Watch the follow up video to this one here: kzread.info/dash/bejne/e4qn1NOxpM_JdKw.html Updated coupons for this scan tool and more Xtool D7 Purchase Link: amzn.to/3zF7dvH 10% Off Promo Code : XTOOLCODE Xtool D8 Purchase Link amzn.to/3q3L3QQ 8% off Promo Code : AMD888D8 Xtool A30M purchase link amzn.to/3q4ClBD 10% off Promo Code : AMDAAA30M Xtool A30D Purchase link amzn.to/3f1p5r8 Xtool A30 Purchase Link amzn.to/32ZNj2L

@jemmace2586

2 жыл бұрын

@@calholli very helpful. Thanks.

@jemmace2586

2 жыл бұрын

I've been thinking about buying a diagnostic tool and programmer, this has given me more knowledge. Thanks

@gtibruce

2 жыл бұрын

You say this doesnt have gearbox match, is this the same programe as what is called transmission re learning or is re match something different ? So if different does this tool have re learn sequencing for at least Multi mode type transmissions on Toyota Yaris? and other models in europe thanks

@isrealdaBandit

2 жыл бұрын

Does it do reprogramming?

@dieseldawg7132

2 жыл бұрын

@@calholli that’s not a big directional scanner tho … just a code reader

Can you do a video on how you would use this scan tool on a used car before purchase? Upvote this if you want this video made.

@WastedTalent-

Жыл бұрын

I know this is a little late, but maybe it can help someone. If the car supports it (older cars, like my 22 year old Jeep doesn't), you can use just about any cheap scanner to "Check Readiness". That option tells you if the codes have been cleared by showing if the readiness monitors have been set. If they aren't, then either the battery was changed, dead, or the terminals were taken off for some reason (can reset the codes), or that the codes have been cleared. If it shows all of the monitors as set, check to make sure the EVAP is set, too. The EVAP takes the longest to set in a drive cycle. If that isn't set, then the codes were cleared recently.

@johnfitbyfaithnet

Жыл бұрын

He said you could check cylinder compression which is really cool

@1111comment

Жыл бұрын

@@WastedTalent- Yeah, but that’s not really a catchall gotcha. I’m doing repairs/maintenance on a car to sell and usually dc the battery while working.

@DefinitelyNotMyRealName

Жыл бұрын

Yeah. Scan it.

@Mach141

Жыл бұрын

Kind of worthless, unless your a knowledgeable technician, the scan tool information will be mostly meaningless to you.

Was told I needed a $500 Kia intake plus labor. Tool showed flaps stuck. Intake valve cleaner in an upstream vacuum hose fixed it. Tool paid for itself on ONE job.

Thanks for making this brilliant review! I spent months researching scan tools. All of them have evasive descriptions with claims of being able to read and erase codes, but none of them tell us the full list of codes they can deal with. They all say "read and erase codes". They list a few things they can do and finish with terms like "and more". I've checked dozens upon dozens of scan tools. Whether they cost $50 or $2000, all of them make the same claims. That's one reason why I've never bought one.

This has to be the best channel on KZread for anyone that wants to know about their car. This is especially true for Toyota guys like myself

My wife is going to hate this. I have absolutely Zero need for this tool. I stopped working on engines years ago. But I NEED to buy this. What a great review. Thanks.

@edwilloughby8976

5 ай бұрын

I feel exactly the same way. Not sure I'll ever need it but I want it.

@INTERNA9

4 ай бұрын

Got one.. Love it!

@predatorishi

3 ай бұрын

Tell her it’s an entertainment system 🤣

@khalifakhamis4040

3 ай бұрын

😂😂😂​@@predatorishi

@nickpaddy4568

Ай бұрын

feels the same but after working on a Renault master van III for days and no solution, i need this for the abs. Hopefully my wife will not ask about the price....😄

This D7, the upgraded D7S, and the D8 do NOT read the ECU for Toyota or Honda vehicles. We have both and that makes this unit much less useful.

I really appreciate how you went through the significant details, the ones I was most interested in learning more about. I got the information I was looking for. It sounds like we think a lot alike when it comes to value/skill level. Thank you for the time and effort you put into these, all have been nicely done!

