Do you have to leave the sides on the ramp? Would it be ok to not have the sides walls?
@GreenGoblin22724 күн бұрын
You need the sides. It’s what takes the round out of the magazine to the chamber.
@dylankufahl8002Ай бұрын
4:39 What grip module do you have?
@eric18jerifАй бұрын
Go and get some sleep bro.clean up your nails too.gnyt! Tnx for sharing.
@GreenGoblin227Ай бұрын
I made the review right after work. I’m a mechanic. Had a few minutes with out kids or wife near me so I did a quick video.
@TopRankFirearmsАй бұрын
How long does monsoon take ?
@MrAlexv1212Ай бұрын
I think the most important things I did was ramp the slide for the disconnecter and clear out the cerakote from the rails.
@GreenGoblin227Ай бұрын
Agree. I love this gun
@nasty98772Ай бұрын
Get that Chinese crap off that 4000 dollar American 1911😂. Obviously you didn’t put it on there to cut cost because you clearly have the money. Trijicon RCR?
@Phenom2606Ай бұрын
Looks absolutely fantastic!
@DumpsterFireSC2 ай бұрын
I’m going to do this to my Tisas DS carry. Love the video!
@TherealRonWick2 ай бұрын
It looks way better 👍🏾
@n55Rob2 ай бұрын
Can you tell me what size file you used to file the disco ramp?
@griffinhowell52212 ай бұрын
When you say you "polish" the feed ramp and chamber what are you using exactly? Nevr dull by hand or some really soft dremel attachment? Going to be doing mine this weekend and just want to have the right stuff.
@GreenGoblin2272 ай бұрын
I honestly used Flitz polish with a small barrel white buffing wheel on my dremel. but on flats i used 1200-3000 gritt with wd40 as a lubricant. various ranges prior to buffing it with polish to get a mirror smooth finish
@cornbreadbrown49613 ай бұрын
thanks bud
@Osprey19944 ай бұрын
I think the gun is capable of better. Kinds curious about the consistency that you get out of a ported barrel. The biggest thing keeping me away from porting, is the risk of screwing my accuracy.
@Osprey19944 ай бұрын
30ft with a 2011 or any performance handgun should print about that well. Even a G19 or P365XL with a dot should print a group about that size.
@GreenGoblin2274 ай бұрын
Agree, my alchemy shot just as good as my SVI sight tracker. Regretfully, sold both and still have my prodigy I’m going through again. The prodigy is one of my favorite 2011, probably because it’s one of the first guns in fit everything but the slide and frame.
@Osprey19944 ай бұрын
Mine has some hiccups out of the box. But I expect that with some TLC it will get where I want it to go. Then in the future...I may get a Platy or a Stacc...we'll see
@GreenGoblin2274 ай бұрын
Yeah I am looking for a platy right now. But unfortunately my roof has a leak so I need to set my priorities.
@jose.ramoscaban4 ай бұрын
You did hit the key points on where to sand and polish, people bash on this gun but they don’t want to spend the $ on a Stacatto, I really don’t get them haha. Nice video, and beautiful gun!
@Osprey19944 ай бұрын
Well, if the Tisas 2011's work out of the box, then it will be a bit of a head scratcher why Springfield's still struggle. In all fairness, the MAC 2011, is marginally cheaper than the Prodigy.
@GreenGoblin2274 ай бұрын
Yea, this gun has ran great for me. For what I have into it and purchased it for, I’m not into it much. In the midst, of doing another cheely grip, and complete recoat as the bazooka isn’t doing it for me anymore. N
@jose.ramoscaban4 ай бұрын
@@Osprey1994 I haven’t shot or messed with the Tisas but I will definitely look into it 🤙🏼.
@jose.ramoscaban4 ай бұрын
@@Osprey1994 I haven’t shot or messed with the Tisas but I will definitely look into it 🤙🏼.
@Chris099784 ай бұрын
Alchemy changed the grip material its not all polymer like the first ones had, the new grip is made out of carbon fiber with reinforced polymer, Alchemy does make the grip though its not someone else making it, alchemy themselves are making that grip module in house. On the other hand if you want Eli at alchemy to leave you alone or want him to shut up, you can replace the grip with any 2011 grip you desire
@quintinleong49674 ай бұрын
Is it just camera angle?, or is that a commander grip on yours?
@GreenGoblin2274 ай бұрын
Standard grip.
@TheAmerican19635 ай бұрын
Be still my beating heart !!!! I love that the Alchemy has classic lines ...... just beautiful !!!! 😍😍😍
@TheAmerican19635 ай бұрын
I have a 4.25 Prodigy with around 1000 rounds through it and almost all the ammo I used was freedom reman 115 grain round nose ....... no problems at all but my buddy who has a 5" Prodigy has some issues with their reman ammo ....... really nice weapon and good video !!! 🙂
@N.S.565 ай бұрын
How do you like the bead last blue finish
@blackcomet15 ай бұрын
What lower grip module is that and it looks a bit slim down from the original grip module for the prodigy could you let me know the name and if that is the case because I never really did like the thick look of the project grip module
@Osprey19944 ай бұрын
Looks like a Cheely
@impolite2n1p3r86 ай бұрын
But you hear the slide catching alway back it’s not completely smooth
@Big81Clos6 ай бұрын
What safety is that?
