I want ride modes like boost, trail, eco, walk. How does this work? Whats it like using it?
@stalker1567Күн бұрын
Can i get the standard ride modes on this? Boost, tral, eco, walk?
@stalker15672 күн бұрын
What ridr modes does this have? Ie boost, trail, ecco, walk? Also what torc is torque is it.
@stalker15672 күн бұрын
What are the oprions on the control? Ie trail, boost, eco, walk?
@ericthedesigner3 күн бұрын
7-28-2024 I commute 30 miles a day minimum and this motor is crazy good. I love the sound dual chains make on bikes, such a nice harmonic. Some people have commented about the motor noise. Any 6K motor makes noise, the more power the more noise, But I assure you all you are going to hear is the dual chains. Unless you run belt drive.
@derekgb19713 күн бұрын
Where did wheel diameter go?
@manickbarry6 күн бұрын
I’m thinking about getting one of these but I know nothing about bikes, what difference does the chain ring sizes make?
@MikeSuding-4 күн бұрын
A smaller chain ring on the front makes it easier to pedal up hills. Or, you can get a bigger rear sprocket to make it easier. A larger chain ring up front conversely makes it harder to pedal (for flat or downhills).
@ghostedyoutuber2636 күн бұрын
I recommend a short visit to a dermatologist and have them use a little liquid nitrogen where appropriate.
@igypop.7 күн бұрын
When are you guys going to get rid of the 219H chain and utilize belt-drive for the primary?
@angelpalacio528711 күн бұрын
Mi pregunta es 😮 en dónde lo puedo comprar en línea y que sea seguro?
@hindesite11 күн бұрын
Thanks Cathy, looking forward to the more detailed video on assist settings. Thanks for your help too, I'm stoked with how the Photon performs on my setup, it is really successful.
@SUPAWAVE4LIFE13 күн бұрын
hey how did you remove the 11teeth sprocket?. any guide im trying to get my one off but it seemsstuck
@MartinAlva16 күн бұрын
I have a 2023 Scott Genius 920. I'm having a hard time figuring out if this will fit that frame. I plan top get a Gen 4, BB92.
@lewiswhitwell686920 күн бұрын
I thought the X1 Pro Gen 4 would be good but the grip and full Throttle mounts are terrible, if throttle is too tight the throttle will stay in the open position and become stiff to the point you have to move it manually back to the closed position and it still moves forward and back. If it's loose enough the throttle has a spring to it, so it goes straight back from the open position to the closed in an instant but is worse becuase it moves forward and back for the entire throttle and grip more than if it was tightent. Such a stupid design and a waste of money for the grips
@lewiswhitwell686920 күн бұрын
Haven't even had the chance to ride the kit, an I'm disappointed
@6789uvrvrvtvtb20 күн бұрын
what bike and battery did you use for the full suspension test bike? looks insane
@HighVoltageKits21 күн бұрын
Good stuff
@etiennemuller121 күн бұрын
I’m using the X-1 - Stealth (first generation), with the X6 Controller upgrade. Apart from some speedometer inaccuracy, it is working just fine. I am wary of updating firmware, in general, on the basis of, if it ain’t broke, don’t try to fix it. My question… Are the firmware updates going to be glitch free with my Stealth Gen 1 - X6 controller combination?
@axlimaging21 күн бұрын
Excellent overview, very much interested to see a detailed look at PAS settings combined with levels/modes for real-world riding.
@xavierjean302315 күн бұрын
i also do, i just received a new x12 and my pas setting are feeling so damn wrong now, it for sure has to do with the base voltage, wich doesnt work with the wizard set up.
@walterpetersen721722 күн бұрын
Is there a way to setup 5 or 9 assist levels instead of the default 3 on the Photon? This would be a nice feature.
@cycmotor21 күн бұрын
Yes there it. You can set it up in your display's main menu on either the SW102 or DS103.
@hindesite13 күн бұрын
This setting was referred to as "Gears" in the SW102 settings menu, BUT initial reports were that the scaling of power and torque settings was quirky. This may have been fixed by now.
@censorshipBS22 күн бұрын
Can you do an update so i can switch between street and race without having to turn off the display on the Sw 102 ?
@cycmotor21 күн бұрын
Yes, the latest display firmware (released 2 July), supports this function. Contact our technical support team for more details on this www.cycmotor.com/contact-us
@dougl616022 күн бұрын
The lowest suggested battery voltage would be very useful. I was away from home with steep hills in the path, and the minimum voltage level shut off the motor. I probably set the minimum too high.
