The best tutorial video I’ve ever seen. Not too much unnecessary commentary, very explained with what you are doing, and good video angles for all of it. If only every tutorial video could be this good.
@2strokeguru
3 жыл бұрын
Thank you
@smallgaragehustle3 жыл бұрын
Great video! You truly are a patient and skilled mechanic.
@2strokeguru
3 жыл бұрын
Thank you I appreciate that
@eagleeyepitts78035 жыл бұрын
Nice. Glad you made this video because I need to clean my carburetor. This video helps a lot in locating it.
@2strokeguru
5 жыл бұрын
Welcome
@jamessims8953 Жыл бұрын
Great Video… good detail
@2strokeguru
Жыл бұрын
Thank you
@dkad71774 ай бұрын
Two big thumbs up!! Well done, thanks for the great in-depth tutorial...especially on the choke and throttle cable. Thank you!!
@2strokeguru
4 ай бұрын
Very welcome
@ad747103 жыл бұрын
excellent video, i have learn alot the only challange is the cab of the carburator having extra lentgh that cable will be pulling the slider little up, the solution is to put the OEM cap on and problem will be solved
@2strokeguru
3 жыл бұрын
Thank you some of them had taller caps
@ingeniousmechanic4 жыл бұрын
Good video, can't be a shade tree mechanic without a shade tree kid and a dinosaur.
@Mr.Minzcent20 күн бұрын
ive tried getting a new carb, with patience you could get a brand new one, but id suggest just replacing the jets on the old one so you dont have to retune it
@river35964 жыл бұрын
Very helpful thank you, I'm having trouble getting the timing sprocket off. It keeps spinning. Do I need an impact wrench? I'm new at turning wrenches, but I'm gonna get this done.
@2strokeguru
4 жыл бұрын
What is wrong with the engine
@kingkodiak16285 жыл бұрын
Great video Kevin
@2strokeguru
5 жыл бұрын
Thank you
@2strokeguru5 жыл бұрын
It doesn't connect to any thing goes straight back the purpose of the tube is to prevent dirt from going into the carb so it needs to be lower than where it connects to the carb
@roywright94
4 жыл бұрын
What type carburetor is that
@2strokeguru
4 жыл бұрын
@@roywright94 Chinese knockoff of the factory looks original but it is Chinese Yamaha breeze and Yamaha grizzly 125 are the same bike
@connylarsson93972 жыл бұрын
Hi! If I clean the airfilter and take the fuel away it will start again. The fuel seems to flow through the carb if I do not turn off the tap. Yamaha Breeze, 4-stroke?
@donschlottmann37023 жыл бұрын
On the idle mixture screw. Do you turn it to the left all the way till it stops and then do one and a half turns open?
@2strokeguru
3 жыл бұрын
Yes till it just stops then back out 1.5 turns out then start the engine let warm up and fine tune it
@paigekoenig93236 жыл бұрын
Hi Kevin! I wanted to know if you could message me, I was wondering if I could get some advice about this KE100 im looking at, and whether or not to pass on it.
@nicaskey15 жыл бұрын
Hi Kevin- what did you connect that carb top vent tube to?
@Jeezy11
2 жыл бұрын
I’m trying to figure that out too. Have my carb disassembled right now and cleaned it but mine looks cut off idk if it was supposed to be somewhere
@HomeGrownPyro14 жыл бұрын
Thanks for the vid it was very helpful. Question for you, the petcock was leaking on the breeze I picked up for my daughter so I took the one off an extra tank I had and put it on. Well its a little different I think as it has two tubes coming off it, so I hooked the fuel end to the right location on the carb and the line you said is a breather and doesn't go anywhere I hooked up to the other port on the petcock. Is this correct or do I have to buy a petcock with a single outlet on it for this quad? I pulled the quad out today to try to get it going for this season for her but can't get the thing running now...not sure if the way I set the petcock/carb lines up has something to do with it. Thank you
@2strokeguru
4 жыл бұрын
If the petcock has a diaphragm it needs a vacuum the bigger hose is a very text me pics 6033958097 I can tell
@HomeGrownPyro1
4 жыл бұрын
@@2strokeguru I texted 2 pics. Thank you I appreciate your help
@Road_Renner3 жыл бұрын
Do you have an ID on that after-market carb you installed? I keep looking at replacement carbs on Amazon and buyers keep saying after they install the replacement carbs the throttle cable is to short to permit slow-down of the idle speed.
