Started venge watching your channel until the GD word came Along I'm out ‼️‼️sad‼️‼️

@rcguygarage

4 ай бұрын

What the f*** is a GD word 😂🤣😂🤣

@ofnaguycarlwatts8602

4 ай бұрын

@@rcguygarage God .... Not gonna say it myself 😂😂

@rcguygarage

4 ай бұрын

@ofnaguycarlwatts8602 are you afraid that you might be STUCK DOWN by the all mighty? It's too bad that you don't think that I am with God by simple words however YOU are not the final judge. That is up to the Creator. 👍💯

@ofnaguycarlwatts8602

4 ай бұрын

@@rcguygarage Nope not at all.i don't like it when someone cussed God.its a damn Rc car no reason to put his name in Vane bc of an RC car .to me it's mighty dumb.yeah I'm only 1 person but promise you i would have given you 💯 S or even thousands of watch hrs.have fun cussing God over an RC car 😂😂

@rcguygarage

4 ай бұрын

@ofnaguycarlwatts8602 Yes but that's also why you are welcome to your own biblically trained opinion and you're free to do so. It's your God Damn given right to do whatever makes you happy as long as you are not hurting someone else doing it. As far as your comment about hundreds or thousands of hours of watch time you really know that that doesn't matter. This is just KZread It has nothing to do with everlasting life. 👍💯

I appreciate the message at the end, guy. You lay it out, unlike some other KZreadrs that shill and still try to maintain that there's no bias. It should be completely out in the open, that way you can take it with a grain of salt.

I really like the honesty and the no B.S that you post. Too many people try to hide the truth. So thank you

Nice job Guy! Very smart observation. Hopefully they listen snd fix it. Those exposed parts are definitely a problem as well. I like the truck body a little better, but its kinda weird looking as well. Could you cut bigger holes in another body and use it with that mounting system?

@rcguygarage

4 ай бұрын

Already did that👍💯 posted the other day on here.

*_😢WOV is listening to feedback, and working on many revisions for the V2!_*

@rcguygarage

4 ай бұрын

We'll see what's being listened to and what changes are made if any. The SLAP SELL of this MT was the wrong direction to take.

@SOMNIOHM

4 ай бұрын

​ @rcguygarage _"Slap Sell" is a bit harsh, this RC was NOT pushed out to consumers prematurely as a means of "cash grab"._ *_The owner of WOV has good intentions, and we as the consumers should stay excited to see what the future for the company will hold!_*

@rcguygarage

4 ай бұрын

@SOMNIOHM slap sell is an appropriate statement for the out of the box initial experience of the MT version. As said things change later when the slap sell is removed from the picture.

@SOMNIOHM

4 ай бұрын

@@rcguygarage .. _These first 2 vehicles are also the brainchild for WOV!_ _Being "the new kid on the __-chopping-__ block" here as you would call it, I think what we have here is 2 very new, very unique platforms that are essentially breaking the mold. They are not like anything else out there in their own right anyway. SURE they may have many areas that need improved upon! As we all know.. NO RC is perfect! What they did do right out of box was killer electronics, and both vehicles handle incredibly! (FOR AN OUT OF BOX RTR) I beg you to go find better.. you cannnnnot!_ _Arrma is on whaaaaat... V5 to damn near V5.5 of the KRATON!?!?!?_ _WOV has came out absolutely swiiiingin' FOR US the consumers, and after the kingpins Traxxas & Arrma here in 2024! For this.. I praise them, I love this, and I am here for it!_

@rcguygarage

4 ай бұрын

@@SOMNIOHM very well said👍💯

I’m thinking the kaiju tires

Shock towers look to narrow, with the shocks to close together. At to steeper angle on the shocks.

Guy I'm am so happy you said that thing looks funky 🤣 because I am sorry but that thing is fugly lol from the first time I seen it I knew changes were going to need to be made. Love the content Guy.

