you guys make the best how-to videos! i just installed this on my new bike (i've only had it for 2 days) and it came out perfectly. i really appreciate how meticulous you are with the installations... i'm the same way. i'll be following your Akrapovic slip-on exhaust how-to video when my exhaust arrives later this week. good stuff, thanks STG!

@sportbiketrackgear

5 жыл бұрын

Happy to hear this helped you get the install done. Enjoy the Ninja 400, it is a ton of fun to ride for sure. - Van

dude you are a genius with this lighter! I would never think of anything like that. I'm from Brazil and I always watch your videos with the ninja 400, I have one and I'm installing the accessories little by little and your videos help a lot!

@sportbiketrackgear

4 жыл бұрын

Happy to help out! - Van

Doing the install today, looks very simple. Thanks for the install vid. In my opinion, this is the best fender eliminator kit in the market for this bike.

@sportbiketrackgear

5 жыл бұрын

You are welcome and thank you for watching! - Van

@CandidoMendez

5 жыл бұрын

@@sportbiketrackgear Installed the fender eliminator kit and the alpha t slip on. Man this bike sounds and looks amazing! Thanks for all of your help!

Even 4 years later this is still the best video I've found on installing this, seeing exactly how you disconnected cables and the little comments while installing on what you're doing make all the difference. Thank you very much, my install went super smooth.

@sportbiketrackgear

10 ай бұрын

You are welcome and I am happy to hear this was helpful. - Van

Got this in a few days ago from STG. I watched this video 2x and got this done in 15 minutes. It's so easy to install and cleans up the rear end really nice. Thanks Brian for the video and to STG for all the amazing service. Next up, a Yoshimura Full Exhaust.

@sportbiketrackgear

4 жыл бұрын

You are welcome and thank you for the business! Enjoy that 400. - Van

Just now figured out you guys are located in Michigan. I'm 20 & just bought a 2019 Ninja 400 for my first street bike. Learning a lot of things by watching this channel. When i get my endorsement and insurance on it in spring ill see about taking a trip from Brownstown up there to check things out. Seems like you guys are honest people with a passion for this stuff other than a bunch of salesmen trying to make a quick buck. Thanks for the tutorials and the tips. Keep up the good work!

@sportbiketrackgear

4 жыл бұрын

We look forward to meeting you when you come out. If you want to see Max's Ninja race bike when you stop in just let the staff know. If I am here they can bring you down to my shop where the bikes are. - Van

Great video! I’ll be installing my Yosh fender eliminator as soon as it arrives. Thanks for the how-to!

@sportbiketrackgear

3 жыл бұрын

You are welcome and enjoy your 400! - Van

Great install video I never had to touch the instructions from Yoshimura ...Only thing i effed up was the connector i melted one..Had to go the old electric tape method....Thanks for the awesome instructional

@sportbiketrackgear

4 жыл бұрын

You are welcome, happy to hear it was helpful. - Van

Thank you so much! Just used this vid to install the kit on my 2021 Z400 and it looks amazing!

@sportbiketrackgear

2 жыл бұрын

You are welcome and thanks for watching! - Van

Great video tutorial, I was able to follow you’re step an had great success on installing these fender eliminators.

@sportbiketrackgear

2 жыл бұрын

Happy to hear it was helpful and thank you for watching! - Van

Thanks for the video. You do work the same way I do; no rushing, do it right, and clean it up. Appreciate it!

@sportbiketrackgear

2 жыл бұрын

You are welcome and thank you for watching! - Van

Thanks STG!

Great content as always!

@sportbiketrackgear

4 жыл бұрын

Thank you for watching! - Van

Installed m4 full exhaust system on my ninja and fender eliminator. These guys are great

@sportbiketrackgear

3 жыл бұрын

Appreciate your business! - Van

Awesome video. Helped me out alot

@sportbiketrackgear

3 жыл бұрын

Happy to hear it was helpful and thanks for watching! - Van

Brian Van always a champ; a man among men

@sportbiketrackgear

4 жыл бұрын

Appreciate the kind words. - Van

I’m afraid Vagabond is the way to go if you’re keeping your stock lights. One solid piece , very comprehensive install videos 👍

