Wow, you guys are the best! I’m so sorry I wasn’t able to clean him out better for ya, but it was a pretty hectic few days before I had to leave for Tennessee! Thank you for taking such good care of my baby and I hope my reaction wasn’t too much, but I’ve never seen him stripped down like that in person - it was quite the shock! 😅😅

@OldGriz708

2 жыл бұрын

Hollie, did you buy MM new or used??

@gregeigsti3280

2 жыл бұрын

Holly, would appreciate knowing more about the Jeep hood lock. Thank you and awesome Jeep you have!

@MischiefMakerTV

2 жыл бұрын

@@OldGriz708 he was purchased brand new in June 2017 and reached his current build level (with a few changes having happened since then) by March 2019.

@grassfolk

2 жыл бұрын

This seems like a lot. Is it just time for a build upgrade, or are there particular things he needs the dr to look after?

@toddhoffmaster6057

2 жыл бұрын

Would love to see an LS swap in MM. Watching them take MM apart has shown me more details that this Jeep is hiding. How do you like the PRP seats, as I am going to be buying new seats soon for my JK.

Back when I was working at Oldsmobile a car came in with a rattle in the passenger rear seat area. The guys had looked at everything they could think of to find it to no avail. The GM rep doing warranty follow-up stuff saw the tech struggling. He walked over and asked if he was looking for a rattle coming from the passenger rear seat. When the tech told him yes, he grabbed the cutting wheel and cut a hole in the door jam and there were two beer cans stuck in there. Apparently, some guy at the factor was retiring and on his last day there he put two beer cans in all the cars he made, lol.

@MischiefMakerTV

2 жыл бұрын

😂😂 we found quite a few beer cans insulating the walls of our house during renovation.

@xxshevilxx

2 жыл бұрын

@@MischiefMakerTV In So Cal those would rattle too, I felt that 4.2 the other day.

@randytravis3998

2 жыл бұрын

@@MischiefMakerTV found some in a old rock foundation under a house also found beer cans in old block buildings when they take them down ,, workers must of been thirsty when building the walls many years ago ,,

@ninakincade602

2 жыл бұрын

You should see how many cans, trash, tools, screws they leave in RV builds.

@Rat-Builder

2 жыл бұрын

Way back in 1968, I worked for 2 months at a Cadillac dealership, and they had a banging in the drivers door of a new Caddy. We did the same with a cutting wheel, and inside was a Coke bottle hanging on a string, There was a note inside that said, "This was a bitch to find wasn't it?" Some factory reps flew out and took the bottle back with them along with all of the information about the build day. They said that they were going to check for fingerprints on the bottle. Every mechanic in the shop had touched that bottle! LOL One other time I worked at a Buick dealer, and I had a car that would blow the taillight fuse. I decided that there had to be some issue under the carpet. I took all of the seats out so that I could remove the carpet, and found a HORSESHOE nail drove down thru the ribbon wire for the rear lights. One other time a disgruntled worker at Caterpillar took a chisel and put a huge ding in the rear main journal of the crankshaft. I don't remember which engine it was for, but the crankshafts could not be repaired, and were all scrapped. Hundreds were destroyed. The factories do have issues from time to time it seems.

It's awesome to see how much Robby has got work through Matt and Matt himself!

@paulriversred738

2 жыл бұрын

You are correct but he has had alot of work from insurance companies from insurance claims over the years he stays covered up on those I'm surprised he has time to even do other projects like these for people he is and has been a very busy man/company but I'm sure the more work the better lol.. I believe he needs more employees lol

@katedaphne4495

2 жыл бұрын

The work from Matt is nothing. It just improves his shows ratings.

@TrevorDennis100

2 жыл бұрын

@@katedaphne4495 Matt's vehicles were freebees, but Hollie surely won't be getting all this work done for nothing.

The highest paying sponsors want the best looking Jeep. So far, Hollie holds that spot. Not only does Hollie have great business sense, she can weld. -- A dangerous combo. ---

Hey boys try and figure out the squeaky suspension 🙏🏻

@timothycontreras8424

2 жыл бұрын

Neoprene bushings, and graphite ! Worked for me!🌵👍

This going to be a killer refresh!!! Man I miss when my kids where that age!!!! 👍👍👍

You found the annoying squeak, awesome! Now we expect you to get rid of it! Thanks for the video.

Myself and my husband wouldn’t miss your posts! Really love your content! You guy really work as a team! Your baby is so happy and sweet!

