Welcome to the Let Dirt Fly KZread channel. We love anything that involves dirt, whether it be mudding with ATVs or racing Northeast Dirt Modifieds, we always Let Dirt Fly!
Social Media
Facebook- facebook.com/LetDirtFly
Instagram- instagram.com/letdirtfly
Tiktok- www.tiktok.com/@letdirtfly
Business Inquiries- [email protected]
Пікірлер
They are pretty nice! But i paid alot for my 24 canam outlander xxc 1000r it was very expensive,but its very heavy built. 895lbs dry weight. Grease fittings on everything. My neighbor bought a cf moto 950 sxs unfortunately he's very disappointed with having many issues. Its very nice looking. But he bought it used? Do maybe thats why?
Very informative. I have a 96 RST3 mountain bike with a Noleen mono shock. There is no PDF for this thing but your walkthrough seems to be what I need to do. I do have a question though. If after you release the nitrogen charge, then remove the internals can you use the measurement of the IFP before to blow it out to get your reassembly depth? edit : 'before you blow it out'
Thanks for this great video
what the fk is a "ratiator". I know y'all are canadian. Have to be. :)
oh look at marshell with the expensive oklies on. my fav brand but expensive. great video yet again boy's.
seth's 850 is like where are all the hard hole's at lol
Eyyyy got me going deeeeeep at the end 😂😂 love riding with yall can’t wait for next time
Met jmuddy at mud bash this year super nice guy talked to him in the vendor lot for I know a hour showed me his homemade floor boards and couple other things on his bike nice guy for sure
That was fun guys! You definitely went to a few places I did not go to! It’s an honor to be in the thumbnail! Thank you! Can’t wait to see you again!
Lol. "Still in two" but at the same time not slowing one bit. Nice video quality. Bright crisp
Good meeting you guys finally hope to get you guys in some real mud soon -Cj Bartlett
Just discovered this channel and I'm loving it! Thank you for the full sends lol
got to get use to u being on that massive 1000 lol. u can take bigger holes now. and when u guy's are done will be even sicker
been waiting all morning for this vid lol
definatly a good video, keep up yhe good work
Aye I was there I seen you guys I was on my 2019 canam renegade 1000 xmr
Did he have to have any type of lift to put 28” tires on it
Hola a qué medida se deja el pistón ifp?
So because the tires move in more If I put 29.5 sassys with this lift kit on my 2014 650 would they rub the back?
No, but you might want to run a spacer depending on the wheel offset.
@@LetDirtFly ty you sir
So it was the starter??
Awesome video. I have same bike but it’s 2021 model. Should be the same rebuild lower kit i imagine. Can you please post a link to where you got yours and also links for the tools? Greatly appreciated
You don't want that rebuild kit. We ran into issues with it. oem is the best.
My 2022 xmr 850 came with the fender mud guards. I had a 2015 model that didn’t come with any. It definitely makes a difference . I use to run a regenade and I was always covered in mud or snow lol.
I have a question about my can-am outlander xmr 850 an Someone was going fast with low gear an it heat up, but was overheating you think something happened to the piston one of them?Ever since then it's starting to overheating when go about 90 or 100 for awhile then it's overheating
check the cooling system. might have a bubble in it. i would also check the thermostat
the beadlock color don't match the plastics..... that would eat me alive everytime i walked up to the bike.
She’s getting fixed next week. They ordered the correct color, but the supply companies color was off. He went through a different supplier now and it’s going to be spot on. 🤘🏼
should have used your deburring tool to do that not the razer blade but all work's lol
I couldn’t get my pin back in, everything was aligned. I’ll buy a new one. Always something.
Looks like a decent tire. I have the same rims on my xmr. Nice test and review. 👍.
