After, polishing and fitting all the internals, this thing runs like a swing machine.
Жүктеу.....
Пікірлер: 88
@JohnHolliday1911 Жыл бұрын
You seem…..fairly well practiced at that action! Lol
@chaddking8333
Жыл бұрын
Ha😐
@mauricehardy5012
10 ай бұрын
😂😂😂😂😂😂
@eddiearchuleta615 Жыл бұрын
I’d say after a good 1000-2000 rounds the gun will be butter smooth from the parts wearing in together
@mclinedinst8 ай бұрын
That "what are you doing" at the 13 second mark scared the crap out of me.
@GreenGoblin227
8 ай бұрын
lol.
@nineshotmat Жыл бұрын
Crazy fitting, nice .
@gunnutbikenut6939 Жыл бұрын
I have a Springfield operator it is so smooth
@HORRUS29 Жыл бұрын
How did you get it to be that smooth? Did you polish anything?
@GreenGoblin227
8 ай бұрын
I polished everything and filed a marvel disconnect cut into the bottom of my slide.
@RandomNylonGuy Жыл бұрын
How do you like the port? Thinking about getting either 4.25 or 5. 4.25 seems more balanced. What do you think?
@GreenGoblin227
Жыл бұрын
I’m a huge fan of the 5”. Probably because I’m 6’4 with large hands.
@GreenGoblin227
Жыл бұрын
Port works amazing. 0 recoil
@oceaser6977
Жыл бұрын
Who did the porting?
@GreenGoblin227
Жыл бұрын
@@oceaser6977 monsoon tactical. There is another company in Florida that does it too. Saw it on Reddit.
@tommymorgan9293
Жыл бұрын
@@GreenGoblin227 who is the place in florida?
@eddiearchuleta615 Жыл бұрын
I finally took my 5 inch out it ate every round inthrough at it from weak 115 to that hottest 115 I have ever shot the Winchester active duty
@GreenGoblin227
Жыл бұрын
Mine hates reloads. Because the cases are not inspect.
@osmanaga9667Сағат бұрын
This is marvel cut ain't ?
@Zacharya19 Жыл бұрын
Who does your custom work
@RockOfAgesCFM Жыл бұрын
What all did you do to it? I’ve got a staccato that is quite gritty
@wakeyourazzup
Жыл бұрын
Same. I think its the recoil spring. I got the p and its for duty use so i dont mind it so much
@AS-vk4kf Жыл бұрын
How did you get it to that smoothness
@GreenGoblin227
Жыл бұрын
Smoothed the disconnector, polished everything possible. You can take a little pressure off the disconnect spring on the sear spring to keep the disconnector from sticking up so far that slows down the slide. Just time and energy made a world of difference. Also filed in a disconnect ramp on the bottom of the slide.
@hellyaistunt Жыл бұрын
I would have found this pew more interesting if they would have nitride finished frame and slide. Ceracoat is a bad idea for the long tightly fit slide to frame as the coating will gull up after some use. After gulling starts will take hundreds of rounds to clear up and be reliable unless fitted way lose.
@WembleyGaming Жыл бұрын
A nice trigger to go with it Boshhhhhh
@sv2697 Жыл бұрын
Who did the port job and how much?
@Jawnwickk
Жыл бұрын
monsoon tactical. Around $500
@MahoneyBadger Жыл бұрын
We call him “Just one take Justin”
@GreenGoblin227
Жыл бұрын
Sounds good. I’ll get more videos at some point. Don’t really have the ability to edit and insert videos. Sorry to disappoint.
@MahoneyBadger
Жыл бұрын
@@GreenGoblin227 not disappointing at all, just funny, absolutely still left a like!
@MrAlexv1212Ай бұрын
I think the most important things I did was ramp the slide for the disconnecter and clear out the cerakote from the rails.
@GreenGoblin227
Ай бұрын
Agree. I love this gun
@SiegoderWalhalla9B Жыл бұрын
1911.... aaaaaahhhhhhhhhhhh. Totally satisfied now. Gotta go change my underwear.
@TheRealZJE313 Жыл бұрын
Did I come from the Factory like that or did you do something too it? Cause if you did you could have voided your lifetime warranty
@GreenGoblin227
Жыл бұрын
Not worried at all about my warranty. Once the barrel and slide got ported that went out the window. None of my 1911/2011 are stock. I bought this just for the grip and slide assembly. Sold the grip, built a cheely grip and all hard tool steel parts. Still way cheaper than a staccato P.
@TheRealZJE313
Жыл бұрын
@@GreenGoblin227 o ok. What do you think about Wilson (SFX9,SFT9,EDC X9)combat vs staccato?
