Just got a '08 Yamaha Vino 125, what a fast little scooter, 55 mph and I weigh 220, it pulls like a dirt bike;) life is good!!!!!!!

Thanks Mitch, I bought a Vino that had a misfire and cut out from time to time. After watching you're video I followed the procedure and now no issue at all.

@MitchsScooterStuff

2 жыл бұрын

Right on Andy! Ride safe 🤙🏼

Just got a Vino 125 and Mitch’s videos have been excellent!!! I had trouble reinstalling my exhaust because it was damaged from a previous wreck. I hammered and pried it the extra 5mm it needed to line back up with the mounting points on the block, because I can’t afford 200-400 for a replacement exhaust. I’m quite satisfied with the results from removing the emissions system. The acceleration is much more linear. Before there was a noticeable hesitation at around 10-30mph, but now it’s nice and smooth 👍👍

I removed the emission from my 2008 Vino (this after I installed Dr. Pulley sliders). Mitch rocks. Good instructions. Quieter, faster, Speed Racer. We're still not polluting as much as the Koch Brothers. Minimal I'd say. Good stuff. Thanks.

Wiw big up for you man you are the best in fixing All the love from Tunisia 🇹🇳

Thank you for sharing Mitch. Great step by step instructional video. My next project definitely.. with my oil change

@MitchsScooterStuff

2 жыл бұрын

You’re welcome!

Welp, i know what im doing tomorrow. Thanks mitch! Always keeping me busy on my new projects!

@MitchsScooterStuff

10 ай бұрын

You got this!

Thank you again your videos have inspired my life I know dont trust any one with spanners near my soxxter but me u have showed me the way and its the best way do it your self and then you know its dune right love you alway and forever my scooter purrs because of you x

@MitchsScooterStuff

3 жыл бұрын

You’re welcome! I am so happy to help and this comment made my day!! Ride safe 🙏🏼

great to see you riding, loved the end of the video, thanks for sharing

@MitchsScooterStuff

3 жыл бұрын

😎👍🏼👍🏼 I will get some more riding videos

@mrdave22

3 жыл бұрын

@@MitchsScooterStuff you're the best !

Nice tutorial. Good use of the bolt for a block off plug.

@MitchsScooterStuff

3 жыл бұрын

Thanks Paul 👍🏼

ciao bravissimo come al solito ti seguo in ogni tuo lavoro

Very clever to film the reassembly during the disassembly. 👍

@MitchsScooterStuff

3 жыл бұрын

😎👍🏼👍🏼

Thanks for the informative video... mine had a rough high idle and this mod fixed it. Im sure it was sucking air somewhere from unnecessary hoses, so thanks!

@MitchsScooterStuff

6 ай бұрын

Welcome!

Nice Mitch! I’ve been wondering if it would perform the same and looks like it’s slightly better !

@MitchsScooterStuff

3 жыл бұрын

😎🤙🏼🤙🏼

Always happy to see the Vino in action.

@MitchsScooterStuff

3 жыл бұрын

Awesome 😄🤙🏼 I will do more!

I’ve looked over the emissions system and don’t see anything that would limit power other than perhaps the catalytic muffler restricting flow. Only reason I can see for the performance increase was perhaps the carb pulling more fuel with the vacuum hoses capped off. A larger jet in the carb would probably achieve the same result. A free flowing muffler and carb rejet would probably be the easiest engine upgrade for more power. And of course variator tuning can really improve a bike for your riding conditions, ie flat or hilly. A windshield can give a couple more mph on the top end as well.

@mlindsay527

2 жыл бұрын

After thinking on it some more, maybe the EGR could reduce performance a bit. I might try pinching it off and see if it makes any difference…

very detailed video braddah, thank you

Hey Mitch! Great videos, I just recently purchased a 2007 Vino 125. I have such a headache looking for 3 pieces you have on your Vino. The taillight and the two rear turn signals. Could you post or write where I can go to purchase a set for me, please?

U give me relaxing Vibes

@MitchsScooterStuff

3 жыл бұрын

😎👍🏼👍🏼

Thank you for you videos ,,,I have 150cc chinese scooter, running great, new carb, I decided to do an upgrade and add a uni intake, I used a custom raidiator hose to fit under the frame,and remove some emisions, and stock airbox, I changed main jet from 103 to 108 and no matter where I move the idle or mixture screw, it starts, then just dies and after 30 secs no warning, it gets very boggy on throttle and when I took it down the street it was not as fast and was a bit "chuggy" and "bucky" this happened with 100, 105 and 125 main jet, the vaccum hose from the manifold is connected the same and the PCV and the other emisions vent that were going into the old air box are just vented into the air and zip tied to the frame, do have any idea what happened? The scooter was running great before I did a few things, could it be the needle? what do you think?

The side cover mounted turn signals are awesome! Can I get those in the states?

Hi Mitch I follow you from France. I like your videos .... Keep it up .... Well done.

