Пікірлер

• 
  @johnmadsen3713 күн бұрын

  Excellent driving. It’s so nice to see people using strategy and low speed to to trails.

• 
  @onlyme887013 күн бұрын

  I used it for oxygen sensor port but it was so badly crosse threaded was extremely challenging to get it right with the location of it. Drilled out a new hole and welded on a new receiver for the sensor.

• 
  @dad356223 күн бұрын

  Dang, for the price of tools and the B&M shifter, forks, etc, I’d rather just buy one remanufactured. Super sucks, I’d rather do it myself, but still.

• 
  @RubiKidd0620 күн бұрын

  It’s always rewarding doing a rebuild yourself but the amount of tools required might stop a lot of people. I’d still rebuild it but thats me speaking.

• 
  @dad356220 күн бұрын

  @@RubiKidd06 thank you so much for the feedback! How’s it holding up? How many miles on it so far? Your jeep is amazing!

• 
  @dad356223 күн бұрын

  The way you tighten that one bolt is you put the transmission in 2nd, then torque. Super funky but that’s what I read.

• 
  @dad356223 күн бұрын

  What advice did the company say regarding the rebuild ? Did they say it’s better to go with the AX15?

• 
  @MrCubflyer24 күн бұрын

  Thanks

• 
  @MrCubflyer24 күн бұрын

  I have an older optrel and its been a great hood its just not the clearview style one so im looking for a clear view one because I dont see like I use to.

• 
  @denniscampbell4414Ай бұрын

  Nice helmet

• 
  @RubiKidd06Ай бұрын

  Indeed

• 
  @72combatchuckАй бұрын

  Do you know if you can find the rear output seal for these at the local autoparts store? i cant find a part number

• 
  @haipai-haisАй бұрын

  Nice bikes!

• 
  @RubiKidd06Ай бұрын

  Thanks

• 
  @havenbrookeАй бұрын

  Very good purchase! Those bikes are awesome

• 
  @arnaldorivera179Ай бұрын

  Pittsborough 😂

• 
  @RubiKidd06Ай бұрын

  Yeah…

• 
  @arnaldorivera179Ай бұрын

  @@RubiKidd06 😂

• 
  @JoeMamazHouseАй бұрын

  Good video, got a 03 rubicon recently it’s as reliable as my 2nd Gen Tacoma. I’m sort of group 2/3 it’s got a little lift but looks stockish besides a winch on oem bumper and it had a rear bumper w/swingout. They’re just cool rigs to make your own.

• 
  @RubiKidd06Ай бұрын

  Awesome 😎

• 
  @marktucker3951Ай бұрын

  I think I'm a purist and I think the line between 2 and three is anything you can do after after 4 in lift your talking changing alot of stuff you can run stock pitman and not a lot of changes that's 2 number one is like you said 4 doors etc......by the way why 4 doors in a wrangler that's why you go Cherokee never understood why they went 4 door but if the not lifted with the big tires there ugly as sin .....!!!

• 
  @marktucker3951Ай бұрын

  Said that wrong 3 rd level is 4 inches and above 35 - inch tire and above will hack anything to get it right I will never say nothing isn't write not my business your jeep your business level 2 purest and 33 and below / level 1 starting out just like you said ...I also have stock flares regular grill 33 3 inch lift stock pitman I do run adjustable top rear control arms and front and back adjustable track bar and that pretty much all and the zj steering upgrade cause it's just bolt in I'm in the 2 level won't cut or weld much but I can't understand the rear shocks and the damn angle they are from factory that will be the only big change I make

• 
  @RubiKidd06Ай бұрын

  Agreed but to each there own I guess…

• 
  @haipai-haisАй бұрын

  Great video!

• 
  @RubiKidd06Ай бұрын

  Thanks 😎

• 
  @moabwheeling1305Ай бұрын

  Kinda a fun video Harley ! I like the helmet you bought with the camera mount . You should get some killer video with it on your next mini bike adventure. Take care my friend and catch you on your next video. Please say hi to your dad from me.

• 
  @RubiKidd06Ай бұрын

  Thanks 😊 and I will!

• 
  @haipai-haisАй бұрын

  Cool video

• 
  @haipai-haisАй бұрын

  Nice helmet!

• 
  @RubiKidd06Ай бұрын

  Nice indeeeed

• 
  @havenbrookeАй бұрын

  What a nice helmet! Looking forward to more mini bike content!!

• 
  @RubiKidd06Ай бұрын

  More to come

• 
  @dylanwatson8468Ай бұрын

  Sounds like a ups/fedex problem not genright lol

• 
  @RubiKidd06Ай бұрын

  lol

• 
  @DougFL66Ай бұрын

  So key on but not running engine right??

• 
  @RubiKidd06Ай бұрын

  Yes

• 
  @DougFL66Ай бұрын

  @@RubiKidd06 OK thanks cause it seems like I’m having problems like a lot of people are. I appreciate it.

• 
  @RubiKidd06Ай бұрын

  @@DougFL66 no problem 😎

• 
  @havenbrookeАй бұрын

  You should do more videos like this! Awesome vid💯

• 
  @RubiKidd06Ай бұрын

  I will be!

• 
  @johnfitzgerald5158Ай бұрын

  I just got 4 chickens, a coop and enclosure for free right after Christmas. 1 tan easter-egger, 1 white-easter egger and 2 barred hens. I'm getting more eggs than I know what to do with. Since we've gotten them, I noticed the wild turkeys hang out in our yard more than usual. I see more mice around, probably due to the feed. And yeah, birds are quite messy, but I knew what I was getting into. It's like having 4 little velociraptors for pets, particularly when you give them a bug or some fresh veggies.

