Hi friend. Thanks for visiting my channel. The most important thing you need to know about my channel is that I like keeping it real and down to earth.
I am just an average Joe trying to make it in the world like the rest of you. My videos cover a broad variety of subjects like nature and the outdoors, cooking, homesteading, etc. Basically, anything I think you guys might enjoy or find useful. My goal is to share my knowledge and experience with you by creating helpful videos that are informative and educational. I am just one guy with a camera making videos, not a Hollywood studio. My videos may not be the most polished but I do hope you enjoy them and find them helpful.
I love answering questions. So feel free to ask. Also, you can connect with me on Social Media
Disclosure:
As an Amazon Associate I earn from qualifying purchases.
Пікірлер
Your the man 👍
Thanks. Glad the video helped you out.
No Joy on a 2009 Rav 4. After pulling the master out, the security led is still flashing and doesn't go solid.
Sorry. Maybe someone else has a video about how to do it.
This fit to all toyota i have rav 4 2002
It is impossible to say for certain, but there is no harm in giving it a try.
ANY fish is edible as long as you know the cleanliness of the water it comes from, what it is, and if it's venomous. What IS important is knowledge, dispelling myth and knowing how clear/clean the water is where you want to catch fish. When someone says creek chubs, carp, shiners or minnows, do you get disgusted? WHY? THINK about it! Every other freshwater fish we eat comes from the SAME water! Common carp are suckers and eat from the bottom and eat detritus. They, like other suckers eat from the bottom of the lake, creek or river, have a vacuum mouth and ARE eating dirt as is their purpose like vultures are to eating roadkill. They CAN be eaten when you fillet them properly. While chubs and minnows are included in the carp family (Cyprinidae), they are predators and omnivorous. They are NOT bottom feeders. Appreciate, understand and eat the bounty that God has provided. Names and titles aren't important, but harvesting wisely IS. Invasive species are just that, invasive, but in times of crisis, a bountiful food source. Think what you will, but 1929 is coming again and almost here. What we consider as a nuisance animal NOW will be our sustenance. Blessings.
Very true.
Nice and simple
Glad you enjoyed it. Thanks for commenting.
The ethanol mandate was signed into law by George W. Bush, not Obama.
Comment ten thousand and one about this.
Great chrono, I'm just no good with them. My Caldwell only works about half the time.
It has been a good little chrono for me, but I don't think they are made anymore.
Ethanol doesn't draw in water ethanol has water in it ethanol gasoline also starts to stale within 2 weeks
👍
Thanks for the advice, what cable number do I need?
For a 30 amp service, you would use 10 gauge wire.
Thanks for this video, was able to follow it to replace my bearings and it is so quiet again!
My pleasure. I am so happy to hear that it helped you out.
Benar kah jarak camera ke gunung itu sekitar 16 kilometer?
Yes. This is true.
Good instructional video - thanks. A couple of tips: remove the stator - just mark it first so you know how to align it when you replace it. If you cut or even tear the insulation on one of those wires, it will fail and the price of a new stator is crazy. Also, never use a hammer directly on a bearing - you can easily damage the bearing if you slip and hit the seal or the inner race. Use a block of wood against the bearing and tap the wood with a hammer. The wood is much more compliant and still does a great job of seating the bearing.
👍
Perfect! Thanks for the video, saves me $100. I knew there had to be a method for corner bracing and gate bracing without spending $25 per corner on those wedge locks. Plus your method saves me two t posts per corner vs that other method as well. I'm using what was left here at this abandoned house when we showed up and took over. 20 t posts and a pile of heavy gauge 16' wire fence panels. Have to do a temp fence around the pad where the hydroponics house goes. This will help me keep the cows out, were on an open range and it will be some time before I can completely fence off the entire two acres.👍🏼
I get these guys in the yard (here in NM) all the time but I had no idea until today that they could do this lol. they're usually really docile, I pick them up and move them sometimes even. but today my dog found one and got it real worked up and he was hissing and shaking the tail and putting on a whole performance lol
Nice! They are cool snakes.