@jacksmith80026 ай бұрын
are you from the Boston area ?
@AngryFPSGamer6 ай бұрын
It's amazing how well tuned a gunsmith 1911 is compare to a production one.
@M1cRaa6 ай бұрын
Thanks!!
@Citizen2ACitizenLLC7 ай бұрын
Yup, I did mine even though I got a new now from EGW. Great video. Just sub'd.
@tompbz7 ай бұрын
nice!
@randyreviewsit8 ай бұрын
that group is absurd... damn I need to order mine.
@randyreviewsit8 ай бұрын
I love the shorter dust cover hoping to order mine soon. I have a prime elite now and yeah keep hearing this shoots as soft as all these comp'd 2011's I would say the lockup and the spring weight are probably dialed in better to account for that. Nice blaster!
@mclinedinst8 ай бұрын
That "what are you doing" at the 13 second mark scared the crap out of me.
@GreenGoblin2278 ай бұрын
lol.
@yeulakho65748 ай бұрын
nice💯
@angelturnhere86649 ай бұрын
Just did mine last night What lb spring is on that rod?
@GreenGoblin2279 ай бұрын
factory spring.
@fishsaysn09 ай бұрын
piece of art 🤌
@GreenGoblin2279 ай бұрын
thanks
@hud3550010 ай бұрын
Your video was exactly what I was looking for!
@GreenGoblin2279 ай бұрын
Glad it was helpful!
@vinzalarms507910 ай бұрын
Nice pistol 🔫
@GreenGoblin2279 ай бұрын
thanks!
@gemknives622910 ай бұрын
Who did your porting?
@GreenGoblin2279 ай бұрын
monsoon tactical!
@user-lm2mc1cx4v10 ай бұрын
가격 한국에살아요. 보내줄수 있나요
@zklnsgng10 ай бұрын
How much did you put into it? I’m debating doing something similar or just getting a staccato
@GreenGoblin2279 ай бұрын
honestly like 200 bucks in parts. porting was about 3-500. but not needed
@gsj081010 ай бұрын
Lol...I can't get my slide stop back in either. Wth?
@GreenGoblin2279 ай бұрын
some days better than others.
@jvz144810 ай бұрын
What Svi do you have? To say this is your favorite over that is pretty high praise
@GreenGoblin2279 ай бұрын
have had a few sight trackers.
@ruatahanghal512110 ай бұрын
You sounds like ummm ah.... E... U. Ahh ae.. Lis u.. E... A.. Haha
@nfa_Redd11 ай бұрын
ok what's the secret.?
@nfa_Redd11 ай бұрын
nice grip ..were u get it?
@michaell39711 ай бұрын
Les Baer lock up! Yep, and exactly where Mr. Rob learned how to do it. He worked with Mr. Les for a while. ;<) They both have the highest respect for one another. KnifeMaker
@TheNorthsquad Жыл бұрын
Why are so many people having failure to feed issues with prodigy?
@GreenGoblin227 Жыл бұрын
I’d say, it’s because the disconnector drags and slows the slide down. I polished mine and it was mint.
@ldrj2a..181 Жыл бұрын
So with all these extra parts is it still considered a Springfield?
@GreenGoblin227 Жыл бұрын
Yea. Frame and slide.
@AmmoJoe Жыл бұрын
How’s the Cheely treating you? Thinking about doing the same.
@GreenGoblin2274 ай бұрын
Cheely is amazing. It’s slimmer and gives a great grip.
@jknewb6276 Жыл бұрын
Damn man that Prodigy is noice!! Love the comp and the color!!!😍
Пікірлер
Do you have to leave the sides on the ramp? Would it be ok to not have the sides walls?
You need the sides. It’s what takes the round out of the magazine to the chamber.
4:39 What grip module do you have?
Go and get some sleep bro.clean up your nails too.gnyt! Tnx for sharing.
I made the review right after work. I’m a mechanic. Had a few minutes with out kids or wife near me so I did a quick video.
How long does monsoon take ?
I think the most important things I did was ramp the slide for the disconnecter and clear out the cerakote from the rails.
Agree. I love this gun
Get that Chinese crap off that 4000 dollar American 1911😂. Obviously you didn’t put it on there to cut cost because you clearly have the money. Trijicon RCR?
Looks absolutely fantastic!
I’m going to do this to my Tisas DS carry. Love the video!
It looks way better 👍🏾
Can you tell me what size file you used to file the disco ramp?
