Truly appreciate you watching the videos! New Merch available - bit.ly/2W68Gqp Heavy Metal here: bit.ly/30wF6wW Support us on Patreon www.patreon.com/whoteewho

@loganverdin6325

3 жыл бұрын

Well I was late this time

@shootingstuffaustralia8977

3 жыл бұрын

Good video mate

@dragonrider385

3 жыл бұрын

Your welcome. I should be ordering some new T's soon. I hope.

@johnsheppard1476

3 жыл бұрын

If you want to reach the limit of velocity for your propellant itself you have to use really much lighter projectiles in your Sabots!I took the .25 ball bearing and when fired from Mosin rifle with a full charge it actually reached the limit of velocity for the powder that is used in this ammunition!By the way the actual result was over 8000 fps!At that speed such a light projectile doesn't have as much energy as the plain and simple regular 7.62×54R because it's a very low weight and so the resulting velocity will represent the limit for the propellant itself..

@lynnrecic4946

3 жыл бұрын

Your factory head space is out of whack, if you're having to crank on the bolt handle like that to get into battery. Not reamed deep enough. No joke. Id have a gun smith check it

Now, part II. Do this again with different powders to actually achieve the speed this cartridge/sabot/bullet combination is capable of. You made a good start but the project deserves more attention. Don't stop, do part two!

Yup all over the place buddy you need to give that rifle some love .

My .22 isn’t quite as powerful or I would be making fun videos Who tee hoo I absolutely love watching you shot any damn thing bro

Another cool production. Thanks.

Great video brother .. if the plate was leaned up against something rather than hanging do you think rounds would have a better chance of going through? By removing the swing the chains give

Could see about getting your hands on sending some 20mm lead at that target.

Hit it with the 50 BMG "SLAP" Round. It'll go through then.

Dammit I was going to bed... .but can't now....one more beer ain't gonna hurt. .

question using a rum 300 using a sabot 556 75gr what kind of range or full data

Out of curiosity, can you melt lead into those divits and sand it? Maybe filling by welding might change the hardening, I don't know, just curious.

@THESLlCK

Жыл бұрын

jb weld it lol

Love your honesty.

This was fun thanks

im in love with that stock..

hey whotee you should try that with the steel resting down on something as when its hanging that swing absorbs alot of the energy

@WHOTEEWHO

3 жыл бұрын

Too dangerous

Cool video man. I'm thinking that maybe the sabots in those aren't seating right, mixed with maybe the wrong kind of powder (though I know less about that)... I've watched all three of the videos with these saboted rounds and the fireball out the barrel looks like there is a lot of unburnt powder. Idk, cool idea though. Be fun to see you play with them more and see if you can get them up to 5k fps.

Fun video. Have a great and safe Labor Day.

just ordered some primeaux targets because you was talking about them in one of your other videos.. looking foreward to making them ring.. a lot lol

@WHOTEEWHO

3 жыл бұрын

Best targets we have. Will last forever.

In the 80s were those types of bullets called accelerators?

That steel looks dangerous as hell. Those divots can send projectiles right back at you.

@WHOTEEWHO

3 жыл бұрын

Yup

@tomserbaducci8559

Жыл бұрын

No shit….my dumb ass shot a piece of 6” thick titanium with 30-06 black tip……I heard it come back over my head and hit the tree behind me. Last time I did that

I am wondering if you could get your hands on some 5.56x45mm M995 AP pulled bullets and some M855A1 EPR pulled bullets and load them into those 300 win mag SABOT's and see what they are capable of.

If you were blind-folded could you feel the recoil difference a .357 mag vs 44 special?

A few years back I shot a 1” inch thick steel plate at about 35 yards with a Winchester.375 H&H Magnum, bullet was a .270 gr. SP this round went three quarters into the steel and budged the back of the plate, that is one awesome round. Not sure what grade of steel it was, just something I dug out of a scrap pile.

@WHOTEEWHO

3 жыл бұрын

😳😳😳

I love that rifle. An awesome video

You should try this again with some of the newer 75-90 grain bullets Barnes, Hornady, Sierra, and Berger have put out. It would be interesting to see how they do.

@WHOTEEWHO

3 жыл бұрын

👍👍

I know who tee who loves the 450 bushmaster, and Paul likes the 458 socom but ya'll need to look at the 45 raptor and do a bal gel test with all three love ya'll

imagine using a pair of those as armor plates.

