Пікірлер

• 
  @landiahillfarm65902 күн бұрын

  Gloomy, overcast... New England? I am looking at Sambars but I cant get a straight answer if they're legal in my state [VT]. Don;t even know if I can fit in one either! LOL

• 
  @landiahillfarm65902 күн бұрын

  No heat gun? Set it out on a hot sunny day on some pavement, it'll soften right up. I wish I could find an old janky KEI truck like this to play with. They are getting stupid prices for them post COVID.

• 
  @MickyBellRoberts3 күн бұрын

  I ordered a Subaru Sambar 1998 from Japan which will arrive in August. I am so excited I can’t wait. I love what you have done with yours. I just subscribed to you. Thanks for posting this.

• 
  @T_Hawk8616 күн бұрын

  "I'll give it to you for a reasonable price...maybe" 😂😂

• 
  @mamorusuwa988022 күн бұрын

  good job!👍

• 
  @SomeKoolPlace28 күн бұрын

  What are the details on your impact? I can see it’s 24v. Brand or model number please. 🙏🏽

• 
  @GreeceMonkeyz17 күн бұрын

  It's a Kobalt 24v 1/2" drive. Works pretty good, went with that because I already had the batteries for their 24v miter saw.

• 
  @doug_chesterАй бұрын

  Can you share where you got the shift knob from?

• 
  @GreeceMonkeyzАй бұрын

  Amazon find, came with a few different adapters for the thread pitch and just screws right on.

• 
  @AAANDN1Ай бұрын

  Nice job dude. Teally line the plasti dip bumper and DIY bedliner. A definite woll do myself👍

• 
  @GreeceMonkeyzАй бұрын

  Thanks 👍

• 
  @cyrilledemissy2222Ай бұрын

  si vous en faite un pour moi combien vous le vendriez if you made one for me how much would you sell it for

• 
  @Ubaldino-si9vmАй бұрын

  Good job and good idea bro

• 
  @doug_chester2 ай бұрын

  Do you recall which wires were power and which were for the turn signal, by chance?

• 
  @GreeceMonkeyz2 ай бұрын

  I don't follow, where are these wires you're referring to? This video was adding speakers to the doors, there were 0 wires in there originally.

• 
  @doug_chester2 ай бұрын

  Yeah, I realize this isn’t necessarily related to the theme of your video. But, I was just wondering, with all the work you did, if you knew which wires under the dash were for the turn signals. Finding a wiring schematic for the Hijet has been impossible for me so far.

• 
  @jimpie2312 ай бұрын

  By the way I had a pro install mine and he did use the extension kit for my 8’ door. However, being an engineer I noticed on the 7’ door the whole track is not being used. How far would the 8’ door open without doing anything? Is it possible that it would open a 7’6” door fully without doing anything? When you increase the header, do you need to do anything to the track, etc.? Is there a reason you need to open the door fully? When I had my tract home built 20 years ago, this was a reasonable option (3 car garage, both doors were about $300 extra), so I opted for this. The only time this is used is when you have a larger/higher truck, or when you put on a car top carrier for storage for a vacation. You can open this carrier in the garage, fill it and close it and then can safely ride out in the morning. This works with the carrier we have. This was on a 2012 Honda Odyssey. PS: I actually bought the same door opener for a rental condo I own and noticed the extra track length. I ran into a different problem, the door opener was too long, I ran into a You Tube video showing how to decrease the length. I did a different workaround, I had an “I” beam in the way. The “I” beam was covered by a drywall box, which I cut into and recessed the opener into the box and that worked. The opener was 2” too long, but when done there was still 3” to the beam.

• 
  @GreeceMonkeyz2 ай бұрын

  That's the funny thing, the tracks are long enough for an 8' door but the factory stops on the opener bars are the limiting factor. So no, I didn't have to do anything to the tracks. And yea the only reason I tried to maximize the opening height is because I had a ladder rack on top of my truck at the time. As far as how high it would open without modification, you would have to install it to a point where you can test or measure where the lift arm rests closed up to the stopper at the full open position. Theoretically it would open the distance between the physical stops if you can install it in a way to take advantage of the full travel. Too many variables to say with certainty.

