Thanks for the shout-out Mike, you're the greatest!

@robertbentley5150

Жыл бұрын

ive loved everything i have purchased thanks

@mikedixonphoto

Жыл бұрын

@@robertbentley5150 That's great to hear! Thanks!

@MonkeyWoodworks

Жыл бұрын

Yea man, your stuff rock

Literally, we bought everything in this video lol. Worth it! 3rd party/3d party! Wooo!

@MonkeyWoodworks

Жыл бұрын

Agreed, 3rd parties come up with some great ideas!

Thanks, just ordered.

@MonkeyWoodworks

7 ай бұрын

Hope you enjoy it!

Great video! Thanks! Can't wait to grab the clips and markers. I got the stabilizer and rotary attachment a few weeks ago. I'll have to check out the honeycomb, too. That looks promising.

@MonkeyWoodworks

Жыл бұрын

Sure thing! They are some solid accessories.

I just ordered the retaining clips. Those look much better than the included spring clips. Thanks for passing along the information.

@MonkeyWoodworks

Жыл бұрын

The clips work really well.

One of the best videos I have seen. Great job describing this valuable info!! Thank you.

@MonkeyWoodworks

10 ай бұрын

Thank you for your kind words!

Another excellent video. I have ordered those items. Thank you!

@MonkeyWoodworks

Жыл бұрын

Awesome! Hope they are helpful to you!

Oooooo...fabulous. I hope this is all available in Canada! Haven't quite gotten my funds together for the P2 but taking notes for the future. :) Thanks for the great video, as always, Michael.

@MonkeyWoodworks

Жыл бұрын

Thankyou for the kind words and you are welcome!

Thanks Michael

@MonkeyWoodworks

Жыл бұрын

You are welcome!

Great tips!

@MonkeyWoodworks

Жыл бұрын

Glad they were helpful!

Michael, I used your code for the honeycomb, I just cannot find my other comment! Sorry. I bought everything in this video lol. God bless!

@MonkeyWoodworks

Жыл бұрын

Hope you like it (I sure do).

I was thinking of getting the xTool honeycomb until I saw the price. It is nice to know there are cheaper alternatives out there.

@MonkeyWoodworks

10 ай бұрын

The xTool one is pricy. It does have it's advantages however because it is metal and works with magnets. It all depends on your budget.

My p2 is going to be here next week I’m excited. Ive been following you since I got my m1. I really appreciate the detailed videos on the lasers they’ve been very helpful! Im not sure if this has been asked already but, I was wondering what your thoughts were using the honeycomb from the m1 in the p2 for really small things earring etc till I can get a larger one.

@MonkeyWoodworks

11 ай бұрын

You can definitely make the M1 honeycomb work in the P2. In fact, i believe Mike from Lakeshore3D on esty has an adapter to make it work in the P2. If you reach out to him, let him know I sent ya!.

@lizdoesart4712

11 ай бұрын

Ohh good! I'm going to check that out now thank you.

@MonkeyWoodworks

11 ай бұрын

Good Luck! Let me know how it works out.

❤❤

@MonkeyWoodworks

Жыл бұрын

:))

Use batch engraving for many of the same product

@MonkeyWoodworks

9 ай бұрын

True. The batch method is really handy.

I was so looking forward to getting a honeycomb for my P2 but it ships from Germany so that won't work but thanks!

@MonkeyWoodworks

Жыл бұрын

I am guessing there will be more available from other providers / locations. This one took a couple of weeks to arrive in the USA.

@PennysPorch

Жыл бұрын

@@MonkeyWoodworks I think so too

Thank you for this video! I am excited to order some of these items. the Discount code for the Honeycomb says invalid...did it have at time limit?

@MonkeyWoodworks

11 ай бұрын

Let me reach out and ask.

@MonkeyWoodworks

11 ай бұрын

The seller fixed the code. It is working again!

