There's a lot of people complaining about the shims on the springs. Go to Philippines and third world countries. We made worse repairs. The only thing in our mind is to make costless repairs because new parts is hard to find and so expensive. Thats why we fabricate a lot of things just to make the job done. Why don't you guys appreciate paul x efforts just to help somebody in need. He will not add spacers if he knows in can cause a big damage and engine wreckage. Good job mate. All your work is fantastic. Theres just a lot of "GENIUS" people here in the comment section because theres a lot of parts available in their countries.

@janjandraper9378

2 жыл бұрын

tama ka boss.. 💪💪💪

Anyone who worked on earlier Yamaha's would know about 'the fix'. Personally, I think Yamaha should have learned by now the clutch design damper is pretty crap. It's been an issue since the late 1960's with the TX/XS 650's. Too late now but it's better to make some Delrin rods about 0.020"~0.030" (0.5~0.7mm) longer than the fully compressed spring and fit them inside the springs. With the buttons taking up the space, the springs will eventually fail with bits of spring steel flying around.. I forget if it was the 350 YPVS or the earlier RD 350 that was so bad Yamaha sent dealers repair kits for brand new bikes as the broken springs could lock the primary drive when they failed. (someone screwed up the heat treatment) The repair kit used flat head Allen bolts instead of re-riveting. Trying to compete with Honda led to some horrible factory 'mistakes' during production

The video and the comments are all very helpfull. Thanks for sharing!

Very good I have got exactly the same thing to repair (the rivets) though the basket has had the cush springs disabled by welding which probably caused the rivets to break. The engine that its out of is used in a speedway side car racing setup so lots of traction and abuse I havent taken it apart yet but may make the rivets bigger.

Years ago, on the old gs1000 and gsx1100, where those springs are, we took them out and replaced them with a piece of square Aluminium block. Bit harsher on the take off, very direct, but bullet proof

@pbysome

10 ай бұрын

Ok if you have a crush drive on the rear hub but disastrous if you don't.

Какой материал использовали для заклёпок?

Fantastic, I like it.

Excelente trabajas muy bien te felicito, le pones corazón a lo que haces

Excellent really good job bro

my r1 clutch rattles until i pull the lever in.. is it the same problem?

Hola vaya pedazo de trabajo,vengo sufriendo el ruido del embrague en cuanto arrancó en frío y la verdad que funciona bien pero cada día hace más ruido por donde yo vivo nadie se dedica a eso y se me hace mui difícil poder arreglarla sabes de alguna campana que se venda que esté con esta reforma o podría mandarte la mía y repararmela? Gracias

Keep it up , fabulous work thumbs up 👍

what year of this R1 clutch repair ?

Nice job...thanks...💥💥💥🚀🚀🚀👏👏👏

Quem é profissional sempre mostra suas habilidades. Ótimo trabalho

excellent craftsmanship mate, loved every bit of it, out of curiosity, with the rivets, rather than hammering it, could it have been done with an E clip? a noob question, i know, but i figure learning from the best of both world (machinist and mechanic) is great way to learn

@PaulXchannel

4 жыл бұрын

Thanks.

Eres un crack estupenda video ..

GOOD WORK THANKS YOU.

Hello paul, nice work! Is it possible to do this on my bike to because mine has the same issue ?:)

What are the yellow and blue springs outer diameter and is it the same for 2007-2008

Hello Paul, How do you charge for the work? I have the exact same problem :)

excellent video

would the weights of the pads effect the balancing of the basket when it rotates ?

@dongmauanhhung9373

Жыл бұрын

Không ảnh hưởng nhiều vì tốc độ quay của bộ li hợp rõ ràng chỉ bằng 1/4 so với tốc độ quay của trục khuỷu

Have you tested it? Is it still holding or the rivrts broke and also demaged your engine

@PaulXchannel

3 жыл бұрын

I only share tried and tested works.