@2strokeguru
3 жыл бұрын
I brought a aftermarket replacement carb not the generic carb that fits multiple Yamaha breeze 125 has a flange style Yamaha breeze and Yamaha grizzly 125 are the same 4wheeler
@buggman2208 ай бұрын
Kevin I replace the carb with a new one and have 2 issue: 1. Have issue starting with it start without help (starting fluid) 2. but once it starts it's idle high like the throttle stuck and I've made adjustment on the idle control screw and it still idle high. What could be the issue. Yamaha 125 breeze
@2strokeguru
8 ай бұрын
Are you in the USA
@950vstar3 жыл бұрын
Hi Kevin what do you set the idle speed to? Do you just turn it all the way to the right and back that one out like one and a half or two turns?
@2strokeguru
3 жыл бұрын
I set mine to where I can put it into gear if the idle is to high it won't go into gear
@raulalbiter10782 жыл бұрын
Hey man I just got one of these 4 weleer but the cvt belt was taken apart I want to know or see how to put it back together
@2strokeguru
2 жыл бұрын
.my 4wheelers are put away for the winter but if you email me pics I can help you handymotorman76@gmail.com
@waynepeters508 Жыл бұрын
Do you have a model and part number for the carb you used by chance? I'm looking to buy one and not seeing the best reviews
@2strokeguru
Жыл бұрын
Unfortunately I don't I brought it on ebay and I brought it for the Yamaha grizzly 125 Yamaha breeze 125 same bike
@waynepeters508
Жыл бұрын
@@2strokeguru ok thank you! I gotta get a carb and now it is not starting I think either the valve rocker arm broke or is so loose the valve isn't opening. Besides these 2 problems it's a well taken care of Breeze! They guy who owned it before didn't know you had to adjust the valves every 6 months so it was ticking and we were going to adjust the valves but u just bought it and son wanted to ride on his last week of vacation and now we are here lol.
@petergreaney13284 жыл бұрын
Did you put a hitch on yours or does it come with it?
@2strokeguru
4 жыл бұрын
I put a hutch on it
@dombravo73305 жыл бұрын
Love your video! I have the same Yamaha breeze and just got the same carb on ebay. Put everything on yesterday and i still cant get her to start. Plug is new, carb is new, air filter is fairly decent, petcock is new. Is there a fuse that could making it not start? It tries to turn over but no luck
@2strokeguru
5 жыл бұрын
6033958097
@2strokeguru
5 жыл бұрын
Thank you call it's easier
@dombravo7330
5 жыл бұрын
I tried calling but i know its a bit early yet. I'll try back later
@The0ffxcialDorianTv
5 жыл бұрын
What could it be?
@2strokeguru
5 жыл бұрын
@@The0ffxcialDorianTv what could what be
@connylarsson93972 жыл бұрын
Hi Kevin! Very nice video, I have the same bike and have a big problem with the carb, I get a lot of fule in the airfilterbox, please do you have any suggestion is wrong? Sincerely Conny
@2strokeguru
2 жыл бұрын
How is the bike running 🏃♂️
@2strokeguru
2 жыл бұрын
All 2stroke engine spit fuel back out but if it is leaking after it was parked that's different
@kellyunderhill87313 жыл бұрын
Who manufactured your new carb? Who did you buy it from i.e. dealer name? Did you buy it online? How can I get this same exact type of carb?
@2strokeguru
3 жыл бұрын
I don't remember the seller I honestly buy 100s of cards for all over i remember it's a cheap Chinese carb from Ebay.com and I don't remember when I did this video but from then till now I am very happy with it the breeze still runs as good as it did when I installed it and the Yamaha grizzly 125 is the sister bike to the Yamaha breeze
@micmic9410 Жыл бұрын
Did that breeze start cold without the air box?