I love your videos. So educational straight to the point, no anoying music and you really know what you are talking about. Thank you very much.

This is my first time seeing AMD smiling from ear to ear like a kid in a candy store and super happy.

Wow impressive AMD, thanks for sharing your reviews on this scan tool especially on pointing out the positive and negative side effects on using this tool. As a DIY viewer, I think it’s nice to have this kind of scan tool in hand. More power. God bless.

Hello AMD, thank you for this review of the scan tool. Your reviews are very well presented. I appreciate the time you take to explain how things work and why to do certain things. Your videos are very high quality as well as your explanations. All the best to you!

Without a doubt the best scan tool review and demonstration I’ve ever seen. Well thought out and easy to understand. I’m now a subscriber.

Just what I have been looking for.... This is the answer to most or ALL of my DIY projects and there have been MANY. Thanks a LOT.

Thanks for taking the time to out this video together I missed the holiday sales but have decided to buy this unit based in your recommendation. I don't own a Toyota but your content is still great to watch. Stay well and God Bless.

Thank you! Your video was not a waste of time. It was nice to listen to someone that had experience and didn't pretend or comment on things they clearly didn't understand. Very comprehensive review. Great channel!

Bidirectional control is very important and helpful if you are doing in depth DIY. It eliminates a ton of diagnostics so you can focus on inputs. Also being able to see streaming data. It is helpful to look at what is happening while the car is fine, say, how the O2 sensors are running. Then you have a baseline and can tell if something is wrong when the day comes.

I purchased a $200 scan tool about 3 months ago, and I finally had a need to use it. Unfortunately, it sits between the tool reviewed here and the basic cheap hand-held tools. The biggest drawback to mine is that it doesn't check some of the emissions equipment like the purge valve. This one definitely has my attention. Thank you for posting the review.

I’m putting this on my bucket list of things to buy!!

Owner of a few Toyotas, glad I found your video. You speak of everything I wanted to know and really appreciate what your doing!

One of the better reviews of higher end scanners. I love the narration while the scan tool screen in showing. Great job and I don't even need one . . . yet

Some of the most valuable 30mins of my life! Thank you

I wi say its refreshing to listen to someone get to the point and not ramble on forever. I swear some of these KZread must get paid by the minute. I'm impressed by how much this Scan to will do and how he went thru everything showing us. Can't think of anyone else n KZread that has been this thorough.

Thank you so much in teaching me how to use this scan tool, more than anybody else. It was confusing to use until now.

Let me tell you something mate, God bless you! this crazy world needs a lot more people like you!🙏👍👊

Great evaluation of this tool. Went to their web site. They've got specs on every on of their tools posted. Once I figure out which model is best for me, this will be my next scanner choice.

Thank you thank you, for a honest review... love the end where you said what you didn't like..

As an advanced DIY for 52 years, this will be my first bi-directional scan tool. Thanks AMD for this review.

Thank you. Since I bought a 2007 Sienna I've watched a lot of videos. You are one of the few who actually do things right, explain everything and produce the most professional videos. I looked up the Xtool D7 scanner and book marked it. On a side note. Just bought a 2011 Challenger with the V6. I few things I need to take care of on that. I was sitting at the dealer and they gave me the speech and prices on extended warranty. $2000 for 30,000 miles. My answer was. For that kind of money I can buy a really good scanner and do the work myself. Looks like this will do the trick. The world needs more guys like you.

@frankgeorge7288

Ай бұрын

ANCEL 4700 tools are pretty good

@devanhunter2890

Ай бұрын

And now dodge locked pulling codes from obd2 on their newer vehicles unless you're a certified mechanic...

There are sure a lot of features on that scan tool! If I ever get a new one, that looks great for that price!

My lucky day. First time I’ve seen your channel. 7 minutes in I’ve subscribed. I have two $100 and one $180 dollar scanners. A month ago Scotty was raving about a $5400 scanner and I was seriously considering purchase. Thankfully I didn’t. Your communication, demeanor, production quality, vocational experience and status drew me in and the scanner review hooked me. I’m sold. I’m gonna buy. Thanks so mush. ( I’m a do it yourself- er.