@GreenGoblin227
Жыл бұрын
@@TheRealZJE313 lots of my buddies have them. But they are not for me. I’ve had several Wilson combats and sold them all. My friends all enjoy them. But my friends who have shot my prodigy all are amazed and waiting for 5” models to get back in stock. Can’t go wrong with either I’d say.
@TheRealZJE313
Жыл бұрын
@@GreenGoblin227 o ok. I think people are caught up in the hype of staccato.cause soon as I say something about Wilson combat is better theI staccato Fan boys go crazy
@GreenGoblin227
Жыл бұрын
@@TheRealZJE313 yea, I’m sure sig will drip a 2011 p320 soon too.
@NEEZY69 Жыл бұрын
Who did your porting?
@GreenGoblin227
Жыл бұрын
Monsoon tactical
@anhcu714 Жыл бұрын
What did you have to upgrade to make it rack so smooth?
@GreenGoblin227
Жыл бұрын
I polished and stoned everything. If you see my other videos it shows what I did n
@Angels_Armory Жыл бұрын
Where did you get the barrel ported and did your slide work?
@GreenGoblin227
Жыл бұрын
Monsoon Tactical. - Vinny
@tubbs200803 Жыл бұрын
Sounds like a swiss k31
@nfa_Redd11 ай бұрын
ok what's the secret.?
@TheNorthsquad Жыл бұрын
Why are so many people having failure to feed issues with prodigy?
@GreenGoblin227
Жыл бұрын
I’d say, it’s because the disconnector drags and slows the slide down. I polished mine and it was mint.
@nineshotmat Жыл бұрын
Does it have any con for barrel and the slide is too fit?
@GreenGoblin227
Жыл бұрын
The frame and slide fit is factory from springfield. I haven’t touched anything.
@nineshotmat
Жыл бұрын
@@GreenGoblin227 yeah But Does the gun that fit too much have a con ?
@christopherwilliams6048
Жыл бұрын
@@nineshotmat tighter tolerances will mean more cleaning depending on use of the firearm
@impolite2n1p3r86 ай бұрын
But you hear the slide catching alway back it’s not completely smooth
@WheelchairOperator Жыл бұрын
Genghis Komp?
@GreenGoblin227
Жыл бұрын
The porting in the front of the slide/barrel. Monsoon Tactical machines this option.
@WheelchairOperator
Жыл бұрын
@@GreenGoblin227 Yeah, I just didn’t know if it was the Genghis Komp or the Chunk Port on this. Both are done by Monsoon, I believe. Was thinking about doing it myself for the past few months.
@GreenGoblin227
Жыл бұрын
@@WheelchairOperator genghis comp. Works very well
@gemknives6229 Жыл бұрын
How much for you to do that to Mine?
@user-lm2mc1cx4v10 ай бұрын
가격 한국에살아요. 보내줄수 있나요
@metatronmen2431 Жыл бұрын
A super smooth slide is prone to a super smooth feeding failure and a premature frame/slide damage.
@GreenGoblin227
Жыл бұрын
I've never had an issue with my infinity or any of my other guns that are this slick and smooth.. But ill keep an eye out.
@tommymorgan9293
Жыл бұрын
Tell that to Atlas gun works, Infinity, Phoenix trinity.
@TheUnknownaccent Жыл бұрын
The surface finish where the slide moves on must be insanely low
@GreenGoblin227
Жыл бұрын
the finish basically wore off after some range visits, i just polished it.. I didn't sand them aggressively... thing i used 5000 grit, with some polish.. Ill probably have the frame welded and refit or talk to doug for some accrurails.
@christopherwilliams6048
Жыл бұрын
@@GreenGoblin227 evolution armory does frame welding and fitting for $350
@9mmwill Жыл бұрын
That was conceded sex.
@lovelore Жыл бұрын
Because its a fixed barrel
@GreenGoblin227
Жыл бұрын
It needed to have everything polished and the disconnector reshaped to optimize the smoothness. Before If i pulled the slide back, the slide would hang/stop on the disco. little tic helped a ton.
@jknewb6276 Жыл бұрын
That is beautiful I want my XDs Mod2 OSP done like this who wants to try it? 🫣
@GreenGoblin227
Жыл бұрын
Monsoon Tactical did the porting.
@gemknives622910 ай бұрын
Who did your porting?
@GreenGoblin227
9 ай бұрын
monsoon tactical!
@hellyaistunt Жыл бұрын
I would have found this pew more interesting if they would have nitride finished frame and slide. Ceracoat is a bad idea for the long tightly fit slide to frame as the coating will gull up after some use. After gulling starts will take hundreds of rounds to clear up and be reliable unless fitted way lose.
