XTool D7 BIDIRECTIONAL Scan Tool Under $400!!
Автокөліктер мен көлік құралдары
www.amazon.com/dp/B098LF38DS
FOR CANADA---- www.amazon.ca/dp/B0BZPLTHR3 Code: 08D7SBOX
Review of the Xtool D7- A Fully functional Bidirectional OBD-II and CAN compatible Scan Tool for under $400.
A couple notes not shown in the video:
-The device does have graphing function. Most of you know this is a major consideration for me. You are able to combine data onto graphs and adjust scales etc.
-The subscription fee is free for the first 3 years and then just $99/yr after. Subscription allows you to add new vehicle model years and new features through software updates. If you do not pay the subscription fee then your unit is still functional, it's just "stuck in time" with whatever capabilities it has at the time subscription expires.
- There are other models available with even more features. Check the lkink above for more info.
Пікірлер: 426
Matt, I will be a fan of your channel for life....Please continue doing what you do, exactly the way you do it !
@SchrodingersBox
Жыл бұрын
Thanks! Will do!
I saw the XTool D7 demonstrated on another KZread Channel, and like yourself, the host gave rave comments. I liked the features and capabilities, but it was the bi-directional testing, and remote control, capabilities that sold me. I jumped, no regrets. Well, one regret. Up here in Snow Country all of my toys are put away until Car Season, usually min-April. So, I haven't had a chance to play with the D7 yet, other than taking it out of the case. But, soon, very soon I will be breaking the pony cars out and on the newer cars I will begin to play (1997 Honda Del Sol SI, and 2020 Shelby GT500). There is not a thing wrong with the ODB2 capable cars, to include our daily driven SUVs. But, if nothing else I want to begin getting familiar with this tool - just because. Thank you for an excellent review.
Thank you. It seemed like I would be spending all day trying to figure out which scan tool would be my first. After seeing your video I knew this one will be it. It's on the way here now, and I am on the way to your channel to watch more of your videos.
I've got one if this some month ago and have to say their customer service is exceptional. I connected to a Mercedes E350 and you know how picky are European car with generic scanners. In my case I couldn't see the ABS module. I contacted them and within a week they developed an updated file that allowed me to successfully see live data on the ABS module. They even asked me for a follow up days later to make sure that worked!!
@SchrodingersBox
Жыл бұрын
yes that is why I mentioned about how they followed up with me after a year when I denied them at first. just the fact they tracked that was impressive that they pay attention!
This is so cool, I had actually got this scan tool on black Friday of last year (2022). I'm just now learning how to use it or finding the time to. I actually came across this video when you first put on youtube. Also, I thought it was neat how out of all them scanners this is what I picked and I got it for a little over 300 new. Thank you brother, I have learned a lot from your videos!
@SchrodingersBox
Жыл бұрын
great to know!! Yes you will definitely learn how to get the most of your scantool on this channel!!
I own a D8. I keep learning what it can do for me. Thanks.
I bought a D7 a few months ago because I was looking for a reasonably priced replacement for my old Snap-on brick. WOW! It's incredible. Still learning all the functions.
@SchrodingersBox
Жыл бұрын
Great to hear!
@jum5238
Жыл бұрын
I still have my Snap-on brick! Haven't used it in a while, as I don't drive my older suburban much anymore, but it had some bidirectional control that none of my readers had. (I actually stopped buying the readers and bought a cheap $6 program for my phone, and a OBD bluetooth setup and did pretty well with that. I've also purchased a BlueDriver setup which I've used recently to track down some airbag related stuff. But I keep itching to get a bidirectional unit for my newer cars.
@randy1ization
11 ай бұрын
want to sell your brick? I want it for the oscilliscope.
WOW!!!!! all that for less than $400 with 3 years of free updates. I am going to buy one to keep in my truck with me at all times. Xtool is going to sell a boat load of them. Thanks Matt
@SchrodingersBox
Жыл бұрын
Exactly! I have a scantool in each of my vehicles now so I always have one available if I driving around and can help someone out!!
Back again from your fuel trim diag videos!! I'm in the market for a proper, pro level scantool and trying to research them all is pretty effing overwhelming...but when I saw ur review and given my implicit trust in your opinion/integrity in these matters, well, let's just say I need not research anymore...I'm sold...thanks man!
Great review from a very trustworthy source, I'm going to buy either the A30m or D7. Thanks for the continued great videos. 🙏
@SchrodingersBox
Жыл бұрын
Thanks for watching!
I bought one some months ago bc no one wanted to work on my Promaster and heard dealership was $$$$$ & nightmare. Contacted seller of Ram PM as to why he was selling so cheap, "270 mi on used 2018 and dlrshp told me to come get it, that they couldn't fix it!" I got mine running and showing no codes. Not finished putting it all back together. In driveway In Wis, doesn't help. Bought '08 Highlander to replace PM for my winter trip(s) south. It statrted acting up but I got it running again using the D-7 Xtool and I couldn't be happier. Just the Highlander fix mor than paid for the Xtool !! Bless you Matt !!! I want to learn more !! Wish my daughter was still in Aurora so I could come sweep your floors or something Matt !
@tubetime39
5 ай бұрын
PS I've messed with cars since late 60's, worked as helper in garages ( city squad cars at one point before trucking) and finally I am forced to learn electronics bc of lemon Ram But now I am happy about it and finding Matt is huge !! Maybe I can learn enough to get out of driving semi !
