Mrs. Diesel Creek: I can’t understand how my nail files keep disappearing. Matt: (cleaning points) I don’t know dear haven’t seen them. Here you go my points file should do the trick. 😅😅
@JacksonCarey-sy3bt23 сағат бұрын
How did it run
@Feniantimmy23 сағат бұрын
Does nit take leaded fuel?
@jphoffmann968723 сағат бұрын
That is awesome that it actually works!
@johnharcinske4959Күн бұрын
I really enjoy your videos. I just finished watching the tow-behind roller series and am impressed with your enginuity and persistance. Love the push start idea in this video. I'm honestly a bit surprised that it worked ... but it was a hoot watching. Thanks!
@dalemettee1147Күн бұрын
Matt now that the umbilical cord has been attached to the power grid, the next big surprise is the monthly utility bill gets delivered to you. Also, during the recording of this project, I noticed a view of what looks like the trolley crane on the side of the driveway. I guess the next thing to buy is the 12" "I" beams for the crane.
@DieselCreek22 сағат бұрын
I have the beams
@johnmay4803Күн бұрын
best vid ive seen in years! pal that thing could turn someone in 2 red mist quicker then trump grabs pussy! lol i must say its a amazing contraption
@wesshirlaw8716Күн бұрын
That is now one of the best bits of gear you have now I recon with all that servicing new seals and oil’s 👍
@synyunlee3888Күн бұрын
Please give the little tractor a good power wash n clean up.
@anthonyhill503Күн бұрын
so I guess the word Steam is used loosely
@DieselCreekКүн бұрын
There is some steam powered stuff there. Pennsylvania now makes it pretty hard to get steam stuff certified to be used. It’s my impression they used to be a lot more at this show, some people quit bringing it and some stuff does not get operated because you have to have it inspected every year which is a PIA process. The steam stuff does not hold my attention as well either so I probably don’t show it too much
@NormReitzelКүн бұрын
Thanks!
@DieselCreekКүн бұрын
Thanks so much!
@NormReitzelКүн бұрын
A lot of it is to pay for the (eternal) liability of having your wire become, essentiall) their responsibility. They have to buy insurance for every foot of primary line in the ground or up on a pole. Lawyers LOVE to sue power companies,who have deep pockets and they will settle instead of going to court. Sorry the ransom is so high. About ther best I managed was staggered payments - their insurance costs are staggered, after all. I wish you the best of luck - I always learn a lkot from watching your projects - for example, I dod not know there was mule tspe woth a woven in conductor to carry a tracer signal. I sure wish the guy who buried all the water pvc on this propertu had used thast!!! I used that on my buried propane lines,
@gregoryconnor9333Күн бұрын
I went straight to the end on this one, fantastic!
@zid1999Күн бұрын
Пиндосы😂
@benkaa4915Күн бұрын
That's my kinda life, my kinda gear. I'm doing some experiments on engines... watch this space.
@NormReitzelКүн бұрын
I had never considered using a surplussed out freuIght trailer as a kiln for drying wood. Here in South Texas I can probably just paint it flat black and that will get quite hot enough. Great idea!!
@CGT80Күн бұрын
20:15 I have that shirt! Tappy, tappy, tap. Thumb detector. It is scookum as frig............oh yeah, I have that shirt too. I'm only part way through, but maybe you need Jackstand Jimmy and the nitrous to get it going.
@Roberto-mx2ztКүн бұрын
Ronny Schäfer hat gesagt Kranplätze müssen verdichtet sein! :D
@AntonioClaudioMichaelКүн бұрын
She so close she just wants to run Heck yeah Nice and loud Sounds good Matt even on 1 cylinder 21:00 @Diesel Creek
@AntonioClaudioMichaelКүн бұрын
Worst tank i have ever seen Matt wow 16:28 @Diesel Creek
@AntonioClaudioMichaelКүн бұрын
Good old Minwax Fuel You got there Matt Love the smell of Minwax 15:00 @Diesel Creek
@AntonioClaudioMichaelКүн бұрын
Compression for days Matt 4:00 @Diesel Creek
@AntonioClaudioMichaelКүн бұрын
Lol He don't want to Let that Go at all to funny Matt 😂 0:50 @Diesel Creek
@gabrielv.4358Күн бұрын
That's why older cars will outrun ANYTHING
@CodyThomas83Күн бұрын
What’s the name of the music at 40 minutes?
@danellsworth7102Күн бұрын
That engine looks like something you would see on a Mad Max movie! great video!