Hillbilly made my day with the bread , have Hollie sign the console for the Bronco 😉

The Banana, the Golden Nugget and now Mischiefmaker, Plus all your regular collision repair, where do you find time to do these rebuilds?

when you breath you remove a small percentage of the o2 oxygen from the air and add a small percentage of co2 carbon dioxide to it. but it's all still a mixed gas. you don't want to be breathing in CO carbon monoxide as it inhibits the bonding of O2 to the red blood cells which can kill you. cars produce both co and co2 in the combustion process. and catalytic converters are there to turn the co into co2 so they don't kill you. but in general the air you breathe is made up of mostly about 78% nitrogen and 21% oxygen. and lots of other trace gases like argon, hydrogen etc.

@dougdean3134

2 жыл бұрын

Yep that’s the chemistry of life!

@alias_not_needed

2 жыл бұрын

so if you wanted to kill yourself in your garage with a hose from the exhaust to the cabin, you should look for a car without a catalytic converter?

I’ve seen MM on a few videos, never realised he had so many war wounds. He’ll be better than brand new when he’s done. Holly will be delighted with him.

@MischiefMakerTV

2 жыл бұрын

This Summer will be a pretty rough wheeling season and I hope I can avoid any really bad body damage, but the obstacle gods are in control of that! 🙏🏻

@NANKEL1

2 жыл бұрын

@@MischiefMakerTV I'm not knocking you driving, but how about giving Lizzy a turn at wheeling it for you😂👌🇦🇺

@toddhoffmaster6057

2 жыл бұрын

@@NANKEL1 Lizzy & Jaymie have both driven MM.

@iffykidmn8170

2 жыл бұрын

@@NANKEL1 Lizzy had her go at MischiefMaker, we do not need any more.

@michaeld53

2 жыл бұрын

MM. isn’t a HE!! It’s a SHE!!

Nice job. Hillbilly’s favorite saying “If it’s free, it’s for me.” Mine too.

I am an old retired guy and a big fan of your channel. You all seem like really decent nice people and it actually looks like fun to work there. Also hot boss. 😁 I worked almost 40 years at a place where decent people were scarce. Cheers from the left edge of Canada. ~ulrich

The epic Layton-Slap intro did not disappoint. My life is complete. :)

LAYTON NATION, where viewers see, family, tech, and great humor. Thanks to all.

Awesome guys keep good care of Hollie's Jeep I know it's gonna look beautiful!

I just realized the reason I like these teardowns so much is that NOTHING IS RUSTED. If that Jeep was really from NY this would be a 72 hour video. Where I live, you mostly need a sawzall and acetylene torch to take parts off.

14:07 yeah that's why you don't put a LS in it! Because it's a Mopar so put a hellcat in it!

Hillbilly is awesome! 😂 Love that guy! 🍻

Got some scratches on there, can't be having that on a rock crawler 😆

@MischiefMakerTV

2 жыл бұрын

The scratches I don’t mind, but the doors gotta close. My friends advised me to just BFH the door sills and move on, but I just couldn’t get them where I antes them 😕

Another awesome episode. So excited watching mischief maker getting spruce up. And yeah, the mystery of 10 mm socket. God knows how many of them I’ve lost and no matter what I do it’s never easy looking for them when you need them. 🤣

@MischiefMakerTV

2 жыл бұрын

I totally blamed Walter! 😅 so glad it has been found

@rusty7699

2 жыл бұрын

10mms come and 10mms go. You have to figure that with how many you lose over a lifetime, finding one is just the universe balancing itself out in the long run! 😀🤣😂

@martykitson3442

2 жыл бұрын

That is until you reach for a 7/16 and can only find 10 mm's it'll change back as soon as you need a 10 again 😲

@mattfinch3281

2 жыл бұрын

I’ve actually never lost any 10mm. 😂🤷🏻‍♂️

@rusty7699

2 жыл бұрын

@@mattfinch3281 oh god, here we go...

You going to make her cry again! Thanks for sharing!

I love how Robby, Holly, Matt, Paul, Rory, and so many others I can't remember them all, collaborate to give us so much interesting entertainment !!!!!! I got started on this wonderful adventure when I came across the vid of Matt and Pual towing someone out of hog canyon. I grew up in Orderville but I don't know how or even if I'm related to Paul?

You guys are a breath of fresh air to watch. Not carbon monoxide which comes from internal combustion engines. And Carbon dioxide from your exhale. Neither are good for you. Thanks for quality videos that are family friendly. God bless.