@sportbiketrackgear

5 жыл бұрын

Zero personal experience with that brand. Took a quick look at it, very simple design that needs the OEM rear signals and plate light to be installed. The Yosh eliminator ships with an LED plate light, includes a plate frame and offers the ability to run aftermarket LED signals (optional brackets required). End of the day depends on what you prefer on your bike. I have installed 4 fender eliminators on the Ninja 400 now, each one offers a different look and features. - Van

@elithegreat6463

5 жыл бұрын

Sportbike Track Gear Absolutely, it’s all about preference. Great job with your Ninja 400 vids 👍. Perhaps a new Project bike to look at would be that New Honda CB300R..Yes it’s only a 300, But one of the best looking little bikes out there, makes a great beginner & or 2nd bike that’s inexpensive.

@sportbiketrackgear

5 жыл бұрын

Thanks for the kind words and for watching! For 2019 we will finish up the Ninja 400, the GSXR 1000 and the R3. (Still have a Grom and a Z125 to finish) Man I need a couple extra days in the week! I will have to check out the new Honda. - Van

Hey you got a fan down in Brazil!!

@sportbiketrackgear

4 жыл бұрын

Thanks for watching and take care! - Van

Awesome video...thanks for making it so easy to do at home. I'm looking at getting a Ninja 400 and wanted to install this after getting the bike. I'm definitely not a track guy and was planning on a back roads/sport touring style riding with the Ninja. I was looking at the Zero Gravity sport touring windscreen and wondered if you had any experience with it? Also, since this eliminates a lot of the fender/mudguard, would you recommend something like a Puig fender extension, for my intended riding style? Thanks in advance for any advice you can provide!

@sportbiketrackgear

3 жыл бұрын

The ZG windscreen will get some wind protection for sure. Personally I do not think you will need the fender extension if you leave the rear fender on the bike. - Van

I just did mine the only thing i can add is if you reverse the bracketts for the lights left to right you can hide the hardware and it kicks the lights out a little more

@sportbiketrackgear

3 жыл бұрын

Thanks for watching. - Van

I got this Yoshimura fender eliminator and the turn signal relay failed after 2 weeks. After another 2 weeks of phone calls, I FINALLY got a replacement relay from Yoshi. The turn signals aren't super bright either. If I had do it over again, I'd get a different kit.

@sportbiketrackgear

5 жыл бұрын

Did you reuse the stock rear turn signals or install a set of aftermarket signals? If you reused the stock signals installing this fender eliminator would not have any affect on the turn signal flasher. - Van

@fl0sserelli

5 жыл бұрын

I did not reuse the stock turn signals. I used Yoshimura's LED turn signal kit designed for this bike.

A fan here in Kenya

@sportbiketrackgear

4 жыл бұрын

Appreciate you! - Van

come on Yoshimura plug and play is the way none of this needing to make people rewire

@Stinbeng

3 жыл бұрын

@Gerald Forest wtf

@Stinbeng

3 жыл бұрын

@Aldo Critchfield wtf

I recently installed a fender eliminator kit on the 17 r6 and the check engine light has been on for a few days. Do you know what could’ve gone wrong?

@sportbiketrackgear

5 жыл бұрын

If you have a check engine light on the R6 after installing a fender elim kit the only thing that comes to mind would be leaving the exhaust servo motor being unplugged (this is assuming you unplugged it for some reason during the install). Could be a coincidence. - Van

Sir, Isn't that Michelin tyres? Or Pirelli?

Van what is the best fender eliminator for the ninja 400? That STG sells obviously...

@sportbiketrackgear

5 жыл бұрын

The Yosh and Driven are both more traditional with turn signal stalks. The New Rage and Hotbodies are much sleeker with integrated turn signals. Personally I really like the look of the New Rage kit. www.sportbiketrackgear.com/new-rage-cycles-kawasaki-ninja-400-2018-fender-eliminator/ - Van

Do you have to shorten the wires? Can't you just leave them stock length and bundle them up like you did that one long one at the end?

@sportbiketrackgear

3 жыл бұрын

You can leave the stock length and hide them in the tail if you like. - Van

What tools do we need for this that don't come with the fender kit?