@gabrielv.4358Күн бұрын
Intrigante
@WarrenKirk-zj6nzКүн бұрын
Always get it hot before you drain it is usual practice 👍
@ButchLoganКүн бұрын
Do not use brake cleaner on metal that you weld. When you weld the metal the fumes turn to forgone gas. That was used in ww1 to gas the trupes.
@jamessievers3899Күн бұрын
Your going to have to make a couple of wedges from the end of the fth wheel to the end of the truck frame @
@twoeightythreezКүн бұрын
Hello from North of Philadelphia in Pennsylvania, love your content. Though wish you woild at least drain the water out of motors before trying to get em running, at least put used drain oil in em.
@jldwolfeКүн бұрын
Nothing more frustrating than fighting with something for so long only to find out it was something so basic that you know you should have checked but just passed over.
@DieselCreekКүн бұрын
Yup lol
@iciciclesКүн бұрын
Thx 4 sharing the price, to good to pass up , for sure! My dad had a TD25 with pony starter, cool seeing one again. Run many D8's but never D9H, she's a beast!
@orztirr1417Күн бұрын
Are all farmalls from that era this loyal?
@how_to_hallagon1Күн бұрын
In answer to your question. You didn't want to fire up a 20,000lb excavator and drag it all the way into the shop
@hudsonvalleyrailandriverandairКүн бұрын
HERCULES 6 CYL ?
@darkwaterliquorКүн бұрын
Looks like the engine is running better after doing some work.
@PaganWizardКүн бұрын
I think that the addition of the patio umbrella instantly quadruples the price.
@Edward-turtleКүн бұрын
Man shave that tash.........................LOL
@michaelsonnier5724Күн бұрын
My thought was that you didn’t;t want to dirty up your brand new garage with this dude till he proves himself worthy!
@dalezumwalt2450Күн бұрын
My dad used to pour coke cola on the bead and let it sit there and loosen up the tire
@jwfinley7808Күн бұрын
It drifts to the right? Are the trax low?
@LamontStormКүн бұрын
Keep the 400
@markbutler5539Күн бұрын
If you wanted to, you could give the truck the original look which is all olive drab. You would have to research that shade of O.D. also white stars on the doors. I went into the Army right when they were transitioning from O.D. to woodland cammo uniforms and vehicles.
@dalemettee1147Күн бұрын
You said that you put a marker in the ground for installing water lines for heating the garage. What you should also do is to put a marker in the ground for future power lines under ground later on.
@marionwagaman8353Күн бұрын
I’d love to see more videos about both of the autocars but the orange one is going to be needed isn’t it?
@mdemers767Күн бұрын
In your effort to spin the starter extra fast, I'm surprised you didn't try hitting it with 24 volts instead of 12V. I'm sure you have something in your yard that has a dual battery setup. That being said, I was surprised at how effective pushing it with the bulldozer was. It didn't pop to life, but you could hear it firing on at least a few cylinders.
@Watchyn_YarwoodКүн бұрын
One whole year to figure out the ignition was off???
@davidcole258Күн бұрын
Hi Matt, as a PEng (electrical) I would suggest you have a 480v 3PH power supply as you are running motors and have an industrial facility. Your right to want mains power for the needs you can foresee into the future. That will also power your much needed overhead crane better than single phase.
Пікірлер
Mrs. Diesel Creek: I can’t understand how my nail files keep disappearing. Matt: (cleaning points) I don’t know dear haven’t seen them. Here you go my points file should do the trick. 😅😅
How did it run
Does nit take leaded fuel?
That is awesome that it actually works!
I really enjoy your videos. I just finished watching the tow-behind roller series and am impressed with your enginuity and persistance. Love the push start idea in this video. I'm honestly a bit surprised that it worked ... but it was a hoot watching. Thanks!
Matt now that the umbilical cord has been attached to the power grid, the next big surprise is the monthly utility bill gets delivered to you. Also, during the recording of this project, I noticed a view of what looks like the trolley crane on the side of the driveway. I guess the next thing to buy is the 12" "I" beams for the crane.
I have the beams
best vid ive seen in years! pal that thing could turn someone in 2 red mist quicker then trump grabs pussy! lol i must say its a amazing contraption
That is now one of the best bits of gear you have now I recon with all that servicing new seals and oil’s 👍
Please give the little tractor a good power wash n clean up.
so I guess the word Steam is used loosely
There is some steam powered stuff there. Pennsylvania now makes it pretty hard to get steam stuff certified to be used. It’s my impression they used to be a lot more at this show, some people quit bringing it and some stuff does not get operated because you have to have it inspected every year which is a PIA process. The steam stuff does not hold my attention as well either so I probably don’t show it too much
Thanks!