I have a question- would you still recommend M1 after using it for awhile? I’d like to get one, just for hobby/personal use, not business. I’d like to make things out of wood, leather maybe, jewelry, engrave gifts… I’ve been watching a lot of videos and debating between M1 (I like that it’s enclosed, and don’t really care about vinyl cutting, but I guess it might be useful to have) and D1 Pro (I like that it’s more powerful and can do much larger things). I feel P2 is too expensive for my use, even though it’s probably the best, so I’m definitely thinking either M1, D1 Pro or D1 Pro 2 in 1. What’s your opinion? Thanks!! :)

@MonkeyWoodworks

Жыл бұрын

I am really happy with my M1. The only issue I have had with it over the 1+years I have had it is the limited working area. That and it does require maintenance. You will need to clean it from time to time. The P2 definitely has advantages, (can cut ANY acrylic color) and is much more powerful. I do not have a D1 but I do have an Ortur Laser Master 3. The advantage of that one over the M1 is the larger working area and it is a faster laser (can engrave faster).

@Martina1192

Жыл бұрын

@@MonkeyWoodworks thank you!! :)

Does the rotary attachment get to an angle where the insides of rings can be engraved (45° is needed I believe)

@MonkeyWoodworks

Жыл бұрын

The Super Leveler only adjusts to about 15-20 degrees.

@neilrisley6667

Жыл бұрын

@@MonkeyWoodworks not enough to engrave inside rings then...such a shame (for £50 odd I'd expect at least that that could be done too) 😒 Thank you for your reply 😏

@MonkeyWoodworks

Жыл бұрын

Anytime!

Where can you buy those metal business cards?

@MonkeyWoodworks

Жыл бұрын

Those came with my xTool M1 as test material. I believe they have them on their website. Check the video description for my affiliate link to their materials page.

Could you design a 3d model of the P2 riser base? Thanks!!

@MonkeyWoodworks

4 ай бұрын

Sorry, that is above my skill level lol. A few stacked and screwed together 2x4's however work really well. That is what i used before getting the base.

@urko19

4 ай бұрын

@@MonkeyWoodworks do you have a picture of that ?

@MonkeyWoodworks

3 ай бұрын

Message me in FB or IG and I can send you a pic.

What is the size of the honeycomb in this video please. I have just found out the xTool honeycomb is less than 600x300mm & the majority of sheets I use are that size

@MonkeyWoodworks

10 ай бұрын

This honeycomb sits in the same location as the slats taking the place if the slats. I believe the xtool honeycomb sits in the same location.

@neilrisley3443

10 ай бұрын

@MonkeyWoodworks the xTool honeycomb is 550x280mm (I think) Definately not 600x300mm (which would fit better) Is the one in this video a smaller size too? My issue is if I wanted to cut small pieces from a 600x300mm sheet would either honeycomb help?

@neilrisley3443

10 ай бұрын

@MonkeyWoodworks I already ordered the xTool one on launch day for £99 (although it doesn't look like I'll receive it for a few weeks yet) The one in this video would cost £75 (be delivered next week) & I'm wondering should I cancel my xTool order?

@MonkeyWoodworks

9 ай бұрын

Great question. I just wish I had a definite answer for you. It is a tough decision!

Cannot view the material settings or get the code, it does not have the right permissions/not set to public if you have the link I guess.

@MonkeyWoodworks

Жыл бұрын

check video description, i added it there.

@bestyoutubernonegraternumber1

Жыл бұрын

@@MonkeyWoodworkswe requested the permissions for the file too, Mike! Used your code for the joint, too!

@MonkeyWoodworks

Жыл бұрын

I believe i broke the file permissions for about 2-3 hours. You should have access again!

I found code but not till after I ordered it .

@MonkeyWoodworks

Жыл бұрын

Thats too bad! Maybe ask the seller.

@johnballard4633

Жыл бұрын

What size pins would I need for this bef

@MonkeyWoodworks

Жыл бұрын

I reached out to the seller and found out that they are around 6.5mm wide.

YOU DID NOT PUT THE BOLTS BACK DOWN? HOW DARE YOU! LOL jk.

@MonkeyWoodworks

Жыл бұрын

Haha! I feel my videos are WAY too long as it is. I had to keep them out :)

It's a shame the honeycomb is aluminium. Steel is a better choice as you can use magnets for work hold down.

@MonkeyWoodworks

Жыл бұрын

I hear ya. I am sure there will be other 3rd party options in the future and maybe they will be made out of steel.

0:58 No!

@MonkeyWoodworks

5 ай бұрын

Yes?