Thanks for the video so early in the morning.. Getting a good vibe and education is always priceless to start with.. And you gotta calm down stud.. Robby Latin baby making.. Soon you will have a garage full of little people building power wheels and go-carts.. 😅

The hood lock is perfectly accessible in the grill, the metal grill is aftermarket and should have a hole for it, if not -that- is the thing thats the problem, not the faftory stuff. its a super common mod.

Can't wait to see your top-notch results on Mischief Maker!

Hey Hillbilly, Hey Dinner, Hey Robby, Good to see you working on MM. Hollie is missing him and we know you guys are taking real good care of him. I love the LS you put under the hood. :D that should add some real HP. Ya'll be good, be safe and God Bless.

so stoked to follow along the Mischief Maker overhaul. you guys rock! See Big Dinner and Robby got fresh cuts too! 7:56 having the bolt is sweet, one less added key and you can securely lock the hood. 11:13 straight up antibiotics growing LOL, don't eat that HillBilly! Arrghh too late LOL. 14:16 cause HillBilly knows one MischiefMakers trash is a Hillbilly's treasure! Keep up the great videos guys!

@MischiefMakerTV

2 жыл бұрын

😂🤣

@sandralutz-rodriguez2864

2 жыл бұрын

@@MischiefMakerTV under the seat lost treasures LOL

Another great video in the Layton hall of mischief and giggles 🤭

Can't wait to see the MISCHIEF MAKER done... You guys do great work...!!!! HILLBILLY,,, YEAH YOU HILLBILLY... what where you thinking eating that banana bread...???? Good thing you didn't take a bite of the green fuzzy part of the bread...!!!

@ThatandCo

2 жыл бұрын

penicillin in raw form he'll be immune to anything then ! LMAO

@MischiefMakerTV

2 жыл бұрын

That was a bit rough! He is a brave man, but at least he also got paid to stop eating it 🤣🤑

All Metal is the best! This channel is my favorite body shop channel! Your positive attitudes and work ethic are amazing.

@MischiefMakerTV

2 жыл бұрын

Having hung out with this crew for 2 days, I can definitely say the MORR and Layton Autobody crews are some of the hardest working people I’ve ever been around! 🥵

Robby, Hillbilly is a wise recycler. Keeping things from the landfill is almost always wise.

Amazing day of work…WOW! MM is in great hands!

Not my thing really as far as a Jeep goes, but absolutely respect that after all the previous money spent to customize this ride the owner still used it like a Jeep should be used. NO MALL CRAWLER here!

Mischief Maker looks so sweet that I never knew there was so much was damage!

Just a bunch of professional Mischief Makers 🤙🏽

It's going to be awesome Robbie! I told her she should let you customize her new welding helmet also. Great job so far guys! Looking forward to the finished jeep.

I just have to say that baby Lincoln is absolutely adorable. That is my favorite age for a baby, so cute. You did good.

WOW, the keyboard worries are at it again!! Mischief Maker, is Hollies brand and is more than just a very capable rock crawler and a show vehicle. So giving him some TLC, to keep him looking good for his fans is very important. For the video and photo opportunities. Robby, Big Dinner, Hillbilly and the rest crew behind the scenes. Keep up the amazing job you all do!!

I bet Hollie is really missing her ride. Good content and I enjoyed watching this episode.

@MischiefMakerTV

2 жыл бұрын

You have no idea. I don’t spend too many days without MM being within a few minutes drive of me. Can’t wait to get him back for EJS 😈

@ronnydowdy7432

2 жыл бұрын

@@MischiefMakerTV I have been in the same place as you are now so I do know that feeling. Hope to see you back in the MM soon.

1:15 .. I love it when Robby slaps everything on the Jeep! :)

The power of video, my 12 yrs in the auto body industry I could never strip a car in 15 min even with 2 helpers . Lol I hope people don’t think body work is as easy as y’all make it look .

Came to watch the Banana, stayed for all the body work education.

For the squeaky sounds, use heat shrink - Black , Blue or White for the large ring clamps . . . This will preserve the paint on the tanks and give a clean look. . . . Dinner knows what we are talking about ;-)

Dinner is such a bro. I love him.

I really like the narrated tear downs. Dinner’s the narration master! It’s a bloomin’ treasure hunt! Well maybe an LS wouldn’t need a diaper. Dioxide is what you exhale (I hope!), Hillbilly. Fun video!

Awesome work so far on that really nice blue jeep!! Remember keep up all the hard work!!!!!

Very cool!! Great watch!! Laughing over the LS under the hood 😂. If I had one, I’d like to gut the electronics junk and drop in a Golen 4.7 stroker I6 and MV4550 transmission and Atlas t’case

A few of those War Wounds should remain IMHO. Paint fender flares black would be a pleasing contrast. Paint all 10mm's RED.

