Spoiler Saver and Fun Fact Did you know? If your circulatory system were laid out flat, so your veins, arteries, and capillaries were stretched out it would cover 100,000 miles!!!!!! WHAT! I can't get my head around that 🤯

@mikethedigitaldoctorjarvis

2 жыл бұрын

If your circulatory system were laid out flat, so your veins, arteries, and capillaries were stretched out it would cover 100,000 miles....plus,you would also be dead !

@momoster69

2 жыл бұрын

pls, dont scare me uncle vin.

@saabwitha2.3turbo81

2 жыл бұрын

I also read that my ass could stretch out to 1 meter

@loganarmstrong5855

8 ай бұрын

@@momoster69❤❤❤

Great stuff Vince. Your soldering has come a long way! Good to see the upgrades too, you're going to love them. On a side note, if you need spares, I have stacks of them. I can send you some replacement cases, ports etc if you need them, maybe do a revisit on it for another video if you wanted to? Happy to send you a care package 📦

@mistwolf

2 жыл бұрын

I love this community

@MellowVR24762

2 жыл бұрын

Hello coder 😊👆

@MellowVR24762

2 жыл бұрын

Coder you the man what a great community love both your channels 😊👍

@Mymatevince

2 жыл бұрын

Good man Phil, thank you 👏

@richardstone8615

2 жыл бұрын

Respect ✊🏼

I reckon someone tripped over the cables with it on the floor and then stood on it in the ensuring panic. Great repair Vince.

Spinning discs REALLY hate being dropped, or thrown from a window...nice work.

I loved watching you chase that solder around at about 26:15 😄

Another Great Repair Vince! I've been busy doing a few bits and bobs myself.

@coco_animates

2 жыл бұрын

Nice

@BuyitFixit

2 жыл бұрын

@@coco_animates Thanks! Got a few VERY rare retro game repairs coming soon...

@Seaolae

2 жыл бұрын

Cool videos ^^

Hi There, I absolutely love your channel!! I suffer with Anxiety and depression and your videos have been a godsend to me over the last year 😀

**ADDENDUM** With Cracked Plastic you can super glue the cracks together by ensuring enough glue is used so that excessive glue oozes out on both sides of the crack for you to promptly clean the excess away from the external surface, Once the glue is set, I found using an old soldering iron and some sacrificial internal plastics from the repaired case "or if handy some other case" the cracks can be reinforced by melting extra plastic on the inside over the crack, if enough glue was used and the clean up done in time the crack should remain undetectable..

I thought for sure with a drop that bad there would be some BGA ICs needing replacement. I guess it depends more on when the drops occurs (under use or after the board has cooled). Rather it's was a bit of luck I suppose really just needing a new HDD. Nice repair overall Vince!

@Mymatevince

2 жыл бұрын

Very lucky considering the amount of damage on it. Unbelievable that the BGA chips survived! Cheers Shawn 👌

In the next episode: Vince will try to fix his wrist or sell it for spare parts

Excellent job Vince. Always nice to another item be saved from e-waste. Makes me want to get out my soldering iron, but I have nothing to fix, yet.

Another great video to watch on my birthday This day just gets better and better!

Thoroughly enjoyed this one mate, the power of the Hako looks amazing! 😎😊

You are almost at a million subs!! Way to go Mate!

what an awesome repair Vince great seeing you replace the ports and getting it all working again :) good job :)

Wishing you a fast recovery, mate.

Good luck with the hand vince, i wouldn't have picked you for a skater, but it is always nice knowing more about you.

Great job, Vince 👍

That skateboarding story alone deserves a like for the video!

What? Flew out a window? These repairs keep getting crazier! Nice video

Now you have the new tools, I expect nothing but perfection on all the soldering from now on. Good fix. Feels like half of your patreons are in our facebook group lol

Loving the content so far, got me inspired to open up and clean some of my consoles.

Hey Vince, I absolutely love your channel. I have learnt so much from them. I was wondering if you would be willing to make a video of all your gadgets and tools that you use? Especially the small testers that you use.

The fact this Xbox One works despite this kink is a bloody miracle! The location of the kink is indeed the saving grace! And it’s no surprise the hard drive stopped working. If the Xbox One itself suffered that much damage, the hard drive must’ve taken a massive hit. It may be more vulnerable when it’s spinning, but with enough force, even an inactive hard drive won’t survive.

I have this exact same problem with my Xbox One S (although without the physical damage or HDMI port problem) and now I should be able to fix it! Thanks Vince for this amazing video! You're a life saver :D

Fantastic work well done mate

Nice to see your port soldering job is getting better.