My d7 just arrived a couple days ago and now watching this review sounds like i may bought a good tool...lol... great review btw..thx.
@SchrodingersBox
Жыл бұрын
Enjoy it! you made a good decision.
Well Matt, you sold me. Just ordered from your link in the description. Hopefully you make a few bucks from the sale. Well deserved.
@SchrodingersBox
Жыл бұрын
you will absolutely enjoy it!!!
You are the MAN Matt, thank you again for another great video.
@SchrodingersBox
Жыл бұрын
Thank you! More coming soon.
I’m just your basic diyer with decent mechanical aptitude. I’m now retired and certainly can’t afford to take my vehicles anywhere to have repairs done. Currently I have a BlueDriver but desperately need to upgrade to a serious scan tool. I’m going to buy this one strictly based on your review as I respect you as a mechanic. Appreciate your videos!
@SchrodingersBox
Жыл бұрын
Good choice!!! I use it all the time.
@Mgconstruction419
9 ай бұрын
Hey I gotta question, if you did end up purchasing this one.. compared to the blue driver , what are your thoughts.? If anyone can help, would greatly appreciate. 👍
I’ve been following this guys channel for a long time. I very rarely post comments but the amount of valuable information he gives is incredible! Thank you for sharing!! Keep these videos coming
@SchrodingersBox
Жыл бұрын
Thanks for sharing! I will definitely keep posting!!
Great Video as always! I just ordered one. I've been wanting to update my scan tool for a while now.
@SchrodingersBox
Жыл бұрын
Very good choice. If your previous one was not bidirectional you will have a whole new world open to you now!!
I've had a D7 for over a year now, and although I'm pretty sure I paid more for it than $400, it's generally been well worth it. Not all sunshine and roses, but more good than bad by far. I own a 2004 Chevy Trailblazer 2WD, and initially, it was awesome for that, but somehow after a software update, it decided that Chevrolet no longer made a 2WD version of the Trailblazer for the 2004 model year, and I contacted support about it, but I've never gotten any resolution to that, that I'm aware of - I haven't checked recently because I've been immersed in dealing with several other family members cars, for which it has been very useful (except for my wife's brand new Hyundai Sonata Hybrid, which isn't recognized yet). The best answer I've gotten from support on the missing 2004 Chevy Trailblazer RWD, was to "buy the D8", but their website manual doesn't list the RWD version as a supported model either. When my subscription runs out, I'm more likely to just buy another one, rather than renew, because I expect to have well worn this one by then...
@educationaltvshows9950
5 ай бұрын
D7 is not subscription based afaik. Just update stop. You can use it full functionality years, years for free.. If someone has opposite knowledge - inform us here.
That's a really cool tool! Thanks for sharing it.
I got a D9 pro last year to go along with my 14.4 Modis.... The D9 pro BT (Bluetooth) is very similar to the D7 software wise, it was hard to make a choice but I liked how I can be in the house getting dinner started, while I keep an eye on engine temperature etc with the Bluetooth. I also like that I don't have to sit in the car to actuate stuff, especially if the interior is real nasty 😂 I've plugged it into quite a few vehicles.The Xtool is good value and I'm basically happy with it but found it slow to bring up VIN screen on vehicles that don't self identify 😴 I've also had topology not recognize modules that I know are there and offer to turn off only 4 injectors on a V6 Caravan, so if something seems missing consider that. It does do a lot of tests and it's helped saved the day to help rule in/out issues. I would buy again and they do tons of updates.
@SchrodingersBox
Жыл бұрын
You did a much better review than I did lol!!!!
@iam1smiley1
Жыл бұрын
@@SchrodingersBox thanks, I forgot to ask how you got your scanner to hook up to your computer? Did you need to download something? I could see this being fun to play a joke on the old man 😏 One thing I do find somewhat concerning these days is how hacker's could attack the scan tools themselves and get them too shut down vehicles, or do other "strange stuff" with this type of connectivity 🤔
@SchrodingersBox
Жыл бұрын
The software is already on the tool. You also can’t control any bidirectional functions that affect vehicle safety on ANY scantool while it’s driving. For example if car is not in park you cannot increase rpm.
Powerful tool! I own a D7. I wish there was a way for a novice DIY like myself to learn its powerful capabilities. Currently, you have a to be mechanic to understand what function to use to diagnose a problem.
@SchrodingersBox
9 ай бұрын
That’s what this whole channel is about! I show how to interpret functions and I am not a mechanic!!
I own an Xtool D7 and D8 they are both very capable bi directional scan tools. Amazing how low the price is for the technology. Nice review Matt!
@polymetric2614
Жыл бұрын
what does the d8 have that the d7 doesn't?
@ozzstars_cars
Жыл бұрын
@polymetric for starters the D8 I own has a Bluetooth dongle, which is much more convenient working under the hood and reading data. I find my Autel MS906BT and MS908SP with a J2534 box to be much more intuitive.
@TroyStevensStelzerPaintingInc
Жыл бұрын
@@polymetric2614 D8 does relearns, whereas D7 does not.
@zxcdarel
Жыл бұрын
sir what will happen if you didnt renew your software license in both of your xtool?
@TroyStevensStelzerPaintingInc
Жыл бұрын
@@zxcdarel The first 3 years are free updates. After that, it would still continue to work as it always did before. It just wouldn't have any new content added.
Glad to see you advertising scanners now...