Thanks for the video. 3 quarter inch is a tuffy.

Well now that was a interesting video and I was pretty sure that if the 50 BMG didn't penetrate it I didn't think those hopped up 300 win mags would either.

Oh yea !!!! Like these sabot rounds

Hey man. I just joined your family brother. Not sure where I have been🤙🇺🇸 Some nice craters😆

@WHOTEEWHO

3 жыл бұрын

heyo!!! thanks for watching!!!

wondering if those are loaded with too slow a powder to burn completely with such light projectiles

@WHOTEEWHO

3 жыл бұрын

🤷‍♂️🤷‍♂️🤷‍♂️

@yaykruser

3 жыл бұрын

Other people got 5 or 6k fps from them

@thomasdaum1927

3 жыл бұрын

He needs to load them with 76 grains of IMR 3031 for4800+ FPS as per a magazine article 30 some years ago.

You should check your shot brass for over pressuring. that may be why it is so hard to get the bolt to unlock.

@miguelperaza6615

Жыл бұрын

Brass should be shoulder bumped so it will fit in chamber🙂

How about the 30-06 with ww2 fmj ammo, my grandad said he could stop a half track with full metal jackets

@user-bn3zo3mh5v

3 жыл бұрын

Yes, my grandfather was in Europe in WWII, but he mostly carried a Thompson on scouting missions. I remember he said he would tape 2 mags together. When the Tommy shot it wanted to rise, so he said if there were multiple targets they learned to turn it sideways and let it climb horizontally instead of throwing rounds in the air. I guess it was light for when it was just 3 or 4 guys doing the scouting. I remember my grandfather talking about being able to tell the German machine guns from the American ones because the cyclic rate was so much faster than ours were. He was really impressed with the German guns. He said there were places where there was so much shooting going on that there wasn't a blade of grass that didn't have a hole in it and some places you would walk a mile without ever putting your foot on the ground because of all the dead bodies. He was in Patton's 3rd Army 5th Division. At battle of the buldge etc. He said EVERY river crossing was a major battle but they just didn't get named. 3rd Army covered more mileage in the shortest amount of time in military history up to that point. I know he said when speaking of Saint-Lo in France that they "Liberated the Hell out of it", hehe. Don't reckon there was much left. I miss my grandfather!

@ozzymandius666

3 жыл бұрын

The Brits used to put .303 bullets in the case backwards to make an AP round in WW1.

@user-bn3zo3mh5v

3 жыл бұрын

@@ozzymandius666 We used to shoot lots of conicals turned bass akwards in muzzleloaders. We even hunted some that way. I don't think they sealed up all that great to get all that speed but I remember my dad shooting a squirrel longways with a 45 Cal ML. It was facing him. It literally turned it inside out with what was left of it's head hanging out it's arse. We we're bored and it was time to leave and needed to shoot the loads out anyways. Never would have believed it had I not seen it. Shot a big spike as it was jumping a fence and running away. Hit it mid air. Went from it's junk all the way up the abdomen and lodged in it's left front shoulder. That was with a 54cal 425gr Hornady Great Plains Hollow Point. They have massive penetration. Only round I have recovered from a deer with that round. It may run a few yards, but it's gonna have a 3 ft of hurt from tail to shoulders.

@user-bn3zo3mh5v

3 жыл бұрын

@@ozzymandius666 That 303 is an underrated cartridge, but on the steep side to shoot. Family has been shooting the 30-06 for hurting since WW1. I would love to try a 243 Win sometime. Seems that would be a great overall round. Light rnds for varmints and heavy for deer and recoil friendly for kids.

That is a tough piece of steel!!

@WHOTEEWHO

3 жыл бұрын

Real tough

Did think they would make it through. 300wm shore use a clean. And that first one eather was load way hot or some up with them.

the Remington Accelerator was a nice idea, you got the speed but lost the accuracy.

Those puppies are COOL!

Very cool...as always....fantastic brother👍☕🍩🇺🇸🇺🇸🇺🇸

@WHOTEEWHO

3 жыл бұрын

🇺🇲🇺🇲🇺🇲

I knocked a hole in a plate just like that one with a green tip seated in a 300WM. It was going way faster than the ones you shoot. Mine clocked in at 4600 FPS

@WHOTEEWHO

3 жыл бұрын

Zingin

Check the head spacing and bullet overall length!