Thanks for the video! I'm about to do this maintenance. If you want to run the generator for 30 minutes you might want to put the cover back on to direct the fan air to where it will do the most cooling.
I am glad the video was useful.
Where does the y bone go ??
It does not go anywhere. It just gets chopped up into little tiny pieces.
Saved me from a lot of confusion! Thanks!
You welcome. Glad to be of service.
Thanks for sharing with your help I can now try to clean out the gunk in my carburetor and finally get it running.
Glad to help
Can you reverse the video and post that? I got ours apart, now to get it back together again.
I hope you were able to get it reassembled. The good thing about KZread is you can go to any section of the video by clicking on the progress bar at the bottom, and you can scroll backward and forward to find the part you want to see.
But how do you use it to start the vehicle? I thought it was just an alarm and not a remote start. But I open up the dash and there's a key and a transponder in there I've tried just about every combination of four buttons I can think of and I can't get it to work
I do not believe this remote has that function. If your vehicle is equipped with a remote start function, you will need a different model of remote to utilize that function.
Good video! I just got the infamous death scream from my Samsung. It's throwing the "ub" code - I've tried replacing the shocks on the bottom with no luck, so the bearings are next. What type of hoist did you use to life the drum out of the unit? Thanks again for the well-produced and thorough video! 👍
Thank you. I am glad it helped. Regarding your question about the hoist, I had an assistant lift the tub with a leverage bar.
Hi. This does not work for my toyota corolla 2013, try 3 times and nothing happend.
I am sorry to hear that. I hope you found instructions that did work for you.
Thanks 🎉
You're welcome.
You’ve got numerous issues!! You have ruined your own instructional video. But you don’t care, you just want more views. SMH
🤣🤣 This video was made before I even had a KZread channel. 🤣🤣
Thanks man for the info. I pulled out my outlet and was like WTF is this? But you set me straight. Great work on ur part.
My pleasure. Glad it helped.
Thank you! Very helpful!
You're welcome!
Thanks for the tips !!! I see a bunch of children in the comments that are wise guy keyboard warrior s
Looks like a belgium malinois
I thought that as well, but a Wisdom Panel DNA test revealed that she is mostly German Shepard with a bunch of other breeds mixed in. www.wisdompanel.com/app/s/wsh64f7 But she is is 100% beautiful and lovable🥰😍
Any idea on how to do the ch2? I had two fobs break and need to program a third
Sorry, I am not familiar with that process.
Adjusted mine last week but i didnt go to all this trouble. Just find TDC & pop the valve cover off & knock the jam nuts loose on both valves. with your fingers run both adjusting nuts down till they bottom out. then back the bottom nuts up 1/4 turn , hold and tighten jam nuts. this will give you 3 to 4 thousands clearance on both valves. Mower will now crank easy and run great.. This will work on almost all riding mowers with a few exceptions. You will know if you have the exception cause it will backfire very loud every time you cut the mower off. if yours is the exception just give the exhaust valve another 1/4 turn out. Great video brother , always good to know the correct way of doing things .
Good job.
Great Informative and FAST (Very Important) video. Question: How do you determine if the Carborator is the problem... Or something inside Mechanical?
99% of the time, it it is cranking but not starting, or running bad, it is the carburetor on these machines. Other problems are going to be pretty obvious, such a bad piston or a broken rip cord.
Hi, I'm in the process of trying to replace a switch like this, but it controls two lights instead of one. I have a three way toggle switch, I've tried all three of the black wires on the black screw of the switch but my lights aren't coming on. Any suggestions?
If you have a 3-way switch system (two switches in different locations to control the same light), only one switch has power. The other switch does not have an incoming power source. It gets its power from the other switch. The switches themselves do not have an on or off position. They act as gate keepers, redirecting the flow of power. It is a bit of a mind bender to try to understand. You have to find the switch that has the incoming power. That is the switch that must be wired correctly.
Simple and to the point! That is the best video. And it worked perfect. Thank You!
You are welcome. Glad it was helpful.
Please refrain from calling firearms "weapons" they are a tool!!
