Just ordered the same unit. Should arrive in two days. Thanks for sharing your set-up video.

yeah i got the one with the laser the scanner and of course the 3d printer. unboxed mine today on april 27 2017. can't wait to use it. thanks for the video...it was good.

I shared your video on face book so hopefully you'll get some more HITS. thanks again for the video brother.

That looks like the basement from the first Ghostbusters movie.

Good job

just ordered one should come in a week

I used a piece of glass cut just inside of the 4 brackets. I also use elmers glue stick and apply 5 cross coats of the glue on the glass. Then I use aluminum tape on the sides of the glass to hold the glass in place. When you do this if you do..you are going to have to reset your Z offset and use a business card for your clearance of the nozzle to the glass plate. I adjusted mine to where the card slides smoothly under the nozzle with just a tad of a grab by the nozzle. Then when the print is done i remove the glass and let it sit for about 10 minutes...the part should pull off easy. then i rinse my glass plate and re do the process when i want to print something else.

@axlslak

5 жыл бұрын

The glue sticks are awful as adhesive. Try hairspray. Much easier to both apply and clean.

@clarenceney7266

5 жыл бұрын

John Stratairious what type power supplies?

Could you tell how do I fix the touch panel is not on issue?

i just got one the other day do you use wifi or the usb drive

is this a good printer for a begginer?

@neilyboy

5 жыл бұрын

Yeah. With its leveling features and filament options I think it's a great starter myself.

Did you provide product presentation or product demo on the site?

@neilyboy

5 жыл бұрын

No I have no affiliation with xyz

@M3LLYM3L69

5 жыл бұрын

can anyone help me .... so purchase this same printer and i go and turn it on and the LED lights flashes and and the motor rides to the back of the wall and does this scraping sound .im just a beginner lol

@neilyboy

5 жыл бұрын

@@M3LLYM3L69 any error number on screen? Where is the scraping noise coming from?

@M3LLYM3L69

5 жыл бұрын

@@neilyboy no nothing on the screen ....the axis is going all the way to the back and the LED lights does not turn on just a quick flash

@neilyboy

5 жыл бұрын

@@M3LLYM3L69 interesting. You don't happen to see any loose wires anywhere do you? It sounds like a hardware fault of some kind to me. You just unboxed this? Davinci has good support. Where did you purchase?

Is this still a good 3d printer in 2022?

@neilhagan5566

2 жыл бұрын

If you are able to scoop one up for cheap then yeah actually.. throw a few bucks at it (if you have some free time) and it's a very capable machine. That said you can snag an ender 3 for 99 bucks every now and then... It's honestly all relative to your location and what's available and what you want to put into it. Since this video I dumped 40 bucks into a direct drive end on an xvixo x3s and that I picked up for 60 bucks and it prints like a dream.. reviews on 3d printers are honestly a joke anymore... Years ago if you wanted out of the box ease of use these were about all you had... I believe Anker (the electronics go to on Amazon) has a Kickstarter for a printer that looks promising. Throw money towards it if your not in a hurry. To me that looks promising... 3d printing can be a headache if you are just starting out. That said once you have owned a few machines it's not uncommon to start a print on a machine leave for work and come home to a decent print now-a-days.. if you ask me my opinion anymore (I've owned over 30 printers in the past few years)... I have found that the ones you tinker with the most will always be your go to... I have built a couple hypercube based printers that I really loved.. I had a lot of time in them... I spent 60 bucks on your basic ender3 clone and put a different hot end on it and had excellent results... This reply probably does not help much but what I'm getting at is if you put some time into this guy yeah it's a very capable printer... Maybe snag one of these used and throw in a different board and your set....

@tonysanderson7741

2 жыл бұрын

@@neilhagan5566 Thanks for the reply