Thank you great suggestion about using generic cord. I appreciate you explaining it like some of us don't understand the whole process. You did an excellent job!

@JimMcLaren1950

2 ай бұрын

Your welcome. Thanks for posting. Good to know my whole process was helpful. You made my day.

@tigolbiddies4d155

Ай бұрын

Agreed. I watched a shorter video first and got nowhere.

Watched so many videos but after watching your video, no need to watch any video. Very easy to understand, you made it so clear. Especially when nylon wire to be tied in opposite direction on spool and then to twist it to clockwise direction, nobody did like you. I wanted to see how to insert in that hole. You put it in opposite direction then turned towards clockwise. This is called thorough detail. Thanks again my friend. Have a wonderful long weekend

@JimMcLaren1950

9 ай бұрын

Your welcome. Glad my video helped. Enjoy your long weekend.

Thank you for the helpful video. I went through several other videos on KZread that only talked about how to replace the spool with a new one. I'm glad I found yours!

@JimMcLaren1950

Жыл бұрын

Your welcome Glad you found my video. Glad my video helped

Thank you for solving my problem threading the spool!

@JimMcLaren1950

16 күн бұрын

Your welcome.

Thank you so much. I had to watch a lot of videos before I found yours. Your video is clear and concise and easy to see, easy to understand. Thanks again!

@JimMcLaren1950

Жыл бұрын

Your welcome. Glad my video was clear and concise and easy to understand. I try hard to make good videos. Nice to know that its appreciated.

The 'Free trimmer string for life' is misleading, as the shipping for the replacement spools is 5 times $$ what it should be based on weight.

@crystalborne8315

Ай бұрын

I just received my order and it cost $10.12 after tax for 6 spools...Ontario.

This was well done. Thank you!

Hello! Thank you very much for the detailed explanation and suggestions! Great!

@JimMcLaren1950

2 ай бұрын

Hello. Your welcome. Thanks for posting.

Thanks. very good instructions

@jimmclaren3085

17 күн бұрын

Thank you.

Much easier to understand than the manual!

@JimMcLaren1950

Жыл бұрын

Thank you.

Very helpful. Thanks!

@JimMcLaren1950

2 жыл бұрын

Your welcome.

0.95 gauge works too, and lasts a heck of a lot longer than 0.65, great cost saving hack either way with the 0.95 you cant fit it through the guide hole inside the spool, and must use one of the temporary holding holes to start the wire from, and it cannot be pushed through from a parallel orientation, it must be guided through the holes from an end Bit more involved, but whacks through anything

@JimMcLaren1950

Ай бұрын

Thanks for posting. Very informative.

Outstanding!

@JimMcLaren1950

2 жыл бұрын

Thank you.

Great vidoe buddy. Your method works flawlessly with workx weed wacker. Thank you for saying me $15

@JimMcLaren1950

10 ай бұрын

Thank you. Happy my video saved you money.

Great video..Thanks for the help.

@JimMcLaren1950

11 ай бұрын

Your welcomd

Thank you it worked.

@jimmclaren3085

16 күн бұрын

Your welcome.

Thank you wasn’t sure which way the spool goes in

@JimMcLaren1950

9 ай бұрын

Your welcome. Thanks for posting, Happy when my video helped you out.

Thank you. Just bought a pk of the spools. Crap. Now l know to buy the bulk pk of line. Big price difference. Ontario. 🇨🇦🍁💖

@JimMcLaren1950

Жыл бұрын

Spools are Expensive but now you can save some money. Ontario

@sherylldupuis6323

Жыл бұрын

@@JimMcLaren1950 definately big savings. And we all need those 😁TY🇨🇦🍁

Really helpful video, well done, Thx. Just subed!

@JimMcLaren1950

Ай бұрын

Your welcome. Thanks very much for subscribing .

Thank your❤

Thanks for the info.......I have a WG155.

@JimMcLaren1950

Жыл бұрын

Your welcome

@thomask3222

11 ай бұрын

@@JimMcLaren1950 great video, thank you very much. Clear and concise.

@JimMcLaren1950

11 ай бұрын

@@thomask3222 Your welcome.

Does anyone read the manual, why do I never have to use the line feed. But why does the line disappear so fast. Every time you let off trigger & stop, it feeds 1/4 inch of line out automatically.

@IamDoogy

2 жыл бұрын

I haven’t received mine yet. That’s some helpful information. When I run it, I will let off the trigger less frequently so I don’t waste line. Thanks for the tip off. I’m guilty of not always reading all of the manual.

@justtester_9962

Жыл бұрын

What a load of crap! Yes the instructions should be read, but when your last trimmer (Black & Decker) didn't have that feature that I'm aware of, you don't think that every stop and start feeds the line needlessly. lol Still F*dup after going through 2 spools in less than 1/2 hr. 😠

@TheeHolySoldier777

Жыл бұрын

Not going to lie I've been locking up the line and never use the auto feed for like 2 years. Solely because I didn't know about the line feed. I don't know if I've ever seen the manual for my trimmer.

@swolverine4513

11 ай бұрын

I would look for stronger quality spool 🧵 line with a water 💧 logo on it soak it 24 hours and that will help with making your line strong with less snapping

I have been loading my trimmer spool correctly but within less than 5 minutes the entire spool empties out across the lawn. What am I doing wrong. ? So frustrated!!

@JimMcLaren1950

11 ай бұрын

Are you using correct diameter of line. Make sure the spool piece is snapped in place. Is it the Work Trimmer you are using or different model.

What line can I use for a worx model WG 160 , 20 V Max lithium?

@JimMcLaren1950

Жыл бұрын

Line size 0.065

Do you find the "Twisted" replacement line to be better?

@JimMcLaren1950

2 ай бұрын

About the same. Didn't see much of a difference.

@ScottMartinD

2 ай бұрын

@@JimMcLaren1950 Thanks.

@JimMcLaren1950

2 ай бұрын

@@ScottMartinD Your welcome.

I have a question for you Sir. I have the WG 163 GT3.0 and i wonder if I may clean it with a water hose after a few hours of use. Of-course it has a water pipe pressure.There is no comment on this anywhere. i have asked many time about the cleaning method of this trimmer and the only answer i had was to leave it as is. (Leave it dirty )

@JimMcLaren1950

Жыл бұрын

I would be worried about getting the motor wet. If its not sealed water may damage it.

How do you make it feed the line automatically

@JimMcLaren1950

10 ай бұрын

Once you install spool it will automatically feed.

I have string that is stuck up in the head how do I get that out

@JimMcLaren1950

2 күн бұрын

I had string stuck I used pliers to remove it.

Got 10 spools and 2 caps Amazon $25

@JimMcLaren1950

Жыл бұрын

Good price.

Add your own line...lol...you don't t need the whole spool....😂😂😂

10 for 10 bucks on Amazon.

@JimMcLaren1950

2 ай бұрын

Thanks for posting.

Rename this video. Worx hack for rewinding line saves $.

@jimmclaren3085

11 күн бұрын

Thank you Good idea.

Dude your video was 6 mins too long. 30 seconds should explain how to put a spool in and cover it!!! You’re not building a rocket 😅

@GP-ru1bt

Ай бұрын

Then you make a 30sec video. Easy shit

@michaelbarcz326

Ай бұрын

@@GP-ru1bt I did easy shit

What a overkill vid man...wtf were you bored?????