Пікірлер

• 
  @davidoconnell383420 сағат бұрын

  🙏 So sorry for your loss

• 
  @IvansBikesBmws22 сағат бұрын

  Would you say this is a good buy if I try this on my golf vw? I think it works very well on smaller cars?

• 
  @joshuasutton4043Күн бұрын

  Nice z bro

• 
  @ajd53632 күн бұрын

  Hard work? Lol polishing glass is not hard work.

• 
  @YUENFELIX12 күн бұрын

  That's alot of work testing it lol .. thumbs up😊

• 
  @delavan91413 күн бұрын

  0.4 amps. Hard pass.

• 
  @hotdogandahayride98234 күн бұрын

  Can someone explain to me what paint correction actually is and why CRI matters? What's being corrected? The paint or the clearcoat?

• 
  @jonathandavis33124 күн бұрын

  Hybrid Solutions is 15 bucks and performs almost as well as these and a kindergartner could apply it.

• 
  @radekliko5264 күн бұрын

  Thanks for the video content. I recently ordered Flex XFE 15 150 18.0 and Flex PXE 80 10.8 on which I would like to build up my skillset and later offer my detailing services in Switzerland. Heard Flex can be a little under powered. However, once my skills develop while cars paint quality varies. Would you suggest in order to add value to my tool collecting to order 21 Milwaukee as being the better choice or still 15 Milaukee despite I already have Flex 15. The point I would like to make is to avoid buying two same tools without adding value.

• 
  @RedfalconX4 күн бұрын

  I personally use the nanobond and for the price. I don't think I've seen any better especially how crazy the nano bond can help a poorly maintained vehicle.

• 
  @saltsea94995 күн бұрын

  @3:09 sounds like the brushes grinding, probably a brushed unit

• 
  @indelibledotink5 күн бұрын

  'Impressive' - Darth Vader. Mahalo for the great vid!

• 
  @jatco846 күн бұрын

  I used to do it all by hand on my '94 Mazda..but then I had it X-Koted (clear coated)..now I need to revitalize the dingy age..This may be something I can use to help with the process... Thx for your vid..!

• 
  @rsngrl6 күн бұрын

  did you ever try and adjust the counterbalance?

• 
  @OmniscientSloth6 күн бұрын

  Which is the best graphene coating? And if the best is pretty expensive, is there a lower priced coating that’s about just as good?

• 
  @gotahave7 күн бұрын

  Are you kidding me? The backing plate is smaller and weighs less so as far as balance on your 2X4 is concerned it was the smaller pad equaled out the balance position. Also while we are on the backing plate, the plate is probable better balanced the the one from Harbor Freight and it being small it has less rotating mass and thus less vibration. I personally don’t think the grease did not nor will not effect the longevity of the Bauer polisher if your a DIY’er that may use it once or twice a year but if your doing it for/as a business then the grease( any good name brand grease) will add to its longevity. IMHO

• 
  @ZayadShahid8 күн бұрын

  Does the manual transmission have a filter???

• 
  @samueladams5849 күн бұрын

  Im in Florida. So don't use carnuba wax lol.... Im looking for a filler wax to try and help out a 14 year old Honda paint "pitting"

• 
  @CaptnCrampon9 күн бұрын

  Thanks!

• 
  @leegengxiang217310 күн бұрын

  My condolences for your loss, I can't imagine how hard it is. We shall meet on that beautiful shore.

• 
  @pogijensen10 күн бұрын

  When are you coming back? I love these videos!

• 
  @delwynjshelleyjr543411 күн бұрын

  😂😂

• 
  @mountredgames122911 күн бұрын

  excellent work mate the best comparison ive ever seen ive used Fantastic XML unfortunately didn't get to see this video before having the job done, has been around 2 week now, ill update after 1 month passes to tell about the product performance in the one month update video

• 
  @MiguelGuevara-ru1vz11 күн бұрын

  How you get rid off the water spots?

• 
  @mikedraughn136912 күн бұрын

  How about something on the balance adjustment for the Bauer to smooth it out?

• 
  @ronchang979112 күн бұрын

  2:17 What is the size of the allen key in the middle that allows you to pull this off? I can't seem to find a metric that fits in the center. Thanks for the breakdown!

