X1 Pro Gen 3 BSA Installation on Cotic Jeht - most EXTREME ebike conversion kit from CYC
Ғылым және технология
Follow along as we install the X1 Pro Gen 3 on a BSA/ English threaded Cotic frame.
This high-powered mid-drive electric bike conversion kit is designed to achieve the ultimate. Equipped with advanced torque sensing, instant throttle capabilities, & customizable tuning. The X1 Pro Gen 3 is made for the extreme with power unheard of.
Installed here is the 3000W/ 150N.m. version but a 5000W/ 250N.m. version is also available.
Designed to fit over 90% of all bike frames, this kit is not just powerful, but versatile and fat bike friendly.
Pre-order now: www.cycmotor.com/product-page...
Frame: Medium Cotic Jeht
Facebook: / cycmotorltd
IG: / cycmotor
Пікірлер: 65
Now we need some in-action footage of this bike!
@cycmotor
Жыл бұрын
Agreed! We'll upload some more content soon.
@patrick1978maas
Жыл бұрын
@@cycmotor That's true! Just give the Cotic hell Cathy.
I am a huge fan. My family and I have been looking into ebike conversions and you all have a real winner. We hope to get our bikes equipped with your product soon. You'll are awesome. Thank you
@cycmotor
Жыл бұрын
Thanks for the support! If you need any info, don't hesitate to reach out :)
I like the new flat battery mounting position. It looks a little less big from the side angle. Just more slick.
@cycmotor
Жыл бұрын
Thanks for the feedback. We're currently working on bringing this to production.
I'm thinking you should include a reinforcement plate to add on the frame with the kit. 👍😁
I'd love to install one. If I could get one to ship!
can you dial the cyc x1 to 1500watts i wanted the stealth but figured I'd just get the stronger model and dial things down for the motor but also chain, cassette & drive train wear love the video 🤘
Can you explain the modes please? By example does mode 1 restrict top speed to 32 km/hr to comply with radar?
2:00 the manual says for 73mm bb to put both the 7mm and 3mm spacer on the non drive side. Why are you doing it differently ?
Big Fan of the build... question regarding the 2mil steel plate... where to buy? ... Thanks
Can we see more footage of this in action?
What types of battery’s are compatible with this motor
How do you secure the twist throttle i can't find directions on that?
Was wondering if anyone could help me with this motor throttle worked for about 5 seconds now just makes a spinning sound Little to know communication with the company
do your batteries last longer than cyc's? looking to use as a delivery bike...?
I’d love to know how much noise it creates.
@cycmotor
Жыл бұрын
Noise comparison coming soon
Patiently waiting for a video showing the noise this motor makes. It is supposed to be improved, but I can't find a video of what it sounds like now anywhere. The noise of the previous generation was the only thing holding me back from buying it.
Total weight with battery?
GEN2에 GEN3의 기어 BOX가 호환이되는지요? GEN2 소음을 줄이고싶어요 정말 ㅠㅠ
Hi, this new Gen dont have specs for battery on site, i have the specs for the BAC855 Controller but i want to make a pack 72v 30ah for the new Gen3 can you guys give me some notes?
@cycmotor
Жыл бұрын
You can find the controller specs here: www.cycmotor.com/next-generation-electronics If you still need something, just send us a message either on email or social media. We generally reply within 24 hours.
Thinking about upgrading from 750W Bafang BBS2. I know this is super powerful which I want. But I would also like a motor that I can breeze around at very slow speeds too. Like 8-14 mph. Do you feel that the motor checks both boxes in that regard? Or is it just for racing around fast?
@cycmotor
Жыл бұрын
You can set the power lower through our app. No problem going slow at all. You can even set it to street legal settings like 250W.
@youtube7076
9 ай бұрын
be ready for THE NOISE, COMPARED TO THE BBS ITS VERY loud..
궁금한점 크랭크암 분리공구는 어떤 걸 사용합니까?
Is there a maximum size chainring that can be fitted with this and likewise with the new Stealth? Obviously, there might be chainstay clearance issues depending on the frame.
@cycmotor
Жыл бұрын
Hi Anthony, the X1 Pro can fit at the largest a 48T chainring & the X1 Stealth can fit a 46T chainring. Unfortunately, we do not have these sizes available but you can swap the inner chainring with any standard 104 bcd chainring (steel recommended).
@anthonyward5329
Жыл бұрын
@@cycmotor thank you
@anthonyward5329
Жыл бұрын
Looks like the new CYC Photon may be a better option for a speed pedelec commuter type conversion? Can still be pedalling under power at higher speeds with a 50T chainring option. Is there any reason why a standard (rather than compact) 52T or 53T big ring couldn’t be fitted?