Increíble 👏 👏👏👏

Ciao ho visto il lavoro che hai fatto lo devo fare anche io. Mi sai dire il tipo di acciaio che hai usato. Grazie

I just sent my KZ1000 outer clutch basket to ape in Rosamond California to do the heavy duty springs and put her back together so 175 bucks and hopefully I get it back this week

Can you make these? I really need mine done and it looks like you need quite a bit of equipment to get it done

Hey great work,how much for the work

Công việc của bạn tôi thấy nó rất tuyệt vời😊

2013 yamaha R1 için uyguladım sonuç süper. very helpfull thanks

@ayoubchari510

Жыл бұрын

Still working good ?? I hope you reply back 🙏🏻

@muratgundas

Жыл бұрын

@@ayoubchari510 it definitely works fine. a total of 17,000 km of roads

@muratgundas

Жыл бұрын

@@ayoubchari510 it definitely works fine. a total of 17,000 km of roads

Здравствуйте! И на сколько по времени или километражу хватит данной процедуры? Хочу так же сделать на корзине сцепления Yamaha R1 2004 года

07:00 To fix the new rivets, a groove is turned and a seger ring is placed, thus avoiding messy hammering‼

Bạn là bậc thầy sửa chữa

Where can I send my clutch housing to for a repair

Should there be ANY play between clutch basket and gear? Or they shouldnt allow to move one from eachother at all?

@PaulXchannel

4 жыл бұрын

Hi, I didn't disassemble the engine. I was just repairing the basket.

@sebrandomstuff

3 жыл бұрын

Only the play that the springs allows. If the basket is with no tensión should not be any play

Hi Paul,amazing job.i am having the same problem with mine basket .how wonder if you do jobs like this for leave?if you do where about are you?

@PaulXchannel

4 жыл бұрын

Thank you.

can you put the right dimension on the bolt for basket ? and for the spring also , many thanks

@PaulXchannel

Жыл бұрын

Sorry.I don't remember anymore.

can use ton press/hydraulic press for riveting?

@PaulXchannel

4 жыл бұрын

No , just the hammer.

04:45 The supplements in the springs change the compression coefficient and make the transmission of torque more rigid☝️

@pdr5926

3 жыл бұрын

He is just taking up the slack. The compression coefficient remains the same.

Nice video! I have a question, if you can reply me it would be awesome! Can a clutch basket creates vibrations at any RPMs? I hear some sounds from clutch, light sounds... But my bike vibrates alot, in handlebars, seat, footpegs... I changed the oil, plugs, chain and sprokets, i checked the tires! The vibrations goes away while i'm pulling the clutch at any speed... If the clutch cause vibrations, can you explain me, why? Are the springs behind the clutch?

@PaulXchannel

10 ай бұрын

maybe the crankshaft

Currently working on my 04 turbo r1 and Need to get mine done...how much do you charge?

@davidbrown7375

Жыл бұрын

Did you ever find anyone to do it? I need it done aswell.

Hi what material did you use for rivets

@PaulXchannel

4 жыл бұрын

Some steel

This Awesome ☝👍💪

@PaulXchannel

4 жыл бұрын

Thanks

im worried that padding would make the clutch basket rotation not center anymore and will cause vibration, great job btw

@PaulXchannel

4 жыл бұрын

Thanks. Don't worry it work well.

Do you repair grooved baskets too? If so do you have a video? Good stuff man.

@PaulXchannel

4 жыл бұрын

Thanks. Yes, but I don't have a video. I will do in future videos.

Do you know where to buy the springs for the clutch basket

@PaulXchannel

Жыл бұрын

No

hey there, what's up? i have the same problem, can i send you my clutch? i need someone makes this work for me how much is this work?

What an excellent job. Wish I had a lathe

Just leave it rattling. It'll sound like a Ducati 😂

Nice job, was there anyway you could have compressed the springs and slotted in the packers ???

@PaulXchannel

3 жыл бұрын

I had no other springs.

@davidcort2857

3 жыл бұрын

@@PaulXchannel Iv'e just worked out that you had to break it apart to get the springs out, so you could have put the spacers in from the top anyway.

@PaulXchannel

3 жыл бұрын

This way it's better for safety

@davidcort2857

3 жыл бұрын

@@PaulXchannel Marvellous.

What type of steel do you use for rivet????

@PaulXchannel

4 жыл бұрын

Sorry , i don't know exactly. I think CrMo.

Bue video I would like you to give me the measure of the ones and ciste because I have the same problem and want to solve

@PaulXchannel

4 жыл бұрын

Hi , thanks . Sorry i don't remember dimensions . All is just improvisation in my workshop.

Espectacular

@PaulXchannel

4 жыл бұрын

Thanks.

Good video ... And do you have vibrations when descending from revolutions at about 5 thousand? I have them after using the sleeves ... Let me know how it is with you ...

@PaulXchannel

Жыл бұрын

No problem

@przemekkadunski1719

Жыл бұрын

@@PaulXchannel thanks... Well, I have light vibrations ... and I have the same bushings ... And how long have you been riding this clutch?