@TheCarCareNut

2 жыл бұрын

Thank you for watching and subscribing! Before you buy contact them and ask all questions you need about it to make sure this is the last scan tool you buy

@billsmith2212

2 жыл бұрын

I am a DIY . If you are using it mainly on a few vehicles , make sure those are covered . Depending how deep you want to go , ask which tests are covered on each vehicle . I have read comments that people complain that a $ 100 to $ 200 scan tool can't do EVERY test on EVERY vehicle - including some obscure models . What do they expect for that money ?

@gtibruce

2 жыл бұрын

@@billsmith2212 Hi, is it possible to check if this tool will relearn multimode type auto transmissions on many cars here in the UK like mine a 2013 Toyota Aygo as when you look at buying these tools its hard to know what they briefly mean? thanks

@dre983

2 жыл бұрын

When is Scotty not raving lol

@oznetyoutube125

Жыл бұрын

@@gtibruce REV UP YOUR ENGINESSSSSSSSSSS

Great video and clarity is excellent. The price is good for DIY users. I love your analogy and insight. Many thanks for the wonderful video 👍

Ahmed I cannot believe we r lucky enuf to have so much knowledge and expertise at our fingertips. I love the abilities of this tool.❤❤❤❤

AMD, Thank you for the info on this. The cost of the tool can easily be saved with the capability it offers. Just what I have been looking for. Have a great day!

As for your complaint about having to disconnect the dongle in order to store in the case, I always modify every tool I acquire, especially storage boxes, so I’ll probably be modifying the case to quickly store the entire cable assembly. I’ll also store the cable outside the box in the beginning by hanging it up to hopefully remove all the bends so it coils nicer. Either that or very gentle hot air gun to coax it out straight.

@gregzurbay9291

Жыл бұрын

Find a container you can use just for the cable and silicone seal it to the original case - then you will never need to disconnect the 2 pieces. This could be a tupperware or whatever....

Great Video! I am a DIYer and have been in the market for a bidirectional scan tool. I've looked at most of the top brands, but haven't decided on one yet. I like what this can do and the price is in my range.

Thanks for the review I just bought the D8 Bluetooth. I'm a do-it-yourselfer but I think it's gonna be pretty handy. I buy and sell cars on the side and I'm hoping this will keep me from making a big mistake.

Stay well also. I am going to check it out . You have the most through and informative videos out there. May you be blessed also. Thank you

You got subscription with this video! I saw that even you were blown away with this scan tool! Well so am I! And yes, I ordered one. Mainly because I'm tired up the constant update chip costs from you know who .. this is even better than theirs! I had that We That's Fun .. moment! Thank you for saving me so much time and money!

You are imaging. Thank you for all of your videos. Your videos and instructions like the best instructor I have ever met. Thank you so very much.

thank you for reviewing this for us. Giving the average backyard mechanic the incite of useful tools to have in their tool box!

Hi AMD, thanks for the info and opinions. The price of $479.00 could be the cost of one repair and considering all the other abilities, especially re-programming I think the price is reasonable.

Thanks for this great informative video. I don't do much diagnostic anymore but there are many things here that could be beneficial to me. I checked n amazon and they have the xtool 8 for around $700. And there's a pro model for around $1500.

Actually bought this and had it shipped same day because of this review, it works perfect so far. I'll be taking it to the car auction to really test it out later today!

Great video. I was looking to purchase a new scan tool and am glad I happened along your video. This is much more affordable than the others I was looking at. I will give this one a try based on your recommendation.

I love your videos! Very informative!🛠

Thanks for the video Andy. Been looking for a good scan tool and this one really impressed me so I ordered one. It will actually come in really handy as I’m looking at a second vehicle and will help out tremendously deciding on a used car!

