Another great video. Thanks for sharing your settings.

@SodaCityBoards

Жыл бұрын

Thanks so much! Glad to be able to help out others!

Thanks so much! I’m making laser engraved key chains to pass out this Sunday for pet care givers for our Blessing of the Pets Sunday. You just made my life so much easier. Can’t wait to see what other videos you post. Thanks man!

@SodaCityBoards

Жыл бұрын

Thank you so much! I really appreciate it! I am glad I was able to help you and save some time!

today was the day to learn to make jig for keychains - and loved your video and going to check out how and also your file - thank you again

@SodaCityBoards

Жыл бұрын

Glad that I was able to help you! Good Luck with your keychains!

Awesome video!!

@SodaCityBoards

Жыл бұрын

Glad you enjoyed it

Nice work !!!!!

@SodaCityBoards

Жыл бұрын

Thank you!

Thank you for sharing 👍

@SodaCityBoards

Жыл бұрын

No problem 👍

thank you so much for this video you help me a lot

@SodaCityBoards

4 ай бұрын

Glad it helped!

Just starting my own laser business. Thanks for the information.

@SodaCityBoards

8 ай бұрын

That is awesome to hear! I hope everything goes well for you!

brow love it

@SodaCityBoards

Жыл бұрын

Thank you!

Nice job 👌

@SodaCityBoards

Жыл бұрын

Thank you! Cheers!

Nice first video. I have had my laser for about 3 weeks now and have been focusing on leather patch hats. I have had a few orders but really want to get into other products.

@SodaCityBoards

Жыл бұрын

I appreciate it very much! The leather patch hats are another top seller of mine! I do leatherette with adhesive on mine instead of real leather!

Nice first video! I have not done a jig yet… I hope to soon!

@SodaCityBoards

Жыл бұрын

I appreciate it! They are pretty easy to do once you do it a couple of times!

Hi there, Great video, Watching from philippines.. 👋

@SodaCityBoards

Жыл бұрын

Thanks for watching!

I used to do the cardboard cut out but I found easier way that works for me. I start by getting a piece of wood depending on how many keys you want, then measuring your key to laser cut to size, then you have a permanent template. First cut out on scrap wood a single piece to get a perfect size. I also have a pen engraving template, it works perfect. Enjoy 👍

@SodaCityBoards

Жыл бұрын

Smart idea. I have thought about it but I know I’d never get it lined back up properly. That’s why I do cardboard

Awesome video. Short and to the point. I would like to know how do you know your template is in the right spot when you put it down? Do you have a thing like the clack shack where you lock it in place?

@SodaCityBoards

Жыл бұрын

Thank you so much! I actually get so many shipments every week between supplies from amazon and multiple other vendors and I cut the boxes and pile them up in my garage and when I need a jig I just tape it down and cut it for a one time use! Then when I am done take it up and throw it away. I have thought about doing it where there are parts to lock into place but have not come up with the material to make it yet.

Great Video. Answers a lot of questions for me. What does BLAST mean?

@SodaCityBoards

Жыл бұрын

Hey Jeff, BLAST is the name of a cornhole company i made these for!

DO you have any setting suggestions for bamboo or acacia cutting boards? My 10w should arrive today! I downloaded your google sheet and i appreciate the work and effort for the videos. I will be following along the way.

@SodaCityBoards

8 ай бұрын

Hello! I believe i have those settings on the google sheet as well! I am currently running some bamboo post it not eholders on my xtool as my OMTech is down and running at 2800 mm/m and 100% power!

Thanks for sharing, 1 question, do you seal the keychain with any type of sealer or just leave it ‘raw’ untreated?

@SodaCityBoards

Жыл бұрын

I wipe off with isopropyl alcohol and leave them as is!

Have a question, is there any translation on settings to do this in XCS? I like a your videos, but mostly on Lightburn.

@SodaCityBoards

Ай бұрын

I don’t use xcs at all. Lightburn is the best out there in my opinion. I have tried it maybe once or twice so I really have no knowledge of xcs

Great job. Do you happen to have a link/template for the keychains file? And thickness (or link) of the cardboard used…I like this technique and it would be really helpful for bulk orders. I appreciate it

@SodaCityBoards

Жыл бұрын

Hello, I don't have the file anywhere other than on my laptop, I just made 2 rectangles the sizes they need and welded them together and cut it out. As for the size it was a fedex box!

Do you ever spray borax on your keychains before laser engraving and also after laser engrave do you put any type of clear coat to protect the engraving?

@SodaCityBoards

Жыл бұрын

I have not used the borax method before! On these i do not do a clear coat on them once done.

Good job. Love your website. who designed and who are you using for payment processing. I just can't decide!

@SodaCityBoards

Жыл бұрын

Hello! Thank you very much! I actually did my own website through shopify and build websites on the side - Have done probably 30-50 for different cornhole building and woodworking companies in the past 2-3 years! I would love to help out if you need it! Shopify is by far the best in my opinion and the easiest to learn as well. I use the Shopify payments processor for my website.

@billieb

Жыл бұрын

@@SodaCityBoardsI do websites as well but thanks for the offer. I want to try pic on wood. What did you use for settings on d1? Do you use imagr to fix photos?

@SodaCityBoards

Жыл бұрын

That is awesome! I highly recommend using Shopify for your website. Best there is in my opinion. For my engraved photos I convert them over using imagR then did a power speed test to find the settings I liked engraving wise I believe I do around 5000 mm/m or 6000mm/m at 100% power and 0.080 Line interval.

pas mal mais ça aurait était bien de partager les gabarie fait avec lightburn que on puisse nous aussi les faire.

@SodaCityBoards

Жыл бұрын

Thank you for the response! I have added the Lightburn file for the jig to the description of my video for users to download!

@SerialiPh

Жыл бұрын

@@SodaCityBoards un grand merci

Spelling error on your website: Low Profile Truck Hats Leaser Engraved with Patch Leaser

@SodaCityBoards

Жыл бұрын

thanks. i fixed it.

Can you do a template for the circle ones? Having trouble over here trying to get my first project.

@SodaCityBoards

Жыл бұрын

I actually have one! Can you reach out to me via my website or Facebook page?

@StevenDeLosSantos

Жыл бұрын

Just added you

Are you only selling in groups of 50 or do you do any 1 or 2 and if so what are you charging?

@SodaCityBoards

11 ай бұрын

I only offer them in packs of 50 as I’ve never had anyone interested in singles

@jimhamilton2680

11 ай бұрын

curious as to your pricing without shipping for 50 units@@SodaCityBoards

@jimhamilton2680

11 ай бұрын

may I ask what you get for 50 without shipping?@@SodaCityBoards

@SodaCityBoards

11 ай бұрын

@@jimhamilton2680 $85 for single side engraved, $125 for double side engraved

How much this machine cost in india

@SodaCityBoards

Жыл бұрын

If you follow the link in the description you may be able to see. I am unsure