@PaulXchannel

Жыл бұрын

3 years

Para remachar ubieras usado la prensa hidráulica por lo demás 👍

Exelent

Anyway I can send you mine to have it repaired?

enak mau benarin apa jua klo alat y lengkap... klo saya spring yg amblas di stel ulang lalu sepuh lagih...👍

Hay paul great video man any chance you remember the dimensions of the steel rivets and the buttons for the springs would be much appreciated cheers

@PaulXchannel

4 жыл бұрын

Hi, I don't remember, all was improvisation. Thanks.

I need that how I can comunication with you

Hey Paul, same problem 2006 R1. If I send it. Can you do the job for me?

@PaulXchannel

4 жыл бұрын

No problem.

My motorcycle, when I follow you, it turns weak, what can I do for you?

😎 cool

Good idea, but the shims can jump out if the springs get shorter. This is a way to disaster... Did you try to find suitable springs?

@PaulXchannel

4 жыл бұрын

The shims cannot jump out. Even if they were half of spring.

@evgeniybeschastnov4627

4 жыл бұрын

@@PaulXchannel maybe I am missing something, but it looks like it can get out if the part of it which is inside of the spring gets out of it.

@PaulXchannel

4 жыл бұрын

@@evgeniybeschastnov4627 Don't worry it work well. I only give good things here.

How much to do this ???

👍👍

hi Paul.. watching from the Philippines.. is it posible to sent you my clutch housing housing for repair too?.. same as that spring type dumper..waiting for your reply.. thank you..

@PaulXchannel

2 жыл бұрын

I do not provide such a service publicly. Thanks for watching.

😀😀👍👍good

@PaulXchannel

4 жыл бұрын

Thanks

Hi how much for that repair ?

Why didn't you just get naw spring made? and just a tip for next time make a tool with 3 posts that stick up, put the basket in a press with the rivets on the 3 posts load the bell washer with the press then pean the rivets over

@PaulXchannel

4 жыл бұрын

OK

nice vid, although idve used proper riveting tooling to get an ssured terminal at both ends, loks a little precarious

Me before 3:30. how is going to find a new springs? is he going to be a sav and make his own. Me after seeing the shims. OOOhhhhhhh.

Davvero un bel lavoro su che anno di R1 l’hai fatto?

@PaulXchannel

4 жыл бұрын

this year

@lexduke5321

4 жыл бұрын

In pratica é un sistema parastrappi? Ma le molle ormai snervate non saranno da buttare ? Ad ogni modo gran meccanico

@GarageBuddys

4 жыл бұрын

Lex Duke il sistema para strappi già esiste come sulle auto, però lui ha messo delle boccole per riempire lo spazio che si è formato fra disco e molle, c’è da dire che se si è formato dello spazio è perché le molle sono snervate

can I send you mine for a rebuild

The springs are fatigued and should be replaced in my humble opinion. I have no doubt these springs can be obtained if you search online not necessarily for motorbike but for press tool release. Notwithstanding that your work is great to watch thank you

@PaulXchannel

4 жыл бұрын

Ok. Thanks.

@maciek600r

4 жыл бұрын

Hi, I also regenerated in this way. I also made extra washers and after some time slack and crackling appeared again, sometimes the springs would break. Generally, there must be new springs of similar weight because with washers we already have other rotating masses and the springs do not fulfill their role as a vibration damper at idle speed and some kind of shock absorber when connecting and disconnecting the clutch, and when accelerating and braking the engine. I like your work very much and I know that you will need my experience and you will successfully repair many clutches 😉

@PaulXchannel

4 жыл бұрын

@@maciek600r New springs are always better.

@chrisstephens6673

4 жыл бұрын

Indeed you are correct about new is best but in some parts of the world that might not be an easy option.

@maciek600r

4 жыл бұрын

@@chrisstephens6673 only custom springs, because Yamaha sells whole baskets

Awesome video except for the shims, replace the springs.everything else I will be doing step by step on my clutch

@pbysome

10 ай бұрын

The wear is in the aluminium basket not the springs, it's a common issue and this is a good fix.

@Pizdzirynka1

10 ай бұрын

Don’t think where spring sit is made of alloy

@pbysome

10 ай бұрын

@@Pizdzirynka1 I do believe you are right, I've done this mod many times on gs1000 where the pockets are aluminium so I assumed , never the less the buttons work well enough to be of no consequence and though you are right that new springs are better they are bloody expensive so the good outweighs the bad.