@2strokeguru
Жыл бұрын
Yes but does not like it it runs much better with it on
@donniemurley8812 Жыл бұрын
Hey I'm curious what kinda screws was holding down the breather
@2strokeguru
Жыл бұрын
The air box
@donniemurley8812
Жыл бұрын
Yes what kinds bolts was holding the air box down please would like to see pic of them
@2strokeguru
Жыл бұрын
@@donniemurley8812 I don't have the originals
@donniemurley8812
Жыл бұрын
I kinda figured they wasn't oem so I was curious what you replaced them with
@jimmycotter22073 жыл бұрын
When I did this the bike seemed to rev WAY to high at idle, I checked i had the sleeve aligned right in the carb, and throttle was loosened as well as adjustment on carb. But its as if the throttle cable is too short? Its so weird. Any advice ?
@2strokeguru
3 жыл бұрын
There's a cable adjust at the throttle assembly on the handle bars and most throttle cables have a slack adapter on the cable it self
@jimmycotter2207
3 жыл бұрын
@@2strokeguru but with the old carb it was fine ? Surly if it was a cable issue would it not have revved high with the old carb to ?
@DavidGonzalez-ge9vm
Жыл бұрын
I have the same problem aswell. Did you find out the reason?
@mariovaladez14 жыл бұрын
Do you have the carb# that you ordered. I have the same 4 wheeler and look for the carb
@2strokeguru
4 жыл бұрын
I have the box in storage ask me this weekend
@wolfer1199
2 ай бұрын
@@2strokegurudid you ever figure out the part #? I’d like to order the same one
@caseyvaught69203 жыл бұрын
You are the man watched your video and had my girlfriend play by play to replace mine ! Only problem I have to stay on the throttle to keep it running any suggestions?
@2strokeguru
3 жыл бұрын
thank you raise the idle speed on the side of the carb there is a thumb screw thats is the idle speed
@caseyvaught6920
3 жыл бұрын
Kevin Bergeron I’ll try that . Thank you for replying !
@2strokeguru
3 жыл бұрын
@@caseyvaught6920 welcome
@donniemurley8812 Жыл бұрын
What kinda replacement carb was it
@2strokeguru
Жыл бұрын
Chinese knockoff on eBay
@donniemurley8812
Жыл бұрын
@Kevin Bergeron I got the zoom zoom carburetor from Amazon
@carlzirk5 жыл бұрын
Thanks. I have a carb to put in my Breeze.
@2strokeguru
5 жыл бұрын
Welcome 18 20 dollars on Ebay
@carlzirk
5 жыл бұрын
Thanks I had same problem with fuel leaking. Should the fuel lever point down for on?
@2strokeguru
5 жыл бұрын
@@carlzirk there's a couple different ones mine has on off res what does yours read
@carlzirk
5 жыл бұрын
@@2strokeguru same as yours
@2strokeguru
5 жыл бұрын
@@carlzirk switch to off when not using it
@hudson.v34583 жыл бұрын
9:32 how to put the choke on
@jamesmoscone3643 Жыл бұрын
My kid has the same 🦕
@2strokeguru
Жыл бұрын
Great machine I put lawn and garden tires on so I don't kill the lawn
Пікірлер: 94
The best tutorial video I’ve ever seen. Not too much unnecessary commentary, very explained with what you are doing, and good video angles for all of it. If only every tutorial video could be this good.
@2strokeguru
3 жыл бұрын
Thank you
Great video! You truly are a patient and skilled mechanic.
@2strokeguru
3 жыл бұрын
Thank you I appreciate that
Nice. Glad you made this video because I need to clean my carburetor. This video helps a lot in locating it.
@2strokeguru
5 жыл бұрын
Welcome
Great Video… good detail
@2strokeguru
Жыл бұрын
Thank you
Two big thumbs up!! Well done, thanks for the great in-depth tutorial...especially on the choke and throttle cable. Thank you!!
@2strokeguru
4 ай бұрын
Very welcome
excellent video, i have learn alot the only challange is the cab of the carburator having extra lentgh that cable will be pulling the slider little up, the solution is to put the OEM cap on and problem will be solved
@2strokeguru
3 жыл бұрын
Thank you some of them had taller caps
Good video, can't be a shade tree mechanic without a shade tree kid and a dinosaur.
ive tried getting a new carb, with patience you could get a brand new one, but id suggest just replacing the jets on the old one so you dont have to retune it
Very helpful thank you, I'm having trouble getting the timing sprocket off. It keeps spinning. Do I need an impact wrench? I'm new at turning wrenches, but I'm gonna get this done.