• 
  @jamesamber60092 ай бұрын

  I love Toyota's simplicity, and durability!

• 
  @FishBrooklyn2 ай бұрын

  Would love some of the 3D printed bumper clips. Do you have a business email I can contact you at?

• 
  @GreeceMonkeyz2 ай бұрын

  I have been meaning to repair my 3d printer so I can offer these clips to everyone asking. I'm working on it, keep an eye out, I will post a vid/short when I get to making them.

• 
  @mickhare98673 ай бұрын

  After all that, we didn’t even get to see it even sitting on the new wheels!!!!! 😖

• 
  @ChuckRothberg3 ай бұрын

  Nice! I don't know if I missed it but what did you do about the cat temp sensor?

• 
  @GreeceMonkeyz3 ай бұрын

  I zip tied the wire up out of the way and just pulled that bulb out of the dash, it doesn't affect anything else.

• 
  @randymorrical8493 ай бұрын

  Like what you have done! Interested in the 3D printed bumper pieces if yer making them and selling them. Like the content as well.

• 
  @GreeceMonkeyz3 ай бұрын

  Thanks! I haven't been printing them, but if theres a demand I guess I'll order some filament and print some up. I'll post an update when I do.

• 
  @randymorrical8493 ай бұрын

  Thanks man!@@GreeceMonkeyz

• 
  @rpbess3 ай бұрын

  Trying to figure out where to run the speaker cables through to the car. I see the grommets, but can’t find them inside the hijet. Any help with finding them once passed through?

• 
  @GreeceMonkeyz3 ай бұрын

  Which ones are we talking about exactly? In the front from underneath? or in the door jamb?

• 
  @ryanallman35363 ай бұрын

  Thanks only place I can find one is wiruswin but do t ship to USA

• 
  @ryanallman35363 ай бұрын

  Did the intake help power any at all ?

• 
  @GreeceMonkeyz3 ай бұрын

  Not noticably. Maybe throttle response as it is much less restrictive. Mostly just makes your ears happy when you can hear induction noises. Alost losing a few pounds of intake tubing didn't hurt.

• 
  @dcw15403 ай бұрын

  Does it back fire when you let off? Thank for sharing 😊

• 
  @GreeceMonkeyz3 ай бұрын

  It sure does. I recorded it at night and it shoots flames about 2 inches long lol

• 
  @cactuarizard4 ай бұрын

  Hell yeah! Can’t wait to try this

• 
  @complaintdesk46264 ай бұрын

  What white paint did you use? :)

• 
  @GreeceMonkeyz3 ай бұрын

  I used two different white automotive touch up cans in alternating coats to get a closer color match. I think they were arctic white and stone white. 30 years of sun fade is not easy to match.

• 
  @ericanderson85564 ай бұрын

  Nice. I’m going to do the same. $50 for an extension kit is ridiculous.

• 
  @Deuce69694 ай бұрын

  Currently building a hijet myself what lug pattern are the wheels you purchased. Im having a issue finding wheels

• 
  @GreeceMonkeyz4 ай бұрын

  Hijets have a funky bolt pattern of 4x110, here in the states you will mostly find ATV/UTV wheels with that pattern. My wheels are 4x108 and I'm using misalignment lug nuts which allow for 1mm play in either direction giving me 110mm. Definitely not ideal, but with the right hub centric ring I don't have any problems with vibration even on the highway. Might be easier to get adapters made and just use wheels with more positive offset.

• 
  @cameraman25054 ай бұрын

  Τι μαιμουδες ειναι αυτες;

• 
  @richbinaz5 ай бұрын

  Did you install the final bead dry? Lube the duck bill too. There are plastic drop center devices that hold the bead opposite the duck bill down and make install easier also. What is your plan on balancing the tires afterwards?

• 
  @GreeceMonkeyz5 ай бұрын

  I've seen those clamps, I need to get one. I used the Harbor Freight balancer to get them close, which for my application was enough, they're going on a kei truck that does 60 mph max. No vibrations at that speed so far.