I bought one of these about 6 months ago based on this video and your reco. Very happy so far. helped me get through ABS Brake system on my 2010 prius and multiple other problems n kids and friends cars. I have not done one of the three free upgrades yet as I haven't found anything that it couldn't handle with current software. There are some minor things I have found it missing but not much. I have 3 or 4 other scan tools in the $150 to $250 price range but they really don't do much more than the $35 dollar ones. I consider this my 1st Pro series scan tool (maybe semi pro but since I have never used a "Pro" one I guess I wouldn't know.

I JUST ordered it... now I'll watch the rest of this great video. FYI--- you had me @A/F ratio and TRUE milage.

DIYer here. I bought a lexus with a known bad transmission P0761. The deeper I get the more I need a proper scan tool. Now I see that I have to be able to activate individual valve body solenoids. Way cheaper than taking apart the valve body again. Just bought one. Subscribed. Thanks.

Thanks for the honest review Andy! I appreciate the pros and cons you give the conversation. What I would like to do is to one day be able to afford a couple of different bidirectional scantools because I hate to put all my eggs in one basket.

ordered the d8 yesterday and got it today just did the charging and updates cant wait to use it bought it after watching this video friday night

I don’t really know anything about automotive repair but your enthusiasm has me wanting this. Hahaha at 72 I doubt that I really need it but I’m tempted!

I bought one of those scan tools two weeks ago and still learning with it but so far it's just as good as my Snapon modious and alot cheaper

I’ve got an older model Launch - if everything you showed is real time (not sped up), this unit must be 50x faster! Seems far more intuitive to use as well. Added one to my cart already. Thanks.

Used one of these to program keys for a 2011 Camry

Excellent presentation very informative! Thank you for your time and knowledge!

Interesting and timely review. IMO the average DIY person who really wants to fix the vehicle needs the bi-directional control capability to do an adequate diagnosis of even basic systems. You've got more and more complexity in vehicle systems - yeah you can look at codes and live data but that's still half the tool needed. As you look at individual modules you need a way to verify operation or as example the famous evap leak detected codes a way to isolate the purge and pressure sides of the system. Its about time that big cost step for a bi-directional tool was reduced and I hope market competition will continue to drive it down.

@stephensbubble7333

2 жыл бұрын

The D7 is now retailing at a price on Amazon that's impossible to ignore. The claims being made for this System are basically, "No bluff we can't call" plus Customer Service which is recieving rave reviews.

@timicrowley6793

Жыл бұрын

@Tom Smith I need a scanner that can do the adaptive shift reset on the tcm on a gm I always need something more then love data or code reading. It’s always something I have to bring the vehicle somewhere before I can continue doing whatever I’m doing

@paulfredrickson8666

Жыл бұрын

I'm d

This is awesome. My Nephew lost one of my fey fobs and I went through the entire scenario you described, trying to prevent theft from the lost fob, having to reprogram the remaining fob and lock out the other, etc. Locksmith bill wasnt cheap.

@gregzurbay9291

Жыл бұрын

Let us into how much it cost to have the locksmith - sounds like the scan tool might be a deal....

Thank you once again for your time and shared wisdom.

Ok fine! I'm sold. Great review man. Just found you, can't wait to watch your other content

Thanks. Great video and you earned a new subscriber. Please consider one video using the Xtool D7 on what and how to check, to decide whether to buy or not a used car.

Finnaly got one, works good and fast. Would recommend as well.

Thxs for keeping us up on these diag scanners. Here's what I came across my Cando C-Pro when it comes to updating. After hours of trying to update, turns out that most of these scan tools will only do the updates when down-loading at 2.5GHz speed. Currently many of us can only get 5GHz speed and it's too fast to download updates, I was able to do my updates through my phone HOT SPOT / TEATHERING and hook up my USB to scan tool to phone. Just like magic it was all updated, just FYI in the event some of you guys come across an updating issue. I went months trying to figure this out and even mailed in to get it updated.

Thank you, sir, for the very useful information you are a very component mechanic.

Impressive. I paid more than the price you mentioned for a scan tool years ago that just outputs PID codes, which the user had to look up. Not much better than reading the check-engine light flashes - in the late 1980 vehicles. 😀 Thanks for showing this tool. I mostly use the smart phone scanner app. now. (Continuous convenient “compact” device monitoring). (Need to watch the coolant temp. - The cooling fan control is flaking out (a 2008 vehicle)… (Thank goodness the fan comes on high with the air-conditioning compressor activation).

