I agree completely with the full-length sizing! I made Master level in NRA F(tr) class shooting 308 Win. out to 600 and 1,000 yards by full-length sizing and using the Redding dies with the customizable neck bushing. It gave me accuracy of sub 1/4 MOA (back in 2012!) and helped me be successful. I'm ordering my Zero press next week and I've already ordered your die rings for it, so I can't wait to get it set up! Now I shoot USPSA handguns!
@Colt1927AC2 жыл бұрын
My Zero arrived today along with an additional turret and anvil seating anvil. I mounted on an InLine top plate.
@Nobody_inportant2 жыл бұрын
I just bought a Zero. Can I load .50 BMG on it. I know with the Chytac size cases you have to scoop them in and I assume it would be the same with the .50 BMG. I plan on ordering a hybrid head with the half 1 1/4 die thread patterns. And I only plan on loading about 200 to 250 rounds a year. Just curious if it will do 50 BMG and what shell holder I would need for the ram?
@area419
2 жыл бұрын
No, the ZERO cannot accept 50-class shellholders
@aakoksal2 жыл бұрын
I always lock my dies when there is a case inside, to me that makes sure die is as centre as it can be to the ram… wWith all the coarse class 2 threading you mentioned earlier, how can you be sure that that die is perfectly axial with the ram?
@RyanMcIntyre
Жыл бұрын
Threads are self-centering, the pressure applied with the ram will ensure the die is centered within its bore. That’s still no guarantee that the die centerline and ram centerline are aligned, but that’s why you pay for good tools like from Area 419
@hank31522 жыл бұрын
If you set your seating die deep where there is full thread contact on the turret then how do you prevent it from crimping?
@RyanMcIntyre
Жыл бұрын
Match dies don’t crimp. You’ll have to use another method to set up a standard seating die.
@papaquette59433 жыл бұрын
I’m just waiting for my locking die rings and wrench. When do you think they will be available?
@OFFICIALUND
3 жыл бұрын
They're live now, man. Go get em
@cjejuni2 жыл бұрын
nice but not in stock.
@area419
2 жыл бұрын
Make sure you are signed up for restock notifications, they've been running on the lathes fairly constantly for months.
@avalt01342 жыл бұрын
chill with the price tho
@NoelLucas
2 жыл бұрын
Quality and good people go hand-hand. Neither is cheap.
Пікірлер: 14
I agree completely with the full-length sizing! I made Master level in NRA F(tr) class shooting 308 Win. out to 600 and 1,000 yards by full-length sizing and using the Redding dies with the customizable neck bushing. It gave me accuracy of sub 1/4 MOA (back in 2012!) and helped me be successful. I'm ordering my Zero press next week and I've already ordered your die rings for it, so I can't wait to get it set up! Now I shoot USPSA handguns!
My Zero arrived today along with an additional turret and anvil seating anvil. I mounted on an InLine top plate.
I just bought a Zero. Can I load .50 BMG on it. I know with the Chytac size cases you have to scoop them in and I assume it would be the same with the .50 BMG. I plan on ordering a hybrid head with the half 1 1/4 die thread patterns. And I only plan on loading about 200 to 250 rounds a year. Just curious if it will do 50 BMG and what shell holder I would need for the ram?
@area419
2 жыл бұрын
No, the ZERO cannot accept 50-class shellholders
I always lock my dies when there is a case inside, to me that makes sure die is as centre as it can be to the ram… wWith all the coarse class 2 threading you mentioned earlier, how can you be sure that that die is perfectly axial with the ram?
@RyanMcIntyre
Жыл бұрын
Threads are self-centering, the pressure applied with the ram will ensure the die is centered within its bore. That’s still no guarantee that the die centerline and ram centerline are aligned, but that’s why you pay for good tools like from Area 419
If you set your seating die deep where there is full thread contact on the turret then how do you prevent it from crimping?
@RyanMcIntyre
Жыл бұрын
Match dies don’t crimp. You’ll have to use another method to set up a standard seating die.
I’m just waiting for my locking die rings and wrench. When do you think they will be available?
@OFFICIALUND
3 жыл бұрын
They're live now, man. Go get em
nice but not in stock.
@area419
2 жыл бұрын
Make sure you are signed up for restock notifications, they've been running on the lathes fairly constantly for months.
chill with the price tho
@NoelLucas
2 жыл бұрын
Quality and good people go hand-hand. Neither is cheap.