• 
  @richbinaz5 ай бұрын

  The clamps do help. I use 2 for removal and 1 for installing Good luck with the HF balancer. A good test after initial balance is to lift the wheel , turn it 90° and put it back on the balancer. If it's still balanced, you are good to go. @@GreeceMonkeyz

• 
  @Bajicoy5 ай бұрын

  Simple and effective. Great idea

• 
  @ws56c625 ай бұрын

  That wine room is beautiful!!

• 
  @GreeceMonkeyz5 ай бұрын

  Thanks!

• 
  @gerryclark43305 ай бұрын

  Are those rims “handed”. ? The rotation of the spokes are different in the front

• 
  @GreeceMonkeyz5 ай бұрын

  No they're not, so left side looks different than the right.

• 
  @simongarcia27635 ай бұрын

  What geat ratio do you have and what motor?

• 
  @GreeceMonkeyz5 ай бұрын

  It's the 125cc motor that was in the dirtbike I chopped up. It's a 4 speed too, so I don't know what those gear ratios are but the sprockets were a 12 and 60 tooth I think. I since changed up the sprockets on the jack-shaft to get more top end since torque doesn't matter much with sleeves on the tires.

• 
  @simongarcia27635 ай бұрын

  @@GreeceMonkeyz cool, my drift trike has a 110cc 4 speed and I had a 13 tooth front and 38 back sprocket, top speed was about 30mph now I have 19 tooth front sprocket and 25 tooth back sprocket and the top speed it around 60mph and in the first gear it got sill plenty of torque. Whats the new gear ratio you're using and what's your top speed?

• 
  @simongarcia27635 ай бұрын

  @@GreeceMonkeyz if you check Colin furze drift trike he uses a 1 to 1 ratio that means the same front and rear sprocket.

• 
  @GreeceMonkeyz5 ай бұрын

  @simongarcia2763 I'm really not sure what the top speed is, probably too fast for comfort. It doesn't really stop all that well as I'm sure you know. I went with a 9 tooth on the drive side of the jack shaft and the 14 on the other end. Too lazy to math out the final ratio. Probably won't move without the sleeves on it 😅

• 
  @simongarcia27635 ай бұрын

  @@GreeceMonkeyz thanks, but what would me an estimate of the top speed?

• 
  @johnfluegeman9105 ай бұрын

  Thanks. That's a great idea.

• 
  @javybeaz32365 ай бұрын

  I made mine like 4 years ago and upgraded . much more sturdier. Easy to to use. Use it all the time

• 
  @randomuser232775 ай бұрын

  3:10 I don’t understand

• 
  @GreeceMonkeyz5 ай бұрын

  It's a manually operated fresh air vent conveniently located to cool your nether regions lol

• 
  @randomuser232775 ай бұрын

  @@GreeceMonkeyz OEM? Or aftermarket lmao sorry I had to ask because I couldn’t tell if you were being sarcastic

• 
  @GreeceMonkeyz5 ай бұрын

  @randomuser23277 heh. I don't know if its oem, I got it on the truck like that from Japan, didn't check if it had a subaru part number on it and I've since sold it.

• 
  @trikester49196 ай бұрын

  Here's a wheelie bar and flame thrower I put on my minibike kzread.info/dash/bejne/oZOr0qWAisvTc8o.html

• 
  @stephenbonin30496 ай бұрын

  Cheaper and stronger ones are available on eBay lol.

• 
  @GreeceMonkeyz6 ай бұрын

  Definitely scoop one up if its cheaper than buying the parts seperately, that's a hell of a deal.

• 
  @musiqdopamine47986 ай бұрын

  Where did you get that exhaust to buy

• 
  @GreeceMonkeyz6 ай бұрын

  Amazon, generic motorcycle slip on muffler, but I had to do some fabrication for the rest of the pipe.

• 
  @marcpigeon77966 ай бұрын

  Beautiful work 🏍️🇨🇦

• 
  @mikeromanwhisky50066 ай бұрын

  What did you do about those two pipes before the cat and what about the cat? I have the same Hijet exhaust has holes rusted through trying to figure out what to do.

• 
  @GreeceMonkeyz6 ай бұрын

  I no longer have any of the stock piping, those holes are air pre-heaters to help warm the engine up faster, they don't enter the exhaust stream, just go around it. Sorry for the late reply!