That's a very good price for what it can do. Thanks for sharing.

Loved those slow scan tools when i was still doing mechanic work. It allowed me to finally sit down for a few minutes and rest my feet

I bought the eggs to a D7 a year ago because of this video I understand so much more about OBD Diagnostics because of this tool that wire is the only drawback the d8 Bluetooth without the wire that's my next move is to get rid of that wire thanks bro for the good information

That other plug with the round pins on it is the European standard one, the CEE 7/16 or "type C" plug. Used all over Europe, former Soviet Union and west Africa (though only for electric shavers in the UK and Ireland; for everything in continental Europe)

You are the best AMD👍

I have a couple of friends that are techs like you and I follow a couple on YT, like SouthMainAuto, and through that and my experience, all these features do not apply to all vehicles ... especially older ones. The other thing is that when getting down to the repair, it is almost imperative that you have a subscription that includes wiring tracing and the like. This does sound like it may be a really worthwhile investment. Real good explanation and video. Thanks

I just happened to see 1 of your videos, after watching a couple more I subscribed to your channel. I also Love the way you close Blessings to you too😀.

I did my research and after watching this video I bought the Xtool D7. It came in the mail Friday, 3/12/22, and I played with it on the weekend. I worked on My 2003 Volvo S40, which had the check engine light on. I was able to make the windshile go on and off and it read some other stuff.

Wow!!! 😳😱 THATS incredible! what that machine is capable of. (I'm from the old school...ignition points, carburetors, etc)👍🏽

@jasonmartin7245

2 жыл бұрын

Be proud of that knowledge, I honestly had 1 vehicle with a carb, 86 mustang, 1st car, 15 years old, I knew nothing 😆, just a pup then

New suscriber❤, thank you. You are the one giving us help that is not readily available . Godspeed to you and again, thanks.

Thanks very much. Appreciate the completeness of your reveal

I just subscribed to you. I've been asking Scotty and ChrisFix for this review for years. Thank you so much.

@Z-Ack

2 жыл бұрын

If you look to scotty kilmer for information and reviews than your looking in the wrong place there bud. That guy is only for views typical youtube dude.. like wranglestar. They spend more effort in trying to bait people into their videos than teach any valuable info in their content.. and most of the time its only their opinion and not fact.. look at scannerdanner or ford tech makuloco or south main auto.. theres a lot more worthy channels that will teach you things rather than bitch about nonsense or tell you they dont like a certain oil because its got more cleaning agents in it.. watch wes work is a goodn for diesels or bigger equipt thats got the basics included in his repairs. But with those channels you can look at their suggested channels and pretty much get all useful shit.. cris fix and scotty.. yea if you wanna change a tire or clean headlights.. lol.. gimme a break.. lol

@mikerichardson60

2 жыл бұрын

If you'd like to learn from an actual professional mechanic try Eric O at South Main Auto. Kilmer is a running joke honestly

@evanm9026

2 жыл бұрын

Scotty kilmer is the equivalent of a informercial clown

This is Quality content here Thanks!

Great video and content, I love the fact that you used real scenarios with your feedback regarding the battery life and the connectors, and hope the manufacturer takes this onboard for an upgrade. These tools are new to me and while I'm a novice, I see the benefits of special features and specific features such as compression tests (handy if you're looking to purchase a vehicle). I was considering the following 2 options before this video: Launch CRP129e or the iCarsoft CR Pro and was wondering if you could recommend something in between. Thanks from AUS.

Thank you for taking the time to review the scan tool. I'll look to see if you have a link to the unit so you can get a referral for the purchase. The scan tool that I have was an open box returned $36 unit from a Harbor Freight parking lot sale. It dose a great job of directing you towards the problem, but that's it. Thanks again!

Thank you for making this video, just what i have been looking for to add to my tool box for a fair price with this capability with bi directional controls. will also be using it at the shop. Been looking for a while. A lot of scan tools are over priced.

