This isn't a list of mods- this is art! Well done brother.

@JJackMoto

4 жыл бұрын

Thank you!! It really is such a cool bike to mod. Thanks for watching!

WHAT A BEAUTIFUL MACHINE

@JJackMoto

5 жыл бұрын

Mario Dominguez Thank you!

just here to complement the white lettering on the tires, one of the things that got my eye from the first time I laid eyes on the bike on Instagram, it stands out so nicely with all the black around it. Great work!

@JJackMoto

4 жыл бұрын

Thank you!! Wasn't too sure about it at first, but I think it's a really cool look. Thanks for watching!

Just picked mine up today!

That’s a nice XSR700 you got there. I have one myself and went a different route with the mods and I think it came out really nice also.

@JJackMoto

5 жыл бұрын

That's the great thing about these bikes, you can go a million different directions. Thanks for watching!

Best XSR700 I’ve ever seen. Greetings from Turkey.

@JJackMoto

5 жыл бұрын

Theoderic Wow! Thanks! Keep an eye out for more vids. Should have some time to do more in the next few weeks.

@Theoderic

5 жыл бұрын

@@JJackMoto I will wait! It would be great to take a little ride with this motorcycle.

Hey man Im in TN as well - Im really looking into getting this bike. Thanks for the info.

Those turn signals are WAY better than the OEM floppy alien eyes. I like the replacement headlight from brough motorcycle. It’s about 1/4 the thickness and LED. I think it’s like $200 for the whole thing. Nice looking bike!

Love it ! Great Mods. Im thinking about switching from my 15 Fz07 to this one in silver .

@JJackMoto

5 жыл бұрын

Danny Crash thanks man!! That FZ is a great bike as well. Go for it! The silver is a great color on this bike for sure. Thanks for watching!!

Man I'd recommend cable ties to your loose wires around the handle bars, It just cleans it up so much.

That fender elimination is fucking flawless.

Back over here (UK) we wouldn’t get away with a number plate tucked under there. As for mods, I spent my hard earned on upgrading my suspension, fully adjustable K-Tech front a rear, it transformed the bike to a new level of handling. Still got mine 4 years on 💪😎

@leeinwis

2 ай бұрын

You wouldn't here either , he probably got a fine by now.

素敵なマシンですね オーナーさんのセンスが光る素晴らしいカスタムだと思いました 純正のヘッドライトを残したままバランスの取れたXSRを拝見したのは初めてです！素敵な動画をありがとうございました

@JJackMoto

4 жыл бұрын

優しい言葉をありがとう！

Gorgeous I can’t wait to buy myself one

@JJackMoto

3 жыл бұрын

Thank you, and thanks for watching!

Well done man!

@JJackMoto

4 жыл бұрын

Into The Mystery ⓭ Thank you sir!!

Damn i love that tail kit

Awesome bike ! Greetings from France !

@JJackMoto

5 жыл бұрын

Merci Beaucoup!! Greetings to you as well!

That xsr700 looks clean...I'm thinking about doing some upgrades on it like yours. 👍

@JJackMoto

5 жыл бұрын

Thanks! Modding options is what makes this bike so awesome.

Absolutely gorgeous!

@JJackMoto

Жыл бұрын

I appreciate that! It was a great little bike, had a blast with the design. Thanks for watching!

Dam ... perfection dude!

@JJackMoto

4 жыл бұрын

Bou Lisa Thank you!! It’s been such a fun bike to customize.

I think you forgot to mention that you took of the passenger foot pedals. I think it‘s a great mod since it makes the rear/subframe look so open and clean.

I just got the same bike yesterday!! Super excited. I want to paint (or wrap) the fender black. So curious as to what kind of pain you used to paint some of the pieces.

I still have her, Man…She’s at about 14,000 miles now and is as awesome as ever.

@leeinwis

2 ай бұрын

Who tf are you ?

@enyskept

2 ай бұрын

@@leeinwis I am Barnaby Wilcox.