@GreenGoblin227
Жыл бұрын
Once I get it all squared away, welding the rails to make the fit a little better, I’ll have the whole gun DLC’d. It’s just a toy to play with. Couldn’t justify the sandhawk price and didn’t want to buy an xc.
@GreenGoblin227
Жыл бұрын
Ive had no issues with Cerakote. My Business End Customs 1911 is coated and runs like a top too... but also comparing 1200 dollar prodigy to a 12k 1911.
@hellyaistunt
Жыл бұрын
@Justin Pelletier I'm sure will become loser over time if runs well from jump. I was aerospace machinist for 8 years when parts require coating we factor into tolerance. We know precisely how thick coating will be and deduct from final demetion.
@GreenGoblin227
Жыл бұрын
@@hellyaistunt yea, I’m sure it will. This is just a hobby/fiddle gun. I’ll eventually have the rails welded and fit. The get the whole gun DLC’d
Пікірлер: 88
You seem…..fairly well practiced at that action! Lol
@chaddking8333
Жыл бұрын
Ha😐
@mauricehardy5012
10 ай бұрын
😂😂😂😂😂😂
I’d say after a good 1000-2000 rounds the gun will be butter smooth from the parts wearing in together
That "what are you doing" at the 13 second mark scared the crap out of me.
@GreenGoblin227
8 ай бұрын
lol.
Crazy fitting, nice .
I have a Springfield operator it is so smooth
How did you get it to be that smooth? Did you polish anything?
@GreenGoblin227
8 ай бұрын
I polished everything and filed a marvel disconnect cut into the bottom of my slide.
How do you like the port? Thinking about getting either 4.25 or 5. 4.25 seems more balanced. What do you think?
@GreenGoblin227
Жыл бұрын
I’m a huge fan of the 5”. Probably because I’m 6’4 with large hands.
@GreenGoblin227
Жыл бұрын
Port works amazing. 0 recoil
@oceaser6977
Жыл бұрын
Who did the porting?
@GreenGoblin227
Жыл бұрын
@@oceaser6977 monsoon tactical. There is another company in Florida that does it too. Saw it on Reddit.
@tommymorgan9293
Жыл бұрын
@@GreenGoblin227 who is the place in florida?
I finally took my 5 inch out it ate every round inthrough at it from weak 115 to that hottest 115 I have ever shot the Winchester active duty
@GreenGoblin227
Жыл бұрын
Mine hates reloads. Because the cases are not inspect.
This is marvel cut ain't ?
Who does your custom work
What all did you do to it? I’ve got a staccato that is quite gritty
@wakeyourazzup
Жыл бұрын
Same. I think its the recoil spring. I got the p and its for duty use so i dont mind it so much
How did you get it to that smoothness
@GreenGoblin227
Жыл бұрын
Smoothed the disconnector, polished everything possible. You can take a little pressure off the disconnect spring on the sear spring to keep the disconnector from sticking up so far that slows down the slide. Just time and energy made a world of difference. Also filed in a disconnect ramp on the bottom of the slide.
I would have found this pew more interesting if they would have nitride finished frame and slide. Ceracoat is a bad idea for the long tightly fit slide to frame as the coating will gull up after some use. After gulling starts will take hundreds of rounds to clear up and be reliable unless fitted way lose.
A nice trigger to go with it Boshhhhhh
Who did the port job and how much?
@Jawnwickk
Жыл бұрын
monsoon tactical. Around $500
We call him “Just one take Justin”
@GreenGoblin227
Жыл бұрын
Sounds good. I’ll get more videos at some point. Don’t really have the ability to edit and insert videos. Sorry to disappoint.
@MahoneyBadger
Жыл бұрын
@@GreenGoblin227 not disappointing at all, just funny, absolutely still left a like!
I think the most important things I did was ramp the slide for the disconnecter and clear out the cerakote from the rails.
@GreenGoblin227
Ай бұрын
Agree. I love this gun
1911.... aaaaaahhhhhhhhhhhh. Totally satisfied now. Gotta go change my underwear.
Did I come from the Factory like that or did you do something too it? Cause if you did you could have voided your lifetime warranty
@GreenGoblin227
Жыл бұрын
Not worried at all about my warranty. Once the barrel and slide got ported that went out the window. None of my 1911/2011 are stock. I bought this just for the grip and slide assembly. Sold the grip, built a cheely grip and all hard tool steel parts. Still way cheaper than a staccato P.
@TheRealZJE313
Жыл бұрын
@@GreenGoblin227 o ok. What do you think about Wilson (SFX9,SFT9,EDC X9)combat vs staccato?