• 
  @shrekomus6 ай бұрын

  Thank you for making this.

• 
  @jamesstanley55036 ай бұрын

  Nice tire changer modification. Did the U bolts hold the duck head drop pipe tight and in position while peeling the tire off the rim? thanks for posting

• 
  @GreeceMonkeyz6 ай бұрын

  They really aren't seeing much force as the pry bar does all the work down low and the duck head its sliding along the rim which keeps it in place too. But yes they've been holding just fine!

• 
  @BoostedMx6 ай бұрын

  Size speakers

• 
  @GreeceMonkeyz6 ай бұрын

  6.5" Sundown Audio subwoofer and 6.5" Kenwood Component door speakers (needed some trimming to fit in the door)

• 
  @nicholasreif34436 ай бұрын

  Verrry spicy. What wheel size and tire size?

• 
  @GreeceMonkeyz6 ай бұрын

  They were 16x7 +35 wrapped in 195/45R16 tires. With 15mm spacers and I think removed mudflaps, they dont rub.

• 
  @Road_Rash7 ай бұрын

  Excellent duck head design... I've been wondering how I could avoid paying over $300 for the one commercially available, I forget who sells it, but it's way overpriced... this will fit the bill just fine! 🖖🏿😎👍🏿

• 
  @ernestalfa90455 ай бұрын

  😂😂😂 you are right me too trying to get over those 300 dollars

• 
  @derekfife96818 ай бұрын

  Love your projects and videos. Can I ask what bags you used ? I’m hoping to bag my Carry this winter. Thanks

• 
  @GreeceMonkeyz7 ай бұрын

  I threw together the system from donated parts, so the front bags are from the Air Lift Performance kit that I aquired from my cousin, meant for the rears in a VW GTI and the rears I ordered off amazon, generic maXpeedingrods 110mm stroke bags. It's not perfect, I plan to redo most of it now that I'm doing other things to the van. Videos on that soon.

• 
  @loganwells45509 ай бұрын

  Did you have to upgrade your battery or alternator for all the mods being done?

• 
  @GreeceMonkeyz8 ай бұрын

  I'm still running the stock alternator but I did install a larger battery to compensate for the electrical load but also because I needed an AGM battery to install sideways when I relocated it. Stock battery would probably have been ok since I also changed every bulb to LED so it balances out probably.

• 
  @Red-pf8pq9 ай бұрын

  THIS IS PERFECT. Was wanting to ask, never painted a car just vinyl work, do you not need to sand before painting or is there some exeptions with certain vehicles such as a Kei Truck? Guessing it has to do with the clear coat?

• 
  @GreeceMonkeyz9 ай бұрын

  I've painted a kei truck in and out, but I'm still no expert. Definitely do your research. You want a good mechanical bond, so sanding is ideal. Scuffing pad at bare minimum. These kei trucks seem to be painted with single stage paint, so no clear, just a thick ol layer of glossy white.

• 
  @Red-pf8pq9 ай бұрын

  @GreeceMonkeyz much appreciated I watched your series when you built the red kei Truck and was very impressed. 10/10 best walk through Kei Truck build. Was mind blown you fit a well sized sub in and without making it look janky.

• 
  @GreeceMonkeyz9 ай бұрын

  Thanks! 6.5" sub is probably too small to most people but it fills that tiny cab with lows nicely.

• 
  @jaidenjeffreys90529 ай бұрын

  I’m doing maintenance on my new s110p and my cv is shot, any idea what the American/Canadian alternative is?

• 
  @GreeceMonkeyz9 ай бұрын

  I'm not sure about the cv axle itself. I've seen them for sale by some kei parts suppliers and also on eBay. They aren't cheap though.

• 
  @user-ql2zn1lx8r9 ай бұрын

  Would like to buy some of the bumper clips...replacing mine and know I will need some if you are still selling.

• 
  @GreeceMonkeyz9 ай бұрын

  I've still got the files to print out some more, send me an email at [email protected]

• 
  @jamesjohnson86619 ай бұрын

  The Sambar has more leg room, rides better and runs smoother. Still, i don't trust that engine.