Hey Matt. Greetings from Ontario. I've owned a D7 for a little while now and with every new update, that tool just gets better and better. I've had fantastic customer support with xtool as well. I also have the A30m. It works pretty good for the price too.
@SchrodingersBox
Жыл бұрын
Thanks for the info!
@randy1ization
11 ай бұрын
do they have a US phone number for support?
@donniev8181
6 ай бұрын
@SchrodingersBox thanks for reviewing this product, I've had my eye on it for at least 6 months now. Do you know if the bidirectional testing works on 2024 model vehicles?
@donniev8181
6 ай бұрын
@@randy1izationthey have great support, it's built into the scanner plus you can call them anytime
@SchrodingersBox
6 ай бұрын
I would contact their tech support. I don’t know if they have the 2024 update yet.
I have the D7 and have been very happy with the unit. The only thing I wish xtool would improve is the graphing feature. The live data scaling is auto ranging and can not be manually set. Moreover, although you can zoom in 3 levels on the x and y axis, it won't zoom in low enough to look at say oxygen voltage range of 0-1 V. In playback mode it generally scales much better but is a pain to switch modes. Wish they would add manual scaling capability. In the report tab, there is a data view button that is a mystery to me as can find no info on the functionality. It's been a great unit for capabilities and value. Nice review and learned something new with the remote feature. Cheers!
@polymetric2614
Жыл бұрын
Might not hurt to contact them and suggest that. It might be a small enough operation that they'd actually see it, especially given it's a semi-professional tool where feedback actually needs to be heard
@SchrodingersBox
Жыл бұрын
I did not show the graphing but yes I agree. it’s also my complaint on the Autel as well. and merging more than 2 PIDs is virtually useless. for me, graphing is a major major consideration and I do wish more manufacturers paid more attention to it.
great video also i bought a blank key fob on ebay the stealership wanted 90 to program it. bought this tool and programed the key fob in 2 minutes time. already a 3rd of the way to paying for it.
@SchrodingersBox
9 ай бұрын
Exactly!! Yes you can pretty much make a career just making extra keys with this thing!!!
the xtool a30m is a blue tooth dongle version of the d7 (it might be missing a few special functions and remote control im not for sure) and cuts cost down too $175 because you have to use your own phone/tablet,the only complaint i have is the live data graphing kinda slow but that might just be my phone being slow, and unable to graph multiple items but its the best bang for the buck still
I want one! I could play with that for weeks.
@SchrodingersBox
Жыл бұрын
Totally!!! The first time I ever got a scan took 10 years ago I was hooked for good. In fact it led to this whole channel. I was mesmerized being able to just see data from a cars computer even when I had no idea what any of it was lol
I have the d8. Great tool. It's done everything well so far. I went with the d8 because at the time it was advertised as being CAN FD compatible. I don't know if the d7 is. Both can do alot for the advanced diy mechanic. Xtool accidentally added topology on a previous d8 update so that's awesome 👍From what I hear it's only available on the higher end models. It's not supposed to be on the d8 so don't expect to have it if you buy a new one
@SchrodingersBox
Жыл бұрын
Good to know!
@polymetric2614
Жыл бұрын
what's topology?
@MarcBchannel
Жыл бұрын
@polymetric2614 it's just a feature that displays all the modules the vehicle has when you do a complete vehicle scan. Kind of a visual aid that displays all the modules and network. It shows the network layout, scan progress, and if there are any modules not communicating or with faults. Nice feature to have but you don't have to have it.
@volvo09
Жыл бұрын
That's cool, but unfortunate that you can't update it. I always had a feeling these scan tools were software limited.
@abdul-kabiralegbe5660
Жыл бұрын
I sure hope subsequent D8 owners have the topology update, otherwise the D7 is looking like better value for money.
Wow, I'm going to have to buy one of those damn things!
Thanks again Matt for a great video. I purchased the D7 on Black Friday. I’ve been watching your channel a long time. It would be nice to see more diagnostics using this tool. Thanks
@SchrodingersBox
Жыл бұрын
I will definitely use it in the next several videos and hopefully show more features.
@tomryan9616
Жыл бұрын
Hi again Matt. I’m trying to do a cylinder air fuel ratio test on my 2018 Honda Pilot. The d7 has the function but I guess I’m doing something wrong. The newt gdi engines use this test to check the fuel injectors. This would be a good topic for your channel.
Thanks man,...You rock!
Outstanding presentation, and I sensed that your validation was absolutely amazing. Can you check and see if the GM 2017 SS (American version of the Australian Holden) is covered with this D7. I have looked at so many reviews and comments, and very glad I ran across yours! I subscribed and also really look forward to checking out your other presentations!
@SchrodingersBox
Жыл бұрын
Thanks for the comment. The SS did show on my list of vehicles.
@hsavage3350
Жыл бұрын
@@SchrodingersBox Thank you for the timely reply. I look forward to perusing the remainder of your channel. You did a great presentation. Thanks!
I called it 2 years ago and some people didn't like it: Cheap full functionality scanners are coming! A scanner's hardware is run of the mill and off the shelf. Software is the only thing that matters and it's not hard to reverse engineer what others already did.
@XxbethebestxX
Жыл бұрын
Think I remember you calling that
Thank you for the review It is a good deal
@SchrodingersBox
Жыл бұрын
It really is!
Nice recon ! Thanks !!
I have 1 of these-works decent, its bat charges when plugged into to vehicle too. only thing is slow to display real time data especially if i scroll down-up.