Hi. Can you guys please make video, with a left throttle on atv with electrical gas throttle, like polaris sportsman 570 2022- please 🤞 can't drive with my right hand 🥹🤞
Might be doing it soon
5:50 you can tell it’s about the driver and not the atv
If you had a grizzly 700 xtr, how would these compare between 30 aztex, motoslayers, or sludgehammers? I’m finding more and more videos on good tires and I just can’t decide. I do a bit of everything riding. Road riding to the trail that goes to the mud holes and most of the holes are soft bottomless marsh mud
Haven't had a chance to ride the motoslayers or sledgehammer tires yet. The teraches are lighter and thinner, and we all know they pull hard. Heard hid things about the motoslayers, but nothing spectacular. Again the sledgehammers are a beefed up mudzilla by appearance.
What exaust is that if you don’t mind me asking ?
That is just new silverbacks basically
Similar sidewall but very different tread. We’ve always wanted to test a set of them
@@LetDirtFly same tread pattern as well
I do agree they’re similar because they’re both a “V” pattern, but the tread itself is completely different.
What risers are you running I like the low profile of them my wife’s 570 is in need of a set of risers
This quad actually just has aftermarket bars and some 1/2” spacers with longer bolts under the mounts for the bars. On Marshall’s 850, he runs Rox 2” risers with pro taper bars
@@LetDirtFly good info thank you, also what snorkles is marshal running on his 650?
Next test.. skimming😬
Of course 🤘🏼
this weekend we will test them.
can you review the intimidator tires 🙏🏽
Might be an interesting contender for my next choice, I have a xmr 700 I’m going to run 32s on. I know Seth is a big aztex fan, how would he rate these to them? 700 is a good crawler if you’ve never been on one. Tried a friends 32 assassinators this past weekend for a day and it pulls them well, I can tell a few time in high they were there but low it turns them great. Was thinking about aztex, sassy, or maybe these. Any thoughts or opinions?
They are similar in many aspects. They are wider and heavier, but work well. They do seem to push more in the turns. The Aztex are the lightest, sassy's pull the hardest in the mud. haven't put enough time on these tires yet. We will be putting some time on them at stuck in the muck this weekend so stay tuned for that.
@@sethharman3006 definitely will do! I’m trying to make a choice within the next few weeks for sure. Still might lean on aztex. 700 has great low end torque and turns tires really well but I will admit it’s not really a “wheel speed” machine if that makes any sense at all. I’m in eastern nc so most of my riding is Busco (main) and surrounding places like deep creek etc. going to river neck in SC this weekend gonna see how that spot is.
I got 32 in aztex on my 700 xmr and they are amazing in thick mud and crawling out. I have a few videos on my page if your curious
i imagine they bog it down lol. u got 30' superatv's on the poor old girl lol. i so wish i could come play too lol.
do u guys have risers? i hear that helps with chatter and the stearing stem upgrade u can do.
im at 8;45. if u had less air it would have been no issue. i am not pestering just advice.
10psi seems like a lot but they are 30's i guess. i use 4-7 psi. with the 28' executioners i had they were run flats so i always had 4psi in them. keep in mind though it was all trail and woods not much road.
These are 6 ply so you need to add more to keep the side wall up. I usually run 2-5 in 8ply and 5-10 in 6 ply
the test i went on concluded i need bigger jets. so change them out and then back out and first video maybe if i can get it to stop backfireing. it ruins the shots.
i was going to go mud testing today but its 40c humidex out. too hot for my air cooled bike. these tires seem to work well.
Ok what kind of tape measure is that for that to be 5 inches bc that is at least 12 maybe even 14
What? We were talking about lug separation not wheel size. Wheel size is 14”
He was using a standard measuring tape, it's off a little from the bedside measuring tape 😂👍
@@LetDirtFly ok I was confused how it was that small
@@chrisgoetz3889 ok I knew it look a little bit big
Coming to stuck in the muck july 11th-14th?
Yes sir Saturday
Which way does the air flow on the fan goes? Towards the radiator or away from?
Pulls through
Great video! Thanks for sharing the mistake - I would have probably done the same thing. I have my fair share of doing things twice, so this will help me avoid that! ;-)
Fook your CFMOTO
This thing is going to rip!
Cant wait to here that baby roar