@cycmotor21 күн бұрын
The minimum voltage will depend on your BMS as well as your cell type. It could be that your BMS was set high as well. Best to check both if possible.
@cilami22 күн бұрын
Thanks for the video. Which is the link regarding the minimum voltage?
@cycmotor21 күн бұрын
This one: www.cycmotor.com/post/setting-up-your-battery-for-x-series-controllers
@_sibbz_865722 күн бұрын
Looking forward to the more in depth video😄
@paulchambers96923 күн бұрын
How can i use cyc isis spindle on my 83 shel without right side cup or mptor install. Left side i just use euro 25 mm bearing but right side no spot for bearing on cyc spindle. Is there some type of external bb with double row bearings ?
@beforedeth210424 күн бұрын
So with the biggest battery possible let’s say 5-600$ how far can I make it on one charge? Want something powerful to ride 15 miles to college and back
@kawana196129 күн бұрын
I'm waiting for mine and can't stop watching those videos~!
@freextr29 күн бұрын
The REAL surron killer
@thymecapsule619Ай бұрын
Is it too much to ask for a frame too? Id like to convert polygon siskiu t7 but i wonder how many ah i could fit on the downtube on 72v … id really love to be able to hit that 30ah ish to have really nice all rounder go everywhere commuter . However the full sudpension bikes have little space on the frame i desperately await someone who will think of this when making trail fs frame .
@bradarmstrong1656Ай бұрын
This is a great video. Very informative. I really like how simple and clear this video is. It shows the elegant design/construction or the Photon. It all appears rugged, but it still can be repaired if necessary by the owner.
@leeuwzorgenburg8736Ай бұрын
Ek is lief vir jou
@kyledeporiss9469Ай бұрын
The cassette was the issue I was running into with my Gen 3 I have on right now. I’m limited to a very small amount of gears or my chain line will become curved
@Ray-dz9fnАй бұрын
Can statorade be added to assist cooling the motor?
@thymecapsule619Ай бұрын
looks slick. cannot wait for a 72v 20ah ish option for a true beast !
@bigballa8220Ай бұрын
Hello CYC, is it a difference with torque or handling when using the thumb throttle compared to full twist?
@MonkeybreadXАй бұрын
What trek bike was that? And is the chainline still straight?
@zfentyАй бұрын
The 10Ah is $488 + shipping to the US $137 = $625.00
@dougl6160Ай бұрын
Exquisite engineering. I definitely used anti-seize paste (Permatex) when assembling the unit, especially on aluminum to aluminum threads.
@avinashrajkumar356Ай бұрын
The cell phone mount is so neat and tidy. 5:51 it also swivels to landscape 😍 Does anyone know the manufacturer of this cellphone mount?
@CamdenWallraffАй бұрын
If I wanted to just replace the motor itself, what is the actual size of that unit? It looks to be a 6880 i'm guessing?
@DoubleBluffingАй бұрын
Great video
@EBIKESBRАй бұрын
Muito bom!!
@user-nc8do1yd4zАй бұрын
а где аккумулятор?
@yohvhАй бұрын
you should really just create 1-3 prebuild mtb frames for sale. using this setup. so one doesn't have to figure out and install everything.
@caraqalАй бұрын
What a cool solution for the small chainring! And a beautifully integrated system overall! Top notch engineering! And thanks for going in depth about the motor. I've put the Photon on my cargo Bullitt and it is absolutely wonderful, it's as if both the motor and the bike were buit for each oher! But I'd like to take a chance here to voice that I myself and dare I say many other would like to see more trust in the end user and more repair capability! Motor side bearings for example are not available as replacement part in your store, same with any more advanced part, like the torque sensor. You are miles better than your direct competitor Bafang, and yet I feel that if anything happens to the motor I will be left with an expensive paperweight - shipping for repairs is just not a viable solution from Europe to HongKong! Meanwhile one could requild the whole BBS01 with spare parts available. Perhaps I am naive but I do hope you will take into account user opinions such as my own! Thanks for the great presentations and product!
@lepokity765Ай бұрын
Frankly, I'd love to purchase your product for instance Foton. However, the produce is still raw and I see people complain regarding the power issues and so on. Comparing your product and Bafang I'd prefer the second one due to its reliability. I'm not going to make a complaint from my side because I didn't use it. But the reviews are not in a good light. Maybe quality is good but it is what it is. Sorry guys, it's only my opinion. Whether you could persuade me that it is not true or myth or fiction then I'd love to make a purchase even in two times more than Bafang. Thanks beforehand
@jackserna3440Ай бұрын
If the motor heat is trapped inside, can't you just put thermal pads or thermal paste in between the outer shell and motor shell so that the heat can properly transfer to the outer shell and dissipate through the fins? Is CYC doing this going forward?