1st shot was on the left middle edge.

You should try the .17 incinerator. A .50 necked down to a .17

I didn’t think they would go through, but would do a bit more. Try some 3” 12 ga slugs!

WTW try a light coat of wheel bearing grease on the bolt lugs Work bolt several times then clean the barrel to make sure no excess grease

@WHOTEEWHO

3 жыл бұрын

👍👍

What caliber has put holes in it? Wasn't it .270 Win? How many times? What bullet weight?

@WHOTEEWHO

3 жыл бұрын

None have....

Another awesome video!! Thank you friend 🇺🇸 🇺🇸 🇺🇸

Id like to see the same test with 165 grain out of the same rifle...

I think you have access to a 22-250, but have you tried a 220 Swift yet? I know both of those are cooking along 4k plus. My grandfather gave me some of the old Remington Accelerators in 30-06 with 22 bullet and sabot. Those used to cook along hot, but were wildly inaccurate. About the only thing they are good for is what you are doing today....plus that plastic would foul the barrel. Been years ago but I seem to remember they would shoot slightly better after a few fouling rounds.

@WHOTEEWHO

3 жыл бұрын

Not tried 22 swift

I love the .300 win mag.!

You should try them on Mr Paul's new stop sign! I'm thinking they'd poke a hole in that. Thanks Adam. Y'all Stay Safe and GOD Bless. 🙏🕊🇺🇸🦅 Whoo_Teee_Whoooo!🤠👍

That crowbar your shooting needs to see paul for awhile

do something with the 7mm-08

You should do 300 wm sabots - how many milk jugs.

You need the 50 BMG SLAP rounds!

Wait so did that .243 make it thru in that one video? Cuz looking at the steel now, it doesn't look like it.

@WHOTEEWHO

3 жыл бұрын

Different piece of steel. Nothing has made it through this one

They just didn’t have enough power, thanks for sharing it with us

@WHOTEEWHO

3 жыл бұрын

Yup

@roger7857

3 жыл бұрын

Thinking the bullets are more varmint rounds than for penetration

Where is your range? West Virginia? Bama?

You’d likely need 50bmg or bigger to penetrate 3/4”. Heard of WW2 fighters taking 20mm to the armory plate behind the pilots and surviving.

cool video

Did more then i thought. But you boys is always surprising me. But hell that 22-250 has been faster then all those. Powered by Hornady. Who-tee-who

Good evening

@WHOTEEWHO

3 жыл бұрын

Hey Steve!

Love the VIDS, keep up ALL the great ideas coming!! However this idea isn't new.. you should try a 50 Cal slapshot.. I bet you'll punch a hole right through that 3/4" AR 500 like butter. Go for it bro!!

@WHOTEEWHO

3 жыл бұрын

Thanks for watching Todd

@toddparis1238

3 жыл бұрын

Actually I've been watching, a lot.. lol and your very welcome my man!!

Monolithic Munitions has a 223 WSSM clocked at 4703. That has GOT to burn up barrels no matter what they say.

@WHOTEEWHO

3 жыл бұрын

Zinging

@redneckgenius

3 жыл бұрын

And then some.

how heavy was the the 5.56 bullet

@WHOTEEWHO

3 жыл бұрын

I dunno

Oh yeah !!

10mm extreme penetrater vs That ar500 plate? :o

If the bolt isn’t closing, we call that a clue. Something isn’t right with either the cartridge or the bolt itself.

@WHOTEEWHO

3 жыл бұрын

🤷‍♂️🤷‍♂️🤷‍♂️

500 Jeffery or 700 Nitro express might do the trick. Good video 👍

AWESOME!!!! I Have A video Request, How Many Water Jugs Can 12 Gauge Buckshot Go Through. That Would Be Cool, And I Want To Find Out. Please Do It Sometime.

@WHOTEEWHO

3 жыл бұрын

Good idea

@JEMMuzic

3 жыл бұрын

@@WHOTEEWHO Yeah!!!! Me And My Brother Shot The Buckshot At A Cinder Block, And it Did Some Damage!!!!

sabot a .22-250 into a 50 bmg with extra powder ?