• 
  @dannyrexknight13 күн бұрын

  Putting your pad on evenly will reduce vibration.

• 
  @beatdownBane14 күн бұрын

  Thank you so much Scott, I think I speak for everyone when I say we love you and hope one day you return to bless us. If not, that's okay too because you've impressed great knowledge that can't be taken away. For anyone else watching this/reading this: If you are like me and used this video as a basis for your first paint correction, harbor freight now sells clay with lube. Additionally harbor freight also sells cheap nitrite gloves which I highly recommend and they now have the spray ceramic that Scott uses in the video. I myself went with Griots which scott tested as one of the top performers in one of his comparison videos that can be found at a local auto parts store. To take it a step further and again if you are like me and this is your first time I recommend spreading this out to a two day job especially if it's a truck or large vehicle (i did a dodge challenger) I'm ocd and had to spend a lot of time telling myself I won't get perfection. Day 1 I recommend wash, dry, clay, dry, tape your plastics and nooks really well. If its your first time you are going to sling some of this stuff, its gonna happen. Then cut and wipe down. Day 2 alcohol wipe down. Polish, alcohol wipe down then wax ceramic. This won't help as much for anyone without anywhere to store the vehicle and its just my first time so I'm sure there are other ways to do it but this just my 2 cents. Good luck everyone, much love to all!

• 
  @TrueGritDetail3415 күн бұрын

  Scott, youre missed. Hope all is well.

• 
  @shahnulislam989715 күн бұрын

  the professional side has a tighter bleeding of the light than the walmart side.

• 
  @DTKRDMNK16 күн бұрын

  LOVE THIS KIT/POLISHER

• 
  @bluegrasscrazy730716 күн бұрын

  Sorry for your loss prayers sent

• 
  @Xedos7516 күн бұрын

  Huge loss for all the car enthusiasts. It was the only channel I joined and never saw a better one. ❤

• 
  @sushantgore380617 күн бұрын

  Thanks

• 
  @theautoman2217 күн бұрын

  Great videos as a guy that just takes out deep scratches doesn't do over all polishing i'll stick with my corded buffers.

• 
  @ps2cho17 күн бұрын

  This is interesting because I tested AS9 and at the exact same time a neighbor let me test Gyeon Mohs, the AS9 has already failed 18 months later while Gyeon is still performing well. I wouldn’t buy AS9 again.

• 
  @hughjeffncok18 күн бұрын

  How would you get in the channels on the roof? Great results btw!

• 
  @TheMigs8719 күн бұрын

  Performance Popoman or this Bauer?

• 
  @sumpoosieguy20 күн бұрын

  MAPP gas torch did my Sprinter bumper nice and easy with swirl torch tip

• 
  @afore240720 күн бұрын

  good day friend. I have a question about a 15mm. I bought one and I realized that by putting my finger on the pad, I can stop it from rotating on its own axis but not the orbital movement, I remove my finger and it rotates again on its same axis. Is it normal or do you think it broke down? I have only used the item once

• 
  @r.k86220 күн бұрын

  Hi Scott. What's the best ceramic coating for a polished out oxidized paint that will not allow oxidisation of clearcoat to appear again? I heard someone said cquartz 3.0

• 
  @usagimoto142322 күн бұрын

  Hope you’re in a healthy state of mind, mentally n physically.

• 
  @cyber70222 күн бұрын

  Great video!!!

• 
  @bbaaspencer122 күн бұрын

  I bought grios garage twice and both times the sprayer😢 was defective. I emailed them and got ghosted. Won’t buy it again!

• 
  @bbaaspencer122 күн бұрын

  You are awesome!

• 
  @bird669123 күн бұрын

  You stole my hood

• 
  @bird669123 күн бұрын

  When they are testing on the animals do they polish the rat before? I wondering if polishing your rat increases the adhesion.

• 
  @nanodrbright317325 күн бұрын

  All done wrong

• 
  @15DurangoRT25 күн бұрын

  Adams VHT is not ceramic.

• 
  @moe477226 күн бұрын

  I've used Adam's Graphene coat and sure enough the beading action did not even last a year and bear in mind I hardly drive far, etc...