Great Video, Thanks, got the D7 so going to try myself. You clearly stated unboxing in beginning so exactly what you’d go through. Not pre planed cutting out all the real thought process you actually go through, so while yes a bit slow but very helpful.

@Coalcoman925

Жыл бұрын

Thanks

Thanks for video. Would like to see more cars done key programming with d7 :) Gonna buy it myself, have xtool a30m now :)

@Coalcoman925

Жыл бұрын

Will do. Subscribe for new videos

Good video Aristeo. Gracia my friend.

@Coalcoman925

Жыл бұрын

You're welcome. Please subscribe 🙏

What machine did you cut the key with?

WOW!

I have that machine but never tried .Tomorrow, i will thanks

@Coalcoman925

3 ай бұрын

It's a good key programmer

are these keys cheap ones that you can get on ebay? or are they pre programmed genuine ones? aka do these keys need the chips programming before or just this step with x tool? thanks!

@Coalcoman925

11 ай бұрын

Yea. I bought them on ebay for around 25 dollars. You need to cut the key and program them with your xtool

Good Job

Hows the machine doing also did you need any adapters to make it work with a smart car?

@Coalcoman925

7 ай бұрын

Its been flawless when it comes to key programming. No i didn't need any adapters for the smart. You will see lights flickering thats normal don't get scared and stop the process

@user-tl5mc3bt3e

7 ай бұрын

Any other special features that worked well?

@Coalcoman925

7 ай бұрын

@user-tl5mc3bt3e it has a lot but i haven't been messing with them. The only down side of this machine is you get 3 years of free updates and after that you need to pay yearly i believe

Did you do a video of you cutting the key?

@Coalcoman925

9 ай бұрын

Yes it's on the channel

Can the xtool d7 or d8 remove Audi component protection?

@Coalcoman925

Жыл бұрын

I haven't tried doing that. Not sure.

Do you need to pay a subscription to use the XTOOL D7? Is there any requirements Or can anyone buy it and just use it? Cheers mate great video you gained a sub 👌

@Coalcoman925

10 ай бұрын

When you buy it they give you 3 years free subscription but after that you will have to pay

Do you need original key in order to program a new one?

@Coalcoman925

Жыл бұрын

Yes thats how I did it. Maybe you can do it by using the all keys lost option. I'm not sure.

@crystrezerex2life

Жыл бұрын

@@Coalcoman925 thnx

@stephenmaas8775

11 ай бұрын

Hi thanks for uploading video, Is there an all keys lost function/option? I seen on a comment on Schrodingers Box channel that a guy helped an elderly naibour with a lost key fob and saved them a fortune. that brought me to your channel searching👍 I cant think how it would be possible with a locked car and a lost key fob how he could possibly use. I assume the car would be locked? And if not possible with a locked car how would it be possible with an unlocked car but no key fobs?

How come your xtool D7 only has 7 icons on the bottom of the screen where others have 9 ?

@Coalcoman925

Жыл бұрын

Maybe thats how the new version are! Not really sure. Didn't really pay attention to that. Thanks for bringing that up.

@Coalcoman925

Жыл бұрын

I think if it would be fake I couldn't register the unit. It's registered and I have 3 years of free updates. But it worked to program key fobs with no problem so I'm assuming it's legit.

@Coalcoman925

Жыл бұрын

I contacted the dealer and they said the newer versions are like that. They come in black cases too instead of red.

Work on 2023 Ford F150?

@Coalcoman925

Жыл бұрын

Most likely it should. You might ask the dealer before you buy it.

maybe - I hope it's not a fake, I heard they are out there.- best to call the company and find out

How do i charge my x-tool d7 when the battery is low

@Coalcoman925

5 ай бұрын

It comes with a charger to charge it

You need wifi and update it to newer version firmware

@sluml0rd67

Жыл бұрын

i just got mine and updated but mine looked different then this one.. had 102 updates

This video was very hard to keep up with. All the mumbling was very frustrating. The failure to read the instructions made this video unnecessarily long and convoluted. In the end it was good because it showed the device works. I appreciate the video and the work you put into it but it would be better with a little better planning. You are awesome though.

@loosethehounds

5 ай бұрын

Rude much

@fredericocorrea9814

5 ай бұрын

@@loosethehounds if no one ever gave me advice or told me the truth about my work i would never improve. If being honest hurts your feelings I'm sorry but if you come up from it, congratulations. If not, it's on you. If you can't accept a critique how do you know what to improve. Be blessed.

@SaadAli-tg9hl

5 ай бұрын

Does the x tool d7 come with a low battery or it's a fault cause mine is refusing to charge

Hopefully i dont mess up the car 😂

@Coalcoman925

Жыл бұрын

I know right...! I was thinking the same thing when I was doing it. Lol

@OLIVER949OC2

Жыл бұрын

@@Coalcoman925 I'm doing it carefully watching alot of tutorials before I try it

@Coalcoman925

Жыл бұрын

@@OLIVER949OC2 just so you know the dashboard of your car will be making some noises and lights will be flickering. Thats normal

@OLIVER949OC2

Жыл бұрын

@@Coalcoman925 I think my car is having issues with the key proximity slot reader it's not detecting a key the current key turns on the car but if my battery dies on my keys I won't be able stick the fob in the key slot reader I have keyless smart key ... might have look at why the reader light is not on when I stick the fob jn maybe a fuse or maybe I need to replace something

@Coalcoman925

Жыл бұрын

@@OLIVER949OC2 could be. Yea well do some research and go from there. Subscribe

Please learn how to use the tool BEFORE trying to show everyone how to use it !

@Coalcoman925

8 ай бұрын

Whats the fun in that! Lol i go as I'm learning. If i mess up o well lol. God bless

back when he said "If it works we all watching, if it didn't oh well" Me: it is too intense. I'll close my eyes. 🤣😂🤣😂 🏌‍♂️🎆 I followed along on a D7 up until the scanning began. Just to see if the D7 has that car. 🥴😂🤣😂🤦🏾🏌‍♂️🎆

@Coalcoman925

Жыл бұрын

Lol. Everything worked as plan. The car starts to make all this kind of noises and lights turning off and on but it works. Thank God. 😂

@feyrrari

7 ай бұрын

Nice.🏌‍♂️🎆

What machine did you cut the key with?

@Coalcoman925

4 ай бұрын

I have a video on that too. Check it out