• 
  @RubiKidd06Ай бұрын

  Velociraptors is accurate 😃…sounds like you’ve got quite the setup.I’m not familiar with those breeds I’ll look them up! Thanks for the comments John.

• 
  @chiathach206Ай бұрын

  It's ok, I still prefer the 3m 9100xxi....

• 
  @PlaneManHehehe2 ай бұрын

  That is disgusting she's a little kid

• 
  @RubiKidd062 ай бұрын

  You’re calling my Jeep TJ disgusting and little?

• 
  @russellwolter51532 ай бұрын

  I wish that my dad would have done all the work during our father/son projects. But no, I had to do the work and learn something other perfecting my watching skills.

• 
  @RubiKidd062 ай бұрын

  Thank you for your comment, the context of your comment really begs the question why you only did “projects” with your father. You see every single day I work right beside my dad working on jobsites driving stakes,mixing concrete,spreading drywall mud,framing houses up together. We even build our jeeps together off camera which is typically the portion you don’t get to see because im holding the camera so you could watch this video because your dad wouldn’t help you work on your Jeep. All this being said me and my dad have a great relationship “working” together most nights you can find us both with oil covered hands or mud up to our knee caps….oh by the way he sends me into very tight crawlspace areas where he can’t fit, I do all that voluntarily because I don’t mind getting my hands dirty. I bet your pants knees don’t even have holes in them.

• 
  @justincrane66002 ай бұрын

  It was nice meeting yall, thanks for showing my jeep in the video 👍🏻

• 
  @RubiKidd062 ай бұрын

  Nice meeting you

• 
  @havenbrooke2 ай бұрын

  Lolll

• 
  @campbellbuilt2 ай бұрын

  We should get some snow chains Harley.

• 
  @haipai-hais2 ай бұрын

  It's pretty cool looking at all the different Jeeps!

• 
  @havenbrooke2 ай бұрын

  It is!

• 
  @havenbrooke2 ай бұрын

  Loved the “Trapped in Paradise” reference😂 Great video, Harley!💯😎

• 
  @havenbrooke2 ай бұрын

  Awesome video. Keep up the good work. 👍

• 
  @hunterdarcy54422 ай бұрын

  Only thing is you gotta keep about 10 of the impact socket adapter. I always snap it right off lol

• 
  @RubiKidd062 ай бұрын

  LOL 😎

• 
  @haipai-hais2 ай бұрын

  Cool!

• 
  @ivgot12 ай бұрын

  Crack the bolts and use a battery drill gets those long boltscaa whole lot quicker. Good video though..

• 
  @denniscampbell44142 ай бұрын

  You need a big motor

• 
  @RubiKidd062 ай бұрын

  I totally agree

• 
  @takodawalters68502 ай бұрын

  What did I just watch?

• 
  @RubiKidd062 ай бұрын

  Peak awesomeness😎

• 
  @havenbrooke2 ай бұрын

  Awesome!

• 
  @marklinder90852 ай бұрын

  If you can't even properly spell the thing you are trying to discuss, you probably have no business discussing it.

• 
  @RubiKidd062 ай бұрын

  Thanks for helping my algorithm. 😎

• 
  @JH-ii3jc2 ай бұрын

  You really need an impact universal instead of the chrome one

• 
  @GingerandJamin2 ай бұрын

  I've broken a couple and learnt this lesson, even cheap impact rated ones that have a pin will break. Really recommend pinless

• 
  @RubiKidd062 ай бұрын

  I own both and use this one because it’s way thinner and these impacts don’t put out enough power to damage these.

• 
  @RubiKidd062 ай бұрын

  @@GingerandJamin Been running this one for a while,it’s a Cornwell and these little impacts barely put out enough ft lbs to touch those hefty swivels.

• 
  @RubiKidd062 ай бұрын

  @@GingerandJamin Your probably using an actual 3/8 impact is where your issue is.

• 
  @moabwheeling13052 ай бұрын

  Great video Harley ! Looked like a fun adventure on your raft .Take care my friend and catch you on your next video.

• 
  @RubiKidd062 ай бұрын

  Thank you for watching,looking forward to making my next video.

• 
  @campbellbuilt2 ай бұрын

  When you putting a outboard on it?

• 
  @havenbrooke2 ай бұрын

  Loved the video!😂

• 
  @Fishpalms2 ай бұрын

  Awesome raft! Good spent money guys.

• 
  @RubiKidd062 ай бұрын

  Thanks for the comment.

• 
  @Fishpalms2 ай бұрын

  Nice!!!

• 
  @havenbrooke2 ай бұрын

  Cool video Harley. Looking forward to more fishing content.🎣😎

• 
  @RubiKidd062 ай бұрын

  Awesome 🤘

• 
  @moabwheeling13052 ай бұрын

  Nice little tackle box Harley, should get the job done for sure. Last time I went fishing was about 10 years ago in Valdez Alaska . It was a great time and it was salmon season , however I caught the wrong salmon and just threw them back . There were a lot of bears to contend with so you had to watch your back at all times . We were armed but did not have to use them. Good video Harley , keep them coming.

• 
  @RubiKidd062 ай бұрын

  Fishing in Alaska sounds really fun been wanting to do that for a while,yeah gotta watch those bears.

• 
  @campbellbuilt2 ай бұрын

  Why didn’t you test it to see if it floated?

• 
  @RubiKidd062 ай бұрын

  Good question I’ll have to try testing that.

• 
  @RubiKidd062 ай бұрын

  @@richardalvarado4334 Thanks

• 
  @Fishpalms2 ай бұрын

  Very simple box and love the sticker. 🤘

• 
  @everettw2 ай бұрын

  Woo!

• 
  @RubiKidd062 ай бұрын

  Hoo!