This is exactly how I want mine to look

Would you be able to do a more in depth video on the handle bar situation? I just bought the same bars from your link. I’d like to get some bar end mirrors too, but I’m having a hard time figuring out what will fit with those bars. Thanks!

Hey do those bar end mirrors just bolt straight in or do I need to purchase adapters as well?

Mint bike bro just ordered my 2023 model just wonder if you used a speedo relocator for this build?

Hey nice bike!!! I’m interested in buying the Fender Eliminator - New Rage Cycles (Tucked) but I have to ship them to Italy and on the local(Italian) Amazon I can’t find them what should I do?

When are you going to make more videos. Got my xsr700 2020 today. Looks great man Via Alabama

@JJackMoto

Жыл бұрын

Congrats on the bike, you’ll love it. I sold mine a year and a half ago, so no vids any time soon ha. Enjoy the XSR and ride safe!

What clamps did you use for the handlebars or did the original fit? Nice mods! 🤙

😍😍

Very nice bike. I have the Forest Green model and I'm thinking on doing some of the things you did (removing passenger pegs, LED bulbs for headlamp and indicators) Which LED bulbs did you go for? The H4 fanless with 4,000 lumens? If so, are the internal drivers necessary? Thanks!

@JJackMoto

5 жыл бұрын

Mariano Thanks for watching, and thanks for the compliment! It’s been a blast making this bike my own. It think the link in the description will take you to the bulb, if not, the model number is H4-HLV4-M: Cool White. I already had the led relay installed when I switched to led signals, so no issues there. Thanks again!

That tail looks awesome! Thinkin about placing an order for that same taillight kit for my XSR! Is their a light for the licenseplate?

@JJackMoto

5 жыл бұрын

Thanks! There is. It’s very good quality as well.

Love the bike!! I dont want to be a copy cat but your xsr is sick, if I get one I'm doing a similar look sorry! I had a 2015 fz09 loved it sold it to keep me out if trouble but now I'm looking to ride again, I'm so torn between getting a xsr700 or 900. I also see your in Tennessee, I'm north of nashvile.

@JJackMoto

4 жыл бұрын

Thanks for checking out the channel! It's such an awesome bike. No worries AT ALL if you take some inspiration from what I've done, I consider it a compliment! They're both awesome bikes, and as you know, that CP3 is such a great motor. I highly recommend giving them back to back test rides if you can, just to nail it down. Yeah man, born and raised in the area. Such underrated roads around here.

@anthonysam2652

4 жыл бұрын

@@JJackMoto theres a yamaha demo days in Birmingham al in OCT I'm going to try to make it to test them out. Do you use an app for finding roads here in TN?

@JJackMoto

4 жыл бұрын

@@anthonysam2652 Oh that's right! Is that the event at Barber on October 4-6th? I honestly just look on Google maps for interesting routes, give them a try. I'm in the Montgomery County area now. So many awesome roads up here.

I really like the front blinker unpgrades. You mention needing a connector? Can you specify or supply link? Please and thank you!

@JJackMoto

3 жыл бұрын

Happy to help! This is all you need... tstindustries.com/tst-yamaha-signal-plug-converters-3-to-3.html tstindustries.com/tst-led-flasher-relay-gen2.html

Hey @jjackmoto, is there an instruction guide for the nrc fender kit? Mine arrived but has no instructions, cant find a video on it either.

@JJackMoto

4 жыл бұрын

Chris Skinner Hello Chris! This link should take you right to the instructions. Super easy install. Let me know if you have any questions. Thanks for watching! www.newragecycles.com/v/vspfiles/assets/images/instructions/Yamaha%20XSR%20700%20Fender%20Eliminator.pdf

Hi and thanks for the video. A clarification for the Flush mount front turn signals. Did you need to additionally buy the "TST YAMAHA SIGNAL PLUG CONVERTERS 3-TO-3" located here? tstindustries.com/tst-yamaha-signal-plug-converters-3-to-3.html. This is to make the whole installation plug-and-play? Thanks.

did you cut handlebar...or u leave it like it is?

