Yes! 41lbs! The same weight as xm310. That's the information I've been looking for. Thanks a bunch guys!

I been riding on them for maybe 3 months now. Woth cvtech , secondary spring, and pc5. They pull good. I agree they do something weird with the steering also.

Like em more than outlaw 3s? Thats whatd id be upgrading from only thing im worried about is they seem so heavy

"that's what Assassinators are built for"

Ok so just a thought. What would be better for smaller four wheelers like the 650. Doing like a 2-3’ lift on 28-30s or going with 30-32s on a stock lift? U can turn the smaller tires better but don’t have the ground clearance but you gain some clearance back with a lift. But with the bigger tires you can’t turn them as good but have more clearance

@LetDirtFly

3 ай бұрын

Tires with clutch work. We have a mudding 101 video that talks about this stuff.

What is your clutch setup with the yellow machine? Also is the ecu flashed? Or do you have exhaust and fuel tune?

@LetDirtFly

3 ай бұрын

It’s got a cvtech with shiftout setup for 8300 in low. It has a tune from Mr.RPM as well with rev limiter raised to allow for the higher shiftout and fuel corrections for the exhaust

@jamesonvids1433

3 ай бұрын

@@LetDirtFly spring and weights in cvtech?

@LetDirtFly

3 ай бұрын

1017 spring. Weights are to be determined by your tire weight. Every machine will be slightly different.

@jamesonvids1433

3 ай бұрын

@@LetDirtFly I have a 1017 spring on the way with some 12g weights. I’m running 30” terminators. Squared up. Also getting an ecu flash.

I made it in the video 😂 wooooo hoooo

@dgreco1374

3 ай бұрын

Should make a video of the terminators they did really well considering they were only 28s

@charles1127x

3 ай бұрын

@@dgreco1374i'm running a set of 32" terms on my 850 XMR. They chew

What's up with the renegade? Any updates?

@LetDirtFly

3 ай бұрын

Hope the next video will be out Friday.

What is all done to the 650 other than a clutch and exhaust?

@LetDirtFly

3 ай бұрын

Tune and tires.

@LetDirtFly

3 ай бұрын

Just a tune and our own clutch tuning. And some good tires lol

@benjaminwest6277

3 ай бұрын

@@LetDirtFly what’s done to the clutch tuning?

@LetDirtFly

3 ай бұрын

Just a 1017 spring, white epi secondary spring and got the weight set just right for the tires

Do you guys have stickers

@sethharman3006

3 ай бұрын

Have to make another batch up.

3 beadlock bolts missing at 1:02

@LetDirtFly

3 ай бұрын

Yes sir, that’s how the wheels and tires came when they came on the Worst Renegade on Facebook Marketplace. Check out the series.

@Williamxmr

3 ай бұрын

@LetDirtFly I watched a couple, they're really good! I kinda want a project, but I kinda don't lol

and gasket's are still mia with the shipping company.

@LetDirtFly

3 ай бұрын

Send us a message on facebook or instagram. Maybe we can help.

alot of water lol. and well boy's i might be headless its like 350 then shipping for one if the guy i sent it to cant get them out and something put on it for stud's. got to love older bike's. least it gives u something to get out on when they work hahahah

oh and thats a used head. i found 1 place in the states i can get a new one for 1300 lol

The middle of that swamp will swallow you

@dgreco1374

3 ай бұрын

Oh it did 😂 Seth buried marshals 850 😂 had to help winch him out

@LetDirtFly

3 ай бұрын

Yah we found a good spot you’ll see in our other video from Stuck In The Muck 😂