@MitchsScooterStuff

3 жыл бұрын

😎🙌🏼

hey man have you ever had any problems with your cdi box in the yamaha vino?

Aloha Mitch, say...my vacuum plug kit has a plug big enough to cover the axel bolt plug location. Can I use the rubber or is it heat related that you use the metal plug, then rubber? Thanks, and have a great week

Hey Mitch. I’m missing a bolt that attached the exhaust from the engine. Do you happen to know what size it is ? And where I could find one ? Cause I don’t want to crack the engine with a different size bolt.

Hey Mitch . I really enjoy the simplicity of your videos. I recently bought two Vino 125's and have used your videos as I go through them. Do you happen to know any forums that are active on this bike? I guess there used to be a yahoo group that had lots of threads and pertinent info on the vino 125, but they shut that forum down. Anyway, keep up the good work!

@JetSkiBuyFixPlaySellChannel

3 жыл бұрын

Chance are you can find a group on Facebook.

@MitchsScooterStuff

3 жыл бұрын

Thank you Clay! Yes there is a group for vino on Facebook like untip said 👍🏼👍🏼 awesome on getting two vinos!

nice video, thanks Mitch

@MitchsScooterStuff

3 жыл бұрын

🙏🏼🙏🏼

hello, great video. any tip on how derestrict Vino 125cc without adding parts?

I need plastic for 1984 elite 125 do you have a place you know of to get parts

great video do scooters get smog tested in Hawaii?

What WT size Rollers do you recommend?

Right On Mitch.

@MitchsScooterStuff

3 жыл бұрын

Thanks Chris!

Do not give up ♥️

@MitchsScooterStuff

3 жыл бұрын

😎🙏🏼🙌🏼

Sweet graphics in that scoot!

@MitchsScooterStuff

2 жыл бұрын

Thank you 😄👍🏼

great bro!!!!

What year is that Yamaha? I'm working on my 1993 Yamaha Riva 125 and only had some emissions I removed when I changed my Carb. It's 5 degrees outside today so I won't get back to it till April. Cool videos and I looking for more.

@MitchsScooterStuff

3 жыл бұрын

It's 2006. That's awesome, dang that's cold!!! Looking forward to hear from you when you ride it again :) Thank you! A ton more videos coming!

Do you need to re-jet at all after this?

Perfect...👏🏼👏🏼👏🏼💪🏼

Won’t these instructions work for the zYamaha Vino 125 also?

i wish u make a video of a Yamaha Bw's 1994 50 cc how to fix i have that and i see no video how to fix it hm...

@MitchsScooterStuff

3 жыл бұрын

I have some Zuma's that need to get fixed up... will do this summer

Hey Mitch make a video of conversion gas to electric moped please!!! 🙏

is it more realible when removing that system more power more good? .

@MitchsScooterStuff

3 жыл бұрын

Yes it is, now not just blowing the hot air around, I did on Vespas and Piaggios for years too

I've had my stock vino125 up to 61mph GPS verified but I have trouble with warm starts and I think it's the emission

@GentleSerpent

Жыл бұрын

What app do you use to verify the mph?

@cheeseandpickles98

Жыл бұрын

@@GentleSerpent Google maps and a Garmin

HELP! I was about to clean my V-Belt filter and when I took off the first shield I found a tube that is dangling and looks like it should be hooked to something. I wish I could send you a picture here. URGH I've been having issues with only being able to go 22 mph and then very, very slowly climbing to that.

@MitchsScooterStuff

2 жыл бұрын

Hi Diana, that should be ok, there are some tubes that are just hanging without plugging to something... they are for breathing ... Wow 22 mph? On your Vino 125? Sounds like you have bad rollers and need to replace.... I have CVT parts replacement video... check it out

I ordered a generic fuel tank to replace my rusty nonrepairable one and it doesnt have a port for the evap line. Will it run fine if I delete the app cap system only?

@samgrissom7274

Жыл бұрын

Hey Toasty. I bought a Vino 125 with no fuel tank. I can not find one new or used. Were you successful using your generic tank? Did it work without the EVAP system? And finally, which generic tank did you buy? Thank you in advance, Sam.

@toasty925

Жыл бұрын

@@samgrissom7274 The one I purchased is called Trkimal Metal Gas Fuel Petrol Tank for 50cc 70cc 90cc 110cc 125cc Roketa Taotao Sunl Coolster JCL ATA Baja MotorsportsVitacci BMS Buyang Coolsport Eagle Peace kazuma ATV Quad (Metal-B) on Amazon. It's made for a ATV/Go Kart but will slightly fit by using scrap pieces of flat steel/aluminum as brackets to center the tank close to the chrome housing. I got the filler neck to partially line up with the chrome housing (lip of cap rubs on the housing) and went to a local orileys autoparts store for the fuel line. (I believe I used 1 foot of Gates 4219XL 3/16" fuel line) But I would bring the entire tank to the parts store to confirm. The line included with the tank will not work and leaks fuel all over the place. I also ran an inline fuel filter (not from the tank kit) between the line coming from the tank to the line going to the petcock because the fuel line size is different but will fit on both ends of the fuel filter (that has a step sized male end). Because the tank doesn't have an evap line port, I deleted the entire system and plugged the carb port with a rubber vacuum plug (bought a random assorted box on amazon) The tank itself is vented at the cap. The tank capacity feels like it's between 1/3-1/2 gallon. I was able to travel close to 40 miles on a full tank and the fuel level was pretty close to empty. Hope this helps.