Good luck bike! Just picked up the tucked New Rage LED Fender Eliminator kit. Cannot wait to install. Do have a question on where exactly you place the rear paddock stand on the swing arm? Thank you!

@JJackMoto

2 жыл бұрын

Nice! You'll love it. With this paddock stand, the little pads go right in front of the rear axle. Thanks for watching!

Nice bike I have. 2016 xsr700. I bought those $10 mirrors on amazon that you posted but how do you install them with that plastic rubber fitting

@JJackMoto

4 жыл бұрын

Ivan Sama Keep in mind the bars I have are ProTaper Contour, so they will have a wider diameter at the end. The factory bars may need some drilling out to fit.

Is it easy to see behind with the reversed mirrors? Or do you have to move your hands, or head? I've never had mirrors reversed that's why I'm asking.

@JJackMoto

4 жыл бұрын

Aristos Vasiliou Hello! Honestly, with these lower bars, my view is absolutely unobstructed. The line of sight goes right under my arm down the bike. Take a look at my Rizoma vs. knockoff mirror ride review yo get a better idea. Thanks for watching!!

Hey quick question about the handlebars. Did you have to drill any holes for the installation?

@JJackMoto

5 жыл бұрын

Nope, not at all. I guess you could if you wanted to in order to accommodate the little tabs that hold the throttle cable and signal/light boxes in place, but I just sanded those off and ran one loop of duct tape around the bar to help with grip. Worked like a charm.

does the handlebar hits the fuel tank?

were you able to retain your factory bar end weights with the Renthal bars and those Amazon mirrors? Really considering this as a 2nd bike, coming from a 250cc

@JJackMoto

4 жыл бұрын

Hello Alex. I was not able to keep the bar-ends with the Pro-Taper bars, but I'm sure there are some aftermarket options that would fit.

What rear stand is that? Wanting to get one for my XSR.

@JJackMoto

3 жыл бұрын

I can’t remember where I got that. I think it was just a cycle gear store brand. It was the swing arm setup, not bobbins.

Does the radiator guard has any negative impact on the cooling of the engine?

@JJackMoto

4 жыл бұрын

Hello Sir! Not at all. It is a high quality mesh build, so no air restriction whatsoever.

Looks great, how bright is that tail light at night, does it look nice?

@JJackMoto

5 жыл бұрын

Thanks! It looks awesome at night. Run/Brake/turn signals are all very bright. I'll try to make a night ride video to show the tail, as well as the LED headlight.

Is the license plate bracket apart of the NRC fender eliminator kit? Do you think it would be possible to install a custom bracket there?

@JJackMoto

4 жыл бұрын

The bracket is part of the kit, but I would imagine you could fabricate something simple instead of the supplied setup.

Did you have to do any drilling with the handlebars? Currently looking at purchasing new ones and wanted to go with these but wasn’t sure if drilling was required

@JJackMoto

4 жыл бұрын

Thanks for watching! No drilling or modding at all. The small nubs that hold the throttle box and brake master cylinder box onto the bars can be snipped off so that they fit flush. Some people will drill small holes to accommodate those, but not necessary.

how is the new rage cycles led strip treating ya? Is it still working?

@JJackMoto

2 жыл бұрын

I sold the bike back in 2019, but it was a great product. It wasn't really a strip, but an actual framed light. www.newragecycles.com/Yamaha_XSR_700_Fender_Eliminator_Kit_p/xsr700-fe.htm

Hey Jack, was the handlebar a staight fit install? I read somewhere that the controls have some notches to fit in some holes in the stock bar. Thanks!

@JJackMoto

4 жыл бұрын

Hello! That is correct. The stock controls have small nubs that fit into holes on the factory bars. I just clipped off the nubs, never had a problem. You can run a small strip of duct tape under the controls for more grip, but not necessary. Thanks for watching!