@v1ncen715
Жыл бұрын
@@anthonyward5329 The sprockets are not BCD standard on the photon check kzread.info/dash/bejne/h4ClmbibeqicaKQ.html With this shape, I doubt we can ever find an adapter to used BCD chainrings unfortunately...
when do you plan on selling the kits with X12 controller / 5kw version?
@cycmotor
Жыл бұрын
Soon soon ;)
What is the torque value for the 16 notch 44mm bottom bracket? Is it 30 Nm? 36Nm?
@arunmalik435
7 ай бұрын
40-50nm written in user manual
When are they shipping? I've been hearing there are delays. I have a kit pre-ordered through a vendor.
@Rickydbaby
Жыл бұрын
Still waiting? How long did it take?
@mrdanlai
Жыл бұрын
@@Rickydbaby I received my kit in February. My original order was in Sept 2022, with the 3rd party vendor was for the gen 2 kit, but the gen 3 kit was announced shortly after, so I worked with the vendor to modify the order to ship the gen 3 kit instead, so it became a pre-order. Coincidentally, yesterday I had some time to start the install on my bike, so far it's been a breeze. Need to clean up the wiring, mount the battery, fine tune the settings, and figure out how to extend the speed sensor, the wire is way too short for my bike.
@mrdanlai
Жыл бұрын
@@Rickydbaby Also, just to mention, I ordered the 120mm kit, so that in itself had more delays due to CYC manufacturing for this size.
@Rickydbaby
Жыл бұрын
@@mrdanlai wow that is a long wait. I won't be able to wait that long. I'll give it a few weeks to see if an order ships. Hoping for the best.
@mrdanlai
Жыл бұрын
@@Rickydbaby Yeah, I mean it was a pre-order at the time, so the wait is going to be longer. I imagine if ordered now/recently, it should have shorter lead times, but only CYC knows. I could have stayed with the gen 2 kit, but I like to have the "latest and greatest", haha ;)
Is there break or gear sensors available?
@johnsmith-zv1lo
7 ай бұрын
yes
@courtneybass9153
7 ай бұрын
I tried this motor for a month. I preferred the bbshd with bac 855. Much better. And if anything breaks I won’t have to wait weeks for CYC to send out a replacement part. Stress free riding considering all the failures I heard about on the facebook groups
gen2와 소음비교는??? 많이 조용해졌는지???
@cycmotor
Жыл бұрын
It is noticeably quieter than the Gen 2. We will release a noise comparison soon :)
You guys ship from US warehouse ?
@cycmotor
Жыл бұрын
Hi Eli, we have dealers in the US that you can contact to ship from their facilities but if you purchase from our website, at the moment, we will ship from Hong Kong. www.cycmotor.com/dealers
This was most detailed installation.. seems will suffer same as bafang becoming loose over time?! Unless lekkie makes one lock ring??!!!
@cycmotor
3 ай бұрын
Hi there, what other details would you like to see in an installation video? We'll do our best to include it in the Gen 4 installation video.
what is the name of the battery?
@cycmotor
6 ай бұрын
The battery used in the video is custom made for the frame.
It seems you have deleted our message that was left here 2 days ago?? why?? TramuntBike Mallorca here again.. We have asked by email... by leaving a message here.. Is there something up that you cannot reply to us?? We are waiting patiently on some sort of reply...We require an invoice emailed over to us for the €2,000 we partied with at start of last week...I'm beginning to think ther eis a problem with CYC???
@cycmotor
Жыл бұрын
Hi Martin, we have not deleted any messages from you. Could you possibly resend it please? We have also answered your emails accordingly. If you're not receiving anything, please let us know. You can also reach us via social media (facebook or instagram). Unfortunately, we do not answer youtube comments daily at the moment.
Get that extra chain under something so it doesn’t look junky!
@-joo3033
Жыл бұрын
"junky"...mehh its not a real problem.
needs torque sensing on all models
@-joo3033
Жыл бұрын
"needs" as if you cant do it already ? surely you can just set it up woth the phone app.
@VietPho
Жыл бұрын
The x1 gen3 doesnt have torque sensing?
@-joo3033
Жыл бұрын
@@VietPho it has torque sensing...
Quanto é
@cycmotor
Жыл бұрын
Hi there, you can find the options and pricing here: www.cycmotor.com/product-page/x1-pro-gen-3-3000-5000w-mid-drive-conversion-kit or you can look for a dealer in your area: www.cycmotor.com/dealers