Love your set up!!
Nice setup man.