@2strokeguru
4 жыл бұрын
What is wrong with the engine
Great video Kevin
@2strokeguru
5 жыл бұрын
Thank you
It doesn't connect to any thing goes straight back the purpose of the tube is to prevent dirt from going into the carb so it needs to be lower than where it connects to the carb
@roywright94
4 жыл бұрын
What type carburetor is that
@2strokeguru
4 жыл бұрын
@@roywright94 Chinese knockoff of the factory looks original but it is Chinese Yamaha breeze and Yamaha grizzly 125 are the same bike
Hi! If I clean the airfilter and take the fuel away it will start again. The fuel seems to flow through the carb if I do not turn off the tap. Yamaha Breeze, 4-stroke?
On the idle mixture screw. Do you turn it to the left all the way till it stops and then do one and a half turns open?
@2strokeguru
3 жыл бұрын
Yes till it just stops then back out 1.5 turns out then start the engine let warm up and fine tune it
Hi Kevin! I wanted to know if you could message me, I was wondering if I could get some advice about this KE100 im looking at, and whether or not to pass on it.
Hi Kevin- what did you connect that carb top vent tube to?
@Jeezy11
2 жыл бұрын
I’m trying to figure that out too. Have my carb disassembled right now and cleaned it but mine looks cut off idk if it was supposed to be somewhere
Thanks for the vid it was very helpful. Question for you, the petcock was leaking on the breeze I picked up for my daughter so I took the one off an extra tank I had and put it on. Well its a little different I think as it has two tubes coming off it, so I hooked the fuel end to the right location on the carb and the line you said is a breather and doesn't go anywhere I hooked up to the other port on the petcock. Is this correct or do I have to buy a petcock with a single outlet on it for this quad? I pulled the quad out today to try to get it going for this season for her but can't get the thing running now...not sure if the way I set the petcock/carb lines up has something to do with it. Thank you
@2strokeguru
4 жыл бұрын
If the petcock has a diaphragm it needs a vacuum the bigger hose is a very text me pics 6033958097 I can tell
@HomeGrownPyro1
4 жыл бұрын
@@2strokeguru I texted 2 pics. Thank you I appreciate your help
Do you have an ID on that after-market carb you installed? I keep looking at replacement carbs on Amazon and buyers keep saying after they install the replacement carbs the throttle cable is to short to permit slow-down of the idle speed.
@2strokeguru
3 жыл бұрын
I brought a aftermarket replacement carb not the generic carb that fits multiple Yamaha breeze 125 has a flange style Yamaha breeze and Yamaha grizzly 125 are the same 4wheeler
Kevin I replace the carb with a new one and have 2 issue: 1. Have issue starting with it start without help (starting fluid) 2. but once it starts it's idle high like the throttle stuck and I've made adjustment on the idle control screw and it still idle high. What could be the issue. Yamaha 125 breeze
@2strokeguru
8 ай бұрын
Are you in the USA
Hi Kevin what do you set the idle speed to? Do you just turn it all the way to the right and back that one out like one and a half or two turns?
@2strokeguru
3 жыл бұрын
I set mine to where I can put it into gear if the idle is to high it won't go into gear
Hey man I just got one of these 4 weleer but the cvt belt was taken apart I want to know or see how to put it back together
@2strokeguru
2 жыл бұрын
.my 4wheelers are put away for the winter but if you email me pics I can help you handymotorman76@gmail.com
Do you have a model and part number for the carb you used by chance? I'm looking to buy one and not seeing the best reviews
@2strokeguru
Жыл бұрын
Unfortunately I don't I brought it on ebay and I brought it for the Yamaha grizzly 125 Yamaha breeze 125 same bike
@waynepeters508
Жыл бұрын
@@2strokeguru ok thank you! I gotta get a carb and now it is not starting I think either the valve rocker arm broke or is so loose the valve isn't opening. Besides these 2 problems it's a well taken care of Breeze! They guy who owned it before didn't know you had to adjust the valves every 6 months so it was ticking and we were going to adjust the valves but u just bought it and son wanted to ride on his last week of vacation and now we are here lol.
Did you put a hitch on yours or does it come with it?