@sportbiketrackgear

5 жыл бұрын

No tools come with the fender kit. That said you will need a couple of t handles (best to buy a set that spans from 3mm to 10mm), along with a few other basic hand tools. If you plan to work on your own bike I would pick up a nice metric tool kit from Home Depot etc... - Van

is that a yoshimura exaust? Edit: Found out it was Leo Vince. great video btw!

@sportbiketrackgear

4 жыл бұрын

One of the best selling kits for the Ninja 400 we offer. - Van

@sanderlofthus3220

4 жыл бұрын

Sportbike Track Gear yeah, looks great and sounds great, thanks for the reply!

Do you know if this would fit a European motorcycle plate?

@sportbiketrackgear

5 жыл бұрын

It is designed to fit US plates. If the dimensions of your plate are different it will not fit. - Van

Feel like the keni moto one is just as good and its like a third of the price. 1. slots for the oem turn sigs 2. You reuse the tag light, 3. No cheesy branding is visible. 4. Tucked up close under the tail just like this one. 🤷 I will spend money on quality performance parts, but spending over $100 for a fender elimnator is WILD.

@sportbiketrackgear

10 ай бұрын

Never heard of that brand. As I rule I do not install or recommend any of the Amazon/eBay brand accessories on any of our bikes. - Van

@moremiatas

10 ай бұрын

@sportbiketrackgear never heard of em until recently either and I'm saying for the price the quality is right there with the $100+ options.

Possible simpleton question as I am brand new to riding, but you are disconnecting the battery before doing any wire work/removal, and then obviously reconnecting to test everything after correct?

@sportbiketrackgear

2 жыл бұрын

You do not need to disconnect the battery for this fender eliminator kit install. There is no power to these lights with the key off. - Van

@DustedTurtle054

2 жыл бұрын

@@sportbiketrackgear Thank you very much sir. Looking forward to my next visit to the store!

My hinge pins are put in backwards on my ‘23 so I can’t remove the trunk panel🤦🏼‍♂️ just a tighter workspace

@sportbiketrackgear

Жыл бұрын

They must have made a small change from 18 to 23. - Van

My light didn't work. I've installed one before and that worked fine.

@sportbiketrackgear

2 жыл бұрын

Double check your work to make sure this is not a bad connection. We do not really see any bad bulbs with these kits. - Van

At the end of the day, I don't like the the fact that the turn signal brackets are a part of the plate assembly mounting. One hit to the plate and you have more than just a bent plate.

@sportbiketrackgear

4 жыл бұрын

Check out the New Rage Cycles fender elim for the Ninja 400. Here is a link to it on our site: www.sportbiketrackgear.com/new-rage-cycles-kawasaki-ninja-400-2018-fender-eliminator/

What wire cutters are u using? Also do I need to install the license plate light?

@sportbiketrackgear

2 жыл бұрын

I am using side cutters you could find at any hardware store. - Van

Where can I get those clear tubes & micro torch that you used?

@sportbiketrackgear

2 жыл бұрын

I picked up the torch and solder tubes at a local hardware store. - Van

Where can I get the blue glue.

@sportbiketrackgear

2 жыл бұрын

You can get thread locker at any hardware store. We also offer it on our site. Here is a link: www.sportbiketrackgear.com/motorcycle-oil-and-chemicals/threadlocker/ - Van

@Kingnabor

2 жыл бұрын

@@sportbiketrackgear awesome Ty.

What about the reflectors on the OEM rear fender? Many jurisdictions require them and it is illegal to not have them is equipped. You would think someone would have come up with a plate light connector to avoid splicing wires. $130?! Are you nuts? There's about $10 in material cost. I'll give them $10 for overhead, $10 for advertising and your up to $30. Throw in a $20 spot for "gee-wiz profit" and its up to $50. Over priced. Being new to "the bike scene" it sure seems like all the companies are out to gouge customers out of their hard earned cash. So sad.

@sportbiketrackgear

4 жыл бұрын

There is not as much profit in this as you might think. Yoshimura manufactures these here in the US which adds some cost. I can assure you no one in this industry is getting rich. - Van

If only he could make Ikea videos too

@sportbiketrackgear

3 жыл бұрын

LOL never gonna happen! - Van