@jackserna3440Ай бұрын
If the motor heat is trapped inside, can't you just put thermal pads or thermal paste in between the outer shell and motor shell so that the heat can properly transfer to the outer shell and dissipate through the fins? Is CYC doing this going forward?
@aspunkyyacker6850Ай бұрын
Good vid, both looks really great. Please work on your riding because you cant jump for shit 👍
@keithallen6504Ай бұрын
I'd like to pull the trigger on a Photon but I have a lot of reliability concerns like: why are there not any reviews never than 11-12 months? Reviews in general are sparse for mountain applications. What about parts? It's a major PITA getting Bafang parts and they've been around longer than CYC - what happens when you need gears and hard to get parts?
@dougl6160Ай бұрын
The KZread "CYC Owners Group" shows many MTB builds, all the mud on the bikes indicate they are really abused, erm, I mean enjoyed.
Пікірлер
I want ride modes like boost, trail, eco, walk. How does this work? Whats it like using it?
Can i get the standard ride modes on this? Boost, tral, eco, walk?
What ridr modes does this have? Ie boost, trail, ecco, walk? Also what torc is torque is it.
What are the oprions on the control? Ie trail, boost, eco, walk?
7-28-2024 I commute 30 miles a day minimum and this motor is crazy good. I love the sound dual chains make on bikes, such a nice harmonic. Some people have commented about the motor noise. Any 6K motor makes noise, the more power the more noise, But I assure you all you are going to hear is the dual chains. Unless you run belt drive.
Where did wheel diameter go?
I’m thinking about getting one of these but I know nothing about bikes, what difference does the chain ring sizes make?
A smaller chain ring on the front makes it easier to pedal up hills. Or, you can get a bigger rear sprocket to make it easier. A larger chain ring up front conversely makes it harder to pedal (for flat or downhills).
I recommend a short visit to a dermatologist and have them use a little liquid nitrogen where appropriate.
When are you guys going to get rid of the 219H chain and utilize belt-drive for the primary?
Mi pregunta es 😮 en dónde lo puedo comprar en línea y que sea seguro?
Thanks Cathy, looking forward to the more detailed video on assist settings. Thanks for your help too, I'm stoked with how the Photon performs on my setup, it is really successful.
hey how did you remove the 11teeth sprocket?. any guide im trying to get my one off but it seemsstuck
I have a 2023 Scott Genius 920. I'm having a hard time figuring out if this will fit that frame. I plan top get a Gen 4, BB92.
I thought the X1 Pro Gen 4 would be good but the grip and full Throttle mounts are terrible, if throttle is too tight the throttle will stay in the open position and become stiff to the point you have to move it manually back to the closed position and it still moves forward and back. If it's loose enough the throttle has a spring to it, so it goes straight back from the open position to the closed in an instant but is worse becuase it moves forward and back for the entire throttle and grip more than if it was tightent. Such a stupid design and a waste of money for the grips
Haven't even had the chance to ride the kit, an I'm disappointed
what bike and battery did you use for the full suspension test bike? looks insane
Good stuff
I’m using the X-1 - Stealth (first generation), with the X6 Controller upgrade. Apart from some speedometer inaccuracy, it is working just fine. I am wary of updating firmware, in general, on the basis of, if it ain’t broke, don’t try to fix it. My question… Are the firmware updates going to be glitch free with my Stealth Gen 1 - X6 controller combination?
Excellent overview, very much interested to see a detailed look at PAS settings combined with levels/modes for real-world riding.
i also do, i just received a new x12 and my pas setting are feeling so damn wrong now, it for sure has to do with the base voltage, wich doesnt work with the wizard set up.
Is there a way to setup 5 or 9 assist levels instead of the default 3 on the Photon? This would be a nice feature.
Yes there it. You can set it up in your display's main menu on either the SW102 or DS103.
This setting was referred to as "Gears" in the SW102 settings menu, BUT initial reports were that the scaling of power and torque settings was quirky. This may have been fixed by now.
Can you do an update so i can switch between street and race without having to turn off the display on the Sw 102 ?
Yes, the latest display firmware (released 2 July), supports this function. Contact our technical support team for more details on this www.cycmotor.com/contact-us
The lowest suggested battery voltage would be very useful. I was away from home with steep hills in the path, and the minimum voltage level shut off the motor. I probably set the minimum too high.