@Pizdzirynka1

10 ай бұрын

@@pbysome that’s all good, the springs are impossible to find anyway so this fix is probably second best option

@pbysome

10 ай бұрын

@@Pizdzirynka1 they can be had but they are a fortune and the process of measuring and spring rate length diameter and then getting that across to the sales people.... been there not good. I can get them for gs1000 but they are expensive and I see no issues making buttons, never had issues.btw I Tig the rivets, use the originals it makes the repair quite inexpensive.

Can you do my basket? Same problem

@PaulXchannel

4 жыл бұрын

No problem.

which model year?

@PaulXchannel

4 жыл бұрын

I don't know.

Dar matosi išdilę grioveliai nuo diskų.

Nice video. But I don't believe on comressed pins...😮

io l'ho fatta si fz1 2007

@endurocenter6420

3 жыл бұрын

Ciao,mi potresti dare qualche info ,io ho un r1,dove posso scriverti?

Делал тоже самое в 2014 году

@user-om4bn9ok4c

4 жыл бұрын

Сколько проехал ?

@oblomsubaru

4 жыл бұрын

@@user-om4bn9ok4c да дохрена, не считал

@user-om4bn9ok4c

4 жыл бұрын

Тыс 20 проехал или больше

@oblomsubaru

4 жыл бұрын

@@user-om4bn9ok4c около того, потом продал, скорее всего до сих пор катается

@user-om4bn9ok4c

4 жыл бұрын

А какой метал сталь или мягче

You don't have press tool

The rivets hermosos!

cb 500,94- 2005 too is defect!!

Hello. great idea ... but these springs now have a different weight from the others. There will be vibration and another repair in a moment

@PaulXchannel

4 жыл бұрын

Thanks for opinion.

just imagine that this bike rews more than 13.000 RPM and this "repaired clutch basket" just crashed right at that RPM. What about new springs and original rivets instead of putting more weight to the clutch?????

@PaulXchannel

4 жыл бұрын

Don't worry. The rivets keep only sheet.

Грибки вставил не под все пружины, балансировки нет никакой

uh... that might fall apart!!

@PaulXchannel

4 жыл бұрын

Don't worry. It work well.

The springs are out of spec. Why did you add spacers? This is insane. This is like making a sprocket with fatter teeth when your chain stretches.

@PaulXchannel

4 жыл бұрын

This is rescue of the basket. The one way when there are no new springs.

@matt3122

4 жыл бұрын

@@PaulXchannel Doing repairs like this is dangerous. Do you feel comfortable with someone driving that R1 on a track at +150mph with this type of repair? You're talented but you're not thinking well.

@matt3122

4 жыл бұрын

@@PaulXchannel What does any service manual recommend for out of spec springs? It is replace them. Don't shim springs that are out of spec.

@PaulXchannel

4 жыл бұрын

@@matt3122 Don't worry . It works well. The rivets do not hold the torque butt sheet with springs.

@matt3122

4 жыл бұрын

@@PaulXchannel u r crazy dude

It maybe a daft question but what are the symptoms of loose Cush springs ? could it make gear change a bit difficult ? or what are the symptoms and reasons for doing this job in the first place a Nooob to this :-)

Hi. Is it possible to contact you via email or IG/FB? I have same problem with mine clutch basket on SV 1000S. Thanks.

Same shit on dl650 vstrom.

It's easier just to go buy a new one

@PaulXchannel

4 жыл бұрын

Buying is always more easier than repairing.

@monterz.474

4 жыл бұрын

700...only. For e better do this job and spend 700 or fuel ;) .

not good repair in my opinion. You added extra weight and all clutch basket now is out of balance when spinning.

Just buy new spring 🤣

@PaulXchannel

4 жыл бұрын

It was great if they could buy. Give me the link to the store here.

Detonation in 3 2 1. 🤣🤣

New clutch have the same spring play, all you do is wrong

@PaulXchannel

4 жыл бұрын

Now it's better than new ;)

@matt1625

Жыл бұрын

What is the cause of the rattling? I just got new clutch and can confirm same spring play. Help!

@PauloSergio-rp2kx

Ай бұрын

vc é. de. onde

@user-qb1nv9ol3k

Ай бұрын

@@PaulXchannel stupid

I can do this riveting job much better than this...

@PaulXchannel

4 жыл бұрын

OK