link below is an affiliate link that helps the channel with any purchase. All Balls Jet Block Gasket: amzn.to/3UAXeDS
Жүктеу.....
Пікірлер: 8
@jamescundiff326423 күн бұрын
This fixed my issue with my 250 running like dog shit up top. Couldn't figure it out. Was dumping fuel up top because the gasket was bad
@jamesonkruger6989 Жыл бұрын
I'm building one right now there's definetly two different gaskets. I believe the one with the tiny single hole side is called a short body pwk. The other one has a bigger single side that is at an angle like the other side.
@marioguzman9290 Жыл бұрын
Great to hear that your bike runs good now. My 01 Yz250 will just not idle I cleaned the carb many times and seems to run rich but other videos on here say that it's a lean condition, how can it be lean and rich at the same time? So yeah I'm gonna swap that gasket out. Thanks for the video! I just ordered mine on ebay said was 2000-2019 YZ250 I hope I got the correct one.
@themotobarn702
Жыл бұрын
What is your jetting at and what's your elevation? Have you checked your stator and coil? Good main crank seals?
@roberttrimble63613 ай бұрын
Was the All Balls gasket the same thickness as the OE? I've seen some negative reviews on other suppliers gaskets as being thinner and not sealing correctly.
@themotobarn702
3 ай бұрын
I never measured with calipers, but they looked identical to me and the bike has been running perfectly ever since.
Пікірлер: 8
This fixed my issue with my 250 running like dog shit up top. Couldn't figure it out. Was dumping fuel up top because the gasket was bad
I'm building one right now there's definetly two different gaskets. I believe the one with the tiny single hole side is called a short body pwk. The other one has a bigger single side that is at an angle like the other side.
Great to hear that your bike runs good now. My 01 Yz250 will just not idle I cleaned the carb many times and seems to run rich but other videos on here say that it's a lean condition, how can it be lean and rich at the same time? So yeah I'm gonna swap that gasket out. Thanks for the video! I just ordered mine on ebay said was 2000-2019 YZ250 I hope I got the correct one.
@themotobarn702
Жыл бұрын
What is your jetting at and what's your elevation? Have you checked your stator and coil? Good main crank seals?
Was the All Balls gasket the same thickness as the OE? I've seen some negative reviews on other suppliers gaskets as being thinner and not sealing correctly.
@themotobarn702
3 ай бұрын
I never measured with calipers, but they looked identical to me and the bike has been running perfectly ever since.
Thanks man!
@themotobarn702
Жыл бұрын
No problem. I'm glad it helped!