The minimum voltage will depend on your BMS as well as your cell type. It could be that your BMS was set high as well. Best to check both if possible.
Thanks for the video. Which is the link regarding the minimum voltage?
This one: www.cycmotor.com/post/setting-up-your-battery-for-x-series-controllers
Looking forward to the more in depth video😄
How can i use cyc isis spindle on my 83 shel without right side cup or mptor install. Left side i just use euro 25 mm bearing but right side no spot for bearing on cyc spindle. Is there some type of external bb with double row bearings ?
So with the biggest battery possible let’s say 5-600$ how far can I make it on one charge? Want something powerful to ride 15 miles to college and back
I'm waiting for mine and can't stop watching those videos~!
The REAL surron killer
Is it too much to ask for a frame too? Id like to convert polygon siskiu t7 but i wonder how many ah i could fit on the downtube on 72v … id really love to be able to hit that 30ah ish to have really nice all rounder go everywhere commuter . However the full sudpension bikes have little space on the frame i desperately await someone who will think of this when making trail fs frame .
This is a great video. Very informative. I really like how simple and clear this video is. It shows the elegant design/construction or the Photon. It all appears rugged, but it still can be repaired if necessary by the owner.
Ek is lief vir jou
The cassette was the issue I was running into with my Gen 3 I have on right now. I’m limited to a very small amount of gears or my chain line will become curved
Can statorade be added to assist cooling the motor?
looks slick. cannot wait for a 72v 20ah ish option for a true beast !
Hello CYC, is it a difference with torque or handling when using the thumb throttle compared to full twist?
What trek bike was that? And is the chainline still straight?
The 10Ah is $488 + shipping to the US $137 = $625.00
Exquisite engineering. I definitely used anti-seize paste (Permatex) when assembling the unit, especially on aluminum to aluminum threads.
The cell phone mount is so neat and tidy. 5:51 it also swivels to landscape 😍 Does anyone know the manufacturer of this cellphone mount?
If I wanted to just replace the motor itself, what is the actual size of that unit? It looks to be a 6880 i'm guessing?
Great video
Muito bom!!
а где аккумулятор?
you should really just create 1-3 prebuild mtb frames for sale. using this setup. so one doesn't have to figure out and install everything.
What a cool solution for the small chainring! And a beautifully integrated system overall! Top notch engineering! And thanks for going in depth about the motor. I've put the Photon on my cargo Bullitt and it is absolutely wonderful, it's as if both the motor and the bike were buit for each oher! But I'd like to take a chance here to voice that I myself and dare I say many other would like to see more trust in the end user and more repair capability! Motor side bearings for example are not available as replacement part in your store, same with any more advanced part, like the torque sensor. You are miles better than your direct competitor Bafang, and yet I feel that if anything happens to the motor I will be left with an expensive paperweight - shipping for repairs is just not a viable solution from Europe to HongKong! Meanwhile one could requild the whole BBS01 with spare parts available. Perhaps I am naive but I do hope you will take into account user opinions such as my own! Thanks for the great presentations and product!
Frankly, I'd love to purchase your product for instance Foton. However, the produce is still raw and I see people complain regarding the power issues and so on. Comparing your product and Bafang I'd prefer the second one due to its reliability. I'm not going to make a complaint from my side because I didn't use it. But the reviews are not in a good light. Maybe quality is good but it is what it is. Sorry guys, it's only my opinion. Whether you could persuade me that it is not true or myth or fiction then I'd love to make a purchase even in two times more than Bafang. Thanks beforehand
If the motor heat is trapped inside, can't you just put thermal pads or thermal paste in between the outer shell and motor shell so that the heat can properly transfer to the outer shell and dissipate through the fins? Is CYC doing this going forward?
If the motor heat is trapped inside, can't you just put thermal pads or thermal paste in between the outer shell and motor shell so that the heat can properly transfer to the outer shell and dissipate through the fins? Is CYC doing this going forward?
Good vid, both looks really great. Please work on your riding because you cant jump for shit 👍
I'd like to pull the trigger on a Photon but I have a lot of reliability concerns like: why are there not any reviews never than 11-12 months? Reviews in general are sparse for mountain applications. What about parts? It's a major PITA getting Bafang parts and they've been around longer than CYC - what happens when you need gears and hard to get parts?
The KZread "CYC Owners Group" shows many MTB builds, all the mud on the bikes indicate they are really abused, erm, I mean enjoyed.
I love Hong Kong ~~