Hey man, loved the video. Hope you get more more views and subs from it! Easy sub from me and fingers crossed you'll make more videos of the bike in the future! I really like the look you've gone for, even though it's a bit different from what I'd choose myself :) Makes such a difference that rad guard and the meshy thing you blacked out. And the New Rage fender looks great (wish we could get away with the plate tucked under here in Scandinavia). Are you happy with the brake light? Just a bit sceptical if it is big/strong enough. Ride safe!

@JJackMoto

5 жыл бұрын

So sorry for the late reply! Thanks for the compliments. I am really happy with the light so far. It is plenty bright during day and night. Thanks for watching!

Just got the carmichael bars. any mods you had to make or was it a pretty straight forward swap? thx

@JJackMoto

4 жыл бұрын

StreetRodAZ Awesome! Very straightforward install. The only thing you might need to do is to snip off the little nubs that hold the throttle cable box together, as well as the and ignition switch box. You’ll see what I mean. Just trim those off and you’re good to go.

@StreetRodAZ

4 жыл бұрын

@@JJackMoto Awesome. Thx brother.

Did you buy the resistor for the LED headlight bulb? Or was it just the bulb that was plug and play?

@JJackMoto

5 жыл бұрын

The Veneman I believe this bulb has a built in resistor. I already had a relay installed for my signals though.

@SamVeneman

5 жыл бұрын

@@JJackMoto gotcha. Thanks for your super quick response!

What rear stand is that? I just got an XSR and I am hoping to get a stand for it. Also, is there any additional thing I need to get the stand to work with the bike?

@JJackMoto

2 жыл бұрын

This is the stand I had. Nothing really additional, just make sure the pads are as close to the rear hub as possible. www.cyclegear.com/accessories/trackside-rear-paddock-stand?sku_id=1127303

@ChaseLancaster

2 жыл бұрын

@@JJackMoto thank you!

What rear spools did you get?

@JJackMoto

5 жыл бұрын

Actually, no spools installed. I just use the swingarm blocks on the lift.

Hey bud did you get a tune after the exhaust? If so was it a dyno tune or a ECU flash?

@JJackMoto

4 жыл бұрын

Hello Greg, sorry for the late reply. I actually just use a ECU modifier called Booster Plug. Check out my install vid on that piece. Thanks for watching!

Sweet bike man! how did you spray paint the side silver grill. Did you take the fairing off or just duct taped around it? Also do you have a light for the license plate?

@JJackMoto

3 жыл бұрын

Thank you! Yes, I just took that small panel off, taped off the outside, sprayed the grill. The plate kit does come with a light. Can't see it very well during the day, but it's there.

@johnumarov3770

3 жыл бұрын

@@JJackMoto I think I will paint it the same! Mine is the same spec as yours. The previous owner already installed the exact tail tidy like yours, but he didnt install the LP light (mine is tucked in like yours too). Now I am researching around how to fix it and avoid the cops! haha

With the Carmichale bars did you have to get new bar clamps? Revzilla site says "Requires use of 1-1/8" bar clamp, not compatible with standard 7/8" clamps." and I'm a bit concerned.

@JJackMoto

5 жыл бұрын

Hello and thanks for watching! No mods needed, direct bolt on. Make sure you get the Pro Taper Contour, not the Seven Eighths (SE). These are the ones I ordered. www.revzilla.com/motorcycle/pro-taper-contour-handlebars-1-18

@RamboRob

4 жыл бұрын

@@JJackMoto which type did you get? There are like 30 types lol. How do they feel compared to stock, comfort, more aggressive ride, better turn in handling?

@JJackMoto

4 жыл бұрын

@Rob Zilla I have the Carmichael bend. They are one of the lower bend options, if not the lowest. The ride is definitely more aggressive, but not uncomfortable. The handling is superb. The width really let’s you flick this thing around. One of my favorite mods by far!

@RamboRob

4 жыл бұрын

@@JJackMoto sweet, thanks!

How do the stock mirrors come off?

@JJackMoto

4 жыл бұрын

Incredibly easy. They just unscrew form the factory threads. Thanks for watching!

