Ordered the Bottom Shell and also a new frontplate from extremeRate for my Elite Series 2 Controller because the rubber is coming of on both of them. So I can't wait to have an Elite Series 2 WITHOUT the faulty rubbering from Microsoft! Thank you extremeRate for offering these parts so I do not have to throw away my expensive controller!

ordered and delivered in 1 week, perfect tutorial , my new controller looks beautiful, thanks guys youre doing great work.

@ExtremeRate

5 ай бұрын

Great to hear!

Thank you SO much! I did a full shell swap on my controller and didn't have an idea of where to start from!

This video was a huge help. 👏👏 Wouldn't have been able to replace the bottom shell without it! Thank you! Look forward to modding the next controller w/ Xtreme Rate mods! 💓💓 Those T4 screws were the hardest to remove and install. So small and hard to screw it.

Outstanding detail. Helped me out in several places, thank you!

I love this look, it looks really clean. I wouldn't have thought of a wood grain back panel, that's kinda dope!

Protip I found when replacing the shell on a 2nd controller... the free screwdrivers can be magnitised using the old magnets on the origional case :D save having to try and fiddle around putting those in

@ExtremeRate

5 ай бұрын

Great found! :D

ordered front and back for my xbox elite 2 and also for the ps5 edge controller amazing company .

Thank you for this guide, I've managed to change the back plate on my controller thanks to this. The rubber on the official back piece is ridiculous and peeled away so quickly

Excellent instructional video, thanks. One addition I would suggest, is the mention of the plastic rings on the front shell. Not all new shells come with them installed and i nearly missed them. Easy to remove. Apologies if they are mentioned and i missed it.

Works great just got finished

do you have to put the magnets in if you do not use the charger??

Finally back shells to match the fronts !!!!!!

@ExtremeRate

6 ай бұрын

YES!

My magnet bars didn't have lines on em...how can I tell which is the weak side without it??

@zakalwie99

Ай бұрын

Mine had lines but one up and one down 😅 I'm still putting my controller back together and I'll hazard a guess it doesn't matter too much. They will make the back sticks more secure, I'm guessing.

Hi, I bought it and following your amazing tutorial step by step, everything perfect except for the magnets on the back of the controller, they wont stay glued to the back with your method. Any solutions?

Do i take off the magnets from the old one to put on the new one bc there was no magnets is the package 2:52

Hi! Love the feel of the product. Only thing I’ve encountered is the controller only works when it’s plugged in for some reason. Any thoughts on where I went wrong?

These videos have an irritating way of making it look easy. Just removing the top and bottom plates could have been a tutorial video in itself. But I followed the instructions as closely as I could and I got there in the end. So now I have a nice new casing for my Elite controller that isn't bubbling and peeling off just a few weeks after its warranty expired. Thought I was going to have to buy a whole new one, so thanks. :)

I need this for the first elite controller pls

I orders this out it together and my paddles are loose and my trigger stops don’t stay. Any advice?

can you power down controller to zero power or is turning it off regularly enough to start repair ?

I’m good on doing all this on a controller that it’s gonna last about two months before it gets stick drift, bumper issues, etc

Getting rid of that rubber grip is exactly what's needed. Changing the setup to the standard shell no rubber makes the elite 2 stronger.

Great tutorial and love the look. Unfortunately after doing it all now the controller doesn’t work. It turns on but doesn’t control the Xbox. It still charges on the charger stand. If you plug it in with usb c it turns on but doesn’t let you control the Xbox. Not gonna refund or anything I’m sure it was my mistake. But if you can think of a way to fix it it’d be great !

@NadiraBarIdan

4 ай бұрын

Have you tried to re assemble the controller again? Maybe you missed something. The video is pretty straightforward and the main mother board and the xyab buttons shouldn't be affected from the back panel installation, unless you accidentally disconnected something. Try also looking at some other videos explaining how to disassemble the controller and put it back together. Hope you'll fix it.

🔥

How do you dismantle trigger locks?

This may sound weird but you should also sell all other parts minus the back shell. Or each component individually. I would buy! I want to install an original shell.

@ExtremeRate

5 ай бұрын

The fact is the housing and buttons are complete

Classy. Lol love it.

@ExtremeRate

6 ай бұрын

Thank you!

Where do you get the stuff to stick the magnets to the controller?? Seems like you had the perfect size. Cant fund them things anywhere...

@zakalwie99

Ай бұрын

Hope you found an answer, but if not. I was lucky enough to still have the sticky in place when I removed my magnets. Also, the cover has plastic guides and you don't really need the sticky. If you're not that lucky, some good quality double sided sticky and a scalpel will do it.

You need this in clear!

@asukahikari9790

5 ай бұрын

They provide several 'clear' shells, with a coloured tint to them

@ExtremeRate

5 ай бұрын

Yes Sir

The left paddles doesnt work anymore why is so?

Just ordered the blue flame back and shell cover, since my original are cracked. Seems like the plastic of the original was cheap plastic.

@kronicracer

2 ай бұрын

The plastic is thin because of the rubber grip that peels off. Once the rubber grip comes off the integrity of the controller is lost.

@gee3341

2 ай бұрын

@@kronicracer I've noticed that when I took apart the control. I saw all the cracks inside on the back and face shells of the original. The rubber grip kept it together from completely cracking.

Need the Dualsense Edge version of this please!

@ExtremeRate

6 ай бұрын

Do you mean the wood grant?

Where can I get the magnets that hold the paddles?

@zakalwie99

Ай бұрын

In your old controller case? That's where mine are.

Edge controller 4 paddles wen?

@Wafitafi

7 ай бұрын

I asked them on messenger and they said some time around 2024 but didn't give a specific date

@ExtremeRate

6 ай бұрын

2024

The magnets I ordered came crumbled :/

@ExtremeRate

5 ай бұрын

Please contact our customer service retail(at)extremerate.com

Do you have this for the series 1??

I just need the magnets...

@ExtremeRate

5 ай бұрын

We don't sell them alone...

@NickMullins117

5 ай бұрын

@@ExtremeRate that may be worth considering in the future.

why is it AI voice generated?

@ExtremeRate

6 ай бұрын

We have lots of video but we can't talk too much...

@zakalwie99

Ай бұрын

What an odd question. Maybe he/she don't want their voice or couldn't decide on who to use. Or maybe they are shy 😂

No bottom grips. No thanks

out of date instructions, garbage shell from a garbage company. Go figure The bottom shell does not just 'wiggle' off as shown. It takes a fair amount of force, and in doing so, you destroy the entire $200 product.

Where i can buy thay doble side stickers for the magnets?

The T4 screw driver I was given is too big for the back paddle boards… 🫠

@_ALLEGORY_

2 ай бұрын

Same issue...

@Andy_Requiem

Ай бұрын

Same happened to me, I had to use a T3 screwdriver 😅

@joindivision1090

14 күн бұрын

I thought that at first, but the trick is to apply greater force pushing down than is applied rotationally, which is a bit difficult with such tiny tools, and especially when unscrewing for the first time as they are so stiff. I found what really helped was to wear a grippy glove, I used a gardening glove with rubber dots on the palm side, but a washing up glove would probably work just as well. That way you can firmly grip the tiny screwdriver and carefully apply the forces you need to. Hope that helps.