Great video vince mate 👍

I was wondering how long till we got to see a Hakko appear in the videos ! And when you realize what a proper iron can do for the repairs, wow! Congrats on the upgrade Vince !

Very cool you were able to get that fixed for them again! I did a similar button swap on a set of computer speakers - one of the buttons on control box failed (turned it on once to many times I suppose) so I swapped it with a different button that I never used

@Mymatevince

2 жыл бұрын

Thanks Garth 👍

Hello Vince, another good video. Regards to the air machine how about putting some sort of brush on the end , so as the air blows you could also brush whatever you are trying to clean might get a better results.

Well done Vince great video 👍

Great job Vince =D

Nice choice with the new gear, I’ve used The quick 861DW for a couple of years now, it’s a great unit.

Another great video. you inspire me so much.

Nice upgrades Vince, you’ll find it much more pleasant working on boards that suck up the heat with those tools!

To skip the high price of the data vac, I bought an electric pump from argos for £15 which is supposed to blow up air beds and paddling pools ect..., it does the trick amazingly, it has adapters and with a little modification you can hook up different size tubes.

Good fix Vince.

Well done! Great fix!

Amazing fix Vince. 👍

14:54 I love that the Salvation Army brass band was playing right outside your house during this repair! 😋

@williamharris8367

2 жыл бұрын

Vince's neighbours were probably less thrilled than he was.

So sorry to hear about your accident Vince I hope your wrist gets better soon here are some chocolates and some flowers just for you my mate Vince 🍫💐

Funny story about things out of windows, my old mum so fed up with my brother just watching Star Trek and not doing his uni work well her and he ended up having this massive barney and my old mum had an Irish temper so she lost it picking up his very expensive Franklin Mint Starship Enterprise and flung it out of the upstairs window where it narrowly missed hitting an old bill car, it was so funny my brothers pride and joy flew like a brick and landed like one and me mum was whizzing his Star Trek DVD's out the broken window like frisbees by this point. Strangely enough my brother did toe the line after that and I managed to unbend the Starship Enterprise enough to look fairly OK although it was missing its gold deflector as someone had that away as it was real gold too hehe

nice one vince,was the family happy is it running ok since.

love these vids vince :)

I started listening to Sleepaway Camp.🎶from one of your previous videos. Great band.

Nice one mr Vince

What a top bloke, you can fix anything

Yesss been waiting for another modern console for a while

Nice save Vince.

great job vince

Forgott to say love your channel :)

He has done it again folks, our superhero has saved another machine

Great work as always, and congrats on your new equipment👍 Would love to see a video where you show your equipment, solder/hot air station, microscope, cameras, mic etc. Doesn't have to be a long video, maybe 10mins, like a Tea break show and tell😄 And maybe some links to where you buy things like solder, flux etc.

Violins and symphonies.....oh you said sympathy...for what?! 😉 Just joking! I hope you recover soon, Vince. You live n learn, still you got more courage than me, skateboarding looks scary. Nice method of switching over the HDMI ports, clean swap. Glad to see the console working again.

Been wanting to comment on your new equipment for a while! Nice one! Would you consider perhaps making a video on what you have now? Especially the microscope! Been struggling to find one that will work properly and is not too much over the top!

I love all this close up soldering.

low melt solder works nicely... with flux ;-) Nice video Vince!

Fell? Nah that's absolute Rage damage. Seen it before. Spoilt kid loses it after losing Fortnite, stamps on console. That explains the extreme bowing, crack position, removed bottom cover and distorted metal base. No way is that fall damage. If I had a kid who raged on an expensive system, no way on earth I'd buy them another.

Great fix vince

Love you have new setup would like too see the model of microscope and heat station if u can list in sometime woul be great. Brilliant video there vince loved it. Also waiting for another car vid

Wow! I was sure that thing was never going to work again! Very impressive!

Great fix! That xbox one s … also known as the SAD version.. was looking like it before you got to it!

That low melt solder really is magic!

Thank god for you Vince at least you care about consoles good on ya man

Amazing that it works at all after that kind of damage. Quite fittingly watched this episode using Xbox One S, but mine is the disc version :)

He can leap tall buildings Soder anything befriends all chips knows his components. He is the super hero of electronics

The thing about canned air is that it doesn't actually contain air, because the pressure needed to liquidise air is much larger than a simple spray can will contain. So aside from the obvious waste from the cans, you're spraying either pure butane, propane, or fluorocarbons in the air.

@qwertykeyboard5901

2 жыл бұрын

mmm... delicious...

