I just wanted to thank you for posting this video and the one prior on how to remove the carburetor. Your instructions were easy to follow (yeah, this single mom of 4 who lives on a farm needs her 4-wheeler running) and I was able to diagnose, remove, and rebuild my Yamaha Grizzly 350 carburetor. Runs smoothly now. Next, it's changing the oil! Thanks so much for this series on my exact model.

@billymorgan2646

Жыл бұрын

How about the brewing 350 2005

@billymorgan2646

Жыл бұрын

I'll learn cerebral different things that show video you help me out with 2005 brewing carburetor this four wheeler kit for a couple years yes coming out the overflow

@MidNebraskaMotorsports

Жыл бұрын

YES!! Happy to help Tracy. let me know if there is anything else I can help with. If you need parts, reach out and I can offer a discount. Thanks for watching and the comment. We have hundreds of videos yet to post. Hit the subscribe button so you are notified when we get them posted. Also check out: www.ebay.com/str/midnebraskamotorsports

Excellent video👍, will be using to rebuild exact carb. I can't find the spec on the float level? Carb BSR33-73. 08 Grizzly.

Are you able to do one about the ignition coil diagnostic and replcement? I’m having trouble with mine. I did maintenance on my old grizzly. Followed your older vidoes

Good video very well explained and educating help me fix my atv 👍

@MidNebraskaMotorsports

2 жыл бұрын

Happy to help. Let us know if you need anything. ebay.com/str/midnebraskamotorsports

@billymorgan2646

Жыл бұрын

Ok thanks

Hi How many revs (turs) there was on your air-fuel mixture screw? Or how many revs do you applied?

I'm having a problem, that it idles fine but bogs when I push the gas, the funny thing is if I put my hand over the filter side to restrict some air it starts to Rev up, so I'm wonder is that acting kind of like the choke by doing that and maybe I need to go up a size on the main jet, this is on a rhino 660, same carb and engine

I need to see a video on a 2005 bruin 350 of how to clean out the carburetor

@MidNebraskaMotorsports

Жыл бұрын

Billy. Great news!! We have one coming. Hit that subscribe button so you are notified when the video is posted. Thanks for watching!

Could you repost brass cap video link, Thanks!

Hey in the video it talks about the brass cap video being linked below, I don't know where that video is? Anyone able to point me in the right direction?

Replacement of the rear driveshaft

@MidNebraskaMotorsports

Жыл бұрын

great video idea. hit that subscribe button so you are notified when we get it posted. Thanks for watching!

I'm seeking I'm I need to see the 2005 350 brewing rebuild

@MidNebraskaMotorsports

Жыл бұрын

Great machine. Hit that subscribe button. We have some bruin videos coming soon! Thanks for watching.

Can you provide the part number for the rebuild kit? Your link doesn’t seem to work. Thanks

@MidNebraskaMotorsports

Жыл бұрын

Thanks for watching Nathan. Sorry that link didn't work. Here is one that should: amzn.to/3QGHYB6

You never said what clockwise does on the idle adjuster screw. (got side tracked). Does it raise or lower idle?

@MidNebraskaMotorsports

Жыл бұрын

Clockwise will raise the idle. Thanks for watching. Check out our other Grizzly 350 videos coming up!

@warrenburns1621

Жыл бұрын

@@MidNebraskaMotorsports where is your brass cap video?

Is the float valve and seat standard fit? I have a Bruin 350 that needs replacement of the float valve and would like to purchase the carb kit. Thanks.

@billymorgan2646

Жыл бұрын

Needles in great shape adult saw any gaskets it was probably just a float adjustment

@billymorgan2646

Жыл бұрын

Everything is good I know how to adjust the float is a piece that I don't know where it came out from it appears to be a spacer quarter of an inch long be a spacer but I'm not sure which one it came out of a short it's included in your video

@MidNebraskaMotorsports

Жыл бұрын

Floats and needles are specific for your model of Bruin. Thanks for watching and the comment. We have hundreds of videos yet to post. Hit the subscribe button so you are notified when we get them posted. Also check out: www.ebay.com/str/midnebraskamotorsports

Couldn't find the brass cap link

@steveromano2246

2 жыл бұрын

Greatest and very well explained. Tanti auguri make more

Towards the end of the video you never explained the brass bolt. You started explaining then skipped.

I can't see anything this guy is doing. The camera is a bit far away

@MidNebraskaMotorsports

Жыл бұрын

Were you zoomed in or something. The video is clear for me. Let me know how I can help! Thanks for the comment!