Hi JJack, can you tell me what make/model of paddock stand you're using please and also confirm that you're not using bobbins? Many thanks.

@JJackMoto

3 жыл бұрын

Hello Pete. The stand is just a Cycle Gear store brand stand, works really well. No bobbins, it’s a swing arm type stand. Thanks for watching!

@petemcnulty2437

3 жыл бұрын

@@JJackMoto thanks for the prompt response :)

Anyone know approx 0-60 time for xsr700? Having trouble finding info.

@thaimmigrant

4 жыл бұрын

around 3,3 sec

Does anyone’s bike in here have a tick at the motor? Gets loud as it gets warmer.

@JJackMoto

5 жыл бұрын

These motors are quite noisy in general, so a bit of a tick is totally normal. If it gets to where it sounds irregular you may want to check it out. My exhaust masks most of those noises.

you should change the tires next. The bike feels much better with road attack 3 or something similar.

@JJackMoto

4 жыл бұрын

Slow Mo That’s the plan for next Spring!

She's a beauty. Looking at one online. I'm 6'2". Will I be cramped?

@Chris.E.

3 ай бұрын

Literally just you say "I'm 6'2"". Disregard my last question lol

which levers are these?

@JJackMoto

4 жыл бұрын

Honestly not sure of the brand name. I wanna say PSR. They were in my local shop, picked them up the day I got the bike, they've been awesome.

Any problems since you've removed the front fender?

@JJackMoto

5 жыл бұрын

The Veneman Not at all. I took it off almost immediately after purchasing. I have right around 3k on the bike. I do recommend the radiator guard just in case.

@SamVeneman

5 жыл бұрын

J Jack yeah I’ve got the evotech one installed

@RamboRob

4 жыл бұрын

You can also get an mt07 fender for about 25 bucks from partzilla.com

Super slick. Did you cut off any width from the pro taper bar?

@JJackMoto

4 жыл бұрын

Thank you! No cutting at all. The width is one of the main selling points for the ProTaper in my opinion. Thanks for watching!

@chowmeinpapi

4 жыл бұрын

JJackMoto awesome. My bar just arrived. Going to install this weekend hopefully. Btw, what type of paint would you recommend for the radiator side guards?

@JJackMoto

4 жыл бұрын

chowmeinpapi that’s awesome. You’ll love these bars. My go-to paint is Rustoleum spray in gloss black.

@chowmeinpapi

4 жыл бұрын

JJackMoto appreciate the tips! And excuse the 21 questions. But did you notice increased vibration after mounting the pro taper bar and removing the bar ends? I have similar amazon mirrors but circular. I’m noticing much more vibration with the new bar. And i can’t find any heavy bar ends that would fit the 13mm inner diameter. Our stock ones weighed about 5.3oz each.

@chowmeinpapi

4 жыл бұрын

JJackMoto but I’m digging the new bar nonetheless!

Put thread lock on the bar end bolts

Did you get the fuse amp that's suggested with the headlight? Looking at getting the same bulb for mine

@JJackMoto

4 жыл бұрын

I already had the Flasher relay installed for my turn signals from TST Industries. No additional mod needed. I actually recently changed my light completely to the Koso naked option from Brogue. Check that vid out if you get a minute.

@chrisskinner636

4 жыл бұрын

@@JJackMoto ok just saw that video, looks great! Where did you hide the relay on your bike?

@JJackMoto

4 жыл бұрын

@@chrisskinner636 No need to hide anything. The flasher relay replaces the factory relay found under the forward cover on the clutch side of the bike. Takes about 10 minutes.

@chrisskinner636

4 жыл бұрын

@@JJackMoto well now I might sound stupid but forward cover? Not sure what that is

@JJackMoto

4 жыл бұрын

Chris Skinner No worries! The small cover that hides a bit of electronics, including the relay. It’s right under the gas tank, under the Yamaha label on the clutch side. You’ll see a small set of cooling fins poking through. I think it’s 3 or 4 screws that hold it on.