I ran mine for the first time today and during the run it was making a grinding sound it looked to be the center differential making the sound any thoughts?

I don't think there's anything nefarious going on there. Just lack of testing which is becoming more obvious since returning to the hobby. I already fell for the "ooh pretty body" RC with the Bonzai drift truck. It's kinda like this, a new startup company cloning the bigger guys but with their own little touches. I'm all for it if the cars work and customer service is good. Look at Rlaarlo, out there killin' it right now. Freakin' Bonzai though... I emailed the guy about wheels months ago and 👻ed! 😆

@rcguygarage

4 ай бұрын

The thing I question though on your comment where is the "cloning" on this? Just curious because you made that statement. 👍

@scaleworksRC

4 ай бұрын

@@rcguygarage Take your pick from any of the big 3. They all copy each other too!

@rcguygarage

4 ай бұрын

@@scaleworksRC okay but at what point is it not cloning and just making an RC? It's got to be tough to deal with patents infringement. I know you know what I'm getting at You have to.

@scaleworksRC

4 ай бұрын

@@rcguygarageNot really Guy.. I'm just out here having fun. How bout you?

@rcguygarage

4 ай бұрын

@@scaleworksRC having a TOTAL BLAST GUY

Longer arms, taller towers. Longer shocks. I see it. KaIjU tIrEs On EvErYtHiNg 😂. It’s little oversights by WOV that can be easily revised (should of been) This is why these videos are good. You have both you can compare and share

@rcguygarage

4 ай бұрын

KAIJU THE WORLD

They might make the finest monster truck ever made one day I like everything about the truck I’m going to buy two of them

@rcguygarage

4 ай бұрын

😳😲

@rickykonoloff5047

4 ай бұрын

@@rcguygarage I just love how the car is so over built and I think they’ve more than deserve a chance love the videos keep up the good work

The buggy was well designed. Some marketing idiot in upper management made the truck. I will bet you the farm the engineer warned them. Fallen on deaf ears.

ZD Racing 9116 MT tyres.!

Kaiju tires

I bought the same paddle tires and tried them on my landslide. The landslide tires did better in the snow. but the paddles work great on 10th scale monster trucks. But yeah, they really just made the buggy and slapped bigger wheels on it. 😂

@rcguygarage

4 ай бұрын

Aka it's got a serious case of the SLAP SELL

Hey guy you know jt the youtuber? Well he got traxxas maxx shocks and put them on and I think it helped can't remember.

@rcguygarage

4 ай бұрын

Yes I know who JT is. He's seemingly a good guy. People have told me that he has put Traxxas Max shocks on. Prior to this I had already measured out every RC that I have for fitment and in my world my Traxxas Max V1 and V2 the shocks 100% do not correctly work and do not fit as a drop in. So I don't know what he did but that's not the real resolve. I feel the better resolve is different that is just my opinion.

I wonder if it would be a possible fix to fabricate a shock top extension bracket. I guess the Tyrants was the main focus for the design team and the Blitzkrieg was an after thought.

@rcguygarage

4 ай бұрын

That's what I'm seeing👍💯

Well actualy I like that it does not bottom out when the shocks are fully compressed and hate a car that hits bottom after a jump, it must be rolling on its wheels nomatter what for me, so honestly I realy like that truck exept for the wheel struts touching the boddy, that for me is a huge no no as with you 👍, but it can be modified I spose though I don't like that either, but yeah I think the buggy is still a better option 👌

@rcguygarage

4 ай бұрын

Things change later down the road couple more videos but that's showing the process.

@frednel4326

4 ай бұрын

@@rcguygarage awesome thanks bro, ur videos are great so bring em 👌

People have fixed shock problem by using traxxas max shocks, which are fixing the problem well a guy went quite crazy at skate park using max shock and the truck held up well. Those shocks are weirdly clipped at bottom rather than screw in. Put green max shocks on go again. Also trim body slightly. Hope it helps.