Love the opening with the little mischief maker in the passenger seat of Mischief Maker!

Your videos are great! The editing is superb! I love the sound effects of Robbie palm slapping the panels. Mischief Maker must have cost a zillion $ to build, and it is beautiful! Cant wait for the reveal, REALLY can't wait for Ed's Suzuki to be done!

Now Holly can see everything all the time . No shortcuts on M. Maker . Thx for the vid. - Ken ...I have since learned that her name is spelled with an ie .

When I was a kid (last century), there was a used car salesman back when they did used car sales on TV in Houston. He would slap all the cars like Robby does. Really gets your attention.

Robby you and your team rock! Only thing I can ask is shield up and cover your eyes. You've got a real opportunity to lead in the area of safety to a wide and varied audience. 🤘

Really enjoy your videos, you and your crew are awesome!

Good teardown, he will be better for the experience. Looking forwards to seeing more of this rebuild.

Hillbilly you are the man! I have been called "Sig o' the dump" because I also hate to waste stuff other people call junk.

Came from following my favorite channel Matt’s off-road recovery. Now second favorite channel Robby Layton Nation!! Love u guys. Seriously!

Lol!!! I can’t get over the hand slapping. Keep at it brosef.

Right on Robby you da man

You guys are quick and good.

LOL Robby always slap! It pisses people off. 🤣😂

Good job guys, thanks for sharing Robby! 👌🏻🤙🏻🤙🏻🇺🇸

Matt's got Ed ,you've got Mr Dinner what a combo !

Love this!! CO2 (dioxide) is what you exhale. CO (monoxide) is deadly. It binds to your red blood cells stronger than oxygen does so you basically suffocate while still breathing. I was a paramedic and had some tragic calls for entire families who died because of CO poisoning from improperly installed/blocked furnaces and wood stoves.

Great video,thank you.

Bite of the bread, robby gags...hilarious.

What a different rig with all the extras pulled off

100% agreement on the 10mm being the one size that you will loose, be it wrench or socket. When I use to be a boat mechanic I got sick of losing them so I bought a 100 of them from Harbor frieght ( mostly the standard depth socket ) I think 80 standard 20 deep. With in 2 years my basket was empty.

Great job. Love that Jeep…

Oooh, there's some work to be done there Good thing Mischief Maker is with Doctor Layton. That Jeep will be better than new and ready to get all new dents

Man, I wish you guys were closer, I'd def have you repaint my pride and joy, 94 Firebird. Yall are great!

Nice learning alot ...........and great ideas

Hey Robby //Dinner & Hillbilly !!! WOW !! You guys work just like ""CLYDE"" On ""Ever Witch Way But Loose "" !! HAHA Great dismantle of ""Mischief "" !! NOW

Dinner I love to watch you work.....always telling us what you are doing......Dinner way to go

What an awesome tear down video!

Big Din, is hilarious, cheers!

You guys are really awesome. That's a ton of work to do in such a short time. Most body shops would take a LOT LONGER to do the same job!!

Good show ! 👍

Thanks for the awesome content

Man, I love slappy time!

I will contribute to the LS swap Mischief Maker fund! Nice work fellas. HOLY CRAP YOU ARE REALLY DOING IT!

YES PLEASE GREASE MischiefMaker

Awesome !

Dinner!!!!! Awesome buddy you make everything better!!! I so enjoy watching y’all!!!! Awesome work!!!!!

I don’t think you guys are busy enough. We need a demolition derby with. Matt’s off-road recovery. Fab rats. Robby Layton. Mischief Maker and anyone else who wants in.

You go Robby!

Hood locks are nice to have. I got one for my LJ just to be on the safe side.

The original paint job was pretty well done. All those caps were painted off the vehicle and a lot was painted on the back too. Gotta appreciate that.

Love it fellas!

Great job on this video I enjoyed it very much. I enjoy the duck part also

Love Robby’s gang!

I rented a Mini Trac and I found a 10mm deep socket sitting on the side of the seat felt like I won the lottery!

I had no idea that Jeep needed that much work ! Another Great Video !

had the video running on the family room projection screen, Michelle stop in her tracks, "Who is that " (-: Lincoln is adorable

Talking about missing 10mm sockets always reminds me of how young you whippersnappers are. When I was wrenching in the back yard, it was the 7/16" and 1/2" that was always missing or buggered up. :-D

Going to fun following this build

Wow... and from a distance Mischief Maker looked pretty good before... but up close it sure shows the wear and tear