Huh? 😕 🤔
Thanks, very helpful!!!!!!!
You're welcome.
Thanks, man, for the video, it helped alot
You are welcome. Glad it helped.
Once you have plugged in the new switch, is it safe to hook up the battery and test to see if the cruise control light comes on?
Never mind. Done! Thanks!!
You're welcome. Glad it all worked out.
My tab broke, had to cut into that plastic ridge and dig into the far side using a flat bladed screwdriver ground sharp before mine would pop out, careful as the o-ring is just below the bottom of the tab. There are sealants and glues suitable for use around gasoline if the o-ring seat is damaged. Good to use copper wire, steel can corrode unless tank kept full as there is air (oxygen) and often a bit of water vapor too. Curious that bulb pumps air, but a finger over the end of that black tube demonstrates this is the case, and that black tube goes to a vent at the top of the tank, not the fuel filter.. But why does bulb fill with gasoline when I pump it and not air? The third black tube vents to the air cleaner, perhaps very restricted or a one way valve so pressure in tank can build up? Weird stuff going on here, would be easy to have a hard to diagnose fuel problem, curious my beat up FS110 has worked so well for 15 years. Finally, great video, would be a tough repair to figure out otherwise.
For many years, top quality generators exclusively used Kohler motors, Moderately priced used Tecumseh and cheaper models used Briggs & Stratton. THANKS for choosing the VERY common B&S motor for your proof of concept. I chose a Craftsman who chose Kohler and Tecumseh engines for significantly quieter operation and longer life due to having an oil pump that feeds journals instead of the cheaper B&S design which uses a metal "tongue depressor" strip that splashes random parts inside the crankcase to oil it. We do not have the E85 "gasohol" in my area which was exclusively designed to work only in auto and truck engines that have been modified to use that lower octane fuel. I find it interesting that you credit former President Obama for bringing E85 to us! Corn is one of the richest resources we have here in the USA but we waste millions of tons of corn our farmers grow each year because the supply far exceeds the demand both here and for export. I have never seen any small engines designed to use that lower octane fuel, so it does not apply to this discussion. Thanks to your valuable background information, I am eager to take the next step and retrofit my generator to use propane, a commonly available, more refined product than gasoline.. Kits are widely available on line and at retailers like Harbor Freight that bolt right onto the less refined B&S like what you use for your demonstration. Will your "hack" work equally well regardless of carburetor used by different generator manufacturers? Thanks for your help!
Your old one is still worth using
👍
I cleaned mine out an bought it some new insides it needed old ones still good as new
Good job
Thank you for the video sir, great watch
My pleasure. Glad it was helpful.
I'm worried that's not enough air flow to vent the crank case unless you have removed the needle and seat from carb
Not a problem.
That's a coyote with mange
Most likely.
Picked one up. Can’t seem to find a replacement bolt assembly. Any one know where I can possibly purchase one?
Maybe on a gun auction site. That where I would look.
One question and in general, one such a rest and setup is not useful for zeroing of a break barrel air-gun, due to need to move up the gun every time when a new pellet is to be placed in the barrel for the subsequent shooting. Or am I wrong in saying this and even after repeated moving the gun, one can expect to have a steady position?
No. This is not good for a break barrel air rifle. Actually the best thing is a good firm couch cushion. Try it out.
7:42 Your setup and shooting table moves so much with motion and worst with shooting. Doesn't this defeat the purpose of lead sled and then, with ever shot, you barrel moves so much up and even the entire rest is jumping up and down. Doesn't this impact on what you need? But then you say you have successfully zeroed 3 guns, one after the other so I assume the final job is done despite apparent loose set up. I'll be thankful if you respond to this.
This is a gun rest. It is not a shooting vice.
Great. But 0:32 PLEASE don't take something that sharp on a hand that is so loose to move around! (Your future generations may never find why!!!)!🤔😱
My grandchildren found your comment funny.
More like a Breakdown 😂
That is for sure.
Bottom is the intake valve.... Plus it's the one with the aluminum push rod....
👌