@TheflyingkiwiRC

4 ай бұрын

That was JayTee and the Maxx shocks were too long and made the car bounce to much. They need to be shortened.

@richardhutchinson9646

4 ай бұрын

​@TheflyingkiwiRC Yeah bounced a bit but it was a massive improvement still. 🤔 measure shock length, then find some a just a couple of mil longer. I don't actually know the length of them but can see they're short. Maybe kraton 1/10 gorgon shocks perhaps.

@rcguygarage

4 ай бұрын

Wow that's great for whoever fixed whatever issue they were having. Unfortunately on my end I've measured and checked multiple shock lengths and the Traxxas Maxx that I have (both of them V1 and V2) No way in hell would I put those shocks on this truck. They are way too long. So I don't know what got fixed with what. There's a lot more missing in the information that you gave as well. The hardware used for a Traxxas Maxx shock is not as built as the WOV So I'm not sure what you mean 🤷. Thanks for the info anyway.

@richardhutchinson9646

4 ай бұрын

@rcguygarage The shock bottoms the eyelet part if you will, isn't threaded they aren't screwed on like with most shock, they just just have one grove, on the shock rod and are molded on. Rather than full thread. So hard impact the bottom is pulling off that one little grove is the only that's holding it on. It's a big design flaw in the shocks.

@q60nyc90

4 ай бұрын

Arrma 4s kraton shocks fit also

I had to shave off the finder’s on both sides. Also don’t like the head lights on it looks cheaper then other brands. But was a easy fix I replaced them better looking head light and grill

Ya guy oh ya full trigger

@rctezluh42069

4 ай бұрын

full stinkin' triggahh

Can you 3d print out longer arms to try out?

Hey guy , got a quick question, is the stock esc, able to be programmed? Punch, etc etc. great video brother, definitely picking up the buggy now, thanks to your videos 😉👍🏽💯

@rcguygarage

4 ай бұрын

Not at the moment, I've asked tough and it might be a possibility just not for now. Got to say the MT version is kicking some serious butt now that I squared away the tire/wheel issue😜👍💯👊

Its still a good product.

@rcguygarage

4 ай бұрын

Oh it turns out to be STELLAR

@TheThetruthmaster1

4 ай бұрын

​@rcguygarage if it's almost 1/8 why isn't it 6s?

Do you think fuel tubing shock bump stops would help ?

@rcguygarage

4 ай бұрын

As bump stops maybe but that would further limit the travel

I’m sure many have their own opinions but bottoming out on the shock is fine … I always put bump stops … it’s that crazy angle 📐 on shocks creating too much stress…

@rcguygarage

4 ай бұрын

Well said and being a buggy the angle is fine but introducing the extra width is where they screwed up and not changing the angle. I semi-agree and disagree with what you said about the shocks. Shocks in reality are supposed to soak up everything but that's also why they have something called a jounce bumper which is exactly what you were talking about They do not have this on the shocks and that is a negative maybe placing an o-ring there or two would help but even that wouldn't last very long

@nofreerides7033

4 ай бұрын

Yes an oring or 2 wouldn’t hurt but like you said in vid … the tires absorb shock too … and flex in plastic a arms also help as well … I think it’s not too much a concern that it doesn’t bottom out … personally I’d prefer that it doesn’t… thanks for the reply 👍👍👍

@rcguygarage

4 ай бұрын

@@nofreerides7033 I try to reply can't catch them all but you took the time so figured I would as well

Kaiju tires is my guess lol

@rcguygarage

4 ай бұрын

😜🤫

Jag Wire

@rcguygarage

4 ай бұрын

JAG-WIRE for the win 👍💯😜

Not sure what all your complaining is about it looks like a pretty good rig

@rcguygarage

4 ай бұрын

Complaining??? 🤣😂

Does it do it like the Big Rock?

@rcguygarage

4 ай бұрын

Yes👍

So all said and done what is the verdict?