When you say you "polish" the feed ramp and chamber what are you using exactly? Nevr dull by hand or some really soft dremel attachment? Going to be doing mine this weekend and just want to have the right stuff.
I honestly used Flitz polish with a small barrel white buffing wheel on my dremel. but on flats i used 1200-3000 gritt with wd40 as a lubricant. various ranges prior to buffing it with polish to get a mirror smooth finish
thanks bud
I think the gun is capable of better. Kinds curious about the consistency that you get out of a ported barrel. The biggest thing keeping me away from porting, is the risk of screwing my accuracy.
30ft with a 2011 or any performance handgun should print about that well. Even a G19 or P365XL with a dot should print a group about that size.
Agree, my alchemy shot just as good as my SVI sight tracker. Regretfully, sold both and still have my prodigy I’m going through again. The prodigy is one of my favorite 2011, probably because it’s one of the first guns in fit everything but the slide and frame.
Mine has some hiccups out of the box. But I expect that with some TLC it will get where I want it to go. Then in the future...I may get a Platy or a Stacc...we'll see
Yeah I am looking for a platy right now. But unfortunately my roof has a leak so I need to set my priorities.
You did hit the key points on where to sand and polish, people bash on this gun but they don’t want to spend the $ on a Stacatto, I really don’t get them haha. Nice video, and beautiful gun!
Well, if the Tisas 2011's work out of the box, then it will be a bit of a head scratcher why Springfield's still struggle. In all fairness, the MAC 2011, is marginally cheaper than the Prodigy.
Yea, this gun has ran great for me. For what I have into it and purchased it for, I’m not into it much. In the midst, of doing another cheely grip, and complete recoat as the bazooka isn’t doing it for me anymore. N
@@Osprey1994 I haven’t shot or messed with the Tisas but I will definitely look into it 🤙🏼.
@@Osprey1994 I haven’t shot or messed with the Tisas but I will definitely look into it 🤙🏼.
Alchemy changed the grip material its not all polymer like the first ones had, the new grip is made out of carbon fiber with reinforced polymer, Alchemy does make the grip though its not someone else making it, alchemy themselves are making that grip module in house. On the other hand if you want Eli at alchemy to leave you alone or want him to shut up, you can replace the grip with any 2011 grip you desire
Is it just camera angle?, or is that a commander grip on yours?
Standard grip.
Be still my beating heart !!!! I love that the Alchemy has classic lines ...... just beautiful !!!! 😍😍😍
I have a 4.25 Prodigy with around 1000 rounds through it and almost all the ammo I used was freedom reman 115 grain round nose ....... no problems at all but my buddy who has a 5" Prodigy has some issues with their reman ammo ....... really nice weapon and good video !!! 🙂
How do you like the bead last blue finish
What lower grip module is that and it looks a bit slim down from the original grip module for the prodigy could you let me know the name and if that is the case because I never really did like the thick look of the project grip module
Looks like a Cheely
But you hear the slide catching alway back it’s not completely smooth
What safety is that?
are you from the Boston area ?
It's amazing how well tuned a gunsmith 1911 is compare to a production one.
Thanks!!
Yup, I did mine even though I got a new now from EGW. Great video. Just sub'd.
nice!
that group is absurd... damn I need to order mine.
I love the shorter dust cover hoping to order mine soon. I have a prime elite now and yeah keep hearing this shoots as soft as all these comp'd 2011's I would say the lockup and the spring weight are probably dialed in better to account for that. Nice blaster!
That "what are you doing" at the 13 second mark scared the crap out of me.
lol.
nice💯
Just did mine last night What lb spring is on that rod?
factory spring.
piece of art 🤌
thanks
Your video was exactly what I was looking for!
Glad it was helpful!
Nice pistol 🔫
thanks!
Who did your porting?
monsoon tactical!
가격 한국에살아요. 보내줄수 있나요
How much did you put into it? I’m debating doing something similar or just getting a staccato
honestly like 200 bucks in parts. porting was about 3-500. but not needed
Lol...I can't get my slide stop back in either. Wth?
some days better than others.
What Svi do you have? To say this is your favorite over that is pretty high praise
have had a few sight trackers.
You sounds like ummm ah.... E... U. Ahh ae.. Lis u.. E... A.. Haha
ok what's the secret.?
nice grip ..were u get it?
Les Baer lock up! Yep, and exactly where Mr. Rob learned how to do it. He worked with Mr. Les for a while. ;<) They both have the highest respect for one another. KnifeMaker
Why are so many people having failure to feed issues with prodigy?
I’d say, it’s because the disconnector drags and slows the slide down. I polished mine and it was mint.
So with all these extra parts is it still considered a Springfield?
Yea. Frame and slide.
How’s the Cheely treating you? Thinking about doing the same.
Cheely is amazing. It’s slimmer and gives a great grip.
Damn man that Prodigy is noice!! Love the comp and the color!!!😍