@2strokeguru
4 жыл бұрын
I put a hutch on it
Love your video! I have the same Yamaha breeze and just got the same carb on ebay. Put everything on yesterday and i still cant get her to start. Plug is new, carb is new, air filter is fairly decent, petcock is new. Is there a fuse that could making it not start? It tries to turn over but no luck
@2strokeguru
5 жыл бұрын
6033958097
@2strokeguru
5 жыл бұрын
Thank you call it's easier
@dombravo7330
5 жыл бұрын
I tried calling but i know its a bit early yet. I'll try back later
@The0ffxcialDorianTv
5 жыл бұрын
What could it be?
@2strokeguru
5 жыл бұрын
@@The0ffxcialDorianTv what could what be
Hi Kevin! Very nice video, I have the same bike and have a big problem with the carb, I get a lot of fule in the airfilterbox, please do you have any suggestion is wrong? Sincerely Conny
@2strokeguru
2 жыл бұрын
How is the bike running 🏃♂️
@2strokeguru
2 жыл бұрын
All 2stroke engine spit fuel back out but if it is leaking after it was parked that's different
Who manufactured your new carb? Who did you buy it from i.e. dealer name? Did you buy it online? How can I get this same exact type of carb?
@2strokeguru
3 жыл бұрын
I don't remember the seller I honestly buy 100s of cards for all over i remember it's a cheap Chinese carb from Ebay.com and I don't remember when I did this video but from then till now I am very happy with it the breeze still runs as good as it did when I installed it and the Yamaha grizzly 125 is the sister bike to the Yamaha breeze
Did that breeze start cold without the air box?
@2strokeguru
Жыл бұрын
Yes but does not like it it runs much better with it on
Hey I'm curious what kinda screws was holding down the breather
@2strokeguru
Жыл бұрын
The air box
@donniemurley8812
Жыл бұрын
Yes what kinds bolts was holding the air box down please would like to see pic of them
@2strokeguru
Жыл бұрын
@@donniemurley8812 I don't have the originals
@donniemurley8812
Жыл бұрын
I kinda figured they wasn't oem so I was curious what you replaced them with
When I did this the bike seemed to rev WAY to high at idle, I checked i had the sleeve aligned right in the carb, and throttle was loosened as well as adjustment on carb. But its as if the throttle cable is too short? Its so weird. Any advice ?
@2strokeguru
3 жыл бұрын
There's a cable adjust at the throttle assembly on the handle bars and most throttle cables have a slack adapter on the cable it self
@jimmycotter2207
3 жыл бұрын
@@2strokeguru but with the old carb it was fine ? Surly if it was a cable issue would it not have revved high with the old carb to ?
@DavidGonzalez-ge9vm
Жыл бұрын
I have the same problem aswell. Did you find out the reason?
Do you have the carb# that you ordered. I have the same 4 wheeler and look for the carb
@2strokeguru
4 жыл бұрын
I have the box in storage ask me this weekend
@wolfer1199
2 ай бұрын
@@2strokegurudid you ever figure out the part #? I’d like to order the same one
You are the man watched your video and had my girlfriend play by play to replace mine ! Only problem I have to stay on the throttle to keep it running any suggestions?
@2strokeguru
3 жыл бұрын
thank you raise the idle speed on the side of the carb there is a thumb screw thats is the idle speed
@caseyvaught6920
3 жыл бұрын
Kevin Bergeron I’ll try that . Thank you for replying !
@2strokeguru
3 жыл бұрын
@@caseyvaught6920 welcome
What kinda replacement carb was it
@2strokeguru
Жыл бұрын
Chinese knockoff on eBay
@donniemurley8812
Жыл бұрын
@Kevin Bergeron I got the zoom zoom carburetor from Amazon
Thanks. I have a carb to put in my Breeze.
@2strokeguru
5 жыл бұрын
Welcome 18 20 dollars on Ebay
@carlzirk
5 жыл бұрын
Thanks I had same problem with fuel leaking. Should the fuel lever point down for on?
@2strokeguru
5 жыл бұрын
@@carlzirk there's a couple different ones mine has on off res what does yours read
@carlzirk
5 жыл бұрын
@@2strokeguru same as yours
@2strokeguru
5 жыл бұрын
@@carlzirk switch to off when not using it
9:32 how to put the choke on
My kid has the same 🦕
@2strokeguru
Жыл бұрын
Great machine I put lawn and garden tires on so I don't kill the lawn
You need a new carburetor
@2strokeguru
28 күн бұрын
Why 4wheeler is still running great