@carwrench2011

2 жыл бұрын

Have to wait a month, there on back order.

So after watching this video and some independent research myself afterwards I have purchased the scan tool . As a mechanic myself but working for a workshop , my at home diagnostics is very limited and have been thinking for a while to do something about that , not really knowing which way to go with a strict budget but thanks to this video I’ve made my decision.

@themeltingpot5668

2 жыл бұрын

Are you happy with the item after using it for a few months please let us know

@Chinkychops12

2 жыл бұрын

@@themeltingpot5668 He has not replied it must be crap.

@jasonmartin7245

2 жыл бұрын

I am curious as well. Considering opening a mobile diagnostic business, to scan, diagnostic services, relearn procedures for tcm, ecu, and contract out to local shops who do repairs and aren't equipped to reprogram, or are happy with their established services and do not need to take on that task. In last 2 years I used a mobile company twice for 20 minutes of relearn tcm at 150$-200$ each time

@wellnesspathforme6236

Жыл бұрын

Please update us with oros and cons... thx...

This a good, wonderful, video- well explained. Thank you!!!

Thank you Mr. Good info. I really appreciate. I will considered to by one for myself.

Hey, I would recommend testing an OBDstar as well, as that is their main competitor. There are also a lot of specific scan tools that are for J2534 passthrough only, meant for use with factory diagnostic. You can rent TIS and use a Chipsoft MID/PRO, or a CanTieCar. These are all Russian/Chinese made and very cheap, and give you the full functionality of the factory tool once you rent it for a few days! All of these tools have bidirectional control!

@Z-Ack

2 жыл бұрын

Rent? Ya lost me..

@theHyghwayman

2 жыл бұрын

Me too... what is this rent you speak of?

That tool would be worth it's weight in gold when buying a pre own vehicle being able to see actual mileage any past or present codes and if any other key's and being able to erase them. Btw i got a screw in the center of the tire very repairable and the warranty cover tires i thought that they were going to repair the tire but they just replace the tire with zero out of pocket expense

Great job explaining the tool

Thank you for such an in depth review

That scan tool is amazing. I know what i want for Christmas .

@richardscathouse

2 жыл бұрын

You may have to swim out to a container ship.

@TherealDjTired

2 жыл бұрын

I have just ordered one and it will arrive on the 3 Dec, so it is around Christmas...I hope it will arrive by that time.

Working in IT i love these kinds of control. It makes things so much more interesting and allows you to confirm what is actually causing the issue!

@Z-Ack

2 жыл бұрын

U look like barak obama.. in the pic.. lol..

@Elt31987

2 жыл бұрын

@@Z-Ack used to get that all the time lol

I’ve had an xtool ez500 for couple years and have to agree with your very thorough review… support is a bit inconvenient considering they are based in china but I was very surprised with the speed and level of service provided once I reached out

Amazing 🙏 👏 🙀 This guy is a real professional... He really takes his craft seriously.....he also has charisma and style....🤪🤪🤪🤪

AMD, Great breakdown of scan tool, just what I have wanted, it’s hard to find bi-directional descriptions.

I bought this scan tool through your link. Thanks very much it has been very useful. There are still some reset functions that i can't access on some cars so still need an official dealer for that. But overall its great

I gotta ho but a fascinating video. Will save. Subscribe and come back to finish watching. Thanks for your valuable time you offer us free of charge. See you very soon, people like you are true American Heroes who help so many of us in need of coaching.❤❤❤❤❤

Lol it’s sold out. You probably made this company very happy! Now they have to scramble to get more into the Amazon warehouse. Added it to my list!

If key programming works, then Autel money it’s worth around $3000 USD. If it doesn’t work, then it’s still amazing the amount you can do. ESPECIALLY output controls for body functions! Would be kinda funny to see that thing hooked up to my 02 Tacoma 😂

Thanks for the video I purchased it after watching your video good job.

I get my new Corolla next week, and I have a Carista in my desk drawer. I'm interested in seeing how well it works on a Thailand Toyota. :-) The Xtool looks great, but for me, the dealer will be doing everything above very basic driveway tasks. All I really want to do is look at the car's options settings.