I didnt see any issues to make you feel like the truck was a "slap sell" , did they make some miscalculations on suspension geometry ?..sure.. but they seem to have started with the buggy, and made slight changes to offer a "monster truck" I dont own either of them , I havent driven them.. this is just my thoughts after watching all your videos on these RCs, I feel like they made the Buggy, and someone had the idea that they needed to make a truck option , and without having to go down the road of new tooling to redesign the arms and suspension,.. someone said.. "lets just offer it this way, and see if anyone even buys these before we put more money into this" .. Just my 2 cents as an outsider.. I do hope they take Your thoughts and the others who have bought them thoughts on how to redesign the suspension and offer rebuild parts that make it how the people want it, Sitting by waiting for the next Vid :) 😃

@rcguygarage

4 ай бұрын

Nail on the head comment 👍💯 But that's also where a company can FAIL by allowing greed and less R&D come into the picture and infiltrate the original design which I do believe like you said was the buggy. If I receive this truck first which I got them both at the same time so let's just say it this way If I had opened the other box first by the flip of the quarter I would not have been happy and that would have sent me up If this was my only purchase to not be thrilled.

@rcguygarage

4 ай бұрын

By the way that is part of the definition of a Slap Sell 😜👍💯

@crazyivan512

4 ай бұрын

@@rcguygarage lol .. fair enough :)

@Sarah-gi7gy

4 ай бұрын

I bought two of the trucks and they’re both broken with no parts support. I’m pissed.

@crazyivan512

4 ай бұрын

Very Typical of lower priced "off brand" new RC releases, and some "big brand" new RC releases, they release the vehicles without much part support until months or more later, that is a part of doing the homework before buying to make sure they are easy to contact, and there is replacement parts available immediately upon purchase, since we all know even the high end very durable RCs are going to need some kind of replacement parts eventually.. If they get driven

get a LG

Oh yea here we go. Let’s see this thing.

Which is why you shouldn't buy no name unfamiliar junk. Even known companies like ARRMA and Traxxas have design flaws or crappy plastic chassis held together in the middle by 2 screws.

@rcguygarage

4 ай бұрын

🤣😂🤣😂 you either do like I do and comment as you go or DIDN'T WATCH TILL THE END😜

Thanks for this video. One time, I'm glad to be poor and couldn't jump on a quick purchase.

Thanks for not showing us what tires you switch to. LOL

@rcguygarage

4 ай бұрын

Your very welcome🤣😂 video was too long

@tobybennett6582

4 ай бұрын

@@rcguygarage LOL well you asked if we knew what they were and I got a glimpse of them but you never did say. I was curious

@rcguygarage

4 ай бұрын

@@tobybennett6582 😳that's TODAY'S video 😜

Shock angle is horrible!

@rcguygarage

4 ай бұрын

Box for Box the buggy is where it's at👍💯

As soon as his slash maxx comes that wov racing is gonna collect dust and a few other😂😂😂

Not hating but the term “German engineering “ is hollow means nothing . If it had said “Designed in Germany “ that would mean more. Marketing’s 😂

@rcguygarage

4 ай бұрын

You mean the toothless, homeless hermit that designed the German Bomb means nothing😳🤣😂🤣😂🤣😂

@Zipbass

4 ай бұрын

@@rcguygarage maybe the nasa ones 😂 tbh most axis powers benefitted from that. Have to watch what words the Chinese factories wording used , same as the CE and C E marks ones certified for Europe the others Chinese export 😂 just the slight difference in spacing makes it look like the Europe certification. It’s good your being transparent and not controlled

@rcguygarage

4 ай бұрын

@@Zipbass come on guy everything's made in USA CHINA You know that they renamed one of their cities right to USA 🤣😂🤣😂 that way you can say made in USA 👍💯👊

So glad I opted for the tyrants instead 🎉 , carnt believe same arms are on both trucks 🛻, v2 I feel on this one ☝️

@rcguygarage

4 ай бұрын

Things change for the better but out the box YEAH do better