@Jdbye

2 жыл бұрын

Most likely butane. On the upside, you can also use it as a makeshift blowtorch/flamethrower :)

Love your content

Great job!

Good fix. May have been less exciting and not the most long-lasting fix, but you saved it from the landfill for now and hopefully by the time it goes fully, it'll be time to get the next gen Xbox anyways.

Hey im gonna do a reaction to that song you played, and mention your channel. I've never heard of that group before, very beautiful song.

Hopefully you will feel better soon it’s never joking if you fell down on your wrist hopefully you will getting better soon I feel for you Best regards your subscriber car_thief

This reminds me of the ps2 i fixed that had gotten the same treatment..... The dvd that was in it was in 5 large pieces and the case was also bevond repair. Though interestingly enough it still worked after cleaning it out and re assembling it with a new case. I actually still have it after all these years for having it as a spare console.

Nice job, what microscope are you using ?

My god that’s brutal. I wouldn’t even consider repairing that myself, it’s off to the repair shop if it were me.

@MyRegardsToTheDodo

2 жыл бұрын

I've had quite a few PS4s that got dropped, one I even found on top of a trash can with the upper case and the metal part missing. The board is normally OKish, most of the time the harddrive, the drive (which isn't an issue for an all digital version) and sometimes the PSU are dead. The PSU can be repaired, if you find the fault, but the harddrive and the drive need to be replaced (or atleast the laser, if you don't want to replace the entire drive).

@tumbles8350

2 жыл бұрын

Straight into the fuck it bucket

I like videos like this the most

I use an air compressor with a small tip air gun attachment. It blows the competition away.... literally.

I use an Data Vac as well I just use the normal size nozzle works great,the weird straw actually nerfs the the power quite a lot.

Nice equipment Vince. You're right. It was about time to buy good equipment.

hey bud you could ask Cod3r he might have a spare case or parts to make a bad case look good great vid

Guess another thing is coming to be fixed judging by the ebay chime from your phone during the video ;). Well done - I'm sure half the storage won't bother the owners as it came to you dead and returned to them working.

50 min video!!! Thank you

Well done.

These are trying to fix videos, I don't care what tools you use. I'm a common man and I don't know how to solder. Good job as always.

With a musical score "Three blind Mice" as background music lets sing "flux~Flux~FLUX" 3 Times... Whilst you dab flux every time before any soldering, especially with low melt solder which is devoid of Flux.. BTW.. Watching you Solder via the microscope one would be convinced they are watching NorthridgeRidge Fix..🙂 APU I dropped a, 👉👍👈

Ooh, awesome to see you skating with your friends! I hope your hand get fully heald! My favourite cleaning tool is IPA (ofcous) but after that the stream machine with the brush. Nice that you treated yourself with a some real equipment. I think you proved that you can do stuf like this with entery lvl tools 😉 And now you can tell peapel your not a real mechanic some things i do maby wrong or dangerous and take this just for entertainment 🙄 😉 Thank you for your video, looking forward to see you get back on that rolsroys :)

@Mymatevince

2 жыл бұрын

Hahaha, yes I can say that Anders, a perfect opportunity to start saying it again 😂👍

@rich1668

2 жыл бұрын

Yeh I like a bit of IPA as well 😅

I would have tried using hot air from the bottom of the board to do the button swap, it’s a good trick to do surface mount items which you don’t want to melt

You have a pretty good taste in music. Could you perhaps share your favorite artists?

Good fix. With the new hot air gun you should burn boards less, as the components come off quicker. You probably could have taken the hdmi connector off without damaging it by heating the board from below with the new air gun.

You know there are more videos coming when you here the ebay app in the background 😊

Can you do a list or video of the flux,solder braid etc what brand you use and where you buy it from?

Soldering tweezers works great for bind buttons and similar switches. 😀

Hi Vince what solder braid do you use please.

The xbox one x and one s can take quite a bit of damage and keep going, in Microsofts defence, apart from the odd faulty hdmi part and mashed hard drive, everything else is pretty robust (until someone introduces liquid through the top.)

i always use a bog-standard small wall paintbrush to remove dust from boards, you can brush and dab to get right between vents etc,

give you Huggs hope you heal well poor Vince

Vince, what Microscope did you get? I am looking for a Microscope and plan to do repair videos also.

I did skateboarding as a young 'un, used to longboard in a point of Greenwich park and it was estimated by time you got to the boating pool at bottom you were doing 30 mph plus and only your Converse trainers to stop you too, well I ended up hitting a stone on the way down and it launched me through the air because of the dead stop smacking me head on side of a park bench and all these people around me clapping saying "do it again" :(

Kinda cool that the xbox provided its own replacement parts