@samgrissom7274

Жыл бұрын

Thank you for your timely and thorough reply, it is greatly appreciated.

Nice👊

@MitchsScooterStuff

3 жыл бұрын

Thanks Stefan 👊🏼

is it legal to remove the whole system? benifits and will removing this will destroy the engine?

@MitchsScooterStuff

3 жыл бұрын

Just depend on where you live... where I live do not require emission test so it’s fine to remove... no it will not hurt then engine... it’s just hot air blowing around...

@MitchsScooterStuff

3 жыл бұрын

It runs so much better on acceleration and little more power, gained 4-5 top speed mph

@Abhishek-C92

3 жыл бұрын

@@MitchsScooterStuff thanks , take care

Hello ,Mitch! I like your Stuff. Please ,tell me ,who is videotaping during master?

@MitchsScooterStuff

3 жыл бұрын

Aloha thanks! I filmed all myself

@user-qg4ur4vc1f

3 жыл бұрын

@@MitchsScooterStuff It's cool! what kind of camera do you use ?

@user-qg4ur4vc1f

3 жыл бұрын

you get great camera angles! what are you installing the camera on?

I did not know that model but not only does it limit the final speed, but it also has less acceleration .. Greetings from Argentina

@MitchsScooterStuff

3 жыл бұрын

Less acceleration? Oh no... when I got emission system removed... the acceleration is sooooo much better.... it is awake up 😎

@lonewolf3833

3 жыл бұрын

@@MitchsScooterStuff I meant that before making the modification I had less acceleration, excuse my English

I removed everything but the air pipe and capped it off by the muffler no heat issues

need to find a turbo for the vino haha vroom vroom

@MitchsScooterStuff

3 жыл бұрын

Haha that would be fun!

Just stripped down my Vino and realized I’m missing most of the screws holding on paneling haha 😅

Does it make the bike faster

@MitchsScooterStuff

2 жыл бұрын

I guess you didn't watch the video

I can still see Emission System in its place???Why did you return it

👍👍👍👍👍👍👍

Hello where are you from?

@MitchsScooterStuff

3 жыл бұрын

Hawaii

@kubatyrka3110

3 жыл бұрын

@@MitchsScooterStuff wow❤

I can drive like 1 to 2 miles and mine dies like it runs outta gas

In the Netherlands IT is illigal tot do so.

@MitchsScooterStuff

3 жыл бұрын

Shhh 🤫 Yeah illegal in California.... so I made this routine without cut off or break parts so they can put them back on before go to inspection shop.... I'm in Hawaii that they don't do emission test on scooters so I'm safe :)

Bonjour messieurs moi je habillage de ma moto yamaha forte 125 mais je suis en Côte d'Ivoire

Sorry, I thought this video was for the Zumba.

@SOLDGREEN

5 ай бұрын

I heard your moms a zumba 😂

I have a 2009 vino 125. Where do I find the engine number. Thanks. Bob

@MitchsScooterStuff

2 жыл бұрын

Hi Bob, It’s right by the bottom of rear shock and transmission oil filler cap

Great video, glad that my Kymco doesn’t have a very complicated emission system. To everybody who wants to have this mod, please mind the legality of this, get in touch with the DOT or whatever to make sure it’s legal in your state, don’t get into trouble. Have a good day.

@MitchsScooterStuff

3 жыл бұрын

Thank you! Yup, I forgot to put info in description 😆

@hondasilverwing3100

3 жыл бұрын

@@MitchsScooterStuff I live in California straws and taking off emissions systems is total illegal. But Governor Newscum totally looks the other way when it comes to shooting up heroine in plain sight in public places and deficlating on sidewalks

@jake2772

2 жыл бұрын

Lol it’s a scooter no one cares about emissions on it at all 🤙🏼

Good whork 👌👌👌

It says here: ".. Filmed by Mitch Bergsma... " You are only filming if you load a camera with film. If you're not doing that, you are videoing. Remember: video cameras, that includes phones, don't use film, therefore, when you use them you are NOT filming, you are videoing. It's simple: No film, not filiming.

@justice4kurt182

Жыл бұрын

Remember: don't be a dick head.

@budgetbuilt8838

11 ай бұрын

I can tell you don't have many friends.