Thanks so much!
A lot of it is to pay for the (eternal) liability of having your wire become, essentiall) their responsibility. They have to buy insurance for every foot of primary line in the ground or up on a pole. Lawyers LOVE to sue power companies,who have deep pockets and they will settle instead of going to court. Sorry the ransom is so high. About ther best I managed was staggered payments - their insurance costs are staggered, after all. I wish you the best of luck - I always learn a lkot from watching your projects - for example, I dod not know there was mule tspe woth a woven in conductor to carry a tracer signal. I sure wish the guy who buried all the water pvc on this propertu had used thast!!! I used that on my buried propane lines,
I went straight to the end on this one, fantastic!
Пиндосы😂
That's my kinda life, my kinda gear. I'm doing some experiments on engines... watch this space.
I had never considered using a surplussed out freuIght trailer as a kiln for drying wood. Here in South Texas I can probably just paint it flat black and that will get quite hot enough. Great idea!!
20:15 I have that shirt! Tappy, tappy, tap. Thumb detector. It is scookum as frig............oh yeah, I have that shirt too. I'm only part way through, but maybe you need Jackstand Jimmy and the nitrous to get it going.
Ronny Schäfer hat gesagt Kranplätze müssen verdichtet sein! :D
She so close she just wants to run Heck yeah Nice and loud Sounds good Matt even on 1 cylinder 21:00 @Diesel Creek
Worst tank i have ever seen Matt wow 16:28 @Diesel Creek
Good old Minwax Fuel You got there Matt Love the smell of Minwax 15:00 @Diesel Creek
Compression for days Matt 4:00 @Diesel Creek
Lol He don't want to Let that Go at all to funny Matt 😂 0:50 @Diesel Creek
That's why older cars will outrun ANYTHING
What’s the name of the music at 40 minutes?
That engine looks like something you would see on a Mad Max movie! great video!
Intrigante
Always get it hot before you drain it is usual practice 👍
Do not use brake cleaner on metal that you weld. When you weld the metal the fumes turn to forgone gas. That was used in ww1 to gas the trupes.
Your going to have to make a couple of wedges from the end of the fth wheel to the end of the truck frame @
Hello from North of Philadelphia in Pennsylvania, love your content. Though wish you woild at least drain the water out of motors before trying to get em running, at least put used drain oil in em.
Nothing more frustrating than fighting with something for so long only to find out it was something so basic that you know you should have checked but just passed over.
Yup lol
Thx 4 sharing the price, to good to pass up , for sure! My dad had a TD25 with pony starter, cool seeing one again. Run many D8's but never D9H, she's a beast!
Are all farmalls from that era this loyal?
In answer to your question. You didn't want to fire up a 20,000lb excavator and drag it all the way into the shop
HERCULES 6 CYL ?
Looks like the engine is running better after doing some work.
I think that the addition of the patio umbrella instantly quadruples the price.
Man shave that tash.........................LOL
My thought was that you didn’t;t want to dirty up your brand new garage with this dude till he proves himself worthy!
My dad used to pour coke cola on the bead and let it sit there and loosen up the tire
It drifts to the right? Are the trax low?
Keep the 400
If you wanted to, you could give the truck the original look which is all olive drab. You would have to research that shade of O.D. also white stars on the doors. I went into the Army right when they were transitioning from O.D. to woodland cammo uniforms and vehicles.
You said that you put a marker in the ground for installing water lines for heating the garage. What you should also do is to put a marker in the ground for future power lines under ground later on.
I’d love to see more videos about both of the autocars but the orange one is going to be needed isn’t it?
In your effort to spin the starter extra fast, I'm surprised you didn't try hitting it with 24 volts instead of 12V. I'm sure you have something in your yard that has a dual battery setup. That being said, I was surprised at how effective pushing it with the bulldozer was. It didn't pop to life, but you could hear it firing on at least a few cylinders.
One whole year to figure out the ignition was off???
Hi Matt, as a PEng (electrical) I would suggest you have a 480v 3PH power supply as you are running motors and have an industrial facility. Your right to want mains power for the needs you can foresee into the future. That will also power your much needed overhead crane better than single phase.
Can’t never did anything. Try has done it all.