Awesome 😋

@WHOTEEWHO

3 жыл бұрын

💥💥💥

Thinkin bout ordering some sabots for my mosin

Have you tried hitting that steal with your Lapua ??

@WHOTEEWHO

3 жыл бұрын

Yep. Shot it with everything

The world’s fastest Bullet makes me proud to be a American 😎🇺🇸

@WHOTEEWHO

3 жыл бұрын

🇺🇲🇺🇲🇺🇲

Looks like the sabot might have been the jamming cause. Check for chunks of plastic that might have gotten caught.

@WHOTEEWHO

3 жыл бұрын

🤷‍♂️🤷‍♂️🤷‍♂️

A 50 BMG Ralphs round would be cool to see.

@WHOTEEWHO

3 жыл бұрын

Did that already. That is what made one of those big divots

@jim6292

3 жыл бұрын

WHO_TEE_WHO I just went and watched it, your channel is great keep it up man.

I think you need to check your bolt spacing n get it lapped.

I am interested in to see what .220 Swift would be able to do to plate armor. As a .220 Swift owner, I object to your title that 300WM is the "fastest" round.

@AldoSchmedack

Жыл бұрын

.17 Incinerator... 5883!

Any new Log Splitting Attempts?

@WHOTEEWHO

3 жыл бұрын

Not recently

WHO_TEE_WHO What up brotha!

@WHOTEEWHO

3 жыл бұрын

Whaddup

Some guy here on YT was getting 5000 fps with the 223 sabots so idk why yours are so slow perhaps just the power choice in those

@WHOTEEWHO

3 жыл бұрын

🤷‍♂️🤷‍♂️🤷‍♂️

Imagine how powerful it could be if you did it with a 50 cal cartridge

@WHOTEEWHO

Жыл бұрын

Done 50s in other videos

@dankdaze42069

Жыл бұрын

@@WHOTEEWHO Even sabot like these in this vid or just standard ammo 50 BMG 🤔

I think something is wrong with the sabots with the slow speeds you're getting.

Imagine if you turned a 556 tungsten round and put sabot around it...

@Spartan536

2 жыл бұрын

That would be an M995 AP round, you can find the pulled bullets online, it has a hardened tungsten carbide core.

What about the 3006 accelerators 20 years ago....????

@WHOTEEWHO

3 жыл бұрын

🤷‍♂️🤷‍♂️🤷‍♂️

Makes me wonder if you can shoot some sabplots on a cardboard plate at 100 yards? & see how accurate they are?

@miguelperaza6615

Жыл бұрын

Or how about slow speed , sabots? Say 2300fps?

I’ve watched several videos and don’t see much on the accuracy. Accuracy is very important to me, no matter the velocity of you can’t hit the target what’s the point of shooting the bullet ?

My 270 wsm pushes 90 grain bullet at 3700 FPS

Need to work on that bolt hoss

Can you do a comparison of 30-06 vs 7.62x54r

@WHOTEEWHO

3 жыл бұрын

I have several times before I believe

@spikegriffin5525

3 жыл бұрын

Ok thanks I'll try to find the video

@spikegriffin5525

3 жыл бұрын

Couldn't find the video

@WHOTEEWHO

3 жыл бұрын

kzread.info/dash/bejne/dqOpx6dxpLayh8Y.html

@WHOTEEWHO

3 жыл бұрын

And another kzread.info/dash/bejne/rJlpm69_f9LJj6w.html

If you put a hardened steel in there it would definitely go through can't use a soft metal unexpect it to do hard metal stuff

It’s definitely not the fastest. I’ve seen a 50 bmg sabot round at 4000 plus FPS

Take that bolt and sand and polish it and you won't have that issue start with 400 grit wet dry paper up to 2000 grit then polish it .

@joshd2013

3 жыл бұрын

Or put a bit of cutting compound on it and just sit there and work the bolt for an hr while watching tv or something

Hey who tee who

@WHOTEEWHO

3 жыл бұрын

Hey golden

Load it with some 35,40,45 and 50 gr bullet. Make those things fly.

@WHOTEEWHO

3 жыл бұрын

👍👍

Hay.

Do a 20 mm next

@WHOTEEWHO

3 жыл бұрын

💪💪

30-378 weatherby mag is the worlds fastest .30 caliber bullet surpassing 6000 fps

Need steel core 223 70 grain. Might put a hole in it