@SchrodingersBox
8 ай бұрын
yes I agree the refresh rate is a little slow. I always try to narrow down to only relevant PIDs to speed it up. good summary!!
Matt THANKS for this vid im resrchng/learning about these BiDir scantools now i want/need one your vid is the best on this xtool (carecare nut and others DONT show the tool just say buy it) I ordered a D7S & played w it seemed to do a TON for my 1997 GM (noticed here for u as well w GMC) but did nothing for an 01 Honda so i returned it... Matt what other Amazon/lower price range scanners are good to get... Autel ? Foxwell ? Thanks
@SchrodingersBox
3 ай бұрын
Hmmm weird it didn’t work on your Honda because I recently used mine on a Honda with no issues. it easily gave over 60 PIDs.
Will this scan tool provide system headlight malfunction codes in a 2020 Toyota Camry? I believe these codes are Toyota specific warning ⚠️ codes
I’m very interested sir. Can it do EPS calibration on a Hyundai?
I have the 800bt it look like a very capable scan tool
Made my purchase thank you
@SchrodingersBox
Жыл бұрын
Great decision!!! I use mine EVERY weekend!!
My xtool d8 is coming in today... Excited..oh its bt as well...
@SchrodingersBox
Жыл бұрын
Good choice- better than the model I have!! I believe the D8 might also do key programming
@rockynix7731
Жыл бұрын
@@SchrodingersBox it does do key programming and it has topology mapping as well..
I have Anyscan a30m tool from them, great tool.
Considering the D7. Appreciated your video. Trying to find information on how the tool would be serviced. According to xToolUSA, you buy from China and deal with them. Reviews have been favorable, but no one has commented on the process of dealing with China other than a few negative comments w/o resolution. Anyone worked with China?
Great review. Can this scanner clear history codes as well as active codes. I have a Silverado that is displaying Steering Assist Reduced that seems to be stuck as a history code and I cannot get rid of it. Also can you adjust steering angle with it? Thanks.
@SchrodingersBox
Жыл бұрын
Yes on the steering angle IF the car permits it. Keep in mind some do not like on most GM- you cannot override steering angle. If it’s off then the sensor is bad or misaligned. Yes on the history codes. I find them cleared when I clean sweep the PCM.
I bought one of these new Xtool D7 scanners and it would not even recognize/connect to my 2020 Mazda 3 car! I took it back and bought an Autel MK808s which connected great and is way better is every way!
@SchrodingersBox
Жыл бұрын
Hmmm. did you contact their customer service about that? what did they say?
@tangleass
Жыл бұрын
Cool story bro
@educationaltvshows9950
5 ай бұрын
Autel too expensive to run. Or is it usable without yearly payment?
Your a good teacher
@SchrodingersBox
10 ай бұрын
thank you!!
I am having difficulties with Ford powetstroke and Chevy duramax, Customer support has not gotten back it's been 3 Days! They don't answer phone calls, can anyone suggest or some insight if it does the midsized pickups diesal? Any help thanks!
Can a TCCM relearn be done with a xtool d7
Very interesting. I am curious about the EEPROM functions and if the tool allows you to dump the memory of controllers, to save it and then restore it to a new module (like Forscan does for Ford), or even allow you to change memory. Thank you for the review.
@SchrodingersBox
Жыл бұрын
Good question! I am not sure if this model can do that but I’ll give it a try!!
@calholli
Жыл бұрын
The D8 is supposed to be EEprom capable, but I'm not sure about the D7.
Let's see you do a video on this computer on a Chrysler product 2018 and newer with a security gateway module !
Ya can also program keys get key codes I believe I have d8 and it does and also has tpms functions
@SchrodingersBox
Жыл бұрын
Yes you can!!!
hello Matt.keep up the amazing videos .always love watching them.have you by any chance used the D9pro?and if so ,what is your feed back on them please??????
@SchrodingersBox
Жыл бұрын
No this is my only experience with XTOOL ever. But hopefully not the last!!
@abuhamzahalmasry5627
Жыл бұрын
@@SchrodingersBox indeed big guy
Wow, if I didn't already own the D7, your video would make me want to buy one BUT after my experience with it, about the only thing I was able to use if for on my 2007 FJ Cruiser was programing a key. Yes, it gave me some readings that were of some help, like transmission temperature but my codes are inconsistent and lights are still on on the dash. It runs fine but I'm always worried driving it. The manufacturer of the D7 has not been helpful AND I would not buy it today based on my experiences with the product or lack of customer service. I've also been to 5 different mechanics, none of them fixed it....that's why I bought the thing in the first place, thinking maybe I could find something. Yet, it appears I'm not any smarter than the 5 mechanics who didn't fix the problem. They all just loaded the parts cannon but didn't fix anything. Even had one dummy that replaced the brake light switch because he claimed that would fix the dash lights. And my wife wonders why I want a pre-computerized vehicle!
@SchrodingersBox
Жыл бұрын
sorry to hear your experience. it definitely wasn’t my experience using the tool- at least, so far. I can tell you that all of my DIY level scan tools each have some level of apparent incompatibility with various cars and that’s why I have so many. I requested a tech person from XTOOL scan these comments and give some feedback.
@alandust2188
Жыл бұрын
@@SchrodingersBox Great...Thanks!
Just curious do you have to something plug into obd connector while in the remote function i see when your holding the scan tool it has a hard wire for obd connector.
@SchrodingersBox
Жыл бұрын
yes this scantool is not wireless to the car but of course it is wireless for the remote function from a computer.