Which bar end mirrors do you recommend?

@JJackMoto

5 жыл бұрын

Tal Bar Honestly, I use the Rizoma knock offs from Amazon. I believe they’re around $35, brand is kemimoto. Rizomas are around $95. Keep in mind I have them mounted on Pro Taper Contour bard which have a wider inside diameter.

@SuperTalBar23

5 жыл бұрын

@@JJackMoto Thank you! will check them out, which Pro Taper Contour type do you have? I see there are lot of bend types to choose. your bike looks awesome by the way.

@JJackMoto

5 жыл бұрын

@@SuperTalBar23 Thanks! It's been a blast. I went with the Carmichael low bend. I believe it's among the lower of the ProTaper bars.

Can you send me handle bar size please

@JJackMoto

3 жыл бұрын

Carmichael Bend www.protaper.com/product/32/contour-handlebars/black

Does this still have got torque. Compared to the 900?

@JJackMoto

5 жыл бұрын

It's definitely a little torque monster, right at 50 lb-ft at 6500 rpm, whereas the 900 is right around 65 lb-ft at 8500. They both have plenty of power for me. Thanks for watching!

@phil8249

5 жыл бұрын

@@JJackMoto thanks for the reply. I test drove both today. Went with the 700. For me it's the better bike. The 900 would not calm down till 5th gear. I'm thinking of ordering those mirrors. Can you see pretty good with them?

@JJackMoto

5 жыл бұрын

Phily Great choice! The 900 is incredibly touchy almost the entire power band. I love this bike, and you really can’t beat the sound of that crossplain twin. With the low bars, I can see much better. Once you get used to them being lower, it’s hard to go back. Check out my drive by vid if you haven’t already. Thanks again!

@JJackMoto

5 жыл бұрын

Phily Keep in mind, these mirrors fit the inside diameter of these pro taper dirt bars, but I think you may need to alter the inside of the stock bars for them to fit.

Aww dude you've sold the bike, I only just found your channel as well - and to make things worse it seems two brothers have extended the mid pipe for that exhaust so now it pokes further out rather than nice n snug like yours was (going by what iv'e seen in other installs) bit of a deal breaker for me - Nice car though, will keep an eye out see what you do with it!!

@JJackMoto

4 жыл бұрын

Really?! Yeah, the current setup is pretty perfect for this bike.

@flopper8

4 жыл бұрын

@@JJackMoto It might actually just be the dimensions of the carbon can compared to yours but I'm not sure yet.

Mt07 front fender is about 25 bucks on partzilla.

@JJackMoto

4 жыл бұрын

Rob Zilla Awesome! I’ll give it a look 👍

Only thing I don't like on mine is the big ugly headlight (like most owners) & the side panels. The jvb panels are nice, tie the tank & seat area together, but silly money... so I can live with it as it is. Great bikes though 🤗

@JJackMoto

4 жыл бұрын

Totally agree! I did bite the bullet on a Brogue headlight. Check out the install vid on that. Thanks for watching!

@ianblack7934

4 жыл бұрын

@@JJackMoto I like it, much neater 🤗 Will see if they're available in the UK

I put dna air box power commander m4 exhaust and dropped a tooth on front sprocket and up two on rear she’s a wheelie ride now

@RamboRob

4 жыл бұрын

Damn, are you stunting it? Cause stock it loves to wheelie just whacking the throttle open

Found a vid of a guy that did 3 runs. 4.06 sec was his fastest and he said he thinks there's a spec somewhere that says 3.8 sec. There's one other bike I was considering, the Royal Enfield gt650 until I learned the 0-60 time I found was not correct at around 4sec but actually up around 6.5 sec which makes sense considering hp numbers for these bikes. kzread.info/dash/bejne/ZYKbza-Ecdyzj7Q.html

If u rode that bike in Ireland no back mudguard u would be distroyed

@JJackMoto

4 жыл бұрын

Good to know next time I ship my bike over to Ireland for a quick ride ;)