@GreenGoblin227
Жыл бұрын
@@TheRealZJE313 lots of my buddies have them. But they are not for me. I’ve had several Wilson combats and sold them all. My friends all enjoy them. But my friends who have shot my prodigy all are amazed and waiting for 5” models to get back in stock. Can’t go wrong with either I’d say.
@TheRealZJE313
Жыл бұрын
@@GreenGoblin227 o ok. I think people are caught up in the hype of staccato.cause soon as I say something about Wilson combat is better theI staccato Fan boys go crazy
@GreenGoblin227
Жыл бұрын
@@TheRealZJE313 yea, I’m sure sig will drip a 2011 p320 soon too.
Who did your porting?
@GreenGoblin227
Жыл бұрын
Monsoon tactical
What did you have to upgrade to make it rack so smooth?
@GreenGoblin227
Жыл бұрын
I polished and stoned everything. If you see my other videos it shows what I did n
Where did you get the barrel ported and did your slide work?
@GreenGoblin227
Жыл бұрын
Monsoon Tactical. - Vinny
Sounds like a swiss k31
ok what's the secret.?
Why are so many people having failure to feed issues with prodigy?
@GreenGoblin227
Жыл бұрын
I’d say, it’s because the disconnector drags and slows the slide down. I polished mine and it was mint.
Does it have any con for barrel and the slide is too fit?
@GreenGoblin227
Жыл бұрын
The frame and slide fit is factory from springfield. I haven’t touched anything.
@nineshotmat
Жыл бұрын
@@GreenGoblin227 yeah But Does the gun that fit too much have a con ?
@christopherwilliams6048
Жыл бұрын
@@nineshotmat tighter tolerances will mean more cleaning depending on use of the firearm
But you hear the slide catching alway back it’s not completely smooth
Genghis Komp?
@GreenGoblin227
Жыл бұрын
The porting in the front of the slide/barrel. Monsoon Tactical machines this option.
@WheelchairOperator
Жыл бұрын
@@GreenGoblin227 Yeah, I just didn’t know if it was the Genghis Komp or the Chunk Port on this. Both are done by Monsoon, I believe. Was thinking about doing it myself for the past few months.
@GreenGoblin227
Жыл бұрын
@@WheelchairOperator genghis comp. Works very well
How much for you to do that to Mine?
가격 한국에살아요. 보내줄수 있나요
A super smooth slide is prone to a super smooth feeding failure and a premature frame/slide damage.
@GreenGoblin227
Жыл бұрын
I've never had an issue with my infinity or any of my other guns that are this slick and smooth.. But ill keep an eye out.
@tommymorgan9293
Жыл бұрын
Tell that to Atlas gun works, Infinity, Phoenix trinity.
The surface finish where the slide moves on must be insanely low
@GreenGoblin227
Жыл бұрын
the finish basically wore off after some range visits, i just polished it.. I didn't sand them aggressively... thing i used 5000 grit, with some polish.. Ill probably have the frame welded and refit or talk to doug for some accrurails.
@christopherwilliams6048
Жыл бұрын
@@GreenGoblin227 evolution armory does frame welding and fitting for $350
That was conceded sex.
Because its a fixed barrel
@GreenGoblin227
Жыл бұрын
It needed to have everything polished and the disconnector reshaped to optimize the smoothness. Before If i pulled the slide back, the slide would hang/stop on the disco. little tic helped a ton.
That is beautiful I want my XDs Mod2 OSP done like this who wants to try it? 🫣
@GreenGoblin227
Жыл бұрын
Monsoon Tactical did the porting.
Who did your porting?
@GreenGoblin227
9 ай бұрын
monsoon tactical!
I would have found this pew more interesting if they would have nitride finished frame and slide. Ceracoat is a bad idea for the long tightly fit slide to frame as the coating will gull up after some use. After gulling starts will take hundreds of rounds to clear up and be reliable unless fitted way lose.
@GreenGoblin227
Жыл бұрын
Once I get it all squared away, welding the rails to make the fit a little better, I’ll have the whole gun DLC’d. It’s just a toy to play with. Couldn’t justify the sandhawk price and didn’t want to buy an xc.
@GreenGoblin227
Жыл бұрын
Ive had no issues with Cerakote. My Business End Customs 1911 is coated and runs like a top too... but also comparing 1200 dollar prodigy to a 12k 1911.
@hellyaistunt
Жыл бұрын
@Justin Pelletier I'm sure will become loser over time if runs well from jump. I was aerospace machinist for 8 years when parts require coating we factor into tolerance. We know precisely how thick coating will be and deduct from final demetion.
@GreenGoblin227
Жыл бұрын
@@hellyaistunt yea, I’m sure it will. This is just a hobby/fiddle gun. I’ll eventually have the rails welded and fit. The get the whole gun DLC’d