Matt, can this tool help me program a used computer for my 2014 Expedition? Thanks!
When are you going to do a review of the updated xtool d7s. It is updated of the xtool d7. Almost a xtool d8.Which cost double the tool d7s. Thanks for the review.
@SchrodingersBox
5 ай бұрын
I may do that however I just reviewed the TopDon premium scan tool and the VDIAG circuit tool so i need the waves to settle before doing any more reviews.
Just watched another video about the d7. ABS light was on but showed no codes in the module according to this scanner. It DID show no activity on the right front wheel sensor in live data though. Switched to a different scanner and it DID SHOW the appropriate code for it. ????? Thoughts?
@SchrodingersBox
Жыл бұрын
Yes I deal with this alllllllll the time and many of my videos show as much. It’s a communication thing where different scan tools seem to give different data. It’s just something I live with as a DIY with lower end scanners
@steveedwards1072
Жыл бұрын
@@SchrodingersBox thank you for the reply.
Hey, I came across your diagnosing video from years ago with just a text light in hopes to bring me up to speed with my “crank, no start” issue on a 2006 Lexus GS 300. What makes this diagnosing process difficult for me is that these motors were direct injected and had problems; especially the 2006, with it being the last of the 3.0L flagship for Lexus. I’ve been up to my neck with trying to chase the issue. If you are willing to help or share some of your knowledge I can give you the run down of what I have done so far and where I’m at, as far as diagnosing/ repairing / replacing goes. Thank you in advance for your time.
@SchrodingersBox
Жыл бұрын
I have a direct injection video on my website at www.schrodingersboxQM.com. Actually two of them- a overview of DI and also a case study on a vehicle with DI.
Awesome review. Wondering though if bidirectional functions are possible on all obd2 cars or only a certain level/model year of cars. For instance I have a 2007 bmw, will bi direct work on that unit? Thanks!
@SchrodingersBox
Жыл бұрын
Yeah good question. So on ANY scantool- whether an entry level like this or a $30000 snap on Zeus, the bidirectional functions are dictated by the car itself as well as the scantool. You will find on some cars you can control just about every single thing on the vehicle. On other cars you may find you have no bidirectional controls. Again- it’s not so much the scantool as the vehicle. Also remember to have bidirectional control, there has to be computer control of the circuit. So in other words if your horn circuit is simply a relay that powers 12V to the horns- you can’t control that- any more than you could have the tool roll up a manual window. But if the horn is through the BCM, then most likely you can control it but again not all cars may allow that and not all scantools may allow it.
@mrfrenzy.
Жыл бұрын
Even if the car has bidirectional control there is no guarantee every bidirectional tool has implemented it for that particular model. Some tools will be perfect on GM but have poor coverage on European or Asian cars. The only way to know is if the manufacturer has a model list or actually look in the menus under that model.
Great review
@SchrodingersBox
Жыл бұрын
This was one of the most amazing devices I have ever used. it absolutely worked. I have wanted a thermal camera but always thought I would have to spend $1000 for something that would work for diagnostics. this thing worked amazingly well at a third that cost.
u channel amazing interesting gooood language ( clearly) professional
@SchrodingersBox
Жыл бұрын
Glad you think so!
Thanks for this video. I did a lot of research on buying a bi directional scan tool. Up until this point all I ever had was a basic code reader that only showed some live data from the ECU, and did basic functions like clear check engine light codes. As my diagnostic ability has grown over the years, I was in a really tough spot to take certain things to a shop to have things done I know could have been done myself with the right scan tool. After doing months of research across different tool manufacturers I ultimately decided to go with XTool. At first I was skeptical, most people who use bi directional scan tools are usually using Autel, or Launch. Top Don was another one shops seem to be using as well. Obviously getting a scan tool from Snap On was out of the scope of my budget. XTool seems to be the best value for the money. I seriously considered the XTool D7. I ultimately decided to go with the XTool A30M. Things that drove my decision was tool functionality. The A30M is cheaper, the software if used on a Android tablet or phone looks, and functions the same as the D7 minus a few special functions that in my mind 99% of Di-yrs will never use. The best part about the A30M is lifetime free updates. This is one of the biggest draw backs when trying to find a bi directional scan tool. Paying money to keep the tool updated for a DIY person does make a whole lot of sense. I know the argument is not updating, but I have herd, and seen some tool manufacturers that will limit functionality of the tool if the updates are not done. There is a lot of companies out there making scan tools these days, and it is difficult to figure out what tool will be appropriate for a advanced DIY'r. I can say that XTool is a solid choice across the board. They have excellent customer service, and they offer a whole line up of tools that can fit any need even for professional shops. The D7 is no exception.
@SchrodingersBox
Жыл бұрын
great overview, thanks!!
@ronaldshank736
Жыл бұрын
I just ordered that for the same reasons, looking forward to delivery day!
@ron-hb3og
8 ай бұрын
I just brought one yesterday. Can't wait 😂
Will the D7 reset fuel composition on a 2012 chevy silverado? I do not run ethanol and it is showing Alcohol content at 72% percent on my truck.
@thewelder9492
Жыл бұрын
Yes it will. I just purchased one and I reset the fuel composition on my 2013 suburban.
@jamesc9975
Жыл бұрын
@@thewelder9492 I found a video that reset fuel comp so I ordered it. reset mine. put gas in and drove and it reset to 20 percent.fuel trims were +10 at 3 percent so I changed the map sensor. fuel trims went to 0 to + or -2 percent. So its fixed now and I have a bidirectional scanner. I'm amazed at all the features.
Hey Matt. About to take my D7 out of the box finally to check some fuel delivery issues on my wife's car. Very excited. Do you have any updates? Any new tricks you've learned for it? Any shortcomings you've uncovered? It'd be hard to complain given the price, but I was just curious if you had anything to add. Thanks again for doing what you do and how you do it. You are appreciated man.
@SchrodingersBox
Жыл бұрын
No I use it all the time and it has only ever given me a communication issue on a 2017 Nissan. Otherwise it’s been perfect.
@TroyStevensStelzerPaintingInc
Жыл бұрын
@@SchrodingersBox Used it for a few hrs today and I love it. Took a while trying to figure out how to actuate everything, but that's just first date jitters. Overall, I'm very impressed with its capabilities.
I've had the D7 for some years now and I can confirm this tool is a great asset for any DIY who is willing to learn. The free three year updates was a great selling point for me too. You did a nice job with the review and keeping the video at 15:00. That's a hard thing to do. The only bad thing is, your going to get a thousand questions asking: Does this work for (insert a specific vehicle here) ?
@SchrodingersBox
Жыл бұрын
Couldn't agree more! and I expected the questions on compatibility - that’s what the Amazon link is for lol. I already have it in my copy buffer lol
@johnmitchell2741
11 ай бұрын
When your free updates are over if the tool doesn't get fresh updates within 30 days it won't work anymore, so i don't know how that's gonna work out . My d7 will work for 30 days without updating it then it says must install latest updates to continue
@wyattoneable
11 ай бұрын
@@johnmitchell2741I've not gotten to that point now have I heard of that, but I will find out pretty soon I guess.
@Papisartee
6 ай бұрын
What do you have to pay for ?
@Papisartee
6 ай бұрын
@@johnmitchell2741so it must be updated
looks like a gamechanger..as far as value of pricepoint., . 2nd vid ive seen that is enticing. have u used the thinktool pro,. if so how does it compare? thanks
@SchrodingersBox
11 ай бұрын
Sorry never used the thinktool so I can't make comparison.
I have the D8 ... It's a pretty great tool; but it was $700. It's particularly good a making IMMO keys and pulling codes for keys; I'm not sure if the D7 is as capable or not on keys. They also have one called A30M, and it's basically the same software (mostly), but it uses your phone instead of a tablet, and it's under $200.
@SchrodingersBox
Жыл бұрын
haven’t tried it on keys yet.
@only1hollywoodjacko
Жыл бұрын
Done keys on my camry and 2018 ram with the d7 but on the ram I needed 12+8 cable with star connector, so yes d7 can do keys but does not have the option of adding kc100, kc501 and ks-1
@calholli
Жыл бұрын
@@only1hollywoodjacko right on.
Does it show the PID numbers on live data? Eg transmission temperature so the PID can be imported into other gauges. Love your work, you have enhanced my mechanical knowledge ten fold 🙏
@SchrodingersBox
Жыл бұрын
Yes it does!
@Booki89
Жыл бұрын
@@SchrodingersBox that awesome, the interface looks similar to the A30M - have you tried that one ? Costs a bit less
Hi matt . I really enjoy both your pay channel and your KZread channel. I trying to catch up on all the videos in order over the years . That gonna take a bit. Question my current scanner charges me money per year to have bi detection . Is there a fee on this scanner for the bi direction controls . Ty so much for helping so many people.
@SchrodingersBox
4 ай бұрын
There is an update fee/ it’s pretty nominal but it does not affect bidirectionality ability. If your scanner requires a fee to retain bidirectional function I would say that’s pretty crappy!!!!
@scowan2003
4 ай бұрын
@@SchrodingersBox I agree and it graphs fine and works great but the ecu coding and bi directions controls cost 50 per year per manufacturer so working on 2-5 car week as a 2nd small job kinda sticks so I will laugh out loud :) at buying the newest model I think is the X tool D8 and I use it just for bi direction control . FYI if anyone thinking a buying a think-car scanner then be aware there a fee for bi direction control . I was the dummy didn’t read the small print ;) .
Hello I have the A30M by Xtool the little brother to that one for the most part bidirectional and bluetooth that runs off of android phone and I think it runs on apple too. I currently have it on my Samsung chromebook tablet, which has a screen recorder with sound not thru the xtool device. You did not show the graphing mode of the o2 sensors, and it was in that mode I could not get the recording function on the xtool or it was not there. So the tablet allowed me to watch o2 sensors, how accurate well it is sluggish but the video in the screen helps. One other thing the A30M is geared for DIY homeowner and it has lifetime updates too. Yes being retired I could not justify the 400 coin but 200 coin seemed reasonable. Wait till you get use to it, it gets easier to use, it is a learning curve. The remote thing yeah mine doesn't have that, but the remote thing it would need to be connected to a phone for the remote to function.
@pigeonsil240sx
Жыл бұрын
i also got the a30m, best bang for the buck
Are you able to graph live data with the d7? Like fuel trims and o2 sensors for example
@SchrodingersBox
Жыл бұрын
Yes absolutely you are. it’s not exactly the best resolution but you can indeed graph and in fact overly graphs
@jum5238
Жыл бұрын
That's EXACTLY why I keep my $6 android app Torque Pro with bluetooth connection to a generic OBD reader. graphing fuel trims and O2 sensors.
@jviews1
10 ай бұрын
@@jum5238 me too. torque pro in the car when i travel without the xtool.
Certain parts of Calif need the 'clear flood mode' stat !
@SchrodingersBox
Жыл бұрын
LOL!!!!!!
Can it reset a nox sensor on a RenAult van?
Thanks for the review. I'm hunting for a scan tool which will not break the bank. D7 seems tobe a feasible option. Can it do a transmission re-learn, required for the Subaru CVT's for example?
@SchrodingersBox
10 ай бұрын
I am not sure specifically on the Subaru but I have done similar relearns on other models with CVT’s.
@stanislavtodorov8705
10 ай бұрын
@@SchrodingersBox thanks for the reply. The functionality is just named in a strange way (or may be google translated from Chinese). As far as I understand it should be "Gearbox Match" in the special functions, according to the manual. Downloaded compatibility list for the Subaru vehicles and according to it, D7 should be able to perform "Clear AT learning value" which is denoted under the transmission module functions, but ATlearning mode (if it is the same as Gearbox match) is under Engine functions. It's kind of confusing.
As of now, price is $459. I'm sure it's still a great value, but very interesting in the timely hike in price, (or untimely, as it were).
@educationaltvshows9950
5 ай бұрын
250-300 bucks in aliexpress
Love my d8
I've enjoyed your channel for a number of years. But just a DIY'er. I've run into the need to retract parking brakes on a brake job. Will this do that? Thank you for for your clear and very concise instruction.
@SchrodingersBox
Жыл бұрын
YES!!!! Not only will it do it but I have a video showing the procedure on the Autel website.
@pto200
Жыл бұрын
I just read at the website that it has this function, but doesn't work on all cars. You'll need to contact the company to ask them if your car is covered for this function.
@SchrodingersBox
Жыл бұрын
Ah that very well may be true. And thats true for ALL bidirectional scantools. Just because a function is showing doesn’t mean it works on all cars. I get tons of failures to do commands on my Autel and Autoenginuity but sometimes one works where the other won’t.
@pto200
Жыл бұрын
OK. I'll check it out. Thanks for the reply.
Can this be used to clone a 2013 Subaru ECU replacement including VIN number?
@SchrodingersBox
7 ай бұрын
I don’t know about subaru programming specifically but it absolutely has ECU programming functions
I am looking for the Kingbolen K7, What's the difference between the Xtool D7 and the Kingbolen K7 ?
@SchrodingersBox
3 ай бұрын
I believe someone else answered this in the comments below a while back but I don't remember the answer sorry! Maybe scan the comments.
Thanks matt
Does this specific tool have oil pressure readout in live datastream mode??
@SchrodingersBox
Жыл бұрын
yes it does if the car provides that data.
Great Video. Im on the fence if I want to buy this one or pay a few hundred extra for the Autel MK808TS
@SchrodingersBox
Жыл бұрын
Good choice either way based on what I am seeing in comments. I dont have either so I cannot make recommendation.
did you pay for this tool or did you get the scanner free?
Thanks for the review. Would someone be able to tell me if this tool supports a Transmission quick learn on a 2000 Dodge Caravan?
@ZachElder
8 ай бұрын
There is no transmission learning on a vehicle that old
@vgbr88
7 ай бұрын
Actually, the A604/41TE has been around since around 1990 and utilizes a quick learn that originally required the drb scantool. Anyway, I'm not sure if the XTool supports it, but I have since discovered that the Thinktool Pros/Launch software has it. @@ZachElder
Does the D7 still come with only 3 years of patches? (A30M comes with lifetime.) How do they compare in features? (The A30M app cannot run on a computer, bluetooth won't work.)
@SchrodingersBox
Жыл бұрын
Yes 3 years.
With all these mid price bidirectional scan tools never seen one that will enable you to enter a new code when replacing a faulty tdi fuel injector. Is this tool fully capable of coding a new tdi fuel injector into the ECU. For 2009 VW GOLF TDI as an example ? Or is it just like all the others lacking in this type of practical support?
@SchrodingersBox
Жыл бұрын
Why would you recode a fuel injector?
@colin5064
Жыл бұрын
@@SchrodingersBox Unfortunately when one of your fuel injectors goes bad open circuit etc. Then you need to replace it, each fuel injector has a code which the engine ECU needs to function it correctly. So when replacing a fuel injector you need to enter the new fuel injector code into the engine ECU. This new code is usually marked on the top of the fuel injector, it will be different to your old one.
Excellent review Thank you! Do they make a blue tooth version? Does it have access to the secure gateway module on FCA vehicles?
@brianelliott6148
Жыл бұрын
Yes to blue tooth
@SchrodingersBox
Жыл бұрын
Not that I know of. I believe there are other models that may have that. I do really like wireless especially when doing things at back of the vehicle.
@advancedleveldiagnostics
Жыл бұрын
@@SchrodingersBox Thanks, I really don't need because I have a few Scan tools, But I have a key programmer from Xtool and it's great, and after seeing that price I'm really tempted!😄
@GrabLifeByDaPoosy
Жыл бұрын
@@advancedleveldiagnostics There's a coupon for $115 off of one of the Amazon listings putting the price about $350. The D8 is $560 after choosing the listing with $140 coupon. No rebate process necessary.
@advancedleveldiagnostics
Жыл бұрын
@@GrabLifeByDaPoosy Thank you, it's been in my cart for a week, I still can't make up my mind😅
Can it show live data duty cycle for an IAC? Purge duty-cycle?
@SchrodingersBox
Жыл бұрын
Yes you can. Again it depends on the data the car provides. I have not only seen duty cycles available, I have videos showing how I used duty cycle data from this tool Isla diagnoses.
Is it true you could program/reprogram a vehicles keys with this scan tool?
@SchrodingersBox
8 ай бұрын
yes it is!! On the D8 model.
Approximately how long should it take to run an automatic scan of all systems using an XTool D7? I started a scan and after a couple hours it still says “Scanning…”. I assume it’s still working, but the screen gives no indication that it’s progressing or doing anything. I appreciate your thoughts. Thanks.
@SchrodingersBox
Жыл бұрын
it totally depends on the vehicle and this is the case for all scantools. some it takes just a few seconds and in other vehicles I can take well over an hour. I personally never do full system scans for that reason. I just zero in to the module I suspect to save time.
@GrabLifeByDaPoosy
Жыл бұрын
Sounds to me like it might've glitched out. I don't think it should take anywhere near that long even with lots of modules in the car.
Any applications on medium and heavy duty international trucks?
@SchrodingersBox
7 ай бұрын
I have never used it on such a vehicle. My bet is if the vehicle has an OBD2 Diagnostics port the device will work just like any other OBD2 compliant scantool does.
So if wipers would not have worked, how are you 100% sure that it's not a command problem from the ecm or something else with this scan tool?
@SchrodingersBox
Жыл бұрын
Yeah I run into this a lot with my scantools on communications issues. There’s a couple ways. If the bidirectional control for the wipers doesn’t work, sometimes you can go to the BCM data on the scantool and if you manually turn the wipers on you will see the signal for it in the scantool- a read data only like on a unidirectional scantool. If you don’t have a scantool then it depends on the system. On a typical BCM controlled system you check wiper switch first. If that works You should see ground side switching from the relay control side when wiper is operated and if the wiper switch relay is commanded from the BCM, you simply send a load side voltage to the wiper and confirm it operates. If it does then you ground the control side wire from the BCM see if it operates.
I heard good things about the D7, now they've come out with the D8. But I'm not a pro, I'm a DIYer and as soon as possible I will be getting the D7. Sadly, I don't have the funds at the moment.
@SchrodingersBox
9 ай бұрын
I recommend getting the best one you can afford. The D8 is only around $400
@angeldelcourt6882
9 ай бұрын
@@SchrodingersBox Thank you.
@educationaltvshows9950
5 ай бұрын
Also d8s is out wich is more expensive. Or consider d7s wich is quite same as d8 afaik.
I have a D7 and D8. (Recently received). I find that neither does much with my early Dodge minivans (up to 2006). Either Dodge has locked all the functionality or XToool is geared more toward foreign vehicles. Really disappointed because I had high expectations. With these vehicles it's little more than an OBD2 scanner.
Does this have PMI (Programmable Module Installation?)? Thanks.
@SchrodingersBox
Жыл бұрын
not sure. it may have it on some vehicles. with tools like this you find that different vehicles offer different functionality. that would be a question for XTOOL specifically.
@abdul-kabiralegbe5660
Жыл бұрын
@@SchrodingersBox Yes. That function is found on Fords especially when swapping modules like the ABS unit. Just wanted to know if the D7 supports it. Like you said, a better place to check would be the XTool site.
Hi does this scan tool have a misfire counter and does it read fuel trims ??
@SchrodingersBox
Жыл бұрын
yes to both.
@northernpatriot9078
Жыл бұрын
@@SchrodingersBox thank you sir
@MarcBchannel
Жыл бұрын
I'm sure it does. I know my D8 does. The D7 does most of what the D8 does. It doesn't have some of the special added functions but all the main ones are there. Same bi directional control, all module communication, live data on any module that provides it, oe level tests. I just went out and read misfires, o2 sensors, trims. I didn't even know that a 1998 c1500 had a trans temp pid but I was able to read it. Great tools. I'm sure the D7 would do all of it
Link reveals 2023 model at $459 .. as of Sunday March 26, 2023 I noticed that your tool had a (1)notification…maybe update? My autoenginuity only goes to 2012🤦🏻♂ Hey.!.. 💁🏻♂CRS👀for me .. and out of date🤷🏻♂ ✅Thanks for your time & info👍
@SchrodingersBox
Жыл бұрын
I believe it would only be like $400 to update your autoenginuity, no?
@stepside2839
Жыл бұрын
@@SchrodingersBox not sure on cost and I have to boot up my outdated laptop. My Autoenginuity only does Ford, Chrysler, GM. The D7 does more than what I currently have & no laptop needed. Your enthusiasm for this product & its simplicity has swayed my thinking 🤔 So therefore💁🏻♂its all your fault👀LOL🤠 … Hey.!!.. it’s today’s MO …not my fault😆 💁🏻♂What🤔would Matt do.?.🤷🏻♂
So, say I have D7 hooked up in Korea, can you remotely connect and do diagnosis including active test? How do I set that up? Is it IP based? or through Xtool server?
@SchrodingersBox
7 ай бұрын
Yes you can do that!! It’s IP based- it’s essentially the windows screen share where you will get a code and the other user logs into your computer through internet and uses that code to take over.
@bekomcar554
7 ай бұрын
Thank you for your insight sharing. Well noted, that is indeed a cool feature I have been waiting for. Being in Korea, often I feel I could